RESUMO
Urban innovation and development are a core driver for promoting the industrial, economic, and social development of cities. However, the factors that affect the innovation and development of cities lack systematic analysis as well as interaction analysis. Based on a multidimensional perspective, this study suggests that natural, economic, and social factors are three major factors conditioning urban innovation and development. A grounded theoretical qualitative method is further adopted to code relevant research literatures, news reports and interview materials, resulting in an onion factors model. We find that natural factors-including environmental quality, geographic location, and city scale-are prerequisite for conditioning urban innovation and development. Economic factors are also key, including economic level, industrial structure, industrial agglomeration, and technological innovation. Social factors are guarantee factors, including administrative hierarchy, cultural environment, population structure, and government management and services, i.e., they are essential for cities to become adaptable in the current dynamic situation. The study provides theoretical support and practical directions for the formulation of policies for urban innovation development.
RESUMO
This study examines the combined effects of polyethylene microplastics (PE-MP) and copper (Cu2+) on the immune and oxidative response of Litopenaeus vannamei. PE-MP adsorbed with Cu2+ at 2.3, 6.8, and 16.8 ng (g shrimp)-1) were injected into L. vannamei. Over 14 days, survival rates were monitored, and immune and oxidative stress parameters were assessed. The results showed that combined exposure to PE-MP and Cu2+ significantly reduced the survival rate and decreased total haemocyte count. Immune-related parameters (phagocytic rate, phenoloxidase and superoxide dismutase (SOD)) and antioxidant-related parameters (SOD, catalase and glutathione peroxidase mRNA and enzyme) also decreased, while respiratory burst activity significantly increased, indicating immune and antioxidant system disruption. Additionally, there was a significant increase in oxidative stress, as measured by malondialdehyde levels. Histopathological analysis revealed severe muscle, hepatopancreas, and gill damage. These results suggest that simultaneous exposure to PE-MP and Cu2+ poses greater health risks to white shrimp.
Assuntos
Cobre , Microplásticos , Estresse Oxidativo , Penaeidae , Polietileno , Poluentes Químicos da Água , Animais , Penaeidae/efeitos dos fármacos , Cobre/toxicidade , Estresse Oxidativo/efeitos dos fármacos , Poluentes Químicos da Água/toxicidade , Polietileno/toxicidade , Microplásticos/toxicidade , Superóxido Dismutase/metabolismo , Brânquias/efeitos dos fármacos , Catalase/metabolismo , Glutationa Peroxidase/metabolismoRESUMO
OBJECTIVE: To investigate the clinical effect of unilateral percutaneous vertebroplasty (PVP) combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture. METHODS: A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study, all of which were vertebral body compression fractures caused by trauma. According to different treatment methods, they were divided into experimental group and control group. Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group, there were 5 males and 27 females, aged from 63 to 91 years old with an average of (77.59±8.75) years old. Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty, including 7 males and 38 females, aged from 60 to 88 years old with an average of(74.89±7.37) years old. Operation time, intraoperative C-arm X-ray times, anesthetic dosage, bone cement injection amount, bone cement diffusion good and good rate, complications, vertebral height, kyphotic angle (Cobb angle), visual analogue scale(VAS), Oswestry disability index (ODI) and other indicators were recorded before and after surgery, and statistically analyzed. RESULTS: All patients were followed up for 6 to 23 months, with preoperative imaging studies, confirmed for thoracolumbar osteoporosis compression fractures, two groups of patients with postoperative complications, no special two groups of patients' age, gender, body mass index (BMI), time were injured, the injured vertebral distribution had no statistical difference(P>0.05), comparable data. Two groups of patients with bone cement injection, bone cement dispersion rate, preoperative and postoperative vertebral body height, protruding after spine angle(Cobb angle), VAS, ODI had no statistical difference(P>0.05). The operative time, intraoperative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P<0.05). Compared with the traditional bilateral puncture group, the modified unilateral puncture group combined with 3D printing technology had shorter operation time, fewer intraoperative fluoroscopy times and less anesthetic dosage. The height of anterior vertebral edge, kyphosis angle (Cobb angle), VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P<0.05). CONCLUSION: In the treatment of thoracolumbar osteoporotic compression fractures, 3D printing technology is used to improve unilateral puncture PVP, which is convenient and simple, less trauma, short operation time, fewer fluoroscopy times, satisfactory distribution of bone cement, vertebral height recovery and kyphotic Angle correction, and good functional improvement.
Assuntos
Anestésicos , Fraturas por Compressão , Cifoplastia , Cifose , Fraturas por Osteoporose , Fraturas da Coluna Vertebral , Vertebroplastia , Masculino , Feminino , Humanos , Pessoa de Meia-Idade , Idoso , Idoso de 80 Anos ou mais , Fraturas por Compressão/cirurgia , Fraturas da Coluna Vertebral/cirurgia , Cimentos Ósseos , Resultado do Tratamento , Vertebroplastia/métodos , Cifose/cirurgia , Punções , Impressão Tridimensional , Tecnologia , Fraturas por Osteoporose/cirurgia , Estudos Retrospectivos , Cifoplastia/métodosRESUMO
The content of polycyclic aromatic hydrocarbons in pineapple leaf biochar was examined as a function of pyrolysis atmosphere (CO2 or N2), pyrolysis temperature (300-900 °C), and heteroatom (N, B, O, P, NP, or NS) doping. Without doping, the polycyclic aromatic hydrocarbon production was maximal (1332 ± 27 ng/g) in CO2 at 300 °C and minimal (157 ± 2 ng/g) in N2 at 700 °C. The main components naphthalene and acenaphthylene accounted for about 91% of the total polycyclic aromatic hydrocarbon in the biochar prepared under CO2 at 300 °C. Under the maximal polycyclic aromatic hydrocarbon production conditions (CO2, 300 °C), doping decreased the total hydrocarbon content by 49% (N), 61% (B), 73% (O), 92% (P), 93% (NB), and 96% (NS). The results shed new light on the management of polycyclic aromatic hydrocarbons in BC production by controlling the pyrolysis atmosphere and temperature in addition to heteroatom doping. Results significantly contributed to the development of circular bioeconomy.
Assuntos
Ananas , Hidrocarbonetos Policíclicos Aromáticos , Temperatura , Pirólise , Dióxido de Carbono , Carvão Vegetal , AtmosferaRESUMO
The accumulation of emerging organic contaminants (EOCs) in waste activated sludge (WAS) is a global concern. In this study, a multi-heteroatom nitrogen and sulfur was successfully embedded into lignin-based biochar (N-S-LGBC) and used it to activate calcium peroxide (CP) for the degradation of 4-nonylphenol (4-NP) in WAS. N-S-LGBC/CP was effective in degrading 85 % of 4-NP within 12 h through the activation of CP owing to hydroxyl radicals and singlet oxygen species generated from the synergism among pyrrolic-N, thiophenic-S, and lattice oxygen, i.e., active sites responsible for 4-NP degradation. These results highlight substrate biodegradability for subsequent bioprocesses that improves WAS treatment in EOC degradation by the N-S-LGBC/CP-mediated process. There was abundance of distinct Aggregatilinea genus within the phylum Chloroflexi during N-S-LGBC/CP treatment, indicating high 4-NP pretreatment efficiency in WAS. This work provides a new understanding of N-S-co-doped carbocatalysts in green and sustainable hydroxyl radical-driven carbon advanced oxidation (HR-CAOP) platforms for WAS remediation.
Assuntos
Lignina , Esgotos , Esgotos/química , Peróxidos/química , Carvão Vegetal/química , Metais , Radical HidroxilaRESUMO
BACKGROUND: Acne vulgaris is a chronic inflammatory skin disease of the pilosebaceous units which can affect the individual's physiological and psychological health. Abnormal growth of lipophilic anaerobic bacteria such as Propionibacterium acnes is reported to be a major factor in the development of acne. However, the relationship between skin microorganisms and acne has not been fully elucidated. Our study aimed to explore the microbial differences between patients with acne and healthy controls (HCs). METHODS: The study involved 16 participants diagnosed with acne vulgaris and 5 HCs. We collected skin microbe samples from the cheeks, brow, forehead, neck, chin, or chest of the participants with sterile cotton swabs depending on the location of the acne lesions. Cutaneous microbe samples from the participants were tested by 16s sequencing. RESULTS: Patients with acne showed increased diversity of skin microbiota in their samples. OTU535601 (Lachnospiraceae), OTU4460604 (Clostridiales), OTU3217705 (Moraxellaceae), OTU1066814 (Prevotella), and OTU455671 (Lactococcus garvieae) were the top 5 most abundant species found in patients with acne but were not present in HCs. OTU423327 (Achromobacter), OTU4423360 (Stenotrophomonas), OTU993127 (Porphyromonas), OTU677680 (Prevotella), and OTU269901 (Pseudomonas) were the top 5 most abundant species in HCs but were not found in patients with acne. CONCLUSIONS: The present study has analyzed and compared the diversity and abundance of microorganisms and the characteristics of the main pathogenic bacteria in patients with acne and HCs. Our findings indicate the importance of maintaining the skin's commensal microflora balance with the development of acne vulgaris.
Assuntos
Acne Vulgar , Microbiota , Humanos , Lactococcus , Propionibacterium acnesRESUMO
OBJECTIVE: To evaluate accuracy and safety of individualized 3D printing guided template for thoracolumbar pedicle screw placement in patients with ankylosing spondylitis. METHODS: From January 2016 to September 2019, thoracolumbar spine three-dimensional CT data of 8 patients with ankylosing spondylitis were included, Mimics 17.0 and ideaMaker computer software were applied to design thoracolumbar pedicle screw guided template of patients with AS, physical model of all patients (T10-L2)were printed by 3D printer, 2 parts in each patient, and divided into guide-plate-assisted screw group (experimental group) and free-hand nail group (control group). Thoracolumbar pedicle screws of both groups were placed by the same spinal surgeon. The accuracy of pedicle screw placement between two groups were evaluated according to results of postoperative CT, the accuracy of the fixation of thoracolumbar pedicle screw was divided into 4 grades, grade 0 and 1 screws were acceptable nails, grade 2 and 3 screws were unacceptable nails. The diameter and length of pedicle screws, the distance between entry point and posterior median line designed by preoperative 3D printing were compared with actual use in operation. RESULTS: Twenty three blocks of thoracolumbar 3D printing screw of ankylosing spondylitis guided templates were designed and printed in guide-plate-assisted screw group, 46 screws were inserted and 44 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (4.20±1.15) min, the frequency of X-ray was (5.00±1.25) times and the average adjustment times of screw and Kirschner needle during screw placement was (1.76±1.32) times. In the control group, 46 nails were placed by traditional surgical method and 30 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (14.67±2.23) min, the frequency of X-ray fluoroscopy was (14.46±2.21) times and the average times of Kirschner needle adjustment was (4.76±3.39) times. The success rates between experimental group and control group were 95.65%(44 / 46) and 56.22%(30 / 46) respectively, and had statistical difference (χ2=13.538, P<0.05). There was no significant difference in diameter, length of pedicle screws and the distance of posterior median line between virtual designed by 3D printing before operation and actual situation in opertaion (P>0.05). The operation time of inserting a single screw, the times of X-ray fluoroscopy, and the average times of adjustment screw and Kirschner needle in experimental group were significant less than those in control group(P<0.01). CONCLUSION: The personalized guide template assisted the thoracolumbar fixation designed by 3D printing could significantly improve safety, accuracy and efficiency of surgery, especially suitable for thoracolumbar vertebral bodies requiring posterior pedicle screw fixation for fracture or dislocation with AS.
Assuntos
Parafusos Pediculares , Fusão Vertebral , Espondilite Anquilosante , Cirurgia Assistida por Computador , Fluoroscopia , Humanos , Impressão TridimensionalRESUMO
To evaluate the photoprotective effect of 5-aminolaevulinic acid-based photodynamic therapy (ALA-PDT) on ultraviolet B (UVB)-induced skin photodamage. In vivo experiments, the dorsal skin of hairless mice were treated with ALA-PDT or saline-PDT, and then exposed to 180 mJ/m2 UVB. Results showed that the number of sunburn cells and apoptotic cells in the epidermis of ALA-PDT-treated groups at 24 h after UVB irradiation were significantly decreased compared with those in the UVB groups. And the removal rate of CPDs was obviously higher in ALA-PDT-treated groups. At 48 h, the number of Ki67 positive nuclei in ALA-PDT-UVB group was significantly fewer than that in UVB group. Further in vitro experiments, human keratinocyte cell line (HaCaT) cells of two groups (one treated with ALA-PDT, the other untreated), were exposed to 60 mJ/m2 UVB irradiation. We found 0.5 mmol/L of ALA and 3 J/cm2 of red light did not affect the vitality of cells, and could reduce UVB induced apoptosis, accelerate the clearance of CPDs, inhibit proliferation and activate p53. Thus, our data demonstrate that ALA-PDT pretreatment can induce a protective DNA damage response that protects skin cells from UVB-induced photodamages.
Assuntos
Dano ao DNA/efeitos da radiação , Ácidos Levulínicos/uso terapêutico , Fotoquimioterapia/métodos , Pele/metabolismo , Pele/efeitos da radiação , Raios Ultravioleta/efeitos adversos , Animais , Apoptose/efeitos da radiação , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos da radiação , Feminino , Citometria de Fluxo , Humanos , Camundongos , Camundongos Pelados , Camundongos Endogâmicos BALB C , Camundongos Nus , Proteína Supressora de Tumor p53/genética , Proteína Supressora de Tumor p53/metabolismo , Ácido AminolevulínicoRESUMO
Klebsiella pneumoniae-associated pathology is largely mediated by neutrophilic inflammation. In this study, we administered Klebsiella pneumoniae to experimental guinea pig groups and the ELR-CXC chemokine antagonist CXCL8(3-72), ceftazidime, and dexamethasone to different groups, respectively. After 24 h, we assessed the animal's pulmonary inflammatory levels, including gross histopathology, airway neutrophilia, lung myeloperoxidase levels, expressions of CXCL8 and TNF, and airway bacterial loads. Compared with ceftazidime and dexamethasone treatments, the administration of the ELR-CXC chemokine antagonist CXCL8(3-72) alone was more effective than other methods, although it did not markedly attenuate the bacterial load. These results suggest new methods for the treatment of Klebsiella pneumoniae pathology.