Baseline C-reactive protein predicts efficacy of the first-line immune checkpoint inhibitors plus chemotherapy in advanced lung squamous cell carcinoma: a retrospective, multicenter study.

AIMS: To investigate the predictive value of baseline C-reactive protein (CRP) levels on the efficacy of chemotherapy plus immune checkpoint inhibitors (ICI) in patients with advanced lung squamous cell carcinoma (LSCC). MATERIALS AND METHODS: In this retrospective multicenter study spanning from January 2016 to December 2020, advanced LSCC patients initially treated with chemotherapy or a combination of chemotherapy and ICI were categorized into normal and elevated CRP subgroups. The relationship between CRP levels and treatment outcomes was analyzed using multivariate Cox proportional hazards models and multivariate logistic regression, focusing primarily on the progression-free survival (PFS) endpoint, and secondarily on overall survival (OS) and objective response rate (ORR) endpoints. Survival curves were generated using the Kaplan-Meier method, with the log-rank test used for comparison between groups. RESULTS: Of the 245 patients evaluated, the 105 who received a combination of chemotherapy and ICI with elevated baseline CRP levels exhibited a significant reduction in PFS (median 6.5 months vs. 11.8 months, HR, 1.78; 95% CI: 1.12-2.81; p = 0.013) compared to those with normal CRP levels. Elevated CRP was identified as an independent risk factor for poor PFS through multivariate-adjusted analysis. However, among the 140 patients receiving chemotherapy alone, baseline CRP levels did not significantly influence PFS. Furthermore, within the combination therapy group, there was a notable decrease in the ORR (51% vs. 71%, p = 0.035), coupled with a significantly shorter OS (median 20.9 months vs. 31.5 months, HR, 2.24; 95% CI: 1.13-4.44; p = 0.033). CONCLUSION: In patients with advanced LSCC, elevated baseline CRP levels were identified as an independent predictive factor for the efficacy of combination therapy with chemotherapy and ICI, but not in chemotherapy alone. This suggests that CRP may be a valuable biomarker for guiding treatment strategies.

Prognostic and predictive value of a mRNA signature in peripheral T-cell lymphomas: A mRNA expression analysis.

Current international prognostic index is widely questioned on the risk stratification of peripheral T-cell lymphoma and does not accurately predict the outcome for patients. We postulated that multiple mRNAs could combine into a model to improve risk stratification and helping clinicians make treatment decisions. In this study, the gene expression profiles were downloaded from the Gene Expression Omnibus (GEO) database. Weighted gene co-expression network analysis (WGCNA) was used to screening genes in selected module which most closely related to PTCLs, and then built a mRNA signature using a LASSO Cox regression model and validated the prognostic accuracy of it. Finally, a nomogram was constructed and the performance was assessed. A total of 799 WGCNA-selected mRNAs in black module were identified, and a mRNA signature which based on DOCK2, GSTM1, H2AFY, KCNAB2, LAPTM5 and SYK for PTCLs was developed. Significantly statistical difference can be seen in overall survival of PTCLs between low-risk group and high-risk group (training set:hazard ratio [HR] 4.3, 95% CI 2.4-7.4, P < .0001; internal testing set:hazard ratio [HR] 2.4, 95% CI 1.2-4.8, P < .01; external testing set:hazard ratio [HR] 2.3, 95% CI 1.10-4.7, P = .02). Furthermore, multivariate regression demonstrated that the signature was an independently prognostic factor. Moreover, the nomogram which combined the mRNA signature and multiple clinical factors suggesting that predicted survival probability agreed well with the actual survival probability. The signature is a reliable prognostic tool for patients with PTCLs, and it has the potential for clinicians to implement personalized therapeutic regimen for patients with PTCLs.

Enhanced Thermoelectric Performance of Mg-Sn Thin Films: Role of Mg9Sn5 Phase and One-Dimensional Electronic Structure.

Mg-Sn alloy thin films have garnered significant attention for their outstanding thermoelectric (TE) properties and cost-effective elemental composition, making them potential candidates for wearable energy harvesting devices. While previous studies have explored the properties of these thin films, limited research has been conducted to identify physical factors that can further enhance their performance. In this study, we present a novel approach utilizing a convenient electron beam coevaporation technique to fabricate Mg-Sn alloy thin films. Experimental results revealed that controlling the tin content in the Mg-Sn thin films at 38.9% led to the formation of a mixed-phase structure, comprising Mg2Sn and Mg9Sn5. This dual-phase structure exhibited a notable advantage in enhancing the TE performance. The presence of the Mg9Sn5 phase significantly increased the carrier concentration, while maintaining the original Seebeck coefficient and mobility, thereby improving the conductivity of Mg2Sn. Theoretical calculations indicated that the Mg9Sn5 phase displayed 1D-like characteristics, leading to a highly effective valley degeneracy and consequently a high power factor. Overall, this work introduces a promising approach to fabricate high-performance Mg-Sn alloy thin films through electron beam coevaporation, opening up possibilities for their application in wearable energy harvesting devices.

Two-dimensional heterojunction layered graphene oxide/graphitic carbon nitride photocatalyst for removal of toxic environmental dye methylene blue.

The direct thermal polymerization techniques were applied to prepare the graphene oxide (GO)-graphitic carbon nitride (gCN) hybrid structure. The prepared hybrid heterojunction GO-gCN nanosheets were utilized as a photocatalyst to remove model pollutants methylene blue (MB) dye. The basic physio-chemical properties of GO-gCN layered materials have been analyzed by various characterization techniques. In addition, the proposed materials have a higher photocatalytic ability toward the degradation of aqueous solution of MB dye under visible light irradiation within a short treatment time. This is because it's the synergistic effects of GO-gCN layer-by-layer structures produced by π─π stacking with charge-transfer interactions. The gCN with GO composite can able to enhance the charge transfer and light-harvesting properties. Under the influence of photocatalyst, the surface of Graphene oxide undergoes the separation and combination of carbonyl radicals, hydroxyl radicals, epoxy radicals, and electron-hole pairs. This enhances the absorption of visible light and improves the degradation of MB, when GO is incorporated into gCN. The removal efficiency of MB reached up to 82.311% within the short treatment time.

Improving the p-Type CuCrO2 Thin Film's Electrical and Optical Properties.

In this research, we studied the functional properties of CuCrO2, which is the most promising p-type transparent conductive oxide (TCO). The thin films were fabricated using a spin coating technique. The diffraction patterns were obtained with the help of X-ray diffractions, and the optical properties of absorption characteristics were studied using UV-visible absorption. The physical properties of film formation and surface morphology were analyzed using FESEM analysis. The aging properties were also analyzed with the help of various precursors with different aging times. The CuCrO2 thin films' functional properties were determined by using chelating agent and precursor solution aging times. The CuCrO2 thin films have better transmittance, resistance, figure of merit (FOM), and electrical conductivity. Moreover, the resistivity values of the CuCrO2 thin films are 7.01, 9.90, 12.54, 4.10, 2.42, and 0.35 Ω cm. The current research article covers the preparation of copper chromium delafossite thin films. These thin films can be suitable for hole transport layers in transparent optoelectronic devices.

Highly Stable and Enhanced Performance of p-i-n Perovskite Solar Cells via Cuprous Oxide Hole-Transport Layers.

Solar light is a renewable source of energy that can be used and transformed into electricity using clean energy technology. In this study, we used direct current magnetron sputtering (DCMS) to sputter p-type cuprous oxide (Cu2O) films with different oxygen flow rates (fO2) as hole-transport layers (HTLs) for perovskite solar cells (PSCs). The PSC device with the structure of ITO/Cu2O/perovskite/[6,6]-phenyl-C61-butyric acid methyl ester (PC61BM)/bathocuproine (BCP)/Ag showed a power conversion efficiency (PCE) of 7.91%. Subsequently, a high-power impulse magnetron sputtering (HiPIMS) Cu2O film was embedded and promoted the device performance to 10.29%. As HiPIMS has a high ionization rate, it can create higher density films with low surface roughness, which passivates surface/interface defects and reduces the leakage current of PSCs. We further applied the superimposed high-power impulse magnetron sputtering (superimposed HiPIMS) derived Cu2O as the HTL, and we observed PCEs of 15.20% under one sun (AM1.5G, 1000 Wm-2) and 25.09% under indoor illumination (TL-84, 1000 lux). In addition, this PSC device outperformed by demonstrating remarkable long-term stability via retaining 97.6% (dark, Ar) of its performance for over 2000 h.

Microstructures and magnetic anisotropy of single-layered Fe-Pt alloy films by in-situ annealing.

The single-layered Fe-Pt films with thickness of 30 nm are in-situ deposited directly on Si substrate at various substrate temperatures (Ts) of 350 to 590 degrees C. As the Fe-Pt film is sputtered at substrate temperature is 350 degrees C, it shows (111) preferred orientation and tends to in-plane magnetic anisotropy. The L1(0) Fe-Pt film with (001) texture is obtained and exhibited perpendicular magnetic anisotropy as the substrate temperature is increased to 470 degrees C. The perpendicular coercivity (Hc perpendicular), saturation magnetization (Ms) and perpendicular squareness (S perpendicular) of this film are 6.9 kOe, 674 emu/cm3 and 0.89, respectively, which reveal its significant potential as perpendicular magnetic recording media.

Tumor DNA Methylation Profiles Enable Diagnosis, Prognosis Prediction, and Screening for Cervical Cancer.

Background: DNA-methylation-based machine learning algorithms have demonstrated powerful diagnostic capabilities, and these tools are currently emerging in many fields of tumor diagnosis and patient prognosis prediction. This work aimed to identify novel DNA methylation diagnostic biomarkers for differentiating cervical cancer (CC) from normal tissues, as well as a prognostic prediction model to predict survival of CC patients. Methods: The methylation profiles with the available clinical characteristics were downloaded from the Gene Expression Omnibus (GEO) database and The Cancer Genome Atlas (TCGA) program. We first screened out the differential methylation sites in CC and normal tissues and performed multiple statistical analyses to discover DNA methylation diagnostic markers that are used to distinguish CC and normal control. Then, we developed a methylation-based survival model to improve risk stratification. Results: A diagnostic prediction panel consists of five CpG markers that could predict cervical cancer versus normal tissue with highly correct rate of 100%, and cg16428251, cg22341310, and cg23316360 which in diagnostic prediction panel all could yield high sensitivity and specificity for detection of CC and normal in six cohorts (area under curve [AUC] > 0.8), in addition to excellent performance in discriminating between CC and normal sample. The diagnostic marker panel also effectively predicted the CIN3 versus normal tissue with high accuracy in two datasets (AUC = 0.80, 0.789, respectively). Furthermore, a prognostic prediction model aggregated two CpG markers that effectively stratified the prognosis of high-risk and low-risk groups (training cohort: hazard ratio [HR] 4, 95% CI: 1.7-9.6, P = 0.0021; testing cohort: hazard ratio [HR] 1.9, 95% CI: 1.2-3.1, P = 0.0072). Conclusion: The findings of our study showed that DNA methylation markers are of great value in the diagnosis and prognosis of CC.

Enhanced Electrical Properties of Copper Nitride Films Deposited via High Power Impulse Magnetron Sputtering.

High Power Impulse Magnetron Sputtering (HiPIMS) has generated a great deal of interest by offering significant advantages such as high target ionization rate, high plasma density, and the smooth surface of the sputtered films. This study discusses the deposition of copper nitride thin films via HiPIMS at different deposition pressures and then examines the impact of the deposition pressure on the structural and electrical properties of Cu3N films. At low deposition pressure, Cu-rich Cu3N films were obtained, which results in the n-type semiconductor behavior of the films. When the deposition pressure is increased to above 15 mtorr, Cu3N phase forms, leading to a change in the conductivity type of the film from n-type to p-type. According to our analysis, the Cu3N film deposited at 15 mtorr shows p-type conduction with the lowest resistivity of 0.024 Ω·cm and the highest carrier concentration of 1.43 × 1020 cm-3. Furthermore, compared to the properties of Cu3N films deposited via conventional direct current magnetron sputtering (DCMS), the films deposited via HiPIMS show better conductivity due to the higher ionization rate of HiPIMS. These results enhance the potential of Cu3N films' use in smart futuristic devices such as photodetection, photovoltaic absorbers, lithium-ion batteries, etc.

In-Sn-Zn Oxide Nanocomposite Films with Enhanced Electrical Properties Deposited by High-Power Impulse Magnetron Sputtering.

In-Sn-Zn oxide (ITZO) nanocomposite films have been investigated extensively as a potential material in thin-film transistors due to their good electrical properties. In this work, ITZO thin films were deposited on glass substrates by high-power impulse magnetron sputtering (HiPIMS) at room temperature. The influence of the duty cycle (pulse off-time) on the microstructures and electrical performance of the films was investigated. The results showed that ITZO thin films prepared by HiPIMS were dense and smooth compared to thin films prepared by direct-current magnetron sputtering (DCMS). With the pulse off-time increasing from 0 µs (DCMS) to 2000 µs, the films' crystallinity enhanced. When the pulse off-time was longer than 1000 µs, In2O3 structure could be detected in the films. The films' electrical resistivity reduced as the pulse off-time extended. Most notably, the optimal resistivity of as low as 4.07 × 10-3 Ω·cm could be achieved when the pulse off-time was 2000 µs. Its corresponding carrier mobility and carrier concentration were 12.88 cm2V-1s-1 and 1.25 × 1020 cm-3, respectively.

The Optoelectronic Properties of p-Type Cr-Deficient Cu[Cr0.95-xMg0.05]O2 Films Deposited by Reactive Magnetron Sputtering.

CuCrO2 is one of the most promising p-type transparent conductive oxide (TCO) materials. Its electrical properties can be considerably improved by Mg doping. In this work, Cr-deficient CuCrO2 thin films were deposited by reactive magnetron sputtering based on 5 at.% Mg doping. The influence of Cr deficiency on the film's optoelectronic properties was investigated. As the film's composition varied, CuO impurity phases appeared in the film. The mixed valency of Cu+/Cu2+ led to an enhancement of the hybridization between the Cu3d and O2p orbitals, which further reduced the localization of the holes by oxygen. As a result, the carrier concentration significantly improved. However, since the impurity phase of CuO introduced more grain boundaries in Cu[Cr0.95-xMg0.05]O2, impeding the transport of the carrier and incident light in the film, the carrier mobility and the film's transmittance reduced accordingly. In this work, the optimal optoelectronic performance is realized where the film's composition is Cu[Cr0.78Mg0.05]O2. Its Haacke's figure of merit is about 1.23 × 10-7 Ω-1.

Absorption Amelioration of Amorphous Si Film by Introducing Metal Silicide Nanoparticles.

Amorphous Si (a-Si) films with metal silicide are expected to enhance the absorption ability of pure a-Si films. In this present study, NiSi (20 nm)/Si (40 nm) and AlSi (20 nm)/Si (40 nm) bilayer thin films are deposited through radio frequency (RF) sputtering at room temperature. The influence of the film's composition and the annealing temperature on the film's optical absorption is investigated. The results show that all the NiSi/Si films and AlSi/Si films possess higher absorption ability compared to a pure a-Si film (60 nm). After annealing from 400 to 600 °C under vacuum for 1 h, the Si layer remains amorphous in both NiSi/Si films and AlSi/Si films, while the NiSi layer crystallizes into NiSi2 phase, whereas Al atoms diffuse through the whole film during the annealing process. Consequently, with increasing the annealing temperature, the optical absorption of NiSi/Si films increases, while that of AlSi/Si films obviously degrades.

Optoelectronic Properties and the Electrical Stability of Ga-Doped ZnO Thin Films Prepared via Radio Frequency Sputtering.

In this work, Ga-doped ZnO (GZO) thin films were deposited via radio frequency sputtering at room temperature. The influence of the Ga content on the film's optoelectronic properties as well as the film's electrical stability were investigated. The results showed that the film's crystallinity degraded with increasing Ga content. The film's conductivity was first enhanced due to the replacement of Zn2+ by Ga3+ before decreasing due to the separation of neutralized gallium atoms from the ZnO lattice. When the Ga content increased to 15.52 at %, the film's conductivity improved again. Furthermore, all films presented an average transmittance exceeding 80% in the visible region. Regarding the film's electrical stability, GZO thermally treated below 200 °C exhibited no significant deterioration in electrical properties, but such treatment over 200 °C greatly reduced the film's conductivity. In normal atmospheric conditions, the conductivity of GZO films remained very stable at ambient temperature for more than 240 days.