Engineering an Almost All-Waterborne System for Transparent yet Superhydrophobic Surfaces with High Liquid Impalement Resistance.

Realistically, green manufacturing of transparent superhydrophobic surfaces (SHSs) and high liquid impalement resistance for outdoor engineering are very necessary but pretty challenging. To address this, an almost all-waterborne system composed of synthesized partially open-cage fluorinated polyhedral oligomeric silsesquioxane bearing a pair of -OH (poc-FPOSS-2OH), silica sol, and resin precursor is engineered. The transparent SHSs facilely formed by this system are featured with the exclusive presence of wrapped silica nanoparticle (SiNP) dendritic networks at solid-gas interfaces. The wrapped SiNP dendritic networks have a small aggregation size and low distribution depth, making SHSs highly transparent. The Si-O polymeric wrappers render mechanical flexibility to SiNP dendritic networks and thus enable transparent SHSs to resist high-speed water jet impinging with a Weber number of ≥19 800 in conjunction with the extremely low-surface-energy poc-FPOSS-2OH, which is the highest liquid impalement resistance so far among waterborne SHSs, and can rival the state-of-the-art solventborne SHSs.

Exploring the topic structure and abuse trends of new psychoactive Substance since the 21st century from a bibliometric perspective.

Nowadays, NPS abuse are continuing to expand in terms of harm and scope, due to its cheap and easy to manufacture anywhere in the world. This study reviewed articles related to seven heavily abused NPS to analyze the structure and trends of NPS abuse. A total of 2476 articles were retrieved based on the search strategy for bibliometric analysis. A significant trend of research in recent years was the increasing number of research on synthetic opioids and designer benzodiazepines, but synthetic cannabinoid and synthetic cathinone still dominate, which were mainly concerned with the development of metabolic models and determining methods as well as their abuse characteristics and reasons. However, with the introduction of class-wide ban on synthetic cannabinoid in China and a series of enhancements in other countries, the abuse of it might decrease to some extent, but more than 20 kinds of synthetic cannabinoid beyond the scope of ban in China still reminded researchers of their potential threats. As for synthetic cathinone, an important phenomenon was some of the drugs first identified during certain period might be more widely distributed in the future. Besides, several problems such as the regulation and prevention mode of emerging NPS, development of testing technologies as well as the interpretation and identification of multiple NPS combinations were also worth paying attention to. This study could help entrants better understand the structure of NPS abuse and provided direction for future research in forensic toxicology.

A universal strategy: Rational construction of noble metal nanoparticle-shell/conducting polymer nanofiber-core electrodes with enhanced electrochemical performances.

To address a challenge for decoration of noble metal nanoparticles (NMNPs)-shell on conducting polymer nanofiber (CPNF) electrodes (i.e. NMNP-shell/CPNF-core electrodes) for boosting electrochemical performances, a two-step strategy comprising chemical pre-deposition and electrochemical deposition is designed. The strategy shows a high universality in terms of the diversity of NMNP-shell elements (single-element: AgNP-shell, AuNP-shell, PtNP-shell, PdNP-shell; multi-element: Au/Pt/PdNP-shell) and the independence of conductive substrates of electrodes. The shells are composed of high-density NMNPs and have strong adhesion to CPNF-cores. It is demonstrated that in response to a specific applied electrical stimulus, the resulting low doping level of CPNFs facilitates the generation of high-density nucleation sites (small NMNPs) by chemical pre-deposition (as high capability of electron transfer and low resistance to electron transfer from CP chains to NM ions), which is indispensable for the formation of NMNP-shells on CPNF-cores by electrochemical deposition. The decoration of NMNP-shells can significantly enhance the electrochemical performances of CPNF electrodes. Moreover, the great practicality and reliability of NMNP-shell/CPNF-core electrodes in use as an electrocatalytic platform are confirmed. This universal strategy opens up a new avenue to construct high-dimension shell/core-nanostructured electrodes.

Research on quantitative detection technology of raccoon-derived ingredient adulteration in sausage products.

This project presents a quantitative detection method to identify raccoon-derived ingredient adulteration in sausage products. The specific copy gene of the raccoon was selected as the target gene. According to the specificity of its primer and probe, the quantitative detection method of raccoon microdrops by droplet digital PCR was established. In addition, the accuracy of the proposed method was verified by artificially mixed samples, and the applicability of this method was tested based on the commercially available products. The experimental results indicate that the raccoon mass (M) and raccoon-extracted DNA concentration have a good linear relationship when the sample content is 5-100 mg, and there is also a significant linear relationship between DNA content and DNA copy number (C) with R 2 = .9982. Therefore, using DNA concentration as the median signal, the conversion equation between raw raccoon mass (M) and DNA copy number (C) could be obtained as follows: M = (C + 177.403)/16.954. The detection of artificially mixed samples and commercial samples shows that the method is accurate and suitable for quantitative adulteration detection of various sausage products in the market.

A novel method combining VAT photopolymerization and casting for the fabrication of biodegradable Zn-1Mg scaffolds with triply periodic minimal surface.

Zinc alloy porous scaffolds are expected to be the next generation of degradable orthopedic implants attributed to their suitable degradation rate. However, a few studies have thoroughly investigated its applicable preparation method and functionality as an orthopedic implant. This study fabricated Zn-1Mg porous scaffolds with triply periodic minimal surface (TPMS) structure by a novel method combining VAT photopolymerization and casting. As-built porous scaffolds displayed fully connected pore structures with controllable topology. The manufacturability, mechanical properties, corrosion behaviors, biocompatibility, and antimicrobial performance of the bioscaffolds with pore sizes of 650 µm, 800 µm, and 1040 µm were investigated, and then compared and discussed with each other. In simulations, the mechanical behaviors of porous scaffolds exhibited the same tendency as the experiments. In addition, the mechanical properties of porous scaffolds as a function of degradation time were studied through a 90-day immersion experiment, which can provide a new option for analyzing the mechanical properties of porous scaffolds implanted in vivo. The G06 scaffold with lower pore size presented better mechanical properties before and after degradation compared with G10. The G06 scaffold with the pore size of 650 µm revealed good biocompatibility and antibacterial properties, which makes it possible to be one of the candidates for orthopedic implants.

Strategy toward fluorinated polyhedral oligomeric silsesquioxane wrapping nanoparticles for superomniphobic surfaces.

For engineering implementation of an ultralow-surface-energy hierarchically micro/nanostructured topography for superomniphobic surfaces, a strategy involving the design of a partially open-cage fluorinated polyhedral oligomeric silsesquioxane bearing an -OH pair (poc-F13POSS-2OH) and the subsequent wrapping of nanoparticles with poc-F13POSS-2OH as a result of weak-acid-triggered -OH protonation is developed. The poc-F13POSS-wrapped nanoparticle-based surfaces showed broad-spectrum superomniphobicity. This work has advanced the engineering of state-of-the-art superomniphobic solid surfaces/interfaces.

Prevalence, antimicrobial resistance, and genotype diversity of Salmonella isolates recovered from retail meat in Hebei Province, China.

This study investigated the prevalence of Salmonella in 210 retail meat samples (105 raw chicken and 105 raw pork) collected from supermarkets and wet markets in 13 areas of Hebei Province, China, from June to October 2018. Whole-genome sequencing was performed on all 125 Salmonella isolates to investigate their genetic relationship. Core genome multilocus sequence typing of 77 representative isolates was used to further elucidate the genetic relatedness among the Salmonella isolated from retail meat. The mean detection rate of Salmonella in all samples was 59.5% (125/210). The prevalence of Salmonella was 53.3% (56/105) in chicken and 65.7% (69/105) in pork. Chicken and pork samples collected in July had the highest detection rate of Salmonella among the sampling months. The isolates were assigned to 19 serotypes, with S. Derby, S. London, and S. Thompson being the most frequent serotypes. Resistance to tetracycline (primarily used for the treatment of bacterial infections) was observed in 89.6% of the isolates, and 84.0% were resistant to doxycycline (also a tetracycline antibiotic) or gemifloxacin (commonly used for clinical treatment of human acute bronchitis). More than 80% of the isolates were multidrug resistant. A total of 21 sequence types were identified. Sequence type 40 (ST-40), the predominant genotype among all isolates, was found only in pork; the sequence types of chicken isolates were more diverse. A total of 58 different antibiotic resistance genes (ARGs) were detected in the 125 isolates. Most types of ARGs were associated with aminoglycoside and ß-lactam resistance. Nevertheless, the tetracycline resistance gene tet(A) was the most frequently occurring ARG in all isolates at 78.4%. Multiple isolates of ST-26 contained 20 ARGs. All isolates of ST-40 were divided into two clusters, with at least 160 allelic differences between them. The findings highlight the need to continually monitor ARGs in foodborne Salmonella with particular emphasis on ST-40 and ST-26; the monitoring should include as many retail meat types as possible in the study area.

C21 steroid-enriched fraction refined from Marsdenia tenacissima inhibits hepatocellular carcinoma through the coordination of Hippo-Yap and PTEN-PI3K/AKT signaling pathways.

Marsdenia tenacissimae extraction (MTE), a traditional herbal medicine, has exhibited anti-tumor effects on a variety of cancers. However, its effectiveness and the mechanism of action in Hepatocellular carcinoma (HCC) has not been fully understood. In the present study, we demonstrate that C21 steroid-enriched fraction from MTE, which contains five main C21 steroids (FR5) exhibits obvious pharmacological activities on HCC cells in vitro and in vivo. FR5 induces apoptosis and inhibits proliferation and migration of HepG2 and Bel7402 cells in a dose and time dependent manner. Furthermore, in HCC cells, we found that FR5 inhibits Hippo pathway, leading to inactivation of YAP and increase of PTEN. Enhanced PTEN results in the inhibition of PI3K/AKT signaling pathway, inhibiting cell proliferation by FR5 and FR5-induced apoptosis. Moreover, it was proved that FR5 treatment could inhibit tumor growth in a HCC xenograft mouse model, and immunohistochemistry results showed FR5 treatment resulted in down-regulation of Bcl-2 and YAP, and up-regulation of PTEN and PI3K. Taken together, we found that FR5 effectively inhibits proliferation and induces apoptosis of HCC cells through coordinated inhibition of YAP in the Hippo pathway and AKT in the PI3K-PTEN-mTOR pathway, and suggest FR5 as a potential therapy for HCC.

Marsdeniae tenacissima extract-induced growth inhibition and apoptosis in hepatoma carcinoma cells is mediated through the p53/nuclear factor-κB signaling pathway.

An extract from a traditional Chinese herb, Marsdeniae tenacissima (trade name, Xiao-Ai-Ping) has been approved for use on the Chinese market as a cancer chemotherapeutic agent for decades. Previous studies have demonstrated the cytostatic and pro-apoptotic effects of M. tenacissima extract (MTE) in multiple cancer cells. However, the contributions of MTE to the proliferation and apoptosis of hepatoma carcinoma cells and the underlying mechanisms remain unclear. In the present study, Bel-7402 cells were incubated with increasing concentrations of MTE ranging from 0-320 µl/ml to explore the effects and potential mechanisms of MTE on the proliferation and apoptosis of Bel-7402 cells. 3-(4,5-dimethylthiazol-2-yl)-5(3-carboxymethoxyphenyl)-2-(4-sulfopheny)-2H-tetrazolium, inner salt and propidium iodide (PI)-stained flow cytometry assays demonstrated that MTE significantly suppressed the proliferation of Bel-7402 cells in a dose-dependent manner by arresting the cell cycle at S phase (P<0.05). Annexin V-fluorescein isothiocyanate PI-stained flow cytometry confirmed the significantly pro-apoptotic effect of MTE at both 160 and 240 µl/ml (P<0.001). Reverse transcription-quantitative polymerase chain reaction and western blot analysis demonstrated that MTE (both 160 and 240 µl/ml) induced a significant downregulation of B-cell lymphoma (Bcl)-2 (P<0.01), upregulation of Bcl-2-associated X protein (P<0.01) and activation of caspase-3 (P<0.05). Furthermore, a significant downregulation of murine double minute-2 (MDM2) (P<0.001) and activation of p53 (P<0.001) in Bel-7402 cells following treatment with 160 or 240 µl/ml MTE was observed, accompanied by the inhibition of the nuclear factor (NF)-κB pathway (P<0.001). These results suggested that MTE inhibited growth and exhibited pro-apoptotic effects in Bel-7402 cells, which was mediated by downregulation of the MDM2-induced p53-dependent mitochondrial apoptosis pathway and blocking the NF-κB pathway. Overall, these data serve as preliminary identification of the significant roles of MTE in hepatic carcinoma cells, and suggest that MTE may be a promising candidate for hepatocellular carcinoma therapy.