Discovery of Ferroelectricity in the Fullerene Adduct C60S8.

Fullerenes offer versatile functionalities and are promising materials for a widespread range of applications from biomedicine and energy to electronics. Great efforts have been made to manipulate the symmetries of fullerene and its derivatives for studying material properties and novel effects, such as ferroelectricity with polar symmetry; however, no documentary report has been obtained to realize their ferroelectricity. Here, for the first time, we demonstrated clear ferroelectricity in a fullerene adduct formed by C60 and S8. More is different: the combination of the most symmetric molecule C60 with the highest Ih symmetry and molecule S8 with high D4d symmetry resulted in the polar C60S8 adduct with a low crystallographic symmetry of the C2v (mm2) point group at room temperature. The presented C60S8 undergoes polar-to-polar ferroelectric phase transition with the mm2Fm notation, whose ferroelectricity was confirmed by a ferroelectric hysteresis loop and ferroelectric domain switching. This finding opens up a new functionality for fullerenes and sheds light on the exploration of more ferroelectric fullerenes.

Remarkable Enhancement of Piezoelectric Performance by Heavy Halogen Substitution in Hybrid Perovskite Ferroelectrics.

Piezoelectric materials that enable electromechanical conversion have great application value in actuators, transducers, sensors, and energy harvesters. Large piezoelectric (d33) and piezoelectric voltage (g33) coefficients are highly desired and critical to their practical applications. However, obtaining a material with simultaneously large d33 and g33 has long been a huge challenge. Here, we reported a hybrid perovskite ferroelectric [Me3NCH2Cl]CdBrCl2 to mitigate and roughly address this issue by heavy halogen substitution. The introduction of a large-size halide element softens the metal-halide bonds and reduces the polarization switching barrier, resulting in excellent piezoelectric response with a large d33 (∼440 pC/N), which realizes a significant optimization compared with that of previously reported [Me3NCH2Cl]CdCl3 (You et al. Science2017, 357, 306-309). More strikingly, [Me3NCH2Cl]CdBrCl2 simultaneously shows a giant g33 of 6215 × 10-3 V m/N, far exceeding those of polymers and conventional piezoelectric ceramics. Combined with simple solution preparation, easy processing of thin films, and a high Curie temperature of 373 K, these attributes make [Me3NCH2Cl]CdBrCl2 promising for high-performance piezoelectric sensors in flexible, wearable, and biomechanical devices.

A Homochiral Fulgide Organic Ferroelectric Crystal with Photoinduced Molecular Orbital Breaking.

Thermally triggered spatial symmetry breaking in traditional ferroelectrics has been extensively studied for manipulation of the ferroelectricity. However, photoinduced molecular orbital breaking, which is promising for optical control of ferroelectric polarization, has been rarely explored. Herein, for the first time, we synthesized a homochiral fulgide organic ferroelectric crystal (E)-(R)-3-methyl-3-cyclohexylidene-4-(diphenylmethylene)dihydro-2,5-furandione (1), which exhibits both ferroelectricity and photoisomerization. Significantly, 1 shows a photoinduced reversible change in its molecular orbitals from the 3 π molecular orbitals in the open-ring isomer to 2 π and 1 σ molecular orbitals in the closed-ring isomer, which enables reversible ferroelectric domain switching by optical manipulation. To our knowledge, this is the first report revealing the manipulation of ferroelectric polarization in homochiral ferroelectric crystal by photoinduced breaking of molecular orbitals. This finding sheds light on the exploration of molecular orbital breaking in ferroelectrics for optical manipulation of ferroelectricity.

Axial-Chiral BINOL Multiferroic Crystals with Coexistence of Ferroelectricity and Ferroelasticity.

Chirality exists everywhere from natural amino acids to particle physics. The introduction of point chirality has recently been shown to be an efficient strategy for the construction of molecular ferroelectrics. In contrast to point chirality, however, axial chirality is rarely used to design ferroelectrics so far. Here, based on optically active 1,1'-bi-2-naphthol (BINOL), which has been applied extensively as a versatile chiral reagent in asymmetric catalysis, chiral recognition, and optics, we successfully design a pair of axial-chiral BINOL multiferroics, (R)-BINOL-DIPASi and (S)-BINOL-DIPASi. They experience a 2F1-type full ferroelectric/ferroelastic phase transition at a high temperature of 362 and 363 K, respectively. Piezoelectric force microscopy and polarization-voltage hysteresis loops demonstrate their ferroelectric domains and domain switching, and polarized light microscopy visualizes the evolution of stripe-shaped ferroelastic domains. The axial-chiral BINOL building block promotes the generation of the polar structure and ferroelectricity, and the organosilicon component increases the rotational energy barrier and thus the phase transition temperature. This work presents the first axial-chiral high-temperature multiferroic crystals, offering an efficient path for designing molecular multiferroics through the introduction of axial chirality.

PFM (piezoresponse force microscopy)-aided design for molecular ferroelectrics.

With prosperity, decay, and another spring, molecular ferroelectrics have passed a hundred years since Valasek first discovered ferroelectricity in the molecular compound Rochelle salt. Recently, the proposal of ferroelectrochemistry has injected new vigor into this century-old research field. It should be highlighted that piezoresponse force microscopy (PFM) technique, as a non-destructive imaging and manipulation method for ferroelectric domains at the nanoscale, can significantly speed up the design rate of molecular ferroelectrics as well as enhance the ferroelectric and piezoelectric performances relying on domain engineering. Herein, we provide a brief review of the contribution of the PFM technique toward assisting the design and performance optimization of molecular ferroelectrics. Relying on the relationship between ferroelectric domains and crystallography, together with other physical characteristics such as domain switching and piezoelectricity, we believe that the PFM technique can be effectively applied to assist the design of high-performance molecular ferroelectrics equipped with multifunctionality, and thereby facilitate their practical utilization in optics, electronics, magnetics, thermotics, and mechanics among others.

Optimization of Ultrasonic-Assisted Extraction of Total Flavonoids from Abrus Cantoniensis (Abriherba) by Response Surface Methodology and Evaluation of Its Anti-Inflammatory Effect.

Abrus cantoniensis is a Chinese herbal medicine with efficacy in clearing heat and detoxification, as well as relieving liver pain. The whole plant, except the seeds, can be used and consumed. Flavonoids have been found in modern pharmacological studies to have important biological activities, such as anti-inflammatory, antibacterial and antioxidant properties. The antibacterial and antioxidant bioactivities of the total flavonoids of Abrus cantoniensis (ATF) have been widely reported in national and international journals, but there are fewer studies on their anti-inflammatory effects. The present study focused on the optimization of the ultrasonic extraction process of ATF by response surface methodology and the study of its anti-inflammatory effects in vitro and in vivo. The results showed that the factors that had a great impact on the ATF extraction were the material-to-liquid ratio, ultrasonic extraction cycles and ethanol concentration. The best extraction process used a material-to-liquid ratio of 1:47, ultrasonic extraction cycles of 4 times, an ethanol concentration of 50%, an ultrasonic extraction time of 40 min and an ultrasonic power of 125 W. Under these conditions, the actual extraction rate of total flavonoids was 3.68%, which was not significantly different from the predicted value of 3.71%. In an in vitro anti-inflammatory assay, ATF was found to be effective in alleviating LPS (lipopolysaccharide)-induced inflammation in mouse peritoneal macrophages. In an in vivo anti-inflammatory assay, ATF was found to have a significant inhibitory effect on xylene-induced ear swelling in mice and cotton ball granuloma in mice, and the inhibitory effect was close to that of the positive control drug dexamethasone. This may provide a theoretical basis for the further development of the medicinal value of Abrus cantoniensis.

Homochiral Multiferroic Cyanido-Bridged Dimetallic Complexes Assembled by C-F⋠⋠⋠K Interactions.

Cyanido-bridged dimetallic complexes are attracting attention due to their varied structures and properties. However, homochiral cyanido-bridged dimetallic complexes are rare, and making them ferroelectric is a great challenge. Introducing C-F⋅⋅⋅K interactions between the guest chiral cations and the host [KFe(CN)6 ]2- framework, gives three-dimensional cyanido-bridged dimetallic multiferroics, [R- and S-3-fluoropyrrolidinium]2 [KFe(CN)6 ] (R- and S-3-FPC). The mirror-symmetric vibrational circular dichroism (VCD) signal shows their enantiomeric nature. R- and S-3-FPC crystallize in the same chiral-polar space group P21 at 298 K. Piezoresponse force microscopy (PFM), polarizing optical microscopy, and temperature-dependent second-harmonic generation (SHG) measurements show their multiferroic properties (the coexistence of ferroelectricity and ferroelasticity), in line with the Aizu notation of 222F2. R-3-FPC shows excellent ferroelectricity with saturated polarization up to 9.4 µC cm-2 .

The First Chiro-Inositol Organosilicon Ferroelectric Crystal.

Organosilicons have been used extensively in aerospace, electronics, food, medicine and other fields, due to their low viscosity, hydrophobicity, corrosion resistance, non-toxic, and physiologically inert features. Despite extensive interest, however, organosilicon ferroelectric crystals have never been found. Here, by using the chemical design strategy, we successfully obtained a molecular ferroelectric D-chiro-inositol-SiMe3 with polar P43 symmetry, whose spontaneous polarization can be electrically switchable on thin film. The introduction of organosilicon groups endows the thin films with excellent softness, ductility and flexibility (extremely low hardness of 72.8 MPa and small elastic modulus of 5.04 GPa) that are desirable for biomedical and human-compatible applications. As the first case of organosilicon ferroelectric crystal to date, this work offers a new structural paradigm for molecular ferroelectrics, and highlights their potential for flexible bio-electronic applications.

Large Electrostrictive Coefficient in a Two-Dimensional Hybrid Perovskite Ferroelectric.

Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are attracting tremendous interest for their great scientific and technological potential in photovoltaics and optoelectronics. Although the ferroelectricity in 2D HOIPs has been greatly developed, however, to date no phosphonium-based 2D HOIP ferroelectrics have yet been found. Meanwhile, electrostriction plays an important role in the electromechanical behavior of ferroelectrics, while it has never been reported for 2D HOIP ferroelectrics. Here, we present the first phosphonium-based 2D HOIP ferroelectric (EATMP)PbBr4 (EATMP = (2-aminoethyl)trimethylphosphanium) with a direct bandgap of 2.84 eV. Notably, (EATMP)PbBr4 possesses a high Curie temperature of 534 K, which is the highest among all reported 2D HOIP ferroelectrics. Moreover, it exhibits a large electrostrictive coefficient of about 3.96 m4 C-2 as well, far exceeding those of PVDF (1.3 m4 C-2) and inorganic ones (∼0.034-0.096 m4 C-2). With excellent ferroelectric and piezoelectric properties and the merit of easy fabrication, (EATMP)PbBr4 shows great potential in applications for future smart devices of actuators, transducers, and sensors.

Record Enhancement of Curie Temperature in Host-Guest Inclusion Ferroelectrics.

Solid-state molecular rotor-type materials such as host-guest inclusion compounds are very desirable for the construction of molecular ferroelectrics. However, they usually have a low Curie temperature (Tc) and uniaxial nature, severely hindering their practical applications. Herein, by regulating the anion to control "momentum matching" in the crystal structure, we successfully designed a high-temperature multiaxial host-guest inclusion ferroelectric [(MeO-C6H4-NH3)(18-crown-6)][TFSA] (MeO-C6H4-NH3 = 4-methoxyanilinium, TFSA = bis(trifluoromethanesulfonyl)ammonium) with the Aizu notation of mmmFm. Compared to the parent uniaxial ferroelectric [(MeO-C6H4-NH3)(18-crown-6)][BF4] with a Tc of 127 K, the introduction of larger TFSA anions brings a lower crystal symmetry at room temperature and a higher energy barrier of molecular motions in phase transition, giving [(MeO-C6H4-NH3)(18-crown-6)][TFSA] multiaxial ferroelectricity and a high Tc up to 415 K (above that of BaTiO3). To our knowledge, such a record temperature enhancement of 288 K makes its Tc the highest among the reported crown-ether-based ferroelectrics, giving a wide working temperature range for applications in data storage, temperature sensing, actuation, and so on. This work will provide guidance and inspiration for designing high-Tc host-guest inclusion ferroelectrics.

Molecular Design Principles for Ferroelectrics: Ferroelectrochemistry.

Ferroelectric materials have a variety of technological applications, as transducers, capacitors, sensors, etc. Great interest in molecular ferroelectrics has emerged because of their structural flexibility, tunability, and homochirality. However, the discoveries of molecular ferroelectrics are not abundant. The lack of chemical design is the main challenge in realizing new molecular ferroelectrics. Consequently, chemical design approaches, including the ideas of introducing quasi-spherical theory, homochirality, and H/F substitution, have been developed recently. Through these advanced methodologies, a wide range of ferroelectrics were successfully synthesized, changing the blind search into a targeted chemical design. In this Perspective, we aim to provide insight into the fundamental chemistry and physics of molecular ferroelectrics and propose the concept of "ferroelectrochemistry", concerned with the targeted design and performance optimization of molecular ferroelectrics from the chemical point of view. We start with the basic theories used in the modification of chemical structures for new molecular ferroelectrics, such as the quasi-spherical theory. After that, we focus on the fundamentals of homochirality from the perspective of chemistry and advantages of introducing a homochiral molecule within the scope of ferroelectrics. Further, we explore another design strategy, H/F substitution, as an analogue of the H/D isotope effect. The introduction of a F atom usually does not change the polar point group but may induce a minor structural disruption that enhances physical properties such as Curie temperature and spontaneous polarization. We hope our comprehensive studies on the targeted design and performance optimization strategies for molecular ferroelectrics may build up and enrich the content of ferroelectrochemistry.

Organometallic-Based Hybrid Perovskite Piezoelectrics with a Narrow Band Gap.

Hybrid organic-inorganic perovskites (HOIPs) with the general formula ABX3 hold phenomenal research interest for their great scientific and technological potential in photovoltaic, piezoelectric, and electroluminescent devices. It is their considerable structural diversity that offers a good opportunity to build a variety of HOIP structures with various functionalities. However, no organometallic-based HOIP piezoelectrics have yet been found, despite the structural diversity and functional richness of organometallic compounds such as the ferrocene-based family. Here, for the first time, we report an organometallic-based HOIP piezoelectric, [(ferrocenylmethyl)trimethylammonium]PbI3. Benefitting from the stability of ferrocene-based cations, excellent piezoelectric performance, comparable to that of LiNbO3, can be obtained and optimized by tuning the anionic framework. The involvement of organometallic cations enables a narrow band gap of 2.37 eV, much lower than those of most HOIPs and some inorganic semiconductors. This work provides a new future direction for the study of perovskites and will inspire intriguing research on organometallic-based HOIP piezoelectrics.

Two-Dimensional Hybrid Perovskite Ferroelectric Induced by Perfluorinated Substitution.

Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs), which possess the merits of good material stability, structural diversity, and ease of fabrication, are highly desirable for widespread applications of ferroelectrics, solar cells, and electroluminescent devices. Although some molecular design strategies toward ferroelectrics have been proposed, however, it is still a great challenge to precisely induce and optimize the ferroelectricity in 2D HOIPs. Here, for the first time through perfluorinated substitution strategy, we successfully design a high-performance 2D HOIP ferroelectric, (perfluorobenzylammonium)2PbBr4, exhibiting more obvious second harmonic generation intensity, larger piezoelectric response, more polar axes, larger spontaneous polarization of 4.2 µC cm-2, and higher Curie temperature of 440 K than those of parent (benzylammonium)2PbBr4. Compared to the selective effect of monofluorinated substitution on different positions of the benzene ring, where (3-fluorobenzylammonium)2PbBr4 and (4-fluorobenzylammonium)2PbBr4 are not ferroelectrics, the pioneering perfluorinated substitution is more universal and effective for targeted design of aromatic ferroelectrics. This work offers an efficient strategy for precisely designing high-performance 2D HOIP ferroelectrics.

Confinement-Driven Ferroelectricity in a Two-Dimensional Hybrid Lead Iodide Perovskite.

Organic-inorganic hybrid perovskites (OIHPs) hold a great potential for scientific and technological endeavors in the field of ferroelectrics, solar cells, and electroluminescent devices, because of their structural diversity, low cost of manufacture, and ease of fabrication. However, lead iodide perovskite ferroelectrics with narrow band gap have rarely been reported. Here, we present a new two-dimensional (2D) layered lead iodide perovskite ferroelectric, (4,4-DFHHA)2PbI4 (4,4-DFHHA = 4,4-difluorohexahydroazepine), with a spontaneous polarization (Ps) of 1.1 µC/cm2 at room temperature, a direct bandgap of 2.32 eV, and a high Curie temperature Tc of 454 K (beyond that of BaTiO3, 393 K). On the basis of the nonferroelectrics (HHA)I, (4-FHHA)I, and (4,4-DFHHA)I (HHA = hexahydroazepine, 4-FHHA = 4-fluorohexahydroazepine), we assembled them with PbI2 to form lead iodide perovskites. Because the space between adjacent one-dimensional (1D) chains is relatively large and the confinement effect is not obvious, the cations are still in a disordered state, and 1D OIHPs (HHA)PbI3 and (4-FHHA)PbI3 are also nonferroelectrics at room temperature. In the confined environment of the 2D PbI42- framework for (4,4-DFHHA)2PbI4, the 4,4-DFHHA cations become ordered, and their asymmetric distribution leads to the spontaneous polarization. This work offers an efficient strategy for enriching the family of lead iodide perovskite ferroelectrics through the confinement effect and should inspire further exploration of the interplay between ferroelectricity and photovoltaics.

Bistable State of Protons for Low-Voltage Memories.

Molecular ferroelectrics are attracting tremendous interest because of their easy and environmental-friendly processing, low acoustic impedance, and mechanical flexibility. Their ferroelectric mechanism is mainly ascribed to the order-disorder transition of molecules such as spherical 1,4-diazabicyclo[2.2.2] octane (DABCO) and quinuclidine. Here, we present two molecular ferroelectrics, [HDABCO][TFSA] and its deuterated one [DDABCO][TFSA] (TFSA = bis(trifluoromethylsulfonyl)ammonium), whose ferroelectricity is triggered by the proton ordering. This is the first time that the protons show a thermally fluctuated bistability with a double-well potential in DABCO-based ferroelectrics. A large deuterium isotope effect (ΔT = ∼53 K) not only proves that they are hydrogen-bonded ferroelectrics but also extends the ferroelectric working temperature range to room temperature. The superfast polarization switching of 100 kHz and ultralow coercive voltage of 1 V (far less than 5 V required for commercially available ferroelectric devices), benefiting from the low energy for proton transfer, allow [DDABCO][TFSA] a great potential for memory devices with low-voltage, high-speed operation. This work should inspire further exploration of hydrogen-bonded molecular ferroelectrics for flexible and wearable devices with the low-power information storage.

Observation of Vortex Domains in a Two-Dimensional Lead Iodide Perovskite Ferroelectric.

Topological defects, such as vortices and skyrmions, provide a wealth of splendid possibilities for new nanoscale devices because of their marvelous electronic, magnetic, and mechanical behaviors. Recently, great advances have been made in the study of the ferroelectric vortex in conventional perovskite oxides, such as BaTiO3 and BiFeO3. Despite extensive interest, however, no intriguing ferroelectric vortex structures have yet been found in organic-inorganic hybrid perovskites (OIHPs), which are desirable for their mechanical flexibility, ease of fabrication, and low acoustical impedance. We observed the robust vortex-antivortex topological configurations in a two-dimensional (2D) layered OIHP ferroelectric (4,4-DFPD)2PbI4 (4,4-DFPD is 4,4-difluoropiperidinium). This provides future directions for the study of perovskites and makes it a promising alternative for nanoscale ferroelectric devices in medical, micromechanical, and biomechanical applications.

The Soft Molecular Polycrystalline Ferroelectric Realized by the Fluorination Effect.

For a century ferroelectricity has attracted widespread interest from science and industry. Inorganic ferroelectric ceramics have dominated multibillion dollar industries of electronic ceramics, ranging from nonvolatile memories to piezoelectric sonar or ultrasonic transducers, whose polarization can be reoriented in multiple directions so that they can be used in the ceramic and thin-film forms. However, the realization of macroscopic ferroelectricity in the polycrystalline form is challenging for molecular ferroelectrics. In pursuit of low-cost, biocompatible, and mechanically flexible alternatives, the development of multiaxial molecular ferroelectrics is imminent. Here, from quinuclidinium perrhenate, we applied fluorine substitution to successfully design a multiaxial molecular ferroelectric, 3-fluoroquinuclidinium perrhenate ([3-F-Q]ReO4), whose macroscopic ferroelectricity can be realized in both powder compaction and thin-film forms. The fluorination effect not only increases the intrinsic polarization but also reduces the coercive field strength. More importantly, it is also, as far as we know, the softest of all known molecular ferroelectrics, whose low Vickers hardness of 10.5 HV is comparable with that in poly(vinylidene difluoride) (PVDF) but almost 2 orders of magnitude lower than that in BaTiO3. These attributes make it an ideal candidate for flexible and wearable devices and biomechanical applications.

Rational Design of Ceramic-Like Molecular Ferroelectric by Quasi-Spherical Theory.

Molecular ferroelectrics are attracting tremendous interest because of their easy and environmentally friendly processing, light weight, low acoustical impedance, and mechanical flexibility, which are viable alternatives or supplements to conventional ceramic ferroelectrics. However, reports of ceramic-like molecular ferroelectrics that can be applied in the polycrystalline form have been scarce. Here, according to the "quasi-spherical theory", we successfully synthesized a ceramic-like molecular ferroelectric with an m3mFmm2 type phase transition at 357 K, 1,5-diazabicyclo[3.2.1]octonium tetrafluoroborate ([3.2.1-dabco]BF4), which can show excellent ferroelectric performance in the polycrystalline thin-film form at room temperature. On the basis of the reported molecular ferroelectric [2.2.2-dabco]BF4 (2.2.2-dabco = 1,4-diazabicyclo[2.2.2]octonium) with an Aizu notation of 4/mmmFmm2 and two polar axes, we changed the [2.2.2-dabco]+ cation to the [3.2.1-dabco]+ cation to reduce the molecular symmetry and keep the quasi-spherical shape simultaneously, making the number of polar axes up to six. Moreover, the spontaneous polarization Ps gets successfully increased from 4.9 µC cm-2 in [2.2.2-dabco]BF4 to 5.5 µC cm-2 in [3.2.1-dabco]BF4. This precise molecular design strategy offers an efficient pathway to design ceramic-like molecular ferroelectrics.

Two-Dimensional Layered Perovskite Ferroelectric with Giant Piezoelectric Voltage Coefficient.

Piezoelectric sensors that can work under various conditions with superior performance are highly desirable with the arrival of the Internet of Things. For practical applications, a large piezoelectric voltage coefficient g and a high Curie temperature Tc are critical to the performance of piezoelectric sensors. Here, we report a two-dimensional perovskite ferroelectric (4-aminotetrahydropyran)2PbBr4 [(ATHP)2PbBr4] with a saturated polarization of 5.6 µC cm-2, high Tc of 503 K [above that of BaTiO3 (BTO, 393 K)], and extremely large g33 of 660.3 × 10-3 V m N-1 [much beyond that of Pb(Zr,Ti)O3 (PZT) ceramics (20 to 40 × 10-3 V m N-1), more than 2 times higher than that of poly(vinylidene fluoride) (PVDF, about 286.7 × 10-3 V m N-1)]. Combined with the advantages of molecular ferroelectrics, such as light weight, easy and environmentally friendly processing, and mechanical flexibility, (ATHP)2PbBr4 would be a competitive candidate for next-generation smart piezoelectric sensors in flexible devices, soft robotics, and biomedical devices.

A Molecular Thermochromic Ferroelectric.

Molecular ferroelectrics have attracted considerable interests because of their easy and environmentally friendly processing, low acoustical impedance and mechanical flexibility. Herein, a molecular thermochromic ferroelectric, N,N'-dimethyl-1,4-diazoniabicyclo[2.2.2]octonium tetrachlorocuprate(II) ([DMe-DABCO]CuCl4 ) is reported, which shows both excellent ferroelectricity and intriguing thermochromism. [DMe-DABCO]CuCl4 undergoes a ferroelectric phase transition from Pca21 to Pbcm at a significantly high Curie temperature of 413 K, accompanied by a color change from yellow to red that is due to the remarkable deformation of [CuCl4 ]2- tetrahedron, where the ferroelectric and paraelectric phases correspond to yellow and red, respectively. Combined with multiple bistable physical properties, [DMe-DABCO]CuCl4 would be a promising candidate for next-generation smart devices, and should inspire further exploration of multifunctional molecular ferroelectrics.