RESUMO
Heat stress is an abiotic factor that affects the photosynthetic parameters of plants. In this study, we examined the photosynthetic mechanisms underlying the rapid response of tobacco plants to heat stress in a controlled environment. To evaluate transient heat stress conditions, changes in photochemical, carboxylative, and fluorescence efficiencies were measured using an infrared gas analyser (IRGA Licor 6800) coupled with chlorophyll a fluorescence measurements. Our findings indicated that significant disruptions in the photosynthetic machinery occurred at 45 °C for 6 h following transient heat treatment, as explained by 76.2% in the principal component analysis. The photosynthetic mechanism analysis revealed that the dark respiration rate (Rd and Rd*CO2) increased, indicating a reduced potential for carbon fixation during plant growth and development. When the light compensation point (LCP) increased as the light saturation point (LSP) decreased, this indicated potential damage to the photosystem membrane of the thylakoids. Other photosynthetic parameters, such as AMAX, VCMAX, JMAX, and ΦCO2, also decreased, compromising both photochemical and carboxylative efficiencies in the Calvin-Benson cycle. The energy dissipation mechanism, as indicated by the NPQ, qN, and thermal values, suggested that a photoprotective strategy may have been employed. However, the observed transitory damage was a result of disruption of the electron transport rate (ETR) between the PSII and PSI photosystems, which was initially caused by high temperatures. Our study highlights the impact of rapid temperature changes on plant physiology and the potential acclimatisation mechanisms under rapid heat stress. Future research should focus on exploring the adaptive mechanisms involved in distinguishing mutants to improve crop resilience against environmental stressors.
RESUMO
The differential effects of cellular and ultrastructural characteristics on the optical properties of adaxial and abaxial leaf surfaces in the genus Tradescantia highlight the intricate relationships between cellular arrangement and pigment distribution in the plant cells. We examined hyperspectral and chlorophyll a fluorescence (ChlF) kinetics using spectroradiometers and optical and electron microscopy techniques. The leaves were analysed for their spectral properties and cellular makeup. The biochemical compounds were measured and correlated with the biophysical and ultrastructural features. The main findings showed that the top and bottom leaf surfaces had different amounts and patterns of pigments, especially anthocyanins, flavonoids, total phenolics, chlorophyll-carotenoids, and cell and organelle structures, as revealed by the hyperspectral vegetation index (HVI). These differences were further elucidated by the correlation coefficients, which influence the optical signatures of the leaves. Additionally, ChlF kinetics varied between leaf surfaces, correlating with VIS-NIR-SWIR bands through distinct cellular structures and pigment concentrations in the hypodermis cells. We confirmed that the unique optical properties of each leaf surface arise not only from pigmentation but also from complex cellular arrangements and structural adaptations. Some of the factors that affect how leaves reflect light are the arrangement of chloroplasts, thylakoid membranes, vacuoles, and the relative size of the cells themselves. These findings improve our knowledge of the biophysical and biochemical reasons for leaf optical diversity, and indicate possible implications for photosynthetic efficiency and stress adaptation under different environmental conditions in the mesophyll cells of Tradescantia plants.
Assuntos
Folhas de Planta , Tradescantia , Tradescantia/metabolismo , Folhas de Planta/metabolismo , Folhas de Planta/ultraestrutura , Fluorescência , Clorofila/metabolismo , Clorofila A/metabolismoRESUMO
Hyperspectral technology offers significant potential for non-invasive monitoring and prediction of morphological parameters in plants. In this study, UV-VIS-NIR-SWIR reflectance hyperspectral data were collected from Nicotiana tabacum L. plants using a spectroradiometer. These plants were grown under different light and gibberellic acid (GA3) concentrations. Through spectroscopy and multivariate analyses, key growth parameters, such as height, leaf area, energy yield, and biomass, were effectively evaluated based on the interaction of light with leaf structures. The shortwave infrared (SWIR) bands, specifically SWIR1 and SWIR2, showed the strongest correlations with these growth parameters. When classifying tobacco plants grown under different GA3 concentrations in greenhouses, artificial intelligence (AI) and machine learning (ML) algorithms were employed, achieving an average accuracy of over 99.1% using neural network (NN) and gradient boosting (GB) algorithms. Among the 34 tested vegetation indices, the photochemical reflectance index (PRI) demonstrated the strongest correlations with all evaluated plant phenotypes. Partial least squares regression (PLSR) models effectively predicted morphological attributes, with R2CV values ranging from 0.81 to 0.87 and RPDP values exceeding 2.09 for all parameters. Based on Pearson's coefficient XYZ interpolations and HVI algorithms, the NIR-SWIR band combination proved the most effective for predicting height and leaf area, while VIS-NIR was optimal for optimal energy yield, and VIS-VIS was best for predicting biomass. To further corroborate these findings, the SWIR bands for certain morphological characteristic wavelengths selected with s-PLS were most significant for SWIR1 and SWIR2, while i-PLS showed a more uniform distribution in VIS-NIR-SWIR bands. Therefore, SWIR hyperspectral bands provide valuable insights into developing alternative bands for remote sensing measurements to estimate plant morphological parameters. These findings underscore the potential of remote sensing technology for rapid, accurate, and non-invasive monitoring within stationary high-throughput phenotyping systems in greenhouses. These insights align with advancements in digital and precision technology, indicating a promising future for research and innovation in this field.
RESUMO
Reflectance hyperspectroscopy is recognised for its potential to elucidate biochemical changes, thereby enhancing the understanding of plant biochemistry. This study used the UV-VIS-NIR-SWIR spectral range to identify the different biochemical constituents in Hibiscus and Geranium plants. Hyperspectral vegetation indices (HVIs), principal component analysis (PCA), and correlation matrices provided in-depth insights into spectral differences. Through the application of advanced algorithms-such as PLS, VIP, iPLS-VIP, GA, RF, and CARS-the most responsive wavelengths were discerned. PLSR models consistently achieved R2 values above 0.75, presenting noteworthy predictions of 0.86 for DPPH and 0.89 for lignin. The red-edge and SWIR bands displayed strong associations with pivotal plant pigments and structural molecules, thus expanding the perspectives on leaf spectral dynamics. These findings highlight the efficacy of spectroscopy coupled with multivariate analysis in evaluating the management of biochemical compounds. A technique was introduced to measure the photosynthetic pigments and structural compounds via hyperspectroscopy across UV-VIS-NIR-SWIR, underpinned by rapid multivariate PLSR. Collectively, our results underscore the burgeoning potential of hyperspectroscopy in precision agriculture. This indicates a promising paradigm shift in plant phenotyping and biochemical evaluation.
RESUMO
Os levantamentos pedológicos são amplamente utilizados nos mapeamentos de solo por serem métodos confiáveis, no entanto, apesar de tal vantagem são demorados e trabalhosos. Dentro deste contexto, surge o sensoriamento remoto como uma técnica rápida e promissora capaz de auxiliar nos levantamentos, de forma a tornar o processo mais dinâmico. O objetivo deste trabalho foi avaliar a possibilidade de discriminação de cinco classes de solos localizadas no planalto de Apucarana por meio de suas respostas espectrais. Foi estabelecido um grid de 500 m x 500 m em uma área com dimensão de 2500 ha, a partir do qual foram coletadas amostras a 0-0,2 m e 0,8-1,0 m de profundidade. As reflectâncias foram obtidas com o FiedSpec 3 JR, na faixa de 350 a 2500 nm. Equações discriminantes e simulações foram geradas a partir das respostas espectrais das amostras de solo. Das 88 variáveis avaliadas, apenas 8 foram selecionadas pelo procedimento STEPDISC para fazerem parte dos modelos. As equações discriminantes geradas foram testadas, obtendo-se matrizes de confusão, as quais apresentaram acerto acima de 70% para cada classe de solo. Da mesma forma, equações discriminantes simuladas foram geradas, obtendo-se resultados mais significativos para reclassificação quando utilizados dados que fizeram parte da geração do modelo (60%) em comparação com os dados independentes do modelo (40%). As respostas espectrais das amostras de solo empregadas na análise discriminante foram capazes de dar subsídio para separação das cinco classes de solo da área de estudo, comprovando ser uma ferramenta valiosa mesmo em condições de elevada variabilidade pedológica e de atributos como em regiões transicionais.
The pedological surveys are widely used in soil mapping because they are reliable methods, however, although this advantage are time consuming and laborious. Within this context, remote sensing appears as a quickly and promising technique able to assist in the surveys in order to make the process more dynamic. The objective this work was to evaluate the possibility of discrimination of five classes of soils located in the plateau of Apucarana through their spectral responses. Was established a grid of 500 m x 500 m in an area with dimensions of 2500 ha, from which samples were collected at 0 to 0.2 and of 0.8 to 1.0 m deep. The reflectances were obtained with the FiedSpec 3 JR, in the range 350 to 2500 nm. Discriminant equations and simulations were generated from the spectral responses of soil samples. Of the 88 variables evaluated, only 8 were selected by the procedure STEPDISC to be part of the models. The discriminant equations generated were tested, resulting in confusion matrices, which showed accuracy above 70% for each class of soil. Likewise, simulated discriminant equations were generated, obtaining most significant results for reclassification when used data that were part of the model generation (60%) in comparison with the model independent data (40%). The spectral responses of soil samples used in discriminant analysis were able to give support for separation of five classes of soil in the study area, proving to be a valuable tool even in conditions of high pedological and attribute variability as in transitional regions.