Condylar repositioning according to digital bite registration method for virtual orthognathic surgery planning: A series of 49 consecutive patients.

INTRODUCTION: The accurate mandibular condylar positioning for orthognathic surgical planning is fundamental in obtaining a planned occlusal result. The differences between the position of condyles seen on computed tomography or cone-beam computed tomography (CBCT) scans and during surgery reduce the accuracy of the result. This study aimed to assess the differences between the condylar position recorded on CBCT and a numerical 3-dimensional (3D) model created after mandibular repositioning for orthognathic surgery planning. METHODS: This study retrospectively evaluated 49 patients who underwent virtual orthognathic surgery planning. The procedure involved recording a computed tomography or CBCT of the skull and dental surface using an intraoral digital scanner. The mandible was repositioned on the numerical 3D model according to the superimposed virtual bite registration in centric relation. Linear and angular measurements of the right and left condyles were recorded before and after mandibular repositioning. RESULTS: The positions of 98 condyles were compared. Linear measurements of the posterior and superior joint spaces revealed a significant difference. Subgroup analyses displayed statistically significant differences for patients with skeletal Class II malocclusion. CONCLUSION: According to the digital bite registration method, the difference between the mandibular position recorded on CBCT and on the numerical 3D model after repositioning may have clinical significance. Further studies are needed to validate this theory and test the accuracy of the clinical results.

Orthodontic-assisted one step- no prep technique: A straightforward and minimally-invasive approach for localized tooth wear treatment using polymer-infiltrated ceramic network CAD-CAM prostheses.

OBJECTIVES: To introduce a minimally invasive and simple ortho-pros approach for localized tooth wear treatment. CLINICAL CONSIDERATIONS: Four patients with localized anterior and/or posterior tooth wear were treated. Occlusal analyses were performed, and localized wax-up or digital setup were designed based on estimated tissue loss. No-prep anterior and posterior partial-coverage polymer-infiltrated ceramic network (PICN, Vita Enamic) restorations (eg, palatal and occlusal veneers) were computer-aided designed and manufactured (CAD-CAM), tried in, and bonded in supraocclusion, creating a posterior open bite. Then, brief partial (three patients) or global (one patient, for anterior teeth alignment request) orthodontic treatment was performed to extrude the posterior teeth and re-establish posterior occlusal contacts. The orthodontic treatment duration was ~2 months for extrusion. Direct composites were performed to mask the labial finish line of palatal veneers. Clinical results were successful after a follow-up of 15, 21, 23, and 47 months, with 100% success rate of PICN anterior restorations and some minor chippings of borders of thin (0.2 mm) posterior occlusal veneers. Patient-reported outcomes were positive. CONCLUSION: Orthodontic-assisted one step-no prep technique is an advantageous and straightforward evolution of the Dahl concept. PICNs exhibit several advantages in this interdisciplinary approach. CLINICAL SIGNIFICANCE: New hybrid-ceramic CAD-CAM materials and a collaborative interdisciplinary approach support the evolution of the Dahl concept for conservative treatment of worn dentitions. The orthodontic-assisted one step-no prep technique is predictable, efficient, and well tolerated by patients and conserves tooth structure.

Smartphone application-assisted oral hygiene of orthodontic patients: a multicentre randomized controlled trial in adolescents.

OBJECTIVE: The aim of this trial was to test whether the use of a smartphone application (app) connected to a toothbrush improves the oral hygiene compliance of adolescent orthodontic patients. DESIGN: The study was designed as a multicentre, randomized, controlled clinical trial. SETTING: Two academic hospitals. ETHICAL APPROVAL: The study was approved by the ethics committee. SUBJECTS AND METHODS: This multicentre randomized controlled trial was conducted on 38 adolescents aged 12-18 years with full-fixed orthodontic appliances. Participants were randomly assigned either to a test group that used an interactive oscillating/rotating electric toothbrush connected to a brushing aid app or to a control group that used an oscillating/rotating electric toothbrush alone. At baseline, all patients received verbal and written oral hygiene instructions. OUTCOME MEASUREMENTS: Data collection was performed at T1 (baseline), T2 (6 weeks), T3 (12 weeks) and T4 (18 weeks-end of the study). At each time point, the plaque index (PI), gingival index (GI) and white spot lesion (WSL) score were recorded. Several app-related parameters were evaluated. Patient-related outcome measures were investigated in the test group. RESULTS: Test and control groups were similar at baseline except for WSL score. Between T1 and T4, PI and GI decreased significantly in both groups but evolutions were globally similar in both groups. Interestingly, at T3 (12 weeks), the PI was significantly lower in the app group than in the control group (P = 0.014). Data showed a marked decline in the use of the app over time in the test group. CONCLUSIONS: This trial, conducted over 18 weeks in two academic hospitals, showed no significant effect of the use of the app in promoting oral hygiene. TRIAL REGISTRATION: Not registered.

Patient-reported outcomes measures (PROMs) following a piezocision-assisted versus conventional orthodontic treatments: a randomized controlled trial in adults.

OBJECTIVE: To explore patient-related outcomes measures (PROMs) of piezocision-assisted orthodontic treatment compared to a conventional orthodontic treatment using customized appliance. MATERIALS AND METHODS: Twenty-four adult patients requiring orthodontic treatment for mild-to-moderate overcrowding in both jaws were randomly assigned to a test group, treated with a piezocision-assisted orthodontic treatment, or to a control group, where piezocision was not applied. The patient-related outcomes were recorded using a 0-10 visual analog scale (VAS). Daily analgesic consumption and pain level were also recorded following the placement of the orthodontic appliance in both groups and after the piezocision procedure in the test group. Moreover, levels of apprehension and satisfaction were also assessed in both groups. RESULTS: In the piezocision group, over the 7-day period, paracetamol consumption was comparable after the placement of the orthodontic appliance and after the piezocision surgery. Pain levels after the orthodontic and the surgical procedure decreased with time (p < 0.0001) but remained globally higher after piezocision (p = 0.0056). Significantly, more patients of the piezocision group reported that they would undergo the treatment again (p = 0.033) and that they greatly appreciated the duration of treatment (p = 0.0008). However, the level of apprehension was significantly higher in the piezocision group compared to the test group (p = 0.012). CONCLUSIONS: Although, the degree of apprehension before the surgery and higher pain level in the piezocision group, PROMs emphasized similar pain killer consumption in both group and revealed high acceptance and satisfaction with piezocision approach. CLINICAL RELEVANCE: The benefit of piezocision-assisted orthodontic treatment seems to be relevant from a patient perspective. TRIAL REGISTRATION: NCT03406130.

Piezocision-assisted orthodontic treatment using CAD/CAM customized orthodontic appliances: a randomized controlled trial in adults.

OBJECTIVE: The aim of this study was to investigate the effects of piezocision (surgical protocol with sutures) in orthodontic treatment using CAD/CAM (computer-aided design and computer-aided manufacturing) customized orthodontic appliances. DESIGN: The study is designed as a parallel group, randomized controlled trial (RCT). SETTING: University Hospital. ETHICAL APPROVAL: The study was approved by the ethic committee of the University Hospital Liege, Belgium. SUBJECTS AND METHODS: This RCT was conducted on 24 adult patients requiring orthodontic treatment to release mild overcrowding. Patients were all treated with a customized appliance and randomly assigned by means of sealed envelopes containing group codes to either a test group treated with piezocision or a control group without any further treatment. A blinded orthodontist validated appliance removal or further adjustments based on the model study. OUTCOME MEASURES: The overall treatment time and the time between archwire changes were recorded. Moreover, clinical and radiological features such as tooth resorption, gingival recessions, and the presence of scars were evaluated. RESULTS: A total of 24 patients (12 control and 12 test) completed the study. The overall treatment time was significantly shorter in the test group than the control group. Likewise, the time difference between all arch changes was significantly lower when piezocision was performed, except for the first arch at the mandible and the last arches at both maxillae. During the fine-tuning phase, no significant difference was found between the two groups. All periodontal and radiographic parameters remained stable from the start to the end of treatment in both the groups. However, minor scars were found in 66 per cent cases. LIMITATIONS: This trial was a single-centre trial. CONCLUSIONS: Piezocision seems to be an effective method to accelerate orthodontic treatment in cases of mild overcrowding. However, the effect was only observed during the alignment phase and a greater efficiency was found in the maxilla. The technique may be contraindicated in patients with a high smile line since the risk of slight scarring exists. REGISTRATION: ClinicalTrails.gov (Identifier: NCT03406130).

Homemade CAD-CAM surgical guide for palatal mini-screw insertion for maxillary molar distalization providing anchorage. A two times original protocol / Pose de mini-vis palatines par chirurgie guidée à l'aide d'un guide CFAO in-office. Description d'un protocole original en deux temps.

Introduction: Temporary Anchorage Devices have revolutionized our approach to anchorage management. However, their placement may carry risks, such as root perforation, damage to the periodontal ligament, buccal-nasal communication, etc. The aim of this article is to describe an original protocol in two times for the placement of a palatal mini-screw through guided surgery using a guide created by Computer-Aided Design and Manufacturing (CAD/CAM) followed by the transfer of placement information to the laboratory for the fabrication of a Custom Medical Device (CMD) for distalization. Materials and Methods: A two-stage protocol is described and illustrated step by step. Phase 1 comprises 7 steps (including superimposition of maxillary cast and profile teleradiography, surgical tray design), followed by phase 2, which involves 3 final steps (including production of impression for laboratory, production of laboratory model with transfer of mini-screw position). Results: Although the position of the mini screws remains precise, a discrepancy between the planning and the intraoral situation exists. The addition of a second step therefore enables the distalization appliance to be fitted precisely and without pitfalls. Finally, this protocol ensures safe placement, making work easier for the practitioner and, ultimately, for the patient. Conclusion: In a two-stage process, the placement of palatal mini screws through guided surgery using a guide created by CAD/CAM followed by the transfer of this information to the laboratory for the fabrication of a CMD for distalization proves to be a relevant approach.

Introduction: Les dispositifs d'ancrage temporaires ont révolutionné notre vision de la gestion de l'ancrage. En revanche, leur mise en place peut comporter certains risques (perforation radiculaire, communication bucco-nasale, lésions vasculaires…). Cet article vise à décrire un protocole original, en deux temps, de pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par conception et fabrication assistée par ordinateur (CFAO) in-office suivie du transfert des informations de pose au laboratoire pour la confection d'un appareil de distalisation. Matériel et méthodes: Un protocole en deux temps est décrit pas à pas. Le temps 1 comprend sept étapes (dont le placement virtuel des mini-vis et la création de la gouttière chirurgicale), suivi du temps 2 qui implique trois étapes (dont la réalisation de l'empreinte pour le laboratoire et l'élaboration du modèle de laboratoire avec transfert de la position des mini-vis). Résultats: Bien que la pose puisse être considérée comme précise, une différence existe entre la planification et la situation clinique. L'apport d'un second temps améliore l'adaptation de l'appareil de distalisation. Enfin, ce protocole offre une pose sécurisée et apporte ainsi un confort de travail pour le praticien et, in fine, pour le patient. Conclusion: Réalisée en deux temps, la pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par CFAO in-office suivie du transfert de cette information au laboratoire pour la confection d'un appareil de distalisation s'avère être une approche pertinente.

Temporomandibular Disorders and Orthodontics: how to conduct a screening examination? / Dysfonctionnements temporo-mandibulaires et orthodontie : comment conduire un examen de dépistage ?

Introduction: Common Temporomandibular Disorders (TMD) involve the masticatory muscles, temporomandibular joints, and/or their associated structures. Clinical manifestations can vary, including sounds (cracking, crepitus), pain, and/or dyskinesias, often corresponding to a limitation of mandibular movements. Signs or symptoms of muscular or joint disorders of the masticatory system may be present before the initiation of orthodontic treatment, emerge during treatment, or worsen to the point of stopping treatment. How do you screen for common TMD in orthodontic treatment? Materials and Methods: The main elements of the interview and clinical examination for screening common TMD in the context of orthodontic treatment are clarified and illustrated with photographs. Moreover, complementary examinations are also detailed. Results: A clinical screening form for common TMD is proposed. A synthetic decision tree helping in the screening of TMD is also presented. Conclusion: In the context of an orthodontic treatment, the screening examination for common TMD includes gathering information (interview), a clinical evaluation, and possibly complementary investigations. The orthodontist is supported in this approach through the development of a clinical form and a dedicated synthetic decision tree for the screening of TMDs. Systematically screening for common TMD before initiating orthodontic treatment allows the orthodontist to suggest additional diagnostic measures, implement appropriate therapeutic interventions, and/or refer to a specialist in the field if necessary.

Introduction: Les dysfonctionnements temporo-mandibulaires (DTM) concernent les muscles masticateurs, les articulations temporo- mandibulaires et/ou leurs structures associées. Les manifestations cliniques peuvent être diverses : bruits (craquements, crépitements), algies et/ou dyscinésies correspondant le plus souvent à une limitation des mouvements mandibulaires. Or, des signes ou symptômes de troubles musculaires ou articulaires de l'appareil manducateur peuvent être présents avant le début de la prise en charge orthodontique, voire apparaître en cours de traitement ou s'aggraver au point de remettre en question la poursuite du traitement engagé. Comment conduire un dépistage de DTM communs dans le cadre d'une prise en charge orthodontique ? Matériel et méthodes: Les éléments essentiels de l'entretien et de l'examen clinique d'un dépistage des DTM communs dans le cadre d'une consultation d'orthodontie sont clarifiés et illustrés à l'aide de photographies. Le recours aux examens complémentaires a également été détaillé. Résultats: Une fiche clinique de dépistage des DTM communs est proposée. Un arbre décisionnel synthétique aidant au dépistage des DTM est présenté. Conclusion: Dans le cadre d'une consultation d'orthopédie dento-faciale, l'examen de dépistage des DTM communs inclut un recueil d'informations (entretien), une évaluation clinique et éventuellement des examens complémentaires. L'orthodontiste est soutenu dans cette démarche par la création d'une fiche clinique et d'un arbre décisionnel synthétique dédiés au dépistage des DTM. Effectuer systématiquement un dépistage des DTM communs avant d'initier un traitement orthodontique permettra à l'orthodontiste de proposer des moyens diagnostiques supplémentaires si nécessaire, et de mettre en place la prise en charge adéquate et/ou de référer à un spécialiste du domaine pour démarrer le traitement orthodontique dans les meilleures conditions.

The biological effects of Piezocision™ on bone for accelerated tooth movement: A systematic review of animal studies.

OBJECTIVES: This systematic review aimed to assess the biological response at tissue, cellular, and molecular levels following Piezocision™ surgery, and its efficacy in accelerating orthodontic tooth movement. MATERIAL AND METHODS: A systematic review of the literature was conducted across 4 databases following the PRISMA guidelines up to May 2022. Prospective controlled animal studies involving healthy animals under active orthodontic treatment assisted by corticotomy performed with a piezotome (Piezocision™) published in the English language without time restrictions were included. The article selection, data extraction and risk of bias assessment (SYRCLE tool) were performed by two independent blinded review authors. RESULTS: Out of 738 articles screened, 10 studies were included with various level of bias. Biological responses were categorized into tissue, cellular, and molecular levels. Tissue-level changes included a global decrease in bone mineral content post-Piezocision™. At the cellular level, increased bone turnover activity was noted. Molecularly, elevated RANKL and OPG expression, along with increased TRAP+ and cytokines, were observed after Piezocision™. Studies confirmed Piezocision's efficacy, reporting 1.35 to 3.26 times faster tooth movements, peaking between the 3rd and 50th day post-surgery. Biological responses were transient, reversible, and proportional to surgical insult, with reactivation possible through a second Piezocision™. CONCLUSIONS: After Piezocision™ surgery, a transient and reversible biological response was described at the tissue, cellular and molecular levels, which induced faster orthodontic tooth movements. This biological response could be re-activated by an additional Piezocision™ and is proportional to the surgical injury. SYSTEMATIC REVIEW REGISTRATION: Prospero CRD42022303237.

Does the oral microbiota evolve differently during orthodontic treatment with vestibular multi-attachment fixed appliances versus aligners? A systematic review of the literature / Est-ce que le microbiote oral évolue différemment lors d'un traitement orthodontique par appareil fixe multi-attache vestibulaire versus par aligneurs ? Une revue systématique de la littérature.

Introduction: Oral microbiota of patients is impacted during orthodontic treatment. The objective of this systematic review was to observe the evolution of oral microbiota (primary objective) and periodontal health (secondary objective) during orthodontic treatment, and to compare these changes during treatment with vestibular fixed appliances and aligners. Materials and Methods: In accordance with PRISMA guidelines, an electronic search was performed in four databases until January 2022, completed by a manual search, including all prospective controlled studies, randomized or not, on the subject. Two independent authors were involved in the selection of studies, and a third author was consulted in case of disagreement. The Cochrane Collaboration's tool and ROBINS-I tool was used to assess the risk-of-bias in randomized and non-randomized trials, respectively. Finally, the risk of bias graphs were made with the robvis visualization tool. Results: Out of the 994 results obtained from these searches, 11 eligible articles were included (4 randomized clinical trials and 7 non-randomized controlled studies) with varying levels of bias. Results suggested that patients treated with aligner appliances have more favorable microbial flora and less biofilm mass during their treatment compared with those treated with fixed appliances. In addition, inflammatory marker cytokines and periodontal indices were higher in fixed orthodontic treatment compared to aligners treatment. Conclusion: Considering the limitations of this systematic review of the literature, the results suggested that aligners have a more favorable impact on the oral microbiota and periodontium compared to vestibular fixed appliances. PROSPERO registration: CRD42022276486.

Introduction: Il est désormais reconnu que le microbiote oral des patients est impacté au cours du traitement orthodontique. L'objectif de cette revue systématique était d'observer l'évolution du microbiote oral (objectif principal) et de la santé parodontale (objectif secondaire) lors du traitement orthodontique, et de comparer ces modifications lors du traitement par appareils multi-attaches vestibulaires et par aligneurs. Matériels et méthodes: Conformément aux directives PRISMA, une recherche électronique a été réalisée dans quatre bases de données jusqu'à janvier 2022, complétée par une recherche manuelle, incluant toutes les études prospectives contrôlées, randomisées ou non, sur le sujet. Deux auteurs indépendants ont été impliqués dans la sélection des études et un troisième auteur a été sollicité en cas de désaccord. L'outil The Cochrane Collaboration's tool et l'outil ROBINS-I ont été utilisés pour évaluer le risque de biais dans les essais randomisés et non randomisés, respectivement. Finalement, les graphiques des risques de biais ont été réalisés avec l'outil robvis. Résultats: Parmi les 994 résultats issus de ces recherches, onze articles éligibles ont été inclus, comprenant quatre essais cliniques randomisés et sept études contrôlées non randomisées, avec des niveaux de biais variables. Les résultats suggèrent que les patients traités par gouttières orthodontiques présentent une flore microbienne plus favorable, ainsi qu'une masse de biofilm moins élevée au cours du traitement par rapport à ceux traités par appareils fixes multi-attaches. De plus, les cytokines marqueuses d'inflammation et les indices parodontaux étaient plus importants lors des traitements orthodontiques par appareils multi-attaches. Conclusion: Tenant compte des limites associées à cette revue systématique de la littérature, les résultats semblent suggérer que les aligneurs ont un impact plus favorable sur le microbiote oral et sur le parodonte que les appareils fixes multi-attaches. Enregistrement PROSPERO : CRD42022276486.

No-prep dentistry using the Simple Orthodontic Extrusion (SOE) technique to create occlusal space. Illustration in tooth wear and resin-bonded bridges

In restorative dentistry, the lack of occlusal space may lead to the mutilation of healthy tissue in order to provide sufficient space for the restorative material. Noprep dentistry can be achieved by placing high-bite restorations, followed by Simple Orthodontic Extrusion (SOE) of other teeth to close the created open bite. This rapid, partial orthodontic treatment is well accepted by patients as it can be easily performed using simple buttons, and it takes only a few weeks to reestablish occlusal contacts. The SOE technique is a further development of the Dahl concept. It has the advantages without the disadvantages. Two applications of this technique are presented in this article: the treatment of the severe wear of anterior teeth with no-prep palatal veneers made of Polymer-infiltrated Ceramic Network (PICN, 'hybrid ceramic') material and the realization of no-prep zirconia resin-bonded bridges (RBBs) to replace missing lateral incisors. An original 3D-printed resin guide for correctly positioning RBBs and facilitating the removal of excess composite cement is also presented. This work highlights the considerable advantages of multidisciplinary collaboration in the field of minimally invasive dentistry.

What are the prevalence and risk factors associated with wire syndrome in dental students? A cross-sectional study.

INTRODUCTION: Wire syndrome (WS) refers to dental displacements that can be described as aberrant, inaccurate, unexplained, or excessive, on teeth still contained by an intact bonded retainer, without detachment or fracture, leading to evolving dental and periodontal, aesthetic and/or functional consequences. The objective of this study was to define the prevalence rate of mandibular WS and the associated risk factors. METHODS: Participants were dental students who had undergone orthodontic treatment and were wearing an intact fixed mandibular retainer. They completed a 20-item questionnaire, after which an extraoral and intraoral clinical examination was conducted. Participants were assigned to either the non-wire syndrome group or the wire syndrome group by two independent practitioners. Univariate and multivariate logistic regression models were used to investigate potential risk factors. RESULTS: A total of 59 students (23.4years±1.7years) were included. Among these, 9 students presented with mandibular WS, resulting in a prevalence rate of 15.25% (95% CI: 6.08%-24.43%). Univariate analysis revealed a significant association between a deep labio-mental fold, a concave profile, and a multi-strand round wire, and an excess risk of WS. The odds ratios were 16.5 (95% CI: 1.9-146.8, P=0.01), 6.4 (95% CI: 1.0-41.0, P=0.05), and 9.0 (95% CI: 1.7-48.7, P=0.01), respectively. Multivariate analysis confirmed these significant associations, except for the concave profile. CONCLUSIONS: The prevalence rate of wire syndrome was 15.25%. Two risk factors associated with WS were identified: a deep labio-mental fold and a multi-strand round wire retainer.

Impact of Orthodontic-Surgical Treatments on the Signs and Symptoms of Temporomandibular Disorders: A Systematic Review.

INTRODUCTION: Some patients exhibit temporomandibular joint or muscular disorders of the masticatory system before, during, or after orthognathic surgery (OS). These are collectively referred to as temporomandibular disorders (TMDs). This systematic literature review aimed to determine the relationship between orthodontic-surgical treatment and TMDs. METHODS: An electronic search of the PubMed database, supplemented by a manual search, was performed; the search included any studies published between 2021 (date of the last search in a systematic review of the literature on the subject) and June 2023 that evaluate the prevalence of TMDs during orthodontic-surgical treatment. The diagnosis of TMDs had to be established using the diagnostic algorithm "diagnostic criteria for temporomandibular disorders (DC/TMDs)", and the diagnosis of disc displacement had to be confirmed using magnetic resonance imaging (MRI). The data were extracted and statistically analyzed. RESULTS: Of the 100 results, seven eligible articles were included, representing a total of 529 cases undergoing orthodontic-surgical treatment. A reduction in joint noises (64.8%), arthralgia (57 to 77%), and myalgia (73 to 100%) was found after orthodontic-surgical treatment despite the fact that a minority of patients exhibited these signs and symptoms even though they were asymptomatic before treatment. The effects of OS on disc position were objectively unpredictable. After surgery, the presence of headaches decreased without significance and the risk of their occurrence was very low (1%). The studies converged toward a reduction in the amplitudes of mouth opening and lateral/protrusion movements. Finally, after the treatment, mandibular function was improved. CONCLUSION: Under the conditions of this study, OS seems to have a positive impact on the signs and symptoms of TMDs; however, it is not possible to predict the consequential effects on the position of the TMJ disc, whether it is initially in a normal position or displaced.

Prevalence of the Gingival Phenotype in Adults and Associated Risk Factors: A Systematic Review of the Literature.

The relevance of assessing the gingival phenotype prior to the initiation of periodontal, orthodontic, or prosthetic therapy has been clearly demonstrated. However, publications on this subject are either old or concerned with the means of assessing the gingival phenotype or the main factors likely to modify it. The main objective of this systematic review of the literature was therefore to investigate the prevalence of different gingival phenotypes in adults in good general health and with a healthy periodontium. A systematic review of the literature was performed following the guidelines of PRISMA recommendations using an electronic search strategy on four databases (PubMed, Scopus, Cochrane Library, and Embase) complemented by a manual search. Three independent authors were involved in study selection, data extraction, and bias assessment. Results: Of 807 articles, 17 of them, published between 2012 and 2023, involving 3277 subjects from 11 countries and 9766 dental sites, fulfilled the inclusion criteria. The prevalence of the gingival phenotype could not be determined at the level of an individual or a dental arch because all the publications assessed this phenotype only at the level of certain dental sectors, and were not chosen at random. The maxillary central incisors and maxillary or mandibular first molar sectors were associated with a high and thick gingival phenotype, independently of the dental morphology, gender, and age of adult subjects. Furthermore, in these regions, this gingival phenotype tended to be associated with a thick vestibular bone table. In contrast, maxillary and mandibular incisors and premolars more often had a thin gingival phenotype. For other teeth, the results were less conclusive. It is important not to rely solely on the overall appearance of the dentition but to independently assess the thickness and height of the gingiva at each dental site requiring intervention. Finally, this study highlights a key point, namely the need for further longitudinal studies to determine the prevalence in healthy adults. For practicality and feasibility reasons, these studies should be designed according to therapeutic needs, dental sector by dental sector, and within homogeneous source populations. PROSPERO registration: CRD 42023392602.

Malocclusions and oral dysfunctions: A comprehensive epidemiological study on 359 schoolchildren in France.

OBJECTIVES: The purpose was to conduct a comprehensive study of malocclusions and oral dysfunctions on 11-year-old children and to study the risk factors associated with malocclusions. MATERIAL AND METHODS: A cross-sectional descriptive epidemiological survey was conducted among 359 children in France. A clinical examination was conducted, and orthodontic and oral functional data were collected. In addition, the need for orthodontic treatment was evaluated using the criteria defined by of the French National Authority for Health (HAS). Finally, a univariate and multivariate analysis was performed to assess the risks associated with malocclusions. RESULTS: Most children (88%) exhibited a malocclusion, regardless of gender (p = .912). The examination of oral functions identified a large number of swallowing (87%) and respiration (42.7%) disorders. The presence of malocclusion was statistically linked to the low position of the tongue at rest (p < .001), abnormal swallowing (p = .03), and improper mouth breathing (p = .001). After a multivariate analysis, the type of respiration (odds ratio [OR] = 3.2 [1.4-7.3]) and the position of tongue at rest (OR = 3.43 [1.7-7.1]) were the two most prominent factors in the prediction of emerging malocclusion. CONCLUSION: This epidemiological survey reveals a high prevalence of dental malocclusions and functional disorders. Oral respiration and the low position of the tongue at rest are the most important factors in the prediction of a malocclusion.

Importance of Early Detection of Wire Syndrome: A Case Series Illustrating the Main Stages of the Clinical Gradient.

(1) Context and Objective: Wire syndrome (WS) refers to dental displacements which can be qualified as aberrant, unexpected, unexplained, or excessive of teeth still contained by an intact orthodontic retainer wire without detachment or fracture, leading to evolving aesthetic and/or functional consequences, both dental and periodontal. The clinical diagnosis of WS in severe cases is often easy. On the other hand, emerging cases must be detected early to stop this evolutionary process as soon as possible, as well as to effectively manage unwanted dental displacements and associated dento-periodontal tissue repercussions. The aim of this retrospective study was to understand the challenges and importance of early diagnosis, highlight the clinical gradient of WS, and clarify the key elements of diagnosis for many practitioners confronted with this type of problem. (2) Materials and Methods: Three cases of increasing complexity were described: the history of wire syndrome, a description of the key elements of its diagnosis, and the final diagnosis itself. (3) Results: Different types and locations of wire syndrome have been observed, from early form to terminal wire syndrome. The three main stages of the clinical gradient are described as follows. In the first case, wire syndrome starting on tooth 41, called the "X-effect" type, was suspected. X-effect wire syndrome on 21, X-effect wire syndrome on 41, and Twist-effect wire syndrome on 33 were diagnosed in the second case, which can be classified as an intermediate case. In the extreme clinical situation of the last case, severe and terminal wire syndrome on tooth 41, the X-effect type, was observed. (4) Conclusions: This case series presents the main stages of the clinical gradient of WS. Although in the case of early WS it is very difficult to identify and/or differentiate it from movements related to a classical relapse phenomenon, the diagnosis of terminal WS is very easy. The challenge for the practitioner is therefore to detect WS as early as possible to stop the iatrogenic process and propose a personalized treatment depending on the severity of clinical signs. The earlier WS is detected, the less invasive the treatment.

The « patient casting ¼: a key decision in orthognathic surgery / Le « casting du patient ¼: clé de décision en chirurgie orthognathique

Introduction: The surgical orthodontic patient is a patient whose management is specific. The success of this protocol goes beyond of the right indication and the control of the pre-surgical orthodontic preparation of the treatment. The coordination revolves around a multidisciplinary team, namely an orthodontist, a maxillofacial surgeon, a physiotherapist, a speech therapist, a general practitioner, etc. but also with the collaboration of a specialized psychotherapist. Material and Method: Does the ideal « patient ¼ exist in orthognathic surgery? The decision criteria are morphological (occlusal, aesthetic and cephalometric) but also psychosocial. Results: A new classification called « psychological ¼ is proposed in this article. Conclusion: This new classification can be considered as a key decision in the « casting ¼ of the surgical orthodontic patient and represents a first basis for further investigations in this field.

Introduction: Le patient orthodontique chirurgical est un patient dont la prise en charge est spécifique. La réussite de ce protocole va au-delà de la pose de la bonne indication et de la maîtrise de la préparation orthodontique pré-chirurgicale du traitement. La coordination s'articule autour d'une équipe pluridisciplinaire, à savoir un orthodontiste, un chirurgien maxillofacial, un kinésithérapeute, un orthophoniste, un omnipraticien, entre autres, mais également avec la collaboration d'un psychothérapeute spécialisé. Matériel et méthode: Le « patient idéal ¼ existe-t-il en chirurgie orthognathique ? Les critères de décisions sont morphologiques (occlusaux, esthétiques et céphalométriques), mais aussi psycho-sociaux. Résultats: Une nouvelle classification dite « psychologique ¼ est proposée dans cet article. Conclusion: Cette nouvelle classification peut être considérée comme une clé de décision dans le « casting ¼ du patient orthodontique chirurgical et représente une première base pour de plus amples investigations dans ce domaine.

Patient's and Practionner's Experiences of a First Face-to-Face vs. Remote Orthodontic Consultation: A Randomized Controlled Trial.

(1) Aim: The purpose of this study was to assess patients' and practitioners' reported experience measures (PREMs) following a first standard orthodontic consultation (face-to-face consultation) versus a first orthodontic teleconsultation (video-assisted remote orthodontic consultation).; (2) Materials and Methods: This study was designed as a randomized controlled trial in which 60 patients were randomly allocated to two groups. In the control group, patients received a first face-to-face consultation (n = 30) whereas, in the test group, patients received a first orthodontic teleconsultation (n = 30). Patients as well as the orthodontic practitioners completed questionnaires after the experience. (3) Results: From the patients' point of view, overall satisfaction was comparable between the control group and the test group (p = 0.23). Quality of communication with the clinician, understanding of the explanations provided and a sense of privacy were also comparable between the two groups. However, from the practitioners' perspective, overall satisfaction after the face-to-face consultation was significantly higher than after the first remote consultation (p < 0.01). (4) Conclusions: In the context of a first orthodontic consultation, teleorthodontics appears to be an interesting and complementary approach to a classical face-to-face appointment, but which should by no means become systematic.

Biofilm and Orthodontic Materials: literature reviews and Scanning Electron Microscopy (SEM) images gallery / Relations entre biofilm et matériels orthodontiques : revues de la littérature et galerie d'images en microscopie électronique à balayage (MEB)

Introduction: Plaque control remains a concern in oral health but also in orthodontics. Objective: The aim of this paper was to investigate the dental plaque adhesion to different orthodontic appliances. Materials and Methods: Four literature reviews were initiated to clarify the accumulation of dental plaque to different orthodontic appliances, namely the type of brackets (conventional versus self-ligating, metal versus clear), the type of ligatures (metal versus elastomeric) in addition to the type of archwires. Moreover, a gallery of Scanning Electron Microscopy (SEM) images was made on different orthodontic appliances before and/or after time in the oral cavity. Results: Considering the strong methodological heterogeneity of the included studies, there is no consensus on which type of bracket should be preferred for the prevention of plaque retention. Metal ligatures would be less prone to plaque accumulation compared to elastomeric ligatures, which are themselves color-dependent. The type of archwire was not investigated in this topic. SEM images highlighted the presence of anfractuosities on the surface of new orthodontic archwires as well as the presence of biofilm at different degrees of maturation on the appliances after time in the oral cavity. Conclusion: Although it is not possible to establish a consensus on which orthodontic appliances should be preferred to decrease plaque retention, different stages of biofilm evolution are observable on their surface and therefore potentially associated with a proportional virulence.

Introduction: Le contrôle de la plaque dentaire reste une préoccupation en santé bucco-dentaire mais aussi en orthodontie. Objectif: Le but de cet article était d'investiguer l'adhésion de la plaque dentaire sur différents dispositifs orthodontiques. Matériels et méthodes: Quatre revues de la littérature ont été réalisées afin d'étudier l'adhésion de la plaque dentaire sur différents dispositifs orthodontiques, à savoir le type d'attaches (conventionnelles versus autoligaturantes ; métalliques versus céramiques), le type de ligatures (métalliques versus élastomériques) et, enfin, le type d'arcs. Une galerie d'images obtenues par microscopie électronique à balayage (MEB) a également été réalisée sur différents dispositifs orthodontiques avant et/ou après vie en bouche. Résultats: Tenant compte de la forte hétérogénéité méthodologique des études incluses, privilégier un type d'attaches dans la prévention de la rétention de la plaque dentaire ne fait pas l'objet d'un consensus. Les ligatures métalliques seraient moins sujettes à l'accumulation de la plaque dentaire par rapport aux ligatures élastomériques, elle-même dépendantes de leur couleur. Le type d'arcs n'a pas fait l'objet d'investigations sur cette thématique. Les images MEB mettaient en lumière la présence d'anfractuosités à la surface des arcs orthodontiques neufs, ainsi que la présence d'un biofilm à différents degrés de maturation sur les dispositifs après vie en bouche. Conclusion: Bien qu'il ne soit pas possible d'établir un consensus sur les dispositifs orthodontiques à privilégier pour diminuer la rétention de la plaque dentaire, différents stades d'évolution du biofilm sont observables à leur surface et donc potentiellement associés à une virulence proportionnelle.

Cleaning and Disinfection Protocols for Clear Orthodontic Aligners: A Systematic Review.

(1) Background: Clear orthodontic aligners support the development of oral biofilms, which could lead to interferences with the oral microbiota already existing and the deterioration of oral health, with the development of dental caries, periodontal disease and even systemic infections. Therefore, preventive oral health care requires a cleaning and disinfection procedure for aligners. (2) Methods: A systematic review of the literature was conducted across four databases following the PRISMA guidelines up to May 2021, combining an electronic and a manual search. Prospective studies, including randomized controlled trials (RCTs), crossover studies (COSs) and controlled clinical trials (CCTs), published in the English language without time restrictions, evaluating the efficacy of cleaning and disinfection protocols for clear orthodontic aligners by comparing them with a placebo or a negative control, were included. The article selection, data extraction and risk of bias assessment were performed by two independent blinded review authors. In case of disagreement, a third author was solicited throughout the selection process. (3) Results: Among the 221 articles screened in the search process, 4 studies were included in the review, all designed as crossover studies (single arm without randomization with the same sequence of different cleaning and disinfection protocols for each participant). Different cleaning and disinfection methods were studied such as mechanical methods (brushing with toothpaste or vibration), chemical methods/pharmaceutical products (chlorhexidine antibacterial substance, anionic or cationic detergents or effervescent tablets) or combinations of both. (4) Conclusion: Although the determination of the most remarkable method of cleaning and disinfection was impossible because no direct comparison was conducted between all these methods, a multi-step protocol, including the combination of a mechanical and a chemical method, seems to be the most effective approach. Further research is needed to define the most preventive oral health care protocol. Registration: PROSPERO CRD 42021278498.

"Wire Syndrome" Following Bonded Orthodontic Retainers: A Systematic Review of the Literature.

(1) Background and objective: Tooth movements described as unexplained, aberrant, unexpected, unwanted, or undesirable can occur in the presence of an intact orthodontic retention wire, without detachment or fracture. This iatrogenic phenomenon, known little or not by many practitioners, responsible for significant dental and periodontal complications, both functional and aesthetic, is called "Wire Syndrome" (WS). It is therefore considered an undesirable event of bonded orthodontic retainers, which must be differentiated from an orthodontic relapse. The objective was to perform, for the first time, a systematic review of the literature in order to define the prevalence of WS and to study its associated clinical characteristics. (2) Methods: A systematic review of the literature was performed following the guidelines of Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and recommendations using an electronic search strategy on four databases complemented by a manual search. All the prospective and retrospective clinical studies, including case reports and series, written in English or French, clearly mentioning the description, detection, or management of WS were included. Three independent blinding review authors were involved in study selection, data extraction, and bias assessment using the Mixed Methods Appraisal Tool (MMAT). (3) Results: Of 1891 results, 20 articles published between 2007 and 2021 fulfilled the inclusion criteria, with a globally high risk of bias since 16 articles were case report/series. The analysis of each article allowed the highlighting of WS through 13 categories, as follows: prevalence, apparition delay, patient characteristics, arch and tooth involved, families of movements, dental and periodontal consequences, type of wire, risk factors, etiologies, treatment, and preventive approach. (4) Conclusion: This systematic review of the literature elaborated a synthesis on WS, allowing general practitioners, periodontists, and orthodontists to understand this adverse event, to facilitate the diagnostic approach, and to underline preventive measures against WS. This review was registered in the International Prospective Register of Systematic Reviews (PROSPERO; number CRD42021269297).