Photocatalytic Reduction of CO2 to HCOOH and CO by a Phosphine-Bipyridine-Phosphine Ir(III) Catalyst: Photophysics, Nonadiabatic Effects, Mechanism, and Selectivity.

Photocatalytic CO2 reduction is one of the best solutions to solve the global energy crisis and to realize carbon neutralization. The tetradentate phosphine-bipyridine (bpy)-phosphine (PNNP)-type Ir(III) photocatalyst, Mes-IrPCY2, was reported with a high HCOOH selectivity but the photocatalytic mechanism remains elusive. Herein, we employ electronic structure methods in combination with radiative, nonradiative, and electron transfer rate calculations, to explore the entire photocatalytic cycle to either HCOOH or CO, based on which a new mechanistic scenario is proposed. The catalytic reduction reaction starts from the generation of the precursor metal-to-ligand charge transfer (3 MLCT) state. Subsequently, the divergence happens from the 3 MLCT state, the single electron transfer (SET) and deprotonation process lead to the formation of one-electron-reduced species and Ir(I) species, which initiate the reduction reaction to HCOOH and CO, respectively. Interestingly, the efficient occurrence of proton or electron transfer reduces barriers of critical steps. In addition, nonadiabatic transitions play a nonnegligible role in the cycle. We suggest a lower free-energy barrier in the reaction-limiting step and the very efficient SET in 3 MLCT are cooperatively responsible for a high HCOOH selectivity. The gained mechanistic insights could help chemists to understand, regulate, and design photocatalytic CO2 reduction reaction of similar function-integrated molecular photocatalyst.

Chalcogen Bond Catalysis with Telluronium Cations for Bromination Reaction: Importance of Electrostatic and Polarization Effects.

Recently, chalcogen bond catalysts with telluronium cations have garnered considerable attention in organic reactions. In this work, chalcogen bond catalysis on the bromination reaction of anisole with N-bromosuccinimide (NBS) with the telluronium cationic catalysts has been explored with density functional theory (DFT). The catalytic reaction is divided into two stages: the bromine transfer step and the proton transfer step. Based on the computational results, one can find the rate-determining step is the bromine transfer step. Moreover, the present study elucidates that a stronger chalcogen bond between catalysts and NBS will give better catalytic performance. Additionally, this work also clarified the importance of the electrostatic and polarization effects in the chalcogen bond between the oxygen atom of NBS and the Te atom of the catalyst in this bromination reaction. The electrostatic and polarization effects are significantly influenced by the electron-withdrawing ability of the substitution groups on the catalysts. Moreover, the structure-property relationship between the strength of chalcogen bond, electrostatic effect, polarization effect and catalytic performance are established for the design of more efficient chalcogen bond catalysts.

Thermally activated delayed fluorescence of a Ir(III) complex: absorption and emission properties, nonradiative rates, and mechanism.

One recent experimental study reported a Ir(III) complex with thermally activated delayed fluorescence (TADF) phenomenon in solution, but its luminescent mechanism is elusive. In this work, we combined density functional theory (DFT), time-dependent DFT (TDDFT) and multi-state complete active space second-order perturbation theory (MS-CASPT2) methods to investigate excited-state properties, photophysics, and emission mechanism of this Ir(III) complex. Two main absorption bands observed in experiments can be attributed to the electronic transition from the S0 state to the S1 and S2 states; while, the fluorescence and phosphorescence are generated from the S1 and T1 states, respectively. Both the S1 and T1 states have clear metal-to-ligand charge transfer (MLCT) character. The present computational results reveal a three-state model including the S0, S1 and T1 states to rationalize the TADF behavior. The small energy gap between the S1 and T1 states benefits the forward and reverse intersystem crossing (ISC and rISC) processes. At 300 K, the rISC rate is five orders of magnitude larger than the phosphorescence rate therefore enabling TADF. At 77 K, the rISC rate is sharply decreased but remains close to the phosphorescence rate; therefore, in addition to the phosphorescence, the delayed fluorescence could also contribute to the experimental emission. The estimated TADF lifetime agrees well with experiments, 9.80 vs. 6.67 µs, which further verifies this three-state model.

Theoretical studies on thermally activated delayed fluorescence of "carbene-metal-amide" Cu and Au complexes: geometric structures, excitation characters, and mechanisms.

"Carbene-metal(I)-amide" (CMA) complexes have garnered significant attention due to their remarkable properties and potential TADF applications in organic electronics. However, the atomistic working mechanism is still elusive. Herein, we chose two CMA complexes, i.e., cyclic (alkyl)(amino) carbene-copper[gold](I)-carbazole (CAAC-Cu[Au]-Cz), and employed both DFT and TD-DFT methods, in combination with radiative and nonradiative rate calculations, to investigate geometric and electronic structures of these two complexes in the ground and excited states, including orbital compositions, electronic transitions, absorption and emission spectra, and the luminescence mechanism. It is found that the coplanar or perpendicular conformations are coexistent in the ground state (S0), the lowest excited singlet state (S1), and the triplet state (T1). Both the coplanar and perpendicular S1 and T1 states have similar ligand-to-ligand charge transfer (LLCT) character between CAAC and Cz, and some charge-transfer character between metal atoms and ligands, which is beneficial to minimize the singlet-triplet energy gaps (ΔEST) and increase the spin-orbit coupling (SOC). An interesting three-state (S0, S1, T1) model involving two regions (coplanar and perpendicular) is proposed to rationalize the experimental TADF phenomena in the CMA complexes. In addition to the coplanar ones, the perpendicular S1 and T1 states also play a role in promoting the repopulation of the coplanar S1 exciton, which is a primary source for the delayed fluorescence.

Extending multi-layer energy-based fragment method for excited-state calculations of large covalently bonded fragment systems.

Recently, we developed a low-scaling Multi-Layer Energy-Based Fragment (MLEBF) method for accurate excited-state calculations and nonadiabatic dynamics simulations of nonbonded fragment systems. In this work, we extend the MLEBF method to treat covalently bonded fragment ones. The main idea is cutting a target system into many fragments according to chemical properties. Fragments with dangling bonds are first saturated by chemical groups; then, saturated fragments, together with the original fragments without dangling bonds, are grouped into different layers. The accurate total energy expression is formulated with the many-body energy expansion theory, in combination with the inclusion-exclusion principle that is used to delete the contribution of chemical groups introduced to saturate dangling bonds. Specifically, in a two-layer MLEBF model, the photochemically active and inert layers are calculated with high-level and efficient electronic structure methods, respectively. Intralayer and interlayer energies can be truncated at the two- or three-body interaction level. Subsequently, through several systems, including neutral and charged covalently bonded fragment systems, we demonstrate that MLEBF can provide accurate ground- and excited-state energies and gradients. Finally, we realize the structure, conical intersection, and path optimizations by combining our MLEBF program with commercial and free packages, e.g., ASE and SciPy. These developments make MLEBF a practical and reliable tool for studying complex photochemical and photophysical processes of large nonbonded and bonded fragment systems.

Nonadiabatic Derivative Couplings Calculated Using Information of Potential Energy Surfaces without Wavefunctions: Ab Initio and Machine Learning Implementations.

In this work, we implemented an approximate algorithm for calculating nonadiabatic coupling matrix elements (NACMEs) of a polyatomic system with ab initio methods and machine learning (ML) models. Utilizing this algorithm, one can calculate NACMEs using only the information of potential energy surfaces (PESs), i.e., energies, and gradients as well as Hessian matrix elements. We used a realistic system, namely CH2NH, to compare NACMEs calculated by this approximate PES-based algorithm and the accurate wavefunction-based algorithm. Our results show that this approximate PES-based algorithm can give very accurate results comparable to the wavefunction-based algorithm except at energetically degenerate points, i.e., conical intersections. We also tested a machine learning (ML)-trained model with this approximate PES-based algorithm, which also supplied similarly accurate NACMEs but more efficiently. The advantage of this PES-based algorithm is its significant potential to combine with electronic structure methods that do not implement wavefunction-based algorithms, low-scaling energy-based fragment methods, etc., and in particular efficient ML models, to compute NACMEs. The present work could encourage further research on nonadiabatic processes of large systems simulated by ab initio nonadiabatic dynamics simulation methods in which NACMEs are always required.

Thermally Activated Delayed Fluorescence of a Dinuclear Platinum(II) Compound: Mechanism and Roles of an Upper Triplet State.

A dinuclear Pt(II) compound was reported to exhibit thermally activated delayed fluorescence (TADF); however, the luminescence mechanism remains elusive. To reveal relevant excited-state properties and luminescence mechanism of this Pt(II) compound, both density function theory (DFT) and time-dependent DFT (TD-DFT) calculations were carried out in this work. In terms of the results, the S1 and T2 states show mixed intraligand charge transfer (ILCT)/metal-to-ligand CT (MLCT) characters while the T1 state exhibits mixed ILCT/ligand-to-metal CT (LMCT) characters. Mechanistically, a four-state (S0 , S1 , T1 , and T2 ) model is proposed to rationalize the TADF behavior. The reverse intersystem crossing (rISC) process from the initial T1 to final S1 states involves two up-conversion channels (direct T1 →S1 and T2 -mediated T1 →T2 →S1 pathways) and both play crucial roles in TADF. At 300 K, these two channels are much faster than the T1 phosphorescence emission enabling TADF. However, at 80 K, these rISC rates are reduced by several orders of magnitude and become very small, which blocks the TADF emission; instead, only the phosphorescence is observed. These findings rationalize the experimental observation and could provide useful guidance to rational design of organometallic materials with superior TADF performances.

Thermally Activated Delayed Fluorescence Mechanism of a Bicyclic "Carbene-Metal-Amide" Copper Compound: DFT/MRCI Studies and Roles of Excited-State Structure Relaxation.

Herein we investigated the luminescence mechanism of one "carbene-metal-amide" copper compound with thermally activated delayed fluorescence (TADF) using density functional theory (DFT)/multireference configuration interaction, DFT, and time-dependent DFT methods with the polarizable continuum model. The experimentally observed low-energy absorption and emission peaks are assigned to the S1 state, which exhibits clear interligand and partial ligand-to-metal charge-transfer character. Moreover, it was found that a three-state (S0, S1, and T1) model is sufficient to describe the TADF mechanism, and the T2 state should play a negligible role. The calculated S1-T1 energy gap of 0.10 eV and proper spin-orbit couplings facilitate the reverse intersystem crossing (rISC) from T1 to S1. At 298 K, the rISC rate of T1 → S1 (∼106 s-1) is more than 3 orders of magnitude larger than the T1 phosphorescence rate (∼103 s-1), thereby enabling TADF. However, it disappears at 77 K because of a very slow rISC rate (∼101 s-1). The calculated TADF rate, lifetime, and quantum yield agree very well with the experimental data. Methodologically, the present work shows that only considering excited-state information at the Franck-Condon point is insufficient for certain emitting systems and including excited-state structure relaxation is important.

Generalized Ab Initio Nonadiabatic Dynamics Simulation Methods from Molecular to Extended Systems.

Nonadiabatic dynamics simulation has become a powerful tool to describe nonadiabatic effects involved in photophysical processes and photochemical reactions. In the past decade, our group has developed generalized trajectory-based ab initio surface-hopping (GTSH) dynamics simulation methods, which can be used to describe a series of nonadiabatic processes, such as internal conversion, intersystem crossing, excitation energy transfer and charge transfer of molecular systems, and photoinduced nonadiabatic carrier dynamics of extended systems with and without spin-orbit couplings. In this contribution, we will first give a brief introduction to our recently developed methods and related numerical implementations at different computational levels. Later, we will present some of our latest applications in realistic systems, which cover organic molecules, biological proteins, organometallic compounds, periodic organic and inorganic materials, etc. Final discussion is given to challenges and outlooks of ab initio nonadiabatic dynamics simulations.

Effects of doping high-valence transition metal (V, Nb and Zr) ions on the structure and electrochemical performance of LIB cathode material LiNi0.8Co0.1Mn0.1O2.

Ni-rich layered oxides, like LiNi0.8Co0.1Mn0.1O2 (NCM811), have been widely investigated as cathodes due to their high energy density. However, gradual structural transformation during cycling can lead to capacity degradation and potential decay of cathode materials. Herein, we doped high-valence transition metal (TM) ions (V5+, Nb5+, and Zr4+) at the Ni site of NCM811 by first principles simulations and explored the mechanism of doping TMs in NCMs for enhancing the electrochemical performance. Analysis of the calculations shows that doping V, Nb and Zr has an efficient influence on alleviating the Ni oxidation, reducing the loss of oxygen, and facilitating Li+ migration. Moreover, V doping can further suppress the lattice distortion due to the radius of V5+ being close to the radius of Mn4+. In particular, compared with the barrier of the pristine NCM in Li divacancy, the barrier of V-doped NCM reaches the lowest. In conclusion, V is the most favorable dopant for NCM811 to improve the electrochemical properties and achieve both high capacity and cycling stability.

Blue-AsP monolayer as a promising anode material for lithium- and sodium-ion batteries: a DFT study.

Based on first-principle calculations, we proposed a one two-dimensional (2D) blue AsP (b-AsP) monolayer as an ideal anode material for lithium/sodium-ion (Li/Na-ion) batteries for the first time. The b-AsP monolayer possesses thermal and dynamic stabilities. The system undergoes the transition from semiconductor to metal after Li/Na atoms are embedded, which ensures good electric transportation. Most remarkably, our results indicate that the b-AsP monolayer exhibits high theoretical capacities of 1011.2 mA h g-1 (for Li) and 1769.6 mA h g-1 (for Na), low average open circuit voltages of 0.17 eV for Li4AsP and 0.14 eV for Na7AsP systems and ultrafast diffusivity with the low energy barriers of 0.17/0.15 eV and 0.08/0.07 eV of the P/As sides for Li and Na, respectively. Given these exceptional properties, the synthesis of a buckled b-AsP monolayer is desired to achieve a promising electrode material for Li- and Na-ion batteries.

BODIPY-Based Photodynamic Agents for Exclusively Generating Superoxide Radical over Singlet Oxygen.

Developing Type-I photosensitizers is considered as an efficient approach to overcome the deficiency of traditional photodynamic therapy (PDT) for hypoxic tumors. However, it remains a challenge to design photosensitizers for generating reactive oxygen species by the Type-I process. Herein, we report a series of α,ß-linked BODIPY dimers and a trimer that exclusively generate superoxide radical (O2-. ) by the Type-I process upon light irradiation. The triplet formation originates from an effective excited-state relaxation from the initially populated singlet (S1 ) to triplet (T1 ) states via an intermediate triplet (T2 ) state. The low reduction potential and ultralong lifetime of the T1 state facilitate the efficient generation of O2-. by inter-molecular charge transfer to molecular oxygen. The energy gap of T1 -S0 is smaller than that between 3 O2 and 1 O2 thereby precluding the generation of singlet oxygen by the Type-II process. The trimer exhibits superior PDT performance under the hypoxic environment.

Inhibition of leucine-rich repeats and calponin homology domain containing 1 accelerates microglia-mediated neuroinflammation in a rat traumatic spinal cord injury model.

BACKGROUND: Spinal cord injury (SCI) triggers the primary mechanical injury and secondary inflammation-mediated injury. Neuroinflammation-mediated insult causes secondary and extensive neurological damage after SCI. Microglia play a pivotal role in the initiation and progression of post-SCI neuroinflammation. METHODS: To elucidate the significance of LRCH1 to microglial functions, we applied lentivirus-induced LRCH1 knockdown in primary microglia culture and tested the role of LRCH1 in microglia-mediated inflammatory reaction both in vitro and in a rat SCI model. RESULTS: We found that LRCH1 was downregulated in microglia after traumatic SCI. LRCH1 knockdown increased the production of pro-inflammatory cytokines such as IL-1ß, TNF-α, and IL-6 after in vitro priming with lipopolysaccharide and adenosine triphosphate. Furthermore, LRCH1 knockdown promoted the priming-induced microglial polarization towards the pro-inflammatory inducible nitric oxide synthase (iNOS)-expressing microglia. LRCH1 knockdown also enhanced microglia-mediated N27 neuron death after priming. Further analysis revealed that LRCH1 knockdown increased priming-induced activation of p38 mitogen-activated protein kinase (MAPK) and Erk1/2 signaling, which are crucial to the inflammatory response of microglia. When LRCH1-knockdown microglia were adoptively injected into rat spinal cords, they enhanced post-SCI production of pro-inflammatory cytokines, increased SCI-induced recruitment of leukocytes, aggravated SCI-induced tissue damage and neuronal death, and worsened the locomotor function. CONCLUSION: Our study reveals for the first time that LRCH1 serves as a negative regulator of microglia-mediated neuroinflammation after SCI and provides clues for developing novel therapeutic approaches against SCI.

Efficient Construction of Excited-State Hessian Matrices with Machine Learning Accelerated Multilayer Energy-Based Fragment Method.

Recently, we have developed a multilayer energy-based fragment (MLEBF) method to describe excited states of large systems in which photochemically active and inert regions are separately treated with multiconfigurational and single-reference electronic structure method and their mutual polarization effects are naturally described within the many-body expansion framework. This MLEBF method has been demonstrated to provide highly accurate energies and gradients. In this work, we have further derived the MLEBF method with which highly accurate excited-state Hessian matrices of large systems are efficiently constructed. Moreover, in combination with recently proposed embedded atom neural network (EANN) model we have developed a machine learning (ML) accelerated MLEBF method (i.e., ML-MLEBF) in which photochemically inert region is entirely replaced with trained ML models. ML-MLEBF is found to improve computational efficiency of Hessian matrices in particular for large systems. Furthermore, both MLEBF and ML-MLEBF methods are highly parallel and exhibit low-scaling computational cost with multiple CPUs. The present developments could motivate combining various ML techniques with fragment-based electronic structure methods to explore Hessian-matrix-based excited-state properties of large systems.

The impact of healthcare worker influenza vaccination on nosocomial influenza in a tertiary hospital: an ecological study.

BACKGROUND: To protect hospitalized patients, who are more susceptible to complications of influenza, seasonal influenza vaccination of healthcare workers (HCW) has been recommended internationally. However, its effectiveness is still being debated. To assess the effectiveness of HCW influenza vaccination, we performed an ecological study to evaluate the association between healthcare worker influenza vaccination and the incidence of nosocomial influenza in a tertiary hospital within Singapore between 2013 and 2018. METHODS: Nosocomial influenza was defined as influenza among inpatients diagnosed 7 days or more after admission by laboratory testing, while healthcare worker influenza vaccination rate was defined as the proportion of healthcare workers that was vaccinated at the end of each annual seasonal vaccination exercise. A modified Poisson regression was performed to assess the association between the HCW vaccination rates and monthly nosocomial influenza incidence rates. RESULTS: Nosocomial influenza incidence rates followed the trend of non-nosocomial influenza, showing a predominant mid-year peak. Across 2,480,010 patient-days, there were 256 nosocomial influenza cases (1.03 per 10,000 patient-days). Controlling for background influenza activity and the number of influenza tests performed, no statistically significant association was observed between vaccination coverage and nosocomial influenza incidence rate although a protective effect was suggested (IRR 0.89, 95%CI:0.69-1.15, p = 0.37). CONCLUSION: No significant association was observed between influenza vaccination rates and nosocomial influenza incidence rates, although a protective effect was suggested. Aligning local HCW vaccine timing and formulation to that of the Southern Hemisphere may improve effectiveness. HCW vaccination remains important but demonstrating its effectiveness in preventing nosocomial influenza is challenging.

Exercise Affects Blood Glucose Levels and Tissue Chromium Distribution in High-Fat Diet-Fed C57BL6 Mice.

Obesity is commonly associated with hyperglycemia and type 2 diabetes and negatively affects chromium accumulation in tissues. Exercise prevents and controls obesity and type 2 diabetes. However, little information is available regarding chromium changes for regulating glucose homeostasis in high-fat diet (HFD)-fed animals/humans who exercise. Therefore, this study explored the effects of exercise and whether it alters chromium distribution in obese mice. Male C57BL6/J mice aged 4 weeks were randomly divided into two groups and fed either an HFD or standard diet (SD). Each group was subgrouped into two additional groups in which one subgroup was exposed to treadmill exercise for 12 weeks and the other comprised control mice. HFD-fed mice that exercised exhibited significant lower body weight gain, food/energy intake, daily food efficiency, and serum leptin and insulin levels than did HFD-fed control mice. Moreover, exercise reduced fasting glucose and enhanced insulin sensitivity and pancreatic ß-cell function, as determined by homeostasis model assessment (HOMA)-insulin resistance and HOMA-ß indices, respectively. Exercise also resulted in markedly higher chromium levels within the muscle, liver, fat tissues, and kidney but lower chromium levels in the bone and bloodstream in obese mice than in control mice. However, these changes were not noteworthy in SD-fed mice that exercised. Thus, exercise prevents and controls HFD-induced obesity and may modulate chromium distribution in insulin target tissues.

A multi-layer energy-based fragment method for excited states and nonadiabatic dynamics.

We developed a multi-layer energy-based fragment (MLEBF) method within the many-body energy expansion framework. It supplies accurate energies and gradients, and accurately reproduces excited-state topological structures. Moreover, MLEBF-based nonadiabatic dynamics simulations give nearly the same results compared with full ab initio ones. The present work could stimulate developing energy-based fragment methods for photochemistry of large systems.

QM and ONIOM studies on thermally activated delayed fluorescence of copper(i) complexes in gas phase, solution, and crystal.

Herein, we have employed B3LYP and TD-B3LYP methods with the QM/MM approach to study the thermally activated delayed fluorescence (TADF) phenomenon of two Cu(i) complexes bearing 5-(2-pyridyl)-tetrazolate (PyrTet) and phosphine (POP) ligands in the gas phase, solution, and crystal form. On the basis of spectroscopic properties, ground- and excited-state geometric and electronic structures, and related radiative and nonradiative rates, we have found that (1) the S1 and T1 excited states have clear metal-to-ligand charge transfer character from the Cu(i) atom to the PyrTet group; (2) the S1 and T1 states have a very small energy gap ΔES1-T1, less than 0.18 eV, which makes the forward and reverse intersystem crossing ISC and rISC processes between the S1 and T1 states very efficient; and (3) the low-frequency vibrational modes related to the torsional motion of the POP and PyrTet groups are found to have significant Huang-Rhys factors and are responsible for the efficient ISC and rISC rates. However, the corresponding Huang-Rhys factors are remarkably suppressed in the crystal compared with those in the gas phase and in solution due to the rigidity of the crystal surroundings; as a result, the ISC and rISC rates are accordingly reduced slightly in the crystal. This comparison also demonstrates that the surrounding effects are very important for modulating the photophysical properties of the Cu(i) complexes. Finally, our work gives helpful insights into the TADF mechanism of the Cu(i) compounds, which could assist in rationally designing TADF materials with excellent performance.

Group B Streptococcus Sequence Type 283 Disease Linked to Consumption of Raw Fish, Singapore.

An outbreak of invasive group B Streptococcus (GBS) disease occurred in Singapore in mid-2015. We conducted a case-control study of 22 adults with invasive GBS infections during June 21-November 21, 2015. Consumption of raw fish was strongly associated with invasive sequence type 283 infections, but not with non-sequence type 283 infections.