RESUMO
By adoption of a high permittivity ZrO2capping layer (ZOCL), enhanced ferroelectric properties were achieved in the Hf0.5Zr0.5O2(HZO) thin films. For HZO thin film with 10 Å ZOCL, the 2Prvalue can reach as high as â¼43.1µC cm-2under a sweep electric field of 3 MV cm-1. In addition, a reduced coercive field of 1.5 MV cm-1was observed, which is comparable to that of HZO with metallic CL. Furthermore, the homogeneity of ferroelectric orthorhombic phase in HZO films was observed to be clearly increased, as evidenced by nanoscale piezoelectric force microscopy measurements. These results demonstrate that ZOCL is very favorable for high performance ferroelectric HZO films and their future device applications.
RESUMO
A wealth of fascinating phenomena have been discovered at the BiFeO3 domain walls, examples such as domain wall conductivity, photovoltaic effects, and magnetoelectric coupling. Thus, the ability to precisely control the domain structures and accurately study their switching behaviors is critical to realize the next generation of novel devices based on domain wall functionalities. In this work, the introduction of a dielectric layer leads to the tunability of the depolarization field both in the multilayers and superlattices, which provides a novel approach to control the domain patterns of BiFeO3 films. Moreover, we are able to study the switching behavior of the first time obtained periodic 109° stripe domains with a thick bottom electrode. Besides, the precise controlling of pure 71° and 109° periodic stripe domain walls enable us to make a clear demonstration that the exchange bias in the ferromagnet/BiFeO3 system originates from 109° domain walls. Our findings provide future directions to study the room temperature electric field control of exchange bias and open a new pathway to explore the room temperature multiferroic vortices in the BiFeO3 system.
RESUMO
A strain-driven orthorhombic (O) to rhombohedral (R) phase transition is reported in La-doped BiFeO3 thin films on silicon substrates. Biaxial compressive epitaxial strain is found to stabilize the rhombohedral phase at La concentrations beyond the morphotropic phase boundary (MPB). By tailoring the residual strain with film thickness, we demonstrate a mixed O/R phase structure consisting of O phase domains measuring tens of nanometers wide within a predominant R phase matrix. A combination of piezoresponse force microscopy (PFM), transmission electron microscopy (TEM), polarization-electric field hysteresis loop (P-E loop), and polarization maps reveal that the O-R structural change is an antiferroelectric to ferroelectric (AFE-FE) phase transition. Using scanning transmission electron microscopy (STEM), an atomically sharp O/R MPB is observed. Moreover, X-ray absorption spectra (XAS) and X-ray linear dichroism (XLD) measurements reveal a change in the antiferromagnetic axis orientation from out of plane (R-phase) to in plane (O-phase). These findings provide direct evidence of spin-charge-lattice coupling in La-doped BiFeO3 thin films. Furthermore, this study opens a new pathway to drive the AFE-FE O-R phase transition and provides a route to study the O/R MPB in these films.
RESUMO
Efficient and cost-competitive fabrication of high-quality ferroelectric and multiferroic nanostructures is of general interest. In this work, a top-down nano-patterning technique is developed by the Ar+ ion beam etching in combination with the sacrificed ultrathin anodic alumina (AAO) mask. This technique is demonstrated by preparation of the epitaxial BiFeO3 (BFO) nanostructures of various geometries, including nanodot and anti-nanodot arrays. The lateral dot size is as small as â¼60 nm and an ultrahigh dot density of â¼60 Gbit/inch2 is achieved. It is revealed that the etching process involves sequential shape evolution of both the AAO mask and the underlying BFO film, resulting in the nanodots and anti-nanodots arrays of various geometries. The as-etched BFO nanodots array exhibits well-established ferroelectric domain structures and reversible polarization switching, as examined by piezoresponse force microscopy (PFM). It is suggested that this technique is extendable to fabrication of a wide range of functional oxide nanostructures for potential nanoelectronic applications.
RESUMO
There is growing evidence that domain walls in ferroics can possess emergent properties that are absent in the bulk. For example, 180° ferroelectric domain walls in the ferroelectric-antiferromagnetic BiFeO3 are particularly interesting because they have been predicted to possess a range of intriguing behaviors, including electronic conduction and enhanced magnetization. To date, however, ordered arrays of such domain structures have not been reported. Here, we report the observation of 180° stripe nanodomains in (110)-oriented BiFeO3 thin films grown on orthorhombic GdScO3 (010)O substrates and their impact on exchange coupling to metallic ferromagnets. Nanoscale ferroelectric 180° stripe domains with {112Ì } domain walls were observed in films <32 nm thick. With increasing film thickness, we observed a domain structure crossover from the depolarization field-driven 180° stripe nanodomains to 71° ferroelastic domains determined by the elastic energy. These 180° domain walls (which are typically cylindrical or meandering in nature due to a lack of strong anisotropy associated with the energy of such walls) are found to be highly ordered. Additional studies of Co0.9Fe0.1/BiFeO3 heterostructures reveal exchange bias and exchange enhancement in heterostructures based on BiFeO3 with 180° domain walls and an absence of exchange bias in heterostructures based on BiFeO3 with 71° domain walls; suggesting that the 180° domain walls could be the possible source for pinned uncompensated spins that give rise to exchange bias. This is further confirmed by X-ray circular magnetic dichroism studies, which demonstrate that films with predominantly 180° domain walls have larger magnetization than those with primarily 71° domain walls. Our results could be useful to extract the structure of domain walls and to explore domain wall functionalities in BiFeO3.
RESUMO
Ferroelectrics with negative capacitance effects can amplify the gate voltage in field-effect transistors to achieve low power operation beyond the limits of Boltzmann's Tyranny. The reduction of power consumption depends on the capacitance matching between the ferroelectric layer and gate dielectrics, which can be well controlled by adjusting the negative capacitance effect in ferroelectrics. However, it is a great challenge to experimentally tune the negative capacitance effect. Here, the observation of the tunable negative capacitance effect in ferroelectric KNbO3 through strain engineering is demonstrated. The magnitude of the voltage reduction and negative slope in polarization-electric field (P-E) curves as the symbol of negative capacitance effects can be controlled by imposing various epitaxial strains. The adjustment of the negative curvature region in the polarization-energy landscape under different strain states is responsible for the tunable negative capacitance. Our work paves the way for fabricating low-power devices and further reducing energy consumption in electronics.
RESUMO
The deterministic creation and modification of domain walls in ferroelectric films have attracted broad interest due to their unprecedented potential as the active element in non-volatile memory, logic computation and energy-harvesting technologies. However, the correlation between charged and antiphase states, and their hybridization into a single domain wall still remain elusive. Here we demonstrate the facile fabrication of antiphase boundaries in BiFeO3 thin films using a He-ion implantation process. Cross-sectional electron microscopy, spectroscopy and piezoresponse force measurement reveal the creation of a continuous in-plane charged antiphase boundaries around the implanted depth and a variety of atomic bonding configurations at the antiphase interface, showing the atomically sharp 180° polarization reversal across the boundary. Therefore, this work not only inspires a domain-wall fabrication strategy using He-ion implantation, which is compatible with the wafer-scale patterning, but also provides atomic-scale structural insights for its future utilization in domain-wall nanoelectronics.
RESUMO
SYNOPSIS: : The single function of salt removal limits the further development of the CDI system. A multi-function CDI device is proposed to achieve electrochemical desalination, organics degradation and dichromate ion removal.
RESUMO
FeCo thin films with high saturation magnetization (4 πMs) can be applied in high-frequency electronic devices such as thin film inductors and microwave noise suppressors. However, due to its large magnetocrystalline anisotropy constant and magnetostrictive coefficient of FeCo, the coercivity (Hc) of FeCo films is generally high, which is detrimental to the soft magnetic properties. Meanwhile, the thickness and deposition temperature have significant effects on the coercivity and saturation magnetization of FeCo films. In this paper, FeCo thin films with different thicknesses were prepared by magnetron sputtering at different temperatures. The effects of thickness and deposition temperature on the microstructure and magnetic properties of FeCo thin films were systematically studied. When the film thickness increases from 50 nm to 800 nm, the coercivity would decrease from 309 Oe to 160 Oe. However, the saturation magnetization decreases from 22.1 kG to 15.3 kG. After that, we try to further increase the deposition temperature from room temperature (RT) to 475 °C. It is intriguing to find that the coercivity greatly decreased from 160 Oe to 3 Oe (decreased by 98%), and the saturation magnetization increased from 15.3 kG to 23.5 kG (increased by 53%) for the film with thickness of 800 nm. For the film with thickness of 50 nm, the coercivity also greatly decreased from 309 Oe to 10 Oe (decreased by 96%), but the saturation magnetization did not change significantly. It is contributed to the increase of deposition temperature, which will lead to the increase of grain size and the decrease of the number of grain boundaries. And the coercivity decreases as the number of grain boundaries decreases. Meanwhile, for the thicker films, when increasing the deposition temperature the thermal stress increases, which changes the appearance of (200) texture, and the saturation magnetization increases. Whereas, it has a negligible effect on the orientation of thin films with small thickness (50 nm). This indicates that high-temperature deposition is beneficial to the soft magnetic properties of FeCo thin films, particularly for the films with larger thickness. This FeCo thin film with high saturation magnetization and low coercivity could be an ideal candidate for high-frequency electronic devices.
RESUMO
The discovery and precise manipulation of atomic-size conductive ferroelectric domain walls offers new opportunities for a wide range of prospective electronic devices, and the emerging field of walltronics. Herein, a highly stable and fatigue-resistant nonvolatile memory device is demonstrated, which is based on deterministic creation and erasure of conductive domain walls that are geometrically confined in a topological domain structure. By introducing a pair of delicately designed coaxial electrodes onto the epitaxial BiFeO3 film, a center-type quadrant topological domain with conductive charged domain walls can be easily created. More importantly, reversible switching of the quadrant domain between the convergent state with highly conductive confined walls and the divergent state with insulating confined walls can be realized, resulting in an apparent resistance change with a large on/off ratio of >104 and a technically preferred readout current (up to 40 nA). Owing to restrictions from the clamped quadrant ferroelastic domain, the device exhibits excellent restoration repeatability over 108 cycles and a long retention of over 12 days (>106 s). These results provide a new pathway toward high-performance ferroelectric-domain-wall memory, which may spur extensive interest in exploring the immense potential in the emerging field of walltronics.
RESUMO
BiFeO3-BaTiO3 (BF-BT) dielectric ceramics are receiving more and more concern for advanced energy storage devices owing to their excellent ferroelectric properties and environmental sustainability. However, the energy density and efficiency are limited in spite of the large remanent polarization. Herein, we proposed a multiscale optimization strategy via a local compositional disorder with a Birich content and nanodomain engineering by introducing the Sr0.7Bi0.2Ca0.1TiO3 (SBCT) into BF-BT ceramics. Interestingly, an extraordinary energy storage property (ESP) with a high reversible energy storage density (Wrec) of â¼3.79 J/cm3 and an ultrahigh polarization discrepancy (ΔP) of â¼58.5 µC/cm2 were obtained in the SBCT-modified BF-BT ceramics under 160 kV/cm. The boosted ESP should be attributed to the fact that the replacement of A/B-sites cations could transform the long-range ferroelectric order of the BF-BT system into polar nanoregions (PNRs) along with the refined grain size, decreased leakage current, and broadened energy band gap. Moreover, good frequency (1-103 Hz) and temperature (25-125 °C) stabilities, high fatigue resistance (× 105), large power density (â¼31.1 MW/cm3), and fast discharge time (â¼97 ns) were also observed for the optimized ceramics. These results illustrate a potentially effective method for creating high ESP lead-free ceramics at a low electric field.
RESUMO
Nowadays the development of machine vision is oriented toward real-time applications such as autonomous driving. This demands a hardware solution with low latency, high energy efficiency, and good reliability. Here, we demonstrate a robust and self-powered in-sensor computing paradigm with a ferroelectric photosensor network (FE-PS-NET). The FE-PS-NET, constituted by ferroelectric photosensors (FE-PSs) with tunable photoresponsivities, is capable of simultaneously capturing and processing images. In each FE-PS, self-powered photovoltaic responses, modulated by remanent polarization of an epitaxial ferroelectric Pb(Zr0.2Ti0.8)O3 layer, show not only multiple nonvolatile levels but also sign reversibility, enabling the representation of a signed weight in a single device and hence reducing the hardware overhead for network construction. With multiple FE-PSs wired together, the FE-PS-NET acts on its own as an artificial neural network. In situ multiply-accumulate operation between an input image and a stored photoresponsivity matrix is demonstrated in the FE-PS-NET. Moreover, the FE-PS-NET is faultlessly competent for real-time image processing functionalities, including binary classification between 'X' and 'T' patterns with 100% accuracy and edge detection for an arrow sign with an F-Measure of 1 (under 365 nm ultraviolet light). This study highlights the great potential of ferroelectric photovoltaics as the hardware basis of real-time machine vision.
RESUMO
Perceiving nanoscale ferroelectric phenomena from real space is of great importance for elucidating underlying ferroelectric physics. During the past decades, nanoscale ferroelectric characterization has mainly relied on the Piezoresponse Force Microscopy (PFM) invented in 1992, however, the fundamental limitations of PFM have made the nanoscale ferroelectric studies encounter significant bottlenecks. In this study, a high-resolution non-contact ferroelectric measurement, named Non-Contact Heterodyne Electrostrain Force Microscopy (NC-HEsFM), is introduced. It is demonstrated that NC-HEsFM can operate on multiple eigenmodes to perform ideal high-resolution ferroelectric domain mapping, standard ferroelectric hysteresis loop measurement, and controllable domain manipulation. By using a quartz tuning fork (QTF) sensor, multi-frequency operation, and heterodyne detection schemes, NC-HEsFM achieves a real non-contact yet non-destructive ferroelectric characterization with negligible electrostatic force effect and hence breaks the fundamental limitations of the conventional PFM. It is believed that NC-HEsFM can be extensively used in various ferroelectric or piezoelectric studies with providing substantially improved characterization performance. Meanwhile, the QTF-based force detection makes NC-HEsFM highly compatible for high-vacuum and low-temperature environments, providing ideal conditions for investigating the intrinsic ferroelectric phenomena with the possibility of achieving an atomically resolved ferroelectric characterization.
RESUMO
When scaling the lateral size of a ferroelectric random access memory (FeRAM) device down to the nanometer range, the polarization switching-induced displacement current becomes small and challenging to detect, which greatly limits the storage density of FeRAM. Here, we report the observation of significantly enhanced injection currents, much larger than typical switching currents, induced by polarization switching in BiFeO3 thin films via conductive atomic force microscopy. Interestingly, this injected current can be effectively modulated by applying mechanical force. As the loading force increases from â¼50 to â¼750 nN, the magnitude of the injected current increases and the critical voltage to trigger the current injection decreases. Notably, changing the loading force by an order of magnitude increases the peak current by 2-3 orders of magnitude. The mechanically boosted injected current could be useful for the development of high-density FeRAM devices. The mechanical modulation of the injected current may be attributed to the mechanical force-induced changes in the barrier height and interfacial layer width.
RESUMO
Ferroelectric topological objects provide a fertile ground for exploring emerging physical properties that could potentially be utilized in future nanoelectronic devices. Here, we demonstrate quasi-one-dimensional metallic high conduction channels associated with the topological cores of quadrant vortex domain and center domain (monopole-like) states confined in high quality BiFeO3 nanoislands, abbreviated as the vortex core and the center core. We unveil via the phase-field simulation that the superfine metallic conduction channels along the center cores arise from the screening charge carriers confined at the core region, whereas the high conductance of vortex cores results from a field-induced twisted state. These conducting channels can be reversibly created and deleted by manipulating the two topological states via electric field, leading to an apparent electroresistance effect with an on/off ratio higher than 103. These results open up the possibility of utilizing these functional one-dimensional topological objects in high-density nanoelectronic devices, e.g. nonvolatile memory.
RESUMO
We describe a study leading to the discovery of compound 11, a pan-genotypic hepatitis C virus (HCV) nonstructural protein 5A (NS5A) inhibitor with excellent potency, metabolic stability, and pharmacokinetics (PK). Compound 11 incorporating a 4-silapiperidine group was discovered by further optimizing our previous lead with a triethylsilyl moiety. It displayed great potency against genotype 1 subtype a (GT1a), -1b, -2a, -3a, -4a, -5a, and -6a with an EC50 range of 0.33-17 pM and improved potency against the resistance-associated variant GT1a_M28T. Pharmacokinetics (PK) study indicated that compound 11 has reasonable PK exposures with a high liver distribution in preclinical animal species (mouse, rat, and dog). The results of a 14 day repeat-dose toxicity study identified the safety of compound 11.
Assuntos
Antivirais/química , Descoberta de Drogas/métodos , Farmacorresistência Viral/efeitos dos fármacos , Genótipo , Silício/química , Proteínas não Estruturais Virais/antagonistas & inibidores , Administração Oral , Animais , Antivirais/farmacologia , Cães , Farmacorresistência Viral/fisiologia , Feminino , Humanos , Masculino , Camundongos , Distribuição Aleatória , Ratos , Silício/farmacologia , Proteínas não Estruturais Virais/genética , Proteínas não Estruturais Virais/metabolismoRESUMO
A capping layer is known to be critical for stabilizing the ferroelectric (FE) orthorhombic phase (o-phase) in a HfO2-based thin film. Here, vanadium oxide (VOx), a functional oxide exhibiting the insulator-metal transition, is used as a novel type of a capping layer for the Hf0.5Zr0.5O2 (HZO) thin film. It is demonstrated that the VOx capping layer (VCL) can enhance the FE properties of the HZO thin film comprehensively. Specifically, the HZO thin film with a VCL shows large remanent polarization (2Pr ≈36.9 µC/cm2), relatively small coercive field (Ec ≈1.09 MV/cm), high endurance (up to 109 cycles), and long retention (>105 seconds). The enhanced FE properties may be attributed to the VCL-induced stabilization of the FE o-phase and suppression of oxygen vacancies at the interface. Furthermore, the HZO thin film with a VCL exhibits a successive rightward shift of polarization-voltage (P-V) hysteresis loop as the temperature increases. This is well correlated with the insulator-metal transition in a VCL, which can modulate the interfacial built-in field and thus cause the P-V loop shift. It is therefore demonstrated that a VCL not only enhances the FE properties of HZO thin films but also provides a temperature degree of freedom to modulate the FE properties, which may open up a new pathway to develop HfO2-based FE memories with high performance and novel functionalities.
RESUMO
Complex oxides with tunable structures have many fascinating properties, though high-quality complex oxide epitaxy with precisely controlled composition is still out of reach. Here we have successfully developed solution-based single-crystalline epitaxy for multiferroic (1-x)BiTi(1-y)/2Fe y Mg(1-y)/2O3-(x)CaTiO3 (BTFM-CTO) solid solution in large area, confirming its ferroelectricity at the atomic scale with strong spontaneous polarization. Careful compositional tuning leads to a bulk magnetization of 0.07 ± 0.035 µB/Fe at room temperature, enabling magnetically induced polarization switching exhibiting a large magnetoelectric coefficient of 2.7-3.0 × 10-7 s/m. This work demonstrates the great potential of solution processing in large-scale complex oxide epitaxy and establishes novel room-temperature magnetoelectric coupling in epitaxial BTFM-CTO film, making it possible to explore a much wider space of composition, phase, and structure that can be easily scaled up for industrial applications.
RESUMO
Organic nitrates in the atmosphere are associated with photochemical pollution and are the main components of secondary organic aerosols, which are related to haze. An efficient method for determining organic nitrates in atmospheric fine particles (PM2.5) was established using synthesized standards. Four alkyl (C7-C10) nitrates and three aromatic nitrates (tolyl nitrate, phenethyl nitrate, and p-xylyl nitrate) were synthesized and characterized by 1H and 13C nuclear magnetic resonance spectroscopy. The optimal ions for quantifying and confirming the identities of the analytes were identified by analyzing the standards by gas chromatography tandem mass spectrometry. The tandem mass spectrometer was a triple quadrupole instrument. This method can obtain more accurate information of organic nitrates than on-line methods. Spiked recovery tests were performed using three spike concentrations, and the recoveries were 61.0-111.4 %, and the relative standard deviations were < 8.2% for all of the analytes. Limits of detection and quantification were determined, and the linearity of the method for each analyte was assessed. The applicability of the method was demonstrated by analyzing six PM2.5 samples. Overall, 87% of the analytes were detected in the samples. Phenethyl nitrate, heptyl nitrate, and octyl nitrate were detected in every sample. Phenethyl nitrate was found at a higher mean concentration (3.23 ng/m3) than the other analytes.
RESUMO
Multiferroic nanostructures have been attracting tremendous attention over the past decade, due to their rich cross-coupling effects and prospective electronic applications. In particular, the emergence of some exotic phenomena in size-confined multiferroic systems, including topological domain states such as vortices, center domains, and skyrmion bubble domains, has opened a new avenue to a number of intriguing physical properties and functionalities, and thus underpins a wide range of applications in future nanoelectronic devices. It is also highly appreciated that nano-domain engineering provides a pathway to control the magnetoelectric properties, which is promising for future energy-efficient spintronic devices. In recent years, this field, still in its infancy, has witnessed a rapid development and a number of challenges too. In this article, we shall review the recent advances in the emergent domain-related exotic phenomena in multiferroic nanostructures. Specific attention is paid to the topological domain structures and related novel physical behaviors as well as the electric-field-driven magnetic switching via domain engineering. This review will end with a discussion of future challenges and potential directions.