Conformational plasticity of DNA secondary structures: probing the conversion between i-motif and hairpin species by circular dichroism and ultraviolet resonance Raman spectroscopies.

The promoter regions of important oncogenes such as BCL2 and KRAS contain GC-rich sequences that can form distinctive noncanonical DNA structures involved in the regulation of transcription: G-quadruplexes on the G-rich strand and i-motifs on the C-rich strand. Interestingly, BCL2 and KRAS promoter i-motifs are highly dynamic in nature and exist in a pH-dependent equilibrium with hairpin and even with hybrid i-motif/hairpin species. Herein, the effects of pH and presence of cell-mimicking molecular crowding conditions on conformational equilibria of the BCL2 and KRAS i-motif-forming sequences were investigated by ultraviolet resonance Raman (UVRR) and circular dichroism (CD) spectroscopies. Multivariate analysis of CD data was essential to model the presence and identity of the species involved. Analysis of UVRR spectra measured as a function of pH, performed also by the two-dimensional correlation spectroscopy (2D-COS) technique, showed the role of several functional groups in the DNA conformational transitions, and provided structural and dynamic information. Thus, the UVRR investigation of intramolecular interactions and of local and environmental dynamics in promoting the different species induced by the solution conditions provided valuable insights into i-motif conformational transitions. The combined use of the two spectroscopic tools is emphasized by the relevant possibility of working in the same DNA concentration range and by the heterospectral UVRR/CD 2D-COS analysis. The results of this study shed light on the factors that can influence at the molecular level the equilibrium between the different conformational species putatively involved in the oncogene expression.

Ligand binding to G-quadruplex DNA: new insights from ultraviolet resonance Raman spectroscopy.

G-Quadruplexes (G4s) are noncanonical nucleic acid structures involved in the regulation of several biological processes of many organisms. The rational design of G4-targeting molecules developed as potential anticancer and antiviral therapeutics is a complex problem intrinsically due to the structural polymorphism of these peculiar DNA structures. The aim of the present work is to show how Ultraviolet Resonance Raman (UVRR) spectroscopy can complement other techniques in providing valuable information about ligand/G4 interactions in solution. Here, the binding of BRACO-19 and Pyridostatin - two of the most potent ligands - to selected biologically relevant G4s was investigated by polarized UVRR scattering at 266 nm. The results give new insights into the binding mode of these ligands to G4s having different sequences and topologies by performing an accurate analysis of peaks assigned to specific groups and their changes upon binding. Indeed, the UVRR data not only show that BRACO-19 and Pyridostatin interact with different G4 sites, but also shed light on the ligand and G4 chemical groups really involved in the interaction. In addition, UVRR results complemented by circular dichroism data clearly indicate that the binding mode of a ligand can also depend on the conformation(s) of the target G4. Overall, these findings demonstrate the utility of using UVRR spectroscopy in the investigation of G4s and G4-ligand interactions in solution.

Crowding and conformation interplay on human DNA G-quadruplex by ultraviolet resonant Raman scattering.

The G-quadruplex-forming telomeric sequence (TTAGGG)4TT was investigated by polarized Ultraviolet Resonance Raman Scattering (UVRR) at 266 nm. The presence of 40% poly(ethylene glycol) and the so-called "self-crowding" condition were used to induce the hybrid-to-parallel topology transition. Analysis of frequency shifts with temperature showed the role of several functional groups in the topological transitions and provides structural dynamical information. Circular dichroism under similar conditions was used as a reference. UVRR shed light on the effect of intramolecular interactions and of local and environmental dynamics in promoting different G-quadruplex topologies, induced by solution conditions or by temperature changes. Overall, these findings showed the enormous potential of this spectroscopy for G-quadruplex conformational studies.

Myelography Iodinated Contrast Media. 2. Conformational Versatility of Iopamidol in the Solid State.

The phenomenon of polymorphism is of great relevance in pharmaceutics, since different polymorphs have different physicochemical properties, e.g., solubility, hence, bioavailability. Coupling diffractometric and spectroscopic experiments with thermodynamic analysis and computational work opens to a methodological approach which provides information on both structure and dynamics in the solid as well as in solution. The present work reports on the conformational changes in crystalline iopamidol, which is characterized by atropisomerism, a phenomenon that influences both the solution properties and the distinct crystal phases. The conformation of iopamidol is discussed for three different crystal phases. In the anhydrous and monohydrate crystal forms, iopamidol molecules display a syn conformation of the long branches stemming out from the triiodobenzene ring, while in the pentahydrate phase the anti conformation is found. IR and Raman spectroscopic studies carried out on the three crystal forms, jointly with quantum chemical computations, revealed that the markedly different spectral features can be specifically attributed to the different molecular conformations. Our results on the conformational versatility of iopamidol in different crystalline phases, linking structural and spectroscopic evidence for the solution state and the solid forms, provide a definite protocol for grasping the signals that can be taken as conformational markers. This is the first step for understanding the crystallization mechanism occurring in supersaturated solution of iopamidol molecules.

"The Good, the Bad and the Ugly" of Chitosans.

The objective of this paper is to emphasize the fact that while consistent interest has been paid to the industrial use of chitosan, minor attention has been devoted to spread the knowledge of a good characterization of its physico-chemical properties. Therefore, the paper attempts to critically comment on the conflicting experimental results, highlighting the facts, the myths and the controversies. The goal is to indicate how to take advantage of chitosan versatility, to learn how to manage its variability and show how to properly tackle some unexpected undesirable features. In the sections of the paper various issues that relate chitosan properties to some basic features and to advanced solutions and applications are presented. The introduction outlines some historical pioneering works, where the chemistry of chitosan was originally explored. Thereafter, particular reference is made to analytical purity, characterization and chain modifications. The macromolecular characterization is mostly related to molecular weight and to degree of acetylation, but also refers to the conformational and rheological properties and solution stability. Then, the antimicrobial activity of chitosan in relation with its solubility is reviewed. A section is dedicated to the formulation of chitosan biomaterials, from gel to nanobeads, exploring their innovative application as active carrier nanoparticles. Finally, the toxicity issue of chitosan as a polymer and as a constructed nanomaterial is briefly commented in the conclusions.

Myelography iodinated contrast media. I. Unraveling the atropisomerism properties in solution.

The present work reports a thorough conformational analysis of iodinated contrast media: iomeprol, iopamidol (the world's most utilized contrast agent), and iopromide. Its main aim is the understanding of the complex structural features of these atropisomeric molecules, characterized by the presence of many conformers with hindered rotations, and of the role of atropisomerism in the physicochemical properties of their aqueous solutions. The problem was tackled by using an extensive analysis of (13)C NMR data on the solutions of whole molecules and of simple precursors in addition to FT-IR investigation and molecular simulations. This analysis demonstrated that out of the many possible atropisomers, only a few are significantly populated, and their relative population is provided. The conformational analysis also indicated that the presence of a sterically hindered amidic bond, allowing a significant population of cis forms (E in iopromide and exo in iomeprol), may be the basis for an increased thermodynamic solubility of concentrated solutions of iomeprol.

Biophysical functionality in polysaccharides: from Lego-blocks to nano-particles.

The objective of the paper is to show the very important biophysical concepts that have been developed with polysaccharides. In particular, an attempt will be made to relate "a posteriori" the fundamental aspects, both experimental and theoretical, with some industrial applications of polysaccharide-based materials. The overview of chain conformational aspects includes relationships between topological features and local dynamics, exemplified for some naturally occurring carbohydrate polymers. Thus, by using simulation techniques and computational studies, the physicochemical properties of aqueous solutions of polysaccharides are interpreted. The relevance of conformational disorder-order transitions, chain aggregation, and phase separation to the underlying role of the ionic contribution to these processes is discussed. We stress the importance of combining information from analysis of experimental data with that from statistical-thermodynamic models for understanding the conformation, size, and functional stability of industrially important polysaccharides. The peculiar properties of polysaccharides in industrial applications are summarized for the particularly important example of nanoparticles production, a field of growing relevance and scientific interest.

Weakly hydrated surfaces and the binding interactions of small biological solutes.

Extended planar hydrophobic surfaces, such as are found in the side chains of the amino acids histidine, phenylalanine, tyrosine, and tryptophan, exhibit an affinity for the weakly hydrated faces of glucopyranose. In addition, molecular species such as these, including indole, caffeine, and imidazole, exhibit a weak tendency to pair together by hydrophobic stacking in aqueous solution. These interactions can be partially understood in terms of recent models for the hydration of extended hydrophobic faces and should provide insight into the architecture of sugar-binding sites in proteins.

Marine polysaccharides in microencapsulation and application to aquaculture: "from sea to sea".

This review's main objective is to discuss some physico-chemical features of polysaccharides as intrinsic determinants for the supramolecular structures that can efficiently provide encapsulation of drugs and other biological entities. Thus, the general characteristics of some basic polysaccharides are outlined in terms of their conformational, dynamic and thermodynamic properties. The analysis of some polysaccharide gelling properties is also provided, including the peculiarity of the charged polysaccharides. Then, the way the basic physical chemistry of polymer self-assembly is made in practice through the laboratory methods is highlighted. A description of the several literature procedures used to influence molecular interactions into the macroscopic goal of the encapsulation is given with an attempt at classification. Finally, a practical case study of specific interest, the use of marine polysaccharide matrices for encapsulation of vaccines in aquaculture, is reported.

Trehalose amorphization and recrystallization.

The stability of the amorphous trehalose prepared by using several procedures is presented and discussed. Amorphization is shown to occur by melting (T(m)=215 degrees C) or milling (room temperature) the crystalline anhydrous form TRE-beta. Fast dehydration of the di-hydrate crystalline polymorph, TRE-h, also produces an amorphous phase. Other dehydration procedures of TRE-h, such as microwave treatment, supercritical extraction or gentle heating at low scan rates, give variable fractions of the polymorph TRE-alpha, that undergo amorphization upon melting (at lower temperature, T(m)=130 degrees C). Additional procedures for amorphization, such as freeze-drying, spray-drying or evaporation of trehalose solutions, are discussed. All these procedures are classified depending on the capability of the undercooled liquid phase to undergo cold crystallization upon heating the glassy state at temperatures above the glass transition temperature (T(g)=120 degrees C). The recrystallizable amorphous phase is invariably obtained by the melt of the polymorph TRE-alpha, while other procedures always give an amorphous phase that is unable to crystallize above T(g). The existence of two different categories is analyzed in terms of the transformation paths and the hypothesis that the systems may exhibit different molecular mobilities.

Physico-chemical properties of aqueous drug solutions: From the basic thermodynamics to the advanced experimental and simulation results.

The physical chemical properties of aqueous solutions of model compounds are illustrated in relation to hydration and solubility issues by using three perspectives: thermodynamic, spectroscopic and molecular dynamics simulations. The thermodynamic survey of the fundamental backgrounds of concentration dependence and experimental solubility results show some peculiar behavior of aqueous solutions with several types of similar solutes. Secondly, the use of a variety of experimental spectroscopic devices, operating under different experimental conditions of dimension and frequency, has produced a large amount of structural and dynamic data on aqueous solutions showing the richness of the information produced, depending on where and how the experiment is carried out. Finally, the use of molecular dynamics computational work is presented to highlight how the different types of solute functional groups and surface topologies organize adjacent water molecules differently. The highly valuable contribution of computer simulation studies in providing molecular explanations for experimental deductions, either of a thermodynamic or spectroscopic nature, is shown to have changed the current knowledge of many aqueous solution processes. While this paper is intended to provide a collective view on the latest literature results, still the presentation aims at a tutorial explanation of the potentials of the three methodologies in the field of aqueous solutions of pharmaceutical molecules.

Molecular Dynamics and Neutron Scattering Studies of Mixed Solutions of Caffeine and Pyridine in Water.

Insight into the molecular interactions of homotactic and heterotactic association of caffeine and pyridine in aqueous solution is given on the basis of both experimental and simulation studies. Caffeine is about 5 times more soluble in a 3 m aqueous pyridine solution than it is in pure water (an increase from ∼0.1 m to 0.5 m). At this elevated concentration the system becomes suitable for neutron scattering study. Caffeine-pyridine interactions were studied by neutron scattering and molecular dynamics simulations, allowing a detailed characterization of the spatial and orientational structure of the solution. It was found that while pyridine-caffeine interactions are not as strong as caffeine-caffeine interactions, the pyridine-caffeine interactions still significantly disrupted caffeine-caffeine stacking. The alteration of the caffeine-caffeine stacking, occasioned by the presence of pyridine molecules in solution and the consequent formation of heterotactic interactions, leads to the experimentally detected increase in caffeine solubility.

Stacking and Branching in Self-Aggregation of Caffeine in Aqueous Solution: From the Supramolecular to Atomic Scale Clustering.

The dynamical and structural properties of caffeine solutions at the solubility limit have been investigated as a function of temperature by means of MD simulations, static and dynamic light scattering, and small angle neutron scattering experiments. A clear picture unambiguously supported by both experiment and simulation emerges: caffeine self-aggregation promotes the formation of two distinct types of clusters: linear aggregates of stacked molecules, formed by 2-14 caffeine molecules depending on the thermodynamic conditions and disordered branched aggregates with a size in the range 1000-3000 Å. While the first type of association is well-known to occur under room temperature conditions for both caffeine and other purine systems, such as nucleotides, the presence of the supramolecular aggregates has not been reported previously. MD simulations indicate that branched structures are formed by caffeine molecules in a T-shaped arrangement. An increase of the solubility limit (higher temperature but also higher concentration) broadens the distribution of cluster sizes, promoting the formation of stacked aggregates composed by a larger number of caffeine molecules. Surprisingly, the effect on the branched aggregates is rather limited. Their internal structure and size do not change considerably in the range of solubility limits investigated.

An antarctic psychrotrophic bacterium Halomonas sp. ANT-3b, growing on n-hexadecane, produces a new emulsyfying glycolipid.

A bacterial strain ANT-3b was isolated at the sea-ice seawater interface from Terra Nova Bay station, Ross Sea, Antarctica. It was isolated on mineral medium supplemented with 2% diesel fuel as a sole carbon and energy source and grown routinely on 2% n-hexadecane. Analysis of 16S rRNA gene sequence indicates that the strain has 99.8% sequence similarity with Halomonas neptunia. The strain ANT-3b was grown in mineral medium supplemented with n-hexadecane between 4 and 20 degrees C, but not at 30 degrees C. The maximum degradation rate of the n-alkane was measured at 15 degrees C, with 5.6+/-1.7 mg O2 microg(-1) protein d(-1). The strain ANT-3b produced emulsifying compounds when grown on n-hexadecane, but not on mineral medium supplemented with D-fructose. A preliminary characterisation of the emulsifier was carried out. The lipid moiety contained a mixture of fatty acids with a following composition in molar ratio: caprylic acid 18.85, myristic acid 1.0, palmitic acid 9.68, palmitoleic acid 5.69 and oleic acid 1.26. The polysaccharide moiety also contained a mixture of sugars with the following molar ratio: mannose 1.71, galactose 1.00 and glucose 2.96. The molecular weight of the glycolipid component determined by gel permeation chromatography was in the 18 kDa range and contained smaller fragments, possibly oligomeric contaminants. Transmission electron microscopy showed contact between the glycolipid secreted by the strain and n-hexadecane broken down to nanodroplets at the water interface, to form a material with mesophase (liquid crystal) organisation.

The disordered conformation of kappa-carrageenan in solution as determined by NMR experiments and molecular modeling.

The conformation of kappa-carrageenan in solution was studied combining 1H and 13C NMR with molecular mechanics. The experimental conditions were chosen to characterize the disordered conformation of the polymer. Particular attention has been given to explore a wide range of experimental conditions as to the dependence on solvent (water and Me2SO), polymer concentration, temperature, pH, presence of a denaturing agent (guanidinium chloride), and of ions otherwise able to induce conformational order of the carrageenan chains, either in solution (I-) or in the gel state (Rb+). Two-dimensional NOE experiments were analyzed to obtain information on internuclear distances, and molecular mechanics provided the range of energetically accessible conformations. Two inter-residue topological constraints were clearly identified: their combination is rather restricting for the chain and suggests that the disordered conformation of kappa-carrageenan is characterized by an intrinsic stiffness with high values of persistent length and characteristic ratio. They also rule out any postulated interchain hydrogen bonds. In contrast, experiments on the temperature dependence of the chemical shift in Me2SO reveal the existence of two inter-residue intramolecular H-bonds which might contribute positively to the rigidity of the polymer chain. The overall picture emerging from the present results is that of a locally elongated 'loose single helix'.

Hyaluronan chain conformation and dynamics.

An overview of the present state of research in the field of hyaluronan chain conformational aspects is presented. The relationship between structure and dynamics are illustrated for a series of hyaluronan oligomers. Conformational characteristics of hyaluronan chains are discussed, together with the dynamic chain patterns, evaluated by using a theoretical approach to diffusive polymer dynamics. The dependence of correlation times and NMR relaxation parameters from the chain dimension are investigated. Topological features and dimensional properties are related to the structural determinants by using classical computational methods of molecular mechanics and Monte Carlo simulation.

The kinetics of periodate oxidation of carbohydrates 2. Polymeric substrates.

A study of the kinetics of periodate oxidation on a series of dextran oligomers and polymers is carried out by isothermal microcalorimetry. In addition to these substrates, some dimeric carbohydrates and hyaluronan were studied. Rate constants were calculated from the calorimetric decay curves, which, properly corrected for calorimetric response, are proportional to the rate of periodate conversion. The dependence of the kinetic rates on the molecular weight of dextran samples and on the substrate concentration, is described in terms of the much higher rates of terminal reducing units. The presence of two sites with comparable reaction rates makes the analysis of the calorimetric curves difficult, even in the simple overall pseudo-first-order condition. The suitability of a phenomenological treatment of kinetic data is explored.

A general criterion based on the implicit function theorem to model aggregation and adsorption in colloidal dispersions.

This paper, which may interest not only colloid scientists and physical chemists but also applied mathematicians, completes some previous results on aqueous silicon nitride dispersions. Experimental data on adsorption from liquid solution were first obtained by a titration method and then used to derive the number of solid particles from an equilibrium constraint. To discuss the complex mechanisms affecting simultaneous solid particle aggregation and small ion adsorption at the solid/liquid interface, the Dini implicit function theorem (DT) has been applied to the equilibrium condition for a former suspension Gibbs free energy. It was able to relate the average particle number to the ion concentration adsorbed, but not to unequivocally specify their dependence on the liquid phase pH. We attempt here to model aggregation both through bulk and interfacial quantities. The generalized DT-based criterion has first been formulated in all generality, and then adopted according to a wider investigation. The results obtained confirm the original guess, i.e., to regard solid aggregation as dominated by interfacial mechanisms.

The Interaction of Sorbitol with Caffeine in Aqueous Solution.

Molecular dynamics simulations were carried out on a system of caffeine interacting with the sugar alcohol sorbitol. The system examined had a caffeine concentration 0.083 m and a sugar concentration 1.08 m. The trajectories of all molecules in the system were collected over a period of 80 ns and analyzed to determine whether there is any tendency for sorbitol to bind to caffeine, and if so, by what mechanism. The results show that the sorbitol molecules have an affinity for the caffeine molecules and that the binding occurred by the interaction of the aliphatic hydrophobic protons of the sugar with the caffeine face. This intermolecular association via face-to-face stacking, as suggested by simulation studies, is similar to that found for sucrose and for D-glucose, which overwhelmingly exists in the pyranose ring chair form in aqueous solution, as well as for caffeine-caffeine association. The sorbitol molecules, however, exist as relatively extended chains and are, therefore, topologically quite different from the sugars sucrose and glucose. The comparison of the average conformation of sorbitol molecules bound to caffeine with that of molecules in the free state shows a substantial similarity.

Chitosan nanoparticles: preparation, size evolution and stability.

PURPOSE: Characterisation of chitosan-tripolyphosphate nanoparticles is presented with the aim of correlating particle shape and morphology, size distribution, surface chemistry, and production automatisation with preparation procedure, chitosan molecular weight and loaded protein. METHODS: Nanoparticles were prepared by adding drop wise a tripolyphosphate-pentasodium solution to chitosan solutions under stirring. Trehalose, mannitol and polyethylene-glycol as bioprotectants were used to prevent particle aggregation and to reduce mechanical stress during freezing and drying processes. RESULTS: As a novel result, time evolution of the particle size distribution curve showed the presence of a bimodal population composed of a fraction of small particles and of a second fraction of larger particles attributed to the rearrangement of particles after the addition of tripolyphosphate. Storage for 4 weeks resulted in a slight increase in average size, due to the continuous rearrangement of small particles. Improvement of nanoparticle stability after lyophilisation and spray-drying was observed in the presence of all bioprotectants. Trehalose was the best protectant for both methods. Finally, in vivo tests using chick embryos assessed the biocompatibility of chitosan, tripolyphosphate and the nanoparticles. CONCLUSION: The simple ionotropic gelation method with low-MW chitosan was effective in achieving reproducible nanoparticles with the desired physico-chemical and safety characteristics.