Climate velocities and species tracking in global mountain regions.

Mountain ranges contain high concentrations of endemic species and are indispensable refugia for lowland species that are facing anthropogenic climate change1,2. Forecasting biodiversity redistribution hinges on assessing whether species can track shifting isotherms as the climate warms3,4. However, a global analysis of the velocities of isotherm shifts along elevation gradients is hindered by the scarcity of weather stations in mountainous regions5. Here we address this issue by mapping the lapse rate of temperature (LRT) across mountain regions globally, both by using satellite data (SLRT) and by using the laws of thermodynamics to account for water vapour6 (that is, the moist adiabatic lapse rate (MALRT)). By dividing the rate of surface warming from 1971 to 2020 by either the SLRT or the MALRT, we provide maps of vertical isotherm shift velocities. We identify 17 mountain regions with exceptionally high vertical isotherm shift velocities (greater than 11.67 m per year for the SLRT; greater than 8.25 m per year for the MALRT), predominantly in dry areas but also in wet regions with shallow lapse rates; for example, northern Sumatra, the Brazilian highlands and southern Africa. By linking these velocities to the velocities of species range shifts, we report instances of close tracking in mountains with lower climate velocities. However, many species lag behind, suggesting that range shift dynamics would persist even if we managed to curb climate-change trajectories. Our findings are key for devising global conservation strategies, particularly in the 17 high-velocity mountain regions that we have identified.

Converting ash into reusable slag at lower carbon footprint: Vitrification of incineration bottom ash in MSW-fueled demonstration-scale slagging gasifier.

Globally waste incineration is becoming the predominant treatment method of solid waste. The largest fraction of solid residue of this process is incineration bottom ash (IBA) requiring further treatment before applications such as in the construction industry become feasible. In this study, vitrification of IBA was conducted in a demonstration-scale high-temperature slagging gasification plant fueled with MSW and biomass charcoal as a green auxiliary fuel. High IBA co-feeding rates of up to 491 kg/h (equivalent to 107% of MSW feeding rate) were achieved during the trials. A highly leaching-resistant slag immobilizing heavy metals in the glass-like amorphous structure and recyclable iron-rich metal granules were generated in the process. The heavy metal migration into the solid by-product fractions depended on the IBA feeding rates and process conditions such as cold cap temperature, charcoal-to-ash ratio, and gasifier temperature profile. Slaked lime and activated carbon powder were used in a dry flue gas treatment and stack gas emissions were kept well below Singapore's regulatory limits. Steam from the hot flue gas was generated in a boiler to drive a steam turbine. The application of biomass charcoal instead of fossil fuels or electricity lead to a lower carbon footprint compared to alternative vitrification technologies. The overall results reveal promising application of high temperature slagging gasification process for commercial-scale vitrification of IBA.

Ion-selective membrane modified microfluidic paper-based solution sampling substrates for potentiometric heavy metal detection.

Paper-based microfluidic solution sampling is a viable option for potentiometric sensors to be used for the determination of analytes in samples with high solid-to-liquid ratios. Unfortunately, heavy metal sensitive electrodes cannot be easily integrated with paper-based solution sampling as heavy metals have strong physicochemical adsorption affinity towards paper substrates. In this work, paper substrates were modified with an ion-selective membrane (ISM) cocktail (used for the preparation of Pb2+-ion-selective electrodes (ISEs)) and coupled with model heavy metal Pb2+-ISEs. It was found that the super-Nernstian response of Pb2+-ISEs was eliminated when 10 to 50 mg ml-1 of the ISM cocktail was used for the modification of paper substrates. The modification of the paper substrates by Pb2+-ISM allowed the elimination of adsorption sites. In addition, it resulted in an improvement of sensor performance in terms of their detection limits to be similar to those for conditioned electrodes in standard beaker-based measurements. It is believed that the elimination of super-Nernstian response of the electrodes and improving the potentiometric responses and detection limits of ISEs were attributed to the compatibility improvement of the paper substrates and Pb2+-ISEs to the same type of ISM.

Impacts of pyrolysis temperatures on physicochemical and structural properties of green waste derived biochars for adsorption of potentially toxic elements.

This study comparatively investigated the influence of changes in pyrolysis temperature on the physicochemical, structural, and adsorptive properties of biochars derived from a green waste (Cynodon dactylon L.). For this purpose, the biophysically dried green wastes were pyrolyzed at 400 °C, 600 °C, and 800 °C under the same pyrolysis conditions. The results revealed that the physicochemical and structural properties were varied, depending upon the pyrolysis temperatures. With the increase of pyrolysis temperature, the surface functional groups were escaped, the structure became more porous (pore volume of 0.089 ± 0.001), the metal oxides were remained consistent, and the biochars turned into more alkaline nature (pH of 11.9 ± 0.2). Furthermore, as referring to the adsorptive performance for potentially toxic elements, with experimental adsorption capacity of up to 33.7 mg g-1 and removal rate up to 96% for a multi-metals containing solution, the biochars pyrolyzed at high temperature (800 °C) was significantly (p < 0.05) higher than those pyrolyzed at low temperature (400 °C). According to the physicochemical and structural properties, and the adsorptive performances of the biochars, the optimal pyrolysis temperature was herein recommended to be 800 °C.

A novel real-time monitoring and control system for waste-to-energy gasification process employing differential temperature profiling of a downdraft gasifier.

A novel, cost-effective and real-time process monitoring and control system was developed to maintain stable operation of waste-to-energy gasification process. It comprised a feedback loop control that utilized the differential temperatures of the oxidation and reduction zones in the gasifier to determine the regional heat-flow (endothermic or exothermic), to assess the availability of oxidizing agent (for instance, air or O2) at the char bed and to calculate the fuel feeding rate. Based on the correlations developed, the air-to-fuel ratio or the equivalence air ratio (ER) for air gasification could be instantaneously adjusted to maintain stable operation of the gasifier. This study demonstrated a simplification of complex reaction dynamics in the gasification process to differential temperature profiling of the gasifier. The monitoring and control system was tested for more than 70 h of continuous operation in a downdraft fixed-bed gasifier with refuse-derived fuel (RDF) prepared from municipal solid wastes (MSW). With the system, fuel feeding rate could be adjusted accurately to stabilize the operating temperature and ER in the gasifier and generate syngas with consistent properties. Significant reductions in the fluctuations of temperature profiles at oxidation and reduction zones (from higher than 100 °C to lower than 50 °C), differential temperatures (from ±200 to ±50 °C) in gasifier and the flow rate (from 16 ±â€¯6.5 to 12 ±â€¯1.8 L/min), composition of main gas components, LHV (from 6.2 ±â€¯3.1 to 5.7 ±â€¯1.6 MJ/Nm3) and tar content (from 8.0 ±â€¯9.7 to 7.5 ±â€¯4.2 g/Nm3) of syngas were demonstrated. The developed gasifier monitoring and control system is adaptable to various types (updraft, downdraft, and fluidized-bed) and scales (lab, pilot, large scale) of gasifiers with different types of fuel.

Reclaimed seawater discharge - Desalination brine treatment and resource recovery system.

With the proliferation of reverse osmosis technology, seawater reverse osmosis desalination has been heralded as the solution to water scarcity for coastal regions. However, the large volume of desalination brine produced may pose an adverse environmental impact when directly discharged into the sea and result in energy wastage as the seawater pumped out is dumped back into the sea. Recently, zero liquid discharge has been extensively studied as a way to eliminate the aquatic ecotoxicity impact completely, despite being expensive and having a high carbon footprint. In this work, we propose a new strategy towards the treatment of brine to seawater level for disposal, dubbed reclaimed seawater discharge (RSD). This process is coupled with existing resource recovery techniques and waste alkali CO2 capture processes to produce an economically viable waste treatment process with minimal CO2 emissions. In this work, we placed significant focus on the electrolysis of brine, which simultaneously lowers the salinity of the desalination brine (56.0 ± 2.1 g/L) to seawater level (32.0 ± 1.4 g/L), generates alkali brine from seawater (pH 13.6) to remove impurities in brine (Mg2+ and Ca2+ to below ppm level), and recovers magnesium hydroxide, calcium carbonate, chlorine, bromine, and hydrogen gas as valuable resources. The RSD is further chemically dechlorinated and neutralised to pH 7.3 to be safe to discharge into the sea. The excess alkali brine is used to capture additional CO2 in the form of bicarbonates, achieving net abatement in climate change impact (9.90 CO2 e/m3) after product carbon abatements are accounted.

Evaluating fresh and hardened properties of mortar composite with different types of modified polyethylene terephthalate (PET) materials as additives: Modification effects, surface properties, shape factors.

Plastic disposal has become a challenge due to its challenging degradability, and plastics recycling is one of the ideal methods. The utilization of recycled plastic in building materials has been widely researched as a possible way to store plastics permanently. An investigation on the modification and incorporation of polyethylene terephthalates (PET) on fresh and hardened properties of mortar composites (MCs) is performed in the study. The work provides understanding of the synergistic effects of plastic modification methods with different types of PET additives on MC properties and to explain behavior of modified PET in mortar composites. Modification methods include microwave radiation, chemicals oxidation and alkaline hydrolysis. These methods are applied on three types of structural PET materials (hard particles, hard strips and soft yarns). The properties of 0.5%-3% PET added MCs include workability, compressive strength (CS), flexural strength (FS) and toughness are determined. At 28 days, 3% hydrolysis-treated PET yarns significantly increased FS by 69.6% and improved toughness by almost 15 times while CS with 3% PET particles modified by microwave radiation and chemicals oxidation were comparable to the control.

Unveiling key impact parameters and mechanistic insights towards activated biochar performance for carbon dioxide reduction.

Chemically activated biochar is effective in supercapacitors and water splitting, but low conductivity hinders its application as a carbon support in carbon dioxide reduction reaction (CO2RR). Based on the observed CO2RR performance from potassium hydroxide (KOH)-activated biochar, increased microporosity was hypothesized to enhance the performance, leading to selection of potassium carbonate (K2CO3) for activation. K2CO3 activation at 600℃ increased microporosity significantly, yielding a total Faradaic efficiency of 72%, compared to 60% with KOH at 800℃. Further refinement of thermal ramping rate enriched micropore content, directly boosting FEC to 82%. Additionally, K2CO3's lower activation temperature could preserve hydroxyl groups to improve ethylene selectivity. These findings demonstrate that optimizing microporosity and surface chemistry is critical for designing activated biochar-based CO2RR electrocatalysts. Despite lower electrical conductivity of activated biochar, selecting the appropriate activating agents and conditions can make it a viable alternative to carbon black-based electrocatalysts.

Technical and environmental assessment of sludge-derived slag generated from high temperature slagging co-gasification process as a sustainable construction material.

Tremendous amount of sludge is generated annually from freshwater treatment or sewage. The high temperature slagging co-gasification converts the sludge to slag showing the potential application for construction material. In this study, the physico-chemical properties of 4 types of slags generated from the co-gasification of municipal solid waste (MSW) with sludge from freshwater treatment or sewage, and ashes from sludge incineration are comprehensively analyzed. Leaching performance of the sludge-derived slag and mortar (with slag as the fine aggregate), as determined based on Toxicity Characteristic Leaching Procedure (TCLP), batch leaching and column leaching tests, indicates the slag can be considered safe for reutilization. Compressive strength test demonstrates that the mortars perform excellently and have the potential to replace sand in concrete production. The consolidation coefficient of slag (1.6 - 39.1 m2/year) is lower than the sandy silt but higher than clay. Additionally, the coefficient of permeability (∼1.96 × 10-3 m/s), angle of shearing resistance (∼39°), and undrained shear strength (375.5 ± 54.8 kPa) of the slag are comparable to sand. The life cycle assessment (LCA) is also conducted to evaluate the environmental impacts and benefits of reutilizing sludge-derived slag as an alternative material for concrete production and land reclamation.

The impact of pharmacist interventions, follow-up frequency and default on glycemic control in Diabetes Medication Therapy Adherence Clinic program: a multicenter study in Malaysia.

BACKGROUND: Pharmacist's involvement in optimizing medication adherence among diabetic patients has been implemented for over a decade. Diabetes Medication Therapy Adherence Clinic (DMTAC) was set up to educate diabetic patients, monitor treatment outcomes, and manage drug-related problems. While evidence shows that pharmacist-led DMTAC was effective in reducing HbA1c, there was limited data regarding the impact of different intervention types and default to follow-up on glycemic control. AIM: To assess the impact DMTAC on glycemic control and the difference in glycemic control between hospital and health clinic settings as well as defaulter and non-defaulter. In addition, the impact of pharmacist's interventions, DMTAC follow-up frequencies, and duration of diabetes on glycemic control were also determined. METHODS: A retrospective study was conducted among diabetes patients under DMTAC care between January 2019 and June 2020 in five hospitals and 23 primary health clinics. Patients' demographics data, treatment regimens, frequencies of DMTAC visits, defaulter (absent from DMTAC visits) and types of pharmacists' intervention were retrieved from patients' medical records and electronic database. HbA1c was collected at baseline, 4-6 months (post-1), and 8-12 months (post-2). RESULTS: We included 956 patients, of which 60% were females with a median age of 58.0 (IQR: 5.0) years. Overall, the HbA1c reduced significantly from baseline (median: 10.2, IQR: 3.0) to post-1 (median: 8.8, IQR: 2.7) and post-2 (median: 8.3, IQR: 2.6%) (p < 0.001). There were 4317 pharmacists' interventions performed, with the majority being dosage adjustment (n = 2407, 55.8%), followed by lab investigations (849, 19.7%), drugs addition (653, 15.1%), drugs discontinuation (408, 9.5%). Patients treated in hospitals received significantly more interventions than those treated in primary health clinics (p < 0.001). We observed significantly less reduction in HbA1c in DMTAC follow-up defaulters than non-defaulters after 1 year (- 1.02% vs. - 2.14%, p = 0.001). Frequencies of DMTAC visits (b: 0.19, CI: 0.079-0.302, p = 0.001), number of dosage adjustments (b: 0.83, CI: 0.015-0.151, p = 0.018) and number of additional drugs recommended (b: 0.37, CI: 0.049-0.691, p = 0.024) had positive impact on glycemic control whereas duration of diabetes (b: - 0.0302, CI: - 0.0507, - 0.007, p = 0.011) had negative impact. CONCLUSION: Glycemic control improved significantly and sustained up to one year among patients in pharmacists-led DMTAC. However, DMTAC defaulters experienced poorer glycemic control. Considering more frequent visits and targeted interventions by pharmacists at DMTAC resulted in improved HbA1c control, these strategies should be taken into account for future program planning.

A global phylogeny of butterflies reveals their evolutionary history, ancestral hosts and biogeographic origins.

Butterflies are a diverse and charismatic insect group that are thought to have evolved with plants and dispersed throughout the world in response to key geological events. However, these hypotheses have not been extensively tested because a comprehensive phylogenetic framework and datasets for butterfly larval hosts and global distributions are lacking. We sequenced 391 genes from nearly 2,300 butterfly species, sampled from 90 countries and 28 specimen collections, to reconstruct a new phylogenomic tree of butterflies representing 92% of all genera. Our phylogeny has strong support for nearly all nodes and demonstrates that at least 36 butterfly tribes require reclassification. Divergence time analyses imply an origin ~100 million years ago for butterflies and indicate that all but one family were present before the K/Pg extinction event. We aggregated larval host datasets and global distribution records and found that butterflies are likely to have first fed on Fabaceae and originated in what is now the Americas. Soon after the Cretaceous Thermal Maximum, butterflies crossed Beringia and diversified in the Palaeotropics. Our results also reveal that most butterfly species are specialists that feed on only one larval host plant family. However, generalist butterflies that consume two or more plant families usually feed on closely related plants.

High temperature slagging gasification of municipal solid waste with biomass charcoal as a greener auxiliary fuel.

During high temperature slagging gasification of municipal solid waste (MSW), coal coke is typically used as an auxiliary fuel to maintain the high temperature in the gasifier and convert ashes into slag. Herein, biomass charcoal was utilized as a greener and more sustainable auxiliary fuel to replace the coal coke during stable and continuous gasification of MSW. Several monitoring characteristics were assessed, like operating conditions of the gasifier, influence of local MSW properties generated in Singapore, environmental impacts, and main by-products (slag, fly ash and metals). The performance data revealed that the replacement of coal coke with biomass charcoal provided significant environmental benefits. The use of biomass charcoal resulted in 78% less SO2 emissions, and 22% less generated fly ash because the lower sulfur content in biomass charcoal resulted in a 32% reduced use of sorbent for flue gas treatment. Furthermore, there was clear evidence of a 22% carbon footprint reduction due to replacing fossil fuel as auxiliary fuel. In addition, the slag characteristics demonstrated lower heavy metals leaching as compared to the incineration bottom ash generated from the conventional MSW incineration plant suggesting its great potential in the application as clean and green waste-derived material in the construction industry.

Technical and environmental assessment of laboratory scale approach for sustainable management of marine plastic litter.

Laboratory scale recycling of marine plastic litter consisting of polyethylene terephthalate (PET) bottle sorting, pyrolysis and chemical vapor deposition (CVD) was conducted to identify the technical and environmental implications of the technology when dealing with real waste streams. Collected seashore and underwater plastics (SP and UP, respectively) contained large quantities of PET bottles (33.2 wt% and 61.4 wt%, respectively), suggesting PET separation was necessary prior to pyrolysis. After PET sorting, marine litter was converted into pyrolysis oil and multi-walled carbon nanotubes (MWCNTs). Water-based washing of litter prior to pyrolysis did not significantly change the composition of pyrolysis products and could be avoided, eliminating freshwater consumption. However, distinct differences in oil and MWCNT properties were ascribed to the variations in feedstock composition. Maintaining consistent product quality would be one of challenges for thermochemical treatment of marine litter. As for the environmental implications, life cycle assessment (LCA) demonstrated positive benefits, including improved climate change and fossil depletion potentials. The highest positive environmental impacts were associated with MWCNT production followed by pyrolysis oil and PET recovery. The benefits of proposed approach combining PET sorting, pyrolysis and CVD allowed to close the waste loop by converting most of the marine litter into valuable products.

A high-throughput multispectral imaging system for museum specimens.

We present an economical imaging system with integrated hardware and software to capture multispectral images of Lepidoptera with high efficiency. This method facilitates the comparison of colors and shapes among species at fine and broad taxonomic scales and may be adapted for other insect orders with greater three-dimensionality. Our system can image both the dorsal and ventral sides of pinned specimens. Together with our processing pipeline, the descriptive data can be used to systematically investigate multispectral colors and shapes based on full-wing reconstruction and a universally applicable ground plan that objectively quantifies wing patterns for species with different wing shapes (including tails) and venation systems. Basic morphological measurements, such as body length, thorax width, and antenna size are automatically generated. This system can increase exponentially the amount and quality of trait data extracted from museum specimens.

Assessment of industrial wastewater for potentially toxic elements, human health (dermal) risks, and pollution sources: A case study of Gadoon Amazai industrial estate, Swabi, Pakistan.

In this study, industrial wastewater and groundwater were comparatively investigated for their physicochemical properties, concentrations of potentially toxic elements (PTEs), human health risks and pollution source(s). Every month, 34 wastewater samples and 26 groundwater samples were collected, for a duration of one year. The results showed that the physicochemical parameters and concentrations of PTEs in the industrial wastewater exceeded the maximum permissible limits of Pakistan Environmental Protection Agency (2000). Specifically, it was found that total dissolved solids (5%), total suspended solids (190%), chemical oxygen demand (107%), five-days biochemical oxygen demand (5.7 times), grease/oil (27.1 times), Fe (67%), Zn (29%), Mn (32%), Cu (27%), Ni (16%), Cr (8%), Pb (106%), and Cd (80%) were higher than the permissible limits. The carcinogenic and non-carcinogenic dermal health risks for wastewater irrigation group were significantly higher than the groundwater irrigation group. The hazard index of irrigation with industrial wastewater was 180 times higher than the groundwater. The principal component analysis indicated that industry was the main polluting source. The cluster analysis results of all PTEs (except Fe) were found in the same clade in the dendrogram, which showed a strong similarity within the monthly data set of the whole year. The study recommends using adjacent groundwater instead of industrial wastewater for irrigation purposes.

Redistribution of mineral phases of incineration bottom ash by size and magnetic separation and its effects on the leaching behaviors.

Size and magnetic separation of incineration bottom ash (IBA) are common for ferrous metals recovery, however, their influences on the mineral phase and the element redistribution, and subsequently the induced variation of metal leaching potential herein remain limited understanding. The lack of research in this field may misunderstand IBA performances, cause confused results for comparison among various studies, and potentially lead to biased conclusions. We herein quantitatively investigate the effects of size and magnetic separation on the IBA based on element distribution, leaching behavior, morphology, and mineralogy with statistical analysis. For preparation, sieving was performed with the original IBA (to obtain 7 size-fractions termed as OR1-7, respectively), followed by magnetic separation of each, to further yield magnetic fractions (MF1-7) to discriminate nonmagnetic fractions (NF1-7). In this study, we show that size and magnetic separation may pose significant yet different impacts on different fractions, which would affect their leaching potential concerning their respective downstream applications.

Effects of different biochars on physicochemical properties and immobilization of potentially toxic elements in soil - A geostatistical approach.

The impact of different biochars (BCs) on the physicochemical properties and immobilization of potentially toxic elements (PTEs) in contaminated soil irrigated with industrial wastewater for the last three decades was studied. Furthermore, the efficacy of applied BCs in reducing geostatistical risks was also evaluated. For this purpose, BCs were prepared from green waste (Cynodon dactylon L.) for the first time at different pyrolysis temperature (400 °C, 600 °C and 800 °C), and amended the contaminated soil in pots with two different ratios of 2% and 5% (w/w) under controlled conditions. The BCs amended soil samples were analyzed after five months (equivalent to the life span of a wheat crop). The physicochemical impacts of applied BCs on the soil showed that the acidic soil was changed to basic. A tremendous increase in water holding capacity, cation exchange capacity, dissolved organic carbon, carbon, phosphorus and potassium contents was observed. The PTEs concentrations and geostatistical risks were significantly (p ≤ 0.05) decreased by all the BCs. Among them, BC prepared at 800 °C and applied at a ratio of 5% was showed the best effects by reducing the bioavailable concentrations of Cd, Pb, Cr, Ni, Cu, Mn, Fe, As, Co and Zn in 88%, 87%, 78%, 76%, 69%, 65%, 64%, 63%, 46% and 21%, respectively. Similarly, significant (p ≤ 0.05) reductions in geoaccumulation index, enrichment factor, contamination factor, and ecological risk were recorded. Therefore, BC prepared at 800 °C and applied at a ratio of 5% is recommended for soil remediation.

In situ catalytic reforming of plastic pyrolysis vapors using MSW incineration ashes.

The valorization of municipal solid waste incineration bottom and fly ashes (IBA and IFA) as catalysts for thermochemical plastic treatment was investigated. As-received, calcined, and Ni-loaded ashes prepared via hydrothermal synthesis were used as low-cost waste-derived catalysts for in-line upgrading of volatile products from plastic pyrolysis. It was found that both IBA and air pollution control IFA (APC) promote selective production of BTEX compounds (i.e., benzene, toluene, ethylbenzene, and xylenes) without significantly affecting the formation of other gaseous and liquid species. There was insignificant change in the product distribution when electrostatic precipitator IFA (ESP) was used, probably due to the lack of active catalytic species. Calcined APC (C-APC) demonstrated further improvement in the BTEX yield that suggested the potential to enhance the catalytic properties of ashes through pre-treatment. By comparing with the leaching limit values stated in the European Council Decision, 2003/33/EC for the acceptance of hazardous waste at landfills, all the ashes applied remained in the same category after the calcination and pyrolysis processes, except the leaching of Cl- from the ESP, which was around the borderline. Therefore, the use of ashes in catalytic reforming application do not significantly deteriorate their metal leaching behavior. Considering its superior catalytic activity towards BTEX formation, C-APC was loaded with Ni at 15 and 30 wt%. The Ni-loading favored an increase in overall oil yield, while reducing the gas yield when compared to the benchmark Ni loaded ZSM catalyst. However, Ni addition also caused the formation of more heavier hydrocarbons (C20-C35) that would require post-treatment to recover favorable products like BTEX.

Kinetics and modeling of trace metal leaching from bottom ashes dominated by diffusion or advection.

Leaching kinetics of trace metals from incineration bottom ashes (IBA) under diffusion and advection were investigated through leaching tests of compacted granulars of IBAs and their packed columns with seawater eluent for 64 days and 26 days, respectively. Metal fluxes were distinct among species while linearily decreased at log-log scales as a function of time. Short-term environmental risks for Cu, Ni and Pb were identified under advection. The metal leaching behavior generally followed the pseudo-second order under diffusion, while the pseudo-first order kinetics under advection. Investigated metals may be further identified as diffusion- (As, Cd, Cr, Sb) and advection-dominant species (Ba, Cu, Ni, Pb, Zn) according to their fluxes, which interestingly corresponded to the low- (5.19-147.90 mg·kg-1) and high-value (116.46-2398.44 mg·kg-1) of their metal distribution from IBAs, respectively. Considering the general higher metal release, decay models were employed to simulate the column leaching results. Particularly, Type-II model based on two-site assumptions fit much better to the experimental data, unveiling significant yet retarded release (in 1-2 pore volumes) of certain metals from the slow-reaction sites. Further investigation on the release of bulk parameters unveiled that, there existed rebounded leaching rates primarily ascribed to the IBA heterogeneity.

Comparison and modeling of leachate transportation dominated by the field permeability with an anisotropic characteristic based on a large-scale field trial study.

Permeability significantly affects leachate transportation. Yet, there often exists a gap for its measurements between laboratory and the field. To predict the fate and transport of heavy metals from IBA leaching, a large-scale field trial study was performed using a big column (d × h = 3 m × 5.5 m) packed with 1-m thickness of IBA (approx. 10.6 tons) overlaid by 4-m sand layer. The determined field permeability (kF) was compared with that achieved from the laboratory, demonstrating a large disparity as much as 4 orders of magnitude likely due to IBA self-compaction. Indeed, back calculation using Blake-Kozeny's equation unveiled that, the "effective" diameters were significantly reduced by 21-46%. kF also demonstrated an anisotropic characteristic associated with fingered flows, trapped bubbles and heterogeneous consolidation/cementation efficiencies. To quantify the effects by kF, we ran a mechanistic model to simulate the transport of 11 heavy metals under advection (dh/dx  = 0.05 m/m), indicating dramatically prolonged breakthrough time from days to centuries. Interestingly, breakthrough time was comparable among various metal ions (0-16.6% of RSD), suggesting their synchronous movements. Metal flux under kF was predicted in the end to address its toxicity potential, demonstrating limited environmental impacts in presence of the USEPA criterion.