Nonrelativistic Spin-Momentum Coupling in Antiferromagnetic Twisted Bilayers.

Spin-momentum coupling, which depends strongly on the relativistic effect of heavy elements in solids, is the basis of many phenomena in spintronics. In this Letter, we theoretically predict nonrelativistic spin-momentum coupling in two-dimensional materials. By proposing magnetic symmetry requirements for spin splitting in two-dimensional systems, we find that a simple twisting operation can realize nonrelativistic spin splitting in antiferromagnetic bilayers. Through first-principles calculations, we demonstrate that momentum-dependent spin splitting exists extensively in antiferromagnetic twisted bilayers with different crystal structures and twist angles. The size of the spin splitting caused by twisting is of the same order of magnitude as that arising from spin-orbit coupling. In particular, a transverse spin current with an extremely high charge-spin conversion ratio can be generated in twisted structures under an external electric field. The findings demonstrate the potential for achieving electrically controlled magnetism in materials without spin-orbit coupling.

Fast carrier diffusion via synergistic effects between lithium-ions and polarons in rutile TiO2.

Carrier mobility in titanium dioxide (TiO2) systems is a key factor for their application as energy materials, especially in solar cells and lithium-ion batteries. Studies on the diffusion of Li-ions and polarons in rutile TiO2 systems have attracted extensive attention. However, how their interaction affects the diffusion of Li-ions and electron polarons is largely unclear and related studies are relatively lacking. By using first-principles calculations, we systematically investigate the interaction between the intercalated Li-ions and electron polarons in rutile TiO2 materials. Our analysis shows that the diffusion barrier of the electron polarons decreases around the Li-ion. The interaction between the Li-ions and polarons would benefit their synergistic diffusion both in the pristine and defective rutile TiO2 systems. Our study reveals the synergistic effects between the ions and polarons, which is important for understanding the carrier properties in TiO2 systems and in further improving the performance of energy materials.

Nuclear Quantum Effects on the Charge-Density Wave Transition in NbX2 (X = S, Se).

Understanding the origin of charge-density wave (CDW) instability is important for manipulating novel collective electronic states. Many layered transition metal dichalcogenides (TMDs) share similarity in the structural and electronic instability, giving rise to diverse CDW phases and superconductivity. It is still puzzling that even isostructural and isoelectronic TMDs show distinct CDW features. For instance, bulk NbSe2 exhibits CDW order at low temperature, while bulk NbS2 displays no CDW instability. The CDW transitions in single-layer NbS2 and NbSe2 are also different. In the classic limit, we investigate the electron correlation effects on the dimensionality dependence of the CDW ordering. By performing ab initio path integral molecular dynamics simulations and comparative analyses, we further revealed significant nuclear quantum effects in these systems. Specifically, the quantum motion of sulfur anions significantly reduces the CDW transition temperature in both bulk and single-layer NbS2, resulting in distinct CDW features in the NbS2 and NbSe2 systems.

A first-principles study of exciton self-trapping and electric polarization in one-dimensional organic lead halide perovskites.

Revealing the origin of self-trapped excitons is a prerequisite for further improving the photoluminescence efficiency of low-dimensional organic perovskites. Here, the microscopic formation mechanism of intrinsic self-trapped excitons in one-dimensional (1D) C4N2H14PbX4 (X = Cl, Br and I) systems is investigated, and the polarization-luminescence relationship is established. Our results show that 1D-C4N2H14PbX4 has a low electronic dimension (flat band characteristics), which facilitates the formation of intrinsic self-trapped excitons. The potential well formed by local distortion of the [PbX6] octahedron is the origin of exciton self-trapping. Combined with the electronic density of states and partial charge density, we further confirmed the existence of intrinsic self-trapping excitons in 1D-C4N2H14PbX4. In addition, we found that the breaking of the central inversion symmetry will induce electric polarization, which greatly improves the transition probability of electrons. These results could potentially offer a new direction for improving the luminescence properties of 1D organic lead halide perovskites.

Phase-Selective Synthesis of Ultrathin FeTe Nanoplates by Controllable Fe/Te Atom Ratio in the Growth Atmosphere.

Phase controllable synthesis of 2D materials is of significance for tuning related electrical, optical, and magnetic properties. Herein, the phase-controllable synthesis of tetragonal and hexagonal FeTe nanoplates has been realized by a rational control of the Fe/Te ratio in a chemical vapor deposition system. Using density functional theory calculations, it has been revealed that with the change of the Fe/Te ratio, the formation energy of active clusters changes, causing the phase-controllable synthesis of FeTe nanoplates. The thickness of the obtained FeTe nanoplates can be tuned down to the 2D limit (2.8 nm for tetragonal and 1.4 nm for hexagonal FeTe). X-ray diffraction pattern, transmission electron microscopy, and high resolution scanning transmission electron microscope analyses exhibit the high crystallinity of the as-grown FeTe nanoplates. The two kinds of FeTe nanoflakes show metallic behavior and good electrical conductivity, featuring 8.44 × 104 S m-1 for 9.8 nm-thick tetragonal FeTe and 5.45 × 104 S m-1 for 7.6 nm-thick hexagonal FeTe. The study provides an efficient and convenient route for tailoring the phases of FeTe nanoplates, which benefits to study phase-sensitive properties, and may pave the way for the synthesis of other multiphase 2D nanosheets with controllable phases.

Direct Observation of the Linear Dichroism Transition in Two-Dimensional Palladium Diselenide.

The linear dichroism (LD) transition within anisotropic photonic materials displays promising prospects for applications in polarization-wavelength-selective detectors, optical switching, and optical communication. In conventional two-dimensional (2D) anisotropic materials, the LD is predominantly uniaxial over a broad spectrum of wavelengths and arises principally from the reduced symmetry of the materials. However, the LD transition behavior in crystalline 2D materials remains elusive. Here, we demonstrate the observation of a unique LD conversion phenomenon at a wavelength of 472 nm in palladium diselenide (PdSe2) using polarization-resolved absorption spectroscopy. This material exhibits prominent anisotropic responses and a high absorption ratio of αy/αx ≈ 1.11 at 364 nm, 1.15 at 532 nm, and 0.84 at 633 nm. We propose that this abnormal LD conversion behavior originates from the forceful localization rules at different parallel energy bands that exist within this material. Furthermore, the robust periodicity of Ag and B1g modes in polarization-resolved Raman spectroscopy is in good agreement with the theoretical structure symmetry analysis. This indicates the strong intrinsic LD effect in the anisotropic nature of PdSe2, which offers a macrolevel determination of crystal orientations. Such unique LD conversion features, in combination with strong LD effects, enable the air-stable PdSe2 to be a potential candidate for technological innovations in multispectral imaging, sensing, and polarization-sensitive and wavelength-controllable photoelectronic applications.

Synergy of tellurium and defects in control of activity of phosphorene for oxygen evolution and reduction reactions.

Developing low-cost and metal-free electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is desirable for renewable energy technologies. Recent experiments show that tellurium (Te) atoms can be effectively doped into black phosphorus (BP) nanosheets, and they greatly improve its OER catalytic performance. However, the specific active sites and microscopic configurations in the atomic-scale are still ambiguous. Here, we show that the doped Te atoms prefer to bond with each other to form clusters in phosphorene and they can be further stabilized by various intrinsic defects (Stone-Wales, single vacancy defects and zigzag nanoribbon). Benefiting from the reduced binding strength of O*, Te dopants and intrinsic defects synergistically boost the catalytic activity of phosphorene. The best OER catalytic activity could be realized in the cluster SW2-Te1p (Stone-Wales defect decorated by one Te atom). For ORR, the cluster Pri-Te3p (pristine phosphorene decorated by three Te atoms) exhibits optimal catalytic activity. Calculated ORR/OER potential gaps indicate that the SW2-Te3p cluster most likely acts as the efficient bifunctional catalytic site for both ORR and OER.

Bifunctional mechanism of N, P co-doped graphene for catalyzing oxygen reduction and evolution reactions.

The development of bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is highly desirable for fuel cells and rechargeable metal-air batteries. Till now, it is still challenging to achieve both efficient activities on a single commercial noble-metal catalyst. Recently, N, P co-doped graphene has shown good bifunctional evidence. However, the atomic-scale understanding of the bifunctional mechanism is still lacking. Here, we show that the N and P atoms prefer to bond with each other, forming embedded N-P clusters in graphene. The catalytic performances of the N-P clusters are sensitive to their geometries, especially the N:P ratios. The N:P ratio of ∼2 is optimal for OER, while ∼3 is optimal for ORR. Through evaluating the ORR/OER potential gaps, we found that the N-P cluster designated as NC 2PC 1 shows both the high performances of ORR and OER, responsible for the unique bifunctionality in the N, P co-doped graphene.

A nearly perfect spin filter and a spin logic gate based on a porphyrin/graphene hybrid material.

Although a lot of theoretical studies have designed perfect spin filters using inorganic/organic/organometallic materials, their fabrication methods are not experimentally feasible. This dilemma could be solved by a recent experiment, where porphyrins have been covalently coupled to graphene edges in a precise manner (Y. He et al., Nat. Chem., 2017, 9, 33-38). In particular, experimental results confirmed that the intrinsic features of porphyrins for metallation are preserved after dehydrogenative coupling to graphene edges, paving the way for realizing synthesizable spintronic devices. Inspired by this work, we report new M-porphyrin/graphene (M = Cr, Mn, Fe, and Co) hybrid systems with tunable functionalities on the basis of nonequilibrium Green's functions in combination with density functional theory. The Mn-porphyrin/graphene hybrid system exhibits an extremely high spin polarization coefficient in a parallel magnetic configuration. Our results also confirm that the magnetic configuration plays an important role in realizing a high-performance spin filter. The interesting spin transport properties in the parallel and antiparallel magnetic configurations also make the hybrid system a suitable candidate for realizing the AND logic operation.

The vertical growth of MoS2 layers at the initial stage of CVD from first-principles.

Chemical vapor deposition (CVD) is the highly preferred method for mass production of transition metal dichalcogenide (TMD) layers, yet the atomic-scale knowledge is still lacking about the nucleation and growth. In this study, by using first-principles calculations, we show that, on Au(111) surface, one-dimensional (1D) MoxSy chains are first formed by coalescing of smaller feeding species and are energetically favored at the early stage of nucleation. Two-dimensional (2D) layers can be stabilized only after the number of Mo atoms exceeds ∼12. A vertical growth mode is revealed which accomplishes the structural transformation from the 1D chains to the 2D layers for the clusters while growing. The competition between intralayer and interlayer interactions is the key. These findings serve as new insights for better understanding the atomistic mechanism of the nucleation and growth of TMDs on the surface.

Huge magnetoresistance induced by half-metal-semiconductor phase transition in a one-dimensional spin chain: a first-principles study.

In experimental studies, magnetoresistance (MR) values of 103 are hard to reach for conventional single-molecule spin-valves. Motivated by a recent experiment [Nano Lett., 2016, 16, 577-582], where tailored Co-salophene-based all-spin molecular devices are successfully realized, we demonstrate the functionality of a Co-salophene-based spin chain without magnetic electrodes. By using nonequilibrium Green's functions in combination with density functional theory, we find that the maximum MR ratio of this spin chain can reach 106 by manipulating its spins in a controlled way, which is several orders of magnitude higher than previously reported experimental values. As the Co-salophene-based spin chain has been successfully synthesized, we are highly expectant of the experimental realization of huge MR ratios.

Hydrogen induced contrasting modes of initial nucleations of graphene on transition metal surfaces.

Our first-principles calculations reveal that there exist contrasting modes of initial nucleations of graphene on transition metal surfaces, in which hydrogen plays the role. On Cu(100) and Cu(111) surfaces, an sp2-type network of carbons can be automatically formed with the help of hydrogen under very low carbon coverages. Thus, by tuning the chemical potential of hydrogen, both of the nucleation process and the following growth can be finely controlled. In contrast, on the Ni(111) surface, instead of hydrogen, the carbon coverage is the critical factor for the nucleation and growth. These findings serve as new insights for further improving the poor quality of the grown graphene on transition metal substrates.

Resonant Charge Transport in Conjugated Molecular Wires beyond 10 nm Range.

Using a scanning tunneling microscope, we measured high-bias conductance of single polyporphyrin molecular wires with lengths from 1.3 to 13 nm. We observed several remarkable transport characteristics, including multiple sharp conductance peaks, conductances as high as 20 nS in wires with lengths of >10 nm, and nearly length-independent conductance (attenuation <0.001 Å(-1)). We carried out first-principles simulations on myriad metal-molecule-metal junctions. The simulations revealed that the measured conductance is coherent resonant transport via a delocalized molecular orbital.

Interaction at the silicon/transition metal oxide heterojunction interface and its effect on the photovoltaic performance.

The interfacial reaction and energy level alignment at the Si/transition metal oxide (TMO, including MoO3-x, V2O5-x, WO3-x) heterojunction are systematically investigated. We confirm that the interfacial reaction appears during the thermal deposition of TMO, with the reaction extent increasing from MoO3-x, to V2O5-x, and to WO3-x. The reaction causes the surface oxidation of silicon for faster electron/hole recombination, and the reduction of TMO for effective hole collection. The photovoltaic performance of the Si/TMO heterojunction devices is affected by the interface reaction. MoO3-x are the best hole selecting materials that induce least surface oxidation but strongest reduction. Compared with H-passivation, methyl group passivation is an effective way to reduce the interface reaction and improve the interfacial energy level alignment for better electron and hole collection.

Improved Carrier Separation and Recombination by Ferroelectric Polarization in the CuBiP2Se6/C2N Heterostructure: A Nonadiabatic Molecular Dynamics Study.

The rapid recombination of photogenerated carriers heavily restricts the photocatalytic efficiency. Here, we propose a new strategy to improve catalytic efficiency based on the ferroelectric van der Waals heterostructure (CuBiP2Se6/C2N). Combining density functional theory and the nonadiabatic molecular dynamics (NAMD) method, we have systematically analyzed the ground-state properties and carrier dynamics images in the CuBiP2Se6/C2N heterostructure. Our calculations showed that the ferroelectric polarization of CuBiP2Se6 provides the internal driving force for the photogenerated carriers separation. NAMD results demonstrate that the excited-state carrier transfer and recombination processes in the CuBiP2Se6/C2N are consistent with a type II mechanism. Meanwhile, constructing the ferroelectric heterostructure can effectively prolong the carrier lifetime, from ∼65.98 to ∼124.54 ps. Moreover, the high quantum efficiency and tunable band edge positions mean that the CuBiP2Se6/C2N heterostructure is an excellent potential candidate material for photocatalytic water splitting.

Ferroelectric Polarization and Single-Atom Catalyst Synergistically Promoting CO2 Photoreduction of CuBiP2Se6.

Further improving the activity and selectivity of photocatalytic CO2 reduction remains a challenge. Herein, we propose a new strategy for synergistically promoting photocatalytic CO2 reduction by combining two-dimensional (2D) ferroelectric polarization and single-atom catalysis. Our calculations showed that the ferroelectric polarization of CuBiP2Se6 provides the internal driving force for the separation and migration of photogenerated carriers, which provides a prerequisite for enhancing the photocatalytic efficiency. In addition, the introduction of single Ag atoms can act as an electron reservoir to significantly modify the bonding configurations on the surface through proper static electron transfer, thus effectively promoting the adsorption and activation of CO2 molecules. More importantly, we found that switching the ferroelectric polarization can synergistically optimize the limiting potential as well as control the final products. This study provides a new approach for enhancing the catalytic activity and selectivity of photocatalytic CO2 reduction.

The effect of side substitution and quantum interference on the performance of molecular thermoelectric devices: a brief review.

In recent years, researchers have shown great interest in organic thermoelectric materials that are economical, efficient, lightweight, and environmentally friendly. With advancements in experimental measurement techniques and theoretical calculations, investigations of the thermoelectric properties of molecular devices have become feasible. To regulate the thermoelectric properties of molecular devices, many strategies have been proposed. In this work, we review the theoretical analytical and experimental research methods used to study these properties. We then focus on two tuning strategies, side substitution, and quantum interface effects, which have demonstrated significant improvements in the thermoelectric performance of molecular devices. Finally, we discuss the challenges faced in experimental and theoretical studies and the future prospects of molecular thermoelectric devices.

A Review of Ultrathin Piezoelectric Films.

Due to their high electromechanical coupling and energy density properties, ultrathin piezoelectric films have recently been intensively studied as key materials for the construction of miniaturized energy transducers, and in this paper we summarize the research progress. At the nanoscale, even a few atomic layers, ultrathin piezoelectric films have prominent shape anisotropic polarization, that is, in-plane polarization and out-of-plane polarization. In this review, we first introduce the in-plane and out-of-plane polarization mechanism, and then summarize the main ultrathin piezoelectric films studied at present. Secondly, we take perovskite, transition metal dichalcogenides, and Janus layers as examples to elaborate the existing scientific and engineering problems in the research of polarization, and their possible solutions. Finally, the application prospect of ultrathin piezoelectric films in miniaturized energy converters is summarized.

Nano-phononic metamaterials enable an anomalous enhancement in the interfacial thermal conductance of the GaN/AlN heterojunction.

Improving the interfacial thermal conductance (ITC) is very important for heat dissipation in microelectronic and optoelectronic devices. In this work, taking GaN-AlN contact as an example, we demonstrated a new mechanism to enhance the interfacial thermal conductance using nano-phononic metamaterials. First, how a superlattice affects the ITC is investigated, and it is found that with decreasing superlattice periodic length, the ITC first decreases and then increases, because of the coherent phonon interference effect. However, although constructing a superlattice is effective for tuning the ITC, it cannot enhance the ITC. We suggest that the ITC can be enhanced by 9% through constructing an interfacial nano phononic metamaterial, which is contributed by the additional phonon transport channels for high-frequency phonons with a wide incidence-angle range. These results not only establish a deep understanding of the fundamental physics of the interfacial thermal conductance, but also provide a robust and scalable mechanism, which provides a degree of freedom for efficient thermal management.

High Thermoelectric Performance of a Novel γ-PbSnX2 (X = S, Se, Te) Monolayer: Predicted Using First Principles.

Two-dimensional (2D) group IV metal chalcogenides are potential candidates for thermoelectric (TE) applications due to their unique structural properties. In this paper, we predicted a 2D monolayer group IV metal chalcogenide semiconductor γ-PbSn2 (X = S, Se, Te), and first-principles calculations and Boltzmann transport theory were used to study the thermoelectric performance. We found that γ-PbSnX2 had an ultra-high carrier mobility of up to 4.04 × 103 cm2 V-1 s-1, which produced metal-like electrical conductivity. Moreover, γ-PbSn2 not only has a very high Seebeck coefficient, which leads to a high power factor, but also shows an intrinsically low lattice thermal conductivity of 6-8 W/mK at room temperature. The lower lattice thermal conductivity and high power factors resulted in excellent thermoelectric performance. The ZT values of γ-PbSnS2 and γ-PbSnSe2 were as high as 2.65 and 2.96 at 900 K, respectively. The result suggests that the γ-PbSnX2 monolayer is a better candidates for excellent thermoelectric performance.