RESUMO
Three-dimensional (3D) printing1-9 has revolutionized manufacturing processes for electronics10-12, optics13-15, energy16,17, robotics18, bioengineering19-21 and sensing22. Downscaling 3D printing23 will enable applications that take advantage of the properties of micro- and nanostructures24,25. However, existing techniques for 3D nanoprinting of metals require a polymer-metal mixture, metallic salts or rheological inks, limiting the choice of material and the purity of the resulting structures. Aerosol lithography has previously been used to assemble arrays of high-purity 3D metal nanostructures on a prepatterned substrate26,27, but in limited geometries26-30. Here we introduce a technique for direct 3D printing of arrays of metal nanostructures with flexible geometry and feature sizes down to hundreds of nanometres, using various materials. The printing process occurs in a dry atmosphere, without the need for polymers or inks. Instead, ions and charged aerosol particles are directed onto a dielectric mask containing an array of holes that floats over a biased silicon substrate. The ions accumulate around each hole, generating electrostatic lenses that focus the charged aerosol particles into nanoscale jets. These jets are guided by converged electric-field lines that form under the hole-containing mask, which acts similarly to the nozzle of a conventional 3D printer, enabling 3D printing of aerosol particles onto the silicon substrate. By moving the substrate during printing, we successfully print various 3D structures, including helices, overhanging nanopillars, rings and letters. In addition, to demonstrate the potential applications of our technique, we printed an array of vertical split-ring resonator structures. In combination with other 3D-printing methods, we expect our 3D-nanoprinting technique to enable substantial advances in nanofabrication.
RESUMO
Fast diffusion of charge carriers is crucial for efficient charge collection in perovskite solar cells. While lateral transient photoluminescence microscopies have been popularly used to characterize charge diffusion in perovskites, there exists a discrepancy between low diffusion coefficients measured and near-unity charge collection efficiencies achieved in practical solar cells. Here, we reveal hidden microscopic dynamics in halide perovskites through four-dimensional (directions x, y and z and time t) tracking of charge carriers by characterizing out-of-plane diffusion of charge carriers. By combining this approach with confocal microscopy, we discover a strong local heterogeneity of vertical charge diffusivities in a three-dimensional perovskite film, arising from the difference between intragrain and intergrain diffusion. We visualize that most charge carriers are efficiently transported through the direct intragrain pathways or via indirect detours through nearby areas with fast diffusion. The observed anisotropy and heterogeneity of charge carrier diffusion in perovskites rationalize their high performance as shown in real devices. Our work also foresees that further control of polycrystal growth will enable solar cells with micrometres-thick perovskites to achieve both long optical path length and efficient charge collection simultaneously.
Assuntos
Compostos de Cálcio , Compostos Inorgânicos , Óxidos , Microscopia ConfocalRESUMO
Soyasaponin is a type of glycoside such as steroids, steroidal alkaloids or triterpenes, which enhance the body immunity. In order to efficiently identify genes and markers related to the soyasaponin, we used a 180K Axiom® SoyaSNP array and whole genome resequencing data from the Korean soybean core collection. As a result of conducting GWAS for group A soyasaponin (Aa and Ab derivatives), 16 significant common markers associated with Aa and Ab derivatives were mapped to chromosome 7, and three candidate genes including Glyma.07g254600 were detected. The functional haplotypes for candidate genes showed that Aa and Ab contents were mainly determined by alleles of AX-90322128, the marker of Glyma.07g254600. In addition, 14 novel SNPs variants closely associated with Aa and Ab derivatives were discovered for Glyma.07g254600. Therefore, the results of this study that identified soyasaponin-associated markers and useful genes utilizing various genomic information could provide insight into functional soybean breeding.
Assuntos
Glycine max , Polimorfismo de Nucleotídeo Único , Estudo de Associação Genômica Ampla/métodos , Melhoramento Vegetal , Locos de Características Quantitativas , Glycine max/genéticaRESUMO
Soybean seeds consist of approximately 40% protein and 20% oil, making them one of the world's most important cultivated legumes. However, the levels of these compounds are negatively correlated with each other and regulated by quantitative trait loci (QTL) that are controlled by several genes. In this study, a total of 190 F2 and 90 BC1F2 plants derived from a cross of Daepung (Glycine max) with GWS-1887 (G. soja, a source of high protein), were used for the QTL analysis of protein and oil content. In the F2:3 populations, the average protein and oil content was 45.52% and 11.59%, respectively. A QTL associated with protein levels was detected at Gm20_29512680 on chr. 20 with a likelihood of odds (LOD) of 9.57 and an R2 of 17.2%. A QTL associated with oil levels was also detected at Gm15_3621773 on chr. 15 (LOD: 5.80; R2: 12.2%). In the BC1F2:3 populations, the average protein and oil content was 44.25% and 12.14%, respectively. A QTL associated with both protein and oil content was detected at Gm20_27578013 on chr. 20 (LOD: 3.77 and 3.06; R2 15.8% and 10.7%, respectively). The crossover to the protein content of BC1F3:4 population was identified by SNP marker Gm20_32603292. Based on these results, two genes, Glyma.20g088000 (S-adenosyl-l-methionine-dependent methyltransferases) and Glyma.20g088400 (oxidoreductase, 2-oxoglutarate-Fe(II) oxygenase family protein), in which the amino acid sequence had changed and a stop codon was generated due to an InDel in the exon region, were identified.
Assuntos
Glycine max , Locos de Características Quantitativas , Glycine max/genética , Proteínas de Plantas/genética , Sementes/metabolismo , Glicina/metabolismoRESUMO
A Gram-stain-negative, facultatively anaerobic, motile by gliding, rod-shaped, oxidase- and catalase-positive bacterial strain, designated BB8T, was isolated from the stems of a Korean soybean cultivar (Glycine max L. cv. Gwangan). The strain produced a yellow pigment on tryptic soy agar. Growth of strain BB8T occurred at pH 5.0-8.0 (optimum, pH 7.0), at 10-35 °C (optimum, 25-30 °C) and in the presence of 0-1â% (w/v) NaCl (optimum, 0.5%). Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain BB8T formed a lineage within the genus Flavobacterium and was most closely related to Flavobacterium artemisiae SYP-B1015T (96.9â% 16S rRNA gene sequence similarity) and Flavobacterium ustbae T13T (96.8%). The complete genome sequence of strain BB8T was 5â513â159 bp long with a G+C content of 34.1 mol%. The major fatty acids (>10â%) of strain BB8T were iso-C15â:â0 (21â%), summed feature 3 (comprising C16â:â1 ω7c and/or C16â:â1 ω6c, 20.3%) and iso-C16â:â0 3-OH (13.7%). The predominant polar lipids were phosphatidylethanolamine and unidentified aminolipids, and the major respiratory quinone was menaquinone-6. Based on these phenotypic, genotypic and chemotaxonomic characteristics, strain BB8T is considered to represent a novel species of the genus Flavobacterium, for which the name Flavobacterium endoglycinae sp. nov. is proposed. The type strain is BB8T (=KCTC 82167T=CCTCC AB 2020070T).
Assuntos
Flavobacterium , Glycine max , Filogenia , Técnicas de Tipagem Bacteriana , Composição de Bases , DNA Bacteriano/genética , Ácidos Graxos/química , Flavobacterium/classificação , Flavobacterium/isolamento & purificação , Fosfolipídeos/química , Caules de Planta/microbiologia , RNA Ribossômico 16S/genética , República da Coreia , Análise de Sequência de DNA , Glycine max/microbiologia , Vitamina K 2/análogos & derivados , Vitamina K 2/químicaRESUMO
A laser altimeter using code modulation techniques receives a backscattered pulse wider than the transmitted rectangular pulse when scanning a rough or sloped target surface. This leads to degrading the ranging performance in terms of signal-to-noise ratio (SNR) and detection probability. Unlike the pulsed techniques, little work has focused on the pulse broadening effect of the code modulation techniques. In this study, mathematical models were derived to investigate the pulse broadening effect on the ranging performance of a return-to-zero pseudorandom noise (RZPN) laser altimeter. Considering that the impulse response can be approximated by a Gaussian function, the analytical waveform was derived using a new flat-topped multi-Gaussian beam (FMGB) model. The closed-form expressions were also analytically derived for a peak cross-correlation, SNR, and detection probability in terms of the pulse broadening effect. With the use of a three-dimensional model of asteroid Itokawa for practical surface profiles, the analytical expressions were validated by comparing to the results obtained from numerical simulations. It was also demonstrated that the pulse broadening effect dropped down the peak cross-correlation and then deteriorated the ranging performance. These analytical expressions will play an important role in not only designing a laser altimeter using the RZPN code modulation technique but also analyzing its ranging performance.
RESUMO
Electrode architecturing for fast electrochemical reaction is essential for achieving high-performance of low-temperature solid oxide fuel cells (LT-SOFCs). However, the conventional droplet infiltration technique still has limitations in terms of the applicability and scalability of nanocatalyst implementation. Here, we develop a novel two-step precursor infiltration process and fabricate high-performance LT-SOFCs with homogeneous and robust nanocatalysts. This novel infiltration process is designed based on the principle of a reversible sol-gel transition where the gelated precursor dendrites are uniformly deposited onto the electrode via controlled nanoscale electrospraying process then resolubilized and infiltrated into the porous electrode structure through subsequent humidity control. Our infiltration technique reduces the cathodic polarization resistance by 18% compared to conventional processes, thereby achieving an enhanced peak power density of 0.976 W cm-2 at 650 °C. These results, which provide various degrees of freedom for forming nanocatalysts, exhibit an advancement in LT-SOFC technology.
RESUMO
Recently developed flexible mechanosensors based on inorganic silicon, organic semiconductors, carbon nanotubes, graphene platelets, pressure-sensitive rubber and self-powered devices are highly sensitive and can be applied to human skin. However, the development of a multifunctional sensor satisfying the requirements of ultrahigh mechanosensitivity, flexibility and durability remains a challenge. In nature, spiders sense extremely small variations in mechanical stress using crack-shaped slit organs near their leg joints. Here we demonstrate that sensors based on nanoscale crack junctions and inspired by the geometry of a spider's slit organ can attain ultrahigh sensitivity and serve multiple purposes. The sensors are sensitive to strain (with a gauge factor of over 2,000 in the 0-2 per cent strain range) and vibration (with the ability to detect amplitudes of approximately 10 nanometres). The device is reversible, reproducible, durable and mechanically flexible, and can thus be easily mounted on human skin as an electronic multipixel array. The ultrahigh mechanosensitivity is attributed to the disconnection-reconnection process undergone by the zip-like nanoscale crack junctions under strain or vibration. The proposed theoretical model is consistent with experimental data that we report here. We also demonstrate that sensors based on nanoscale crack junctions are applicable to highly selective speech pattern recognition and the detection of physiological signals. The nanoscale crack junction-based sensory system could be useful in diverse applications requiring ultrahigh displacement sensitivity.
Assuntos
Biomimética/métodos , Movimento , Nanotecnologia/métodos , Reconhecimento Automatizado de Padrão/métodos , Som , Aranhas/fisiologia , Vibração , Animais , Humanos , Mecanotransdução Celular/fisiologia , Música , Nanotecnologia/instrumentação , Platina/química , Maleabilidade , Pressão , Pele , Fala , Aranhas/anatomia & histologia , Asas de Animais/fisiologiaRESUMO
Data phenotyping traits on soybean seeds such as shape and color has been obscure because it is difficult to define them clearly. Further, it takes too much time and effort to have sufficient number of samplings especially length and width. These difficulties prevented seed morphology to be incorporated into efficient breeding program. Here, we propose methods for an image acquisition, a data processing, and analysis for the morphology and color of soybean seeds by high-throughput method using images analysis. As results, quantitative values for colors and various types of morphological traits could be screened to create a standard for subsequent evaluation of the genotype. Phenotyping method in the current study could define the morphology and color of soybean seeds in highly accurate and reliable manner. Further, this method enables the measurement and analysis of large amounts of plant seed phenotype data in a short time, which was not possible before. Fast and precise phenotype data obtained here may facilitate Genome Wide Association Study for the gene function analysis as well as for development of the elite varieties having desirable seed traits.
Assuntos
Técnicas Biossensoriais , Glycine max/anatomia & histologia , Ensaios de Triagem em Larga Escala , Sementes/anatomia & histologia , Cruzamento , Genótipo , Humanos , Fenótipo , Locos de Características Quantitativas/genética , Sementes/genética , Glycine max/genéticaRESUMO
The global electro-optical (EO) and laser tracking sensor network was considered to investigate improvements to orbit prediction (OP) accuracy of space debris by combining angle and laser ranging data. However, it is worth noting that weather, schedule and visibility constraints can frequently limit the operations of such sensors, which may not result in sufficient tracking data for accurate OP. In this study, several 1-day OP results for low Earth orbit (LEO) space debris targets were demonstrated under a limited observation environment to verify the OP accuracy through the combination of angle and laser ranging data from two sites. For orbit determination (OD) processes, it was considered to analyze the OP accuracy by one site providing both 2-day arc angle data and 1-day arc laser ranging data, while the other was limited to 1-day arc angle data. In addition, the initial ballistic coefficient ( B C ) application method was proposed and implemented for the improvement of OD/OP accuracy, which introduces the modified correction factor depending on the drag coefficient. In the cases of combining the angle and laser ranging data, the OP results show the 3D position difference values are below 100 m root mean square (RMS) with small position uncertainty. This value satisfies the target OP accuracy for conjunction assessments and blind laser ranging (about 50-100 m at 1000 km altitude). The initial B C application method also shows better OP accuracy than the method without the correction factor.
RESUMO
Recent research progress of relieving discomfort between electronics and human body involves serpentine designs, ultrathin films, and extraordinary properties of nanomaterials. However, these strategies addressed thus far each face own limitation for achieving desired form of electronic-skin applications. Evenly matched mechanical properties anywhere on the body and imperceptibility of electronics are two essentially required characteristics for future electronic-skin (E-skin) devices. Yet accomplishing these two main properties simultaneously is still very challenging. Hence, we propose a novel fabrication method to introduce kirigami approach to pattern a highly conductive and transparent electrode into diverse shapes of stretchable electronics with multivariable configurability for E-skin applications. These kirigami engineered patterns impart tunable elasticity to the electrodes, which can be designed to intentionally limit strain or grant ultrastretchability depending on applications over the range of 0 to over 400% tensile strain with strain-invariant electrical property and show excellent strain reversibility even after 10â¯000 cycles stretching while exhibiting high optical transparency (>80%). The versatility of this work is demonstrated by ultrastretchable transparent kirigami heater for personal thermal management and conformal transparent kirigami electrophysiology sensor for continuous health monitoring of human body conditions. Finally, by integrating E-skin sensors with quadrotor drones, we have successfully demonstrated human-machine-interface using our stretchable transparent kirigami electrodes.
Assuntos
Nanoestruturas/química , Nanofios/química , Dispositivos Eletrônicos Vestíveis , Elasticidade , Condutividade Elétrica , HumanosRESUMO
A simple, low-cost, large area, and continuous scalable coating method is proposed for the fabrication of hybrid organic-inorganic perovskite solar cells. A megasonic spray-coating method utilizing a 1.7 MHz megasonic nebulizer that could fabricate reproducible large-area planar efficient perovskite films is developed. The coating method fabricates uniform large-area perovskite film with large-sized grain since smaller and narrower sized mist droplets than those generated by existing ultrasonic spray methods could be generated by megasonic spraying. The volume flow rate of the CH3 NH3 PbI3 precursor solution and the reaction temperature are controlled, to obtain a high quality perovskite active layer. The devices reach a maximum efficiency of 16.9%, with an average efficiency of 16.4% from 21 samples. The applicability of megasonic spray coating to the fabrication of large-area solar cells (1 cm2 ), with a power conversion efficiency of 14.2%, is also demonstrated. This is a record high efficiency for large-area perovskite solar cells fabricated by continuous spray coating.
RESUMO
Platinum is still the most active element for the hydrogen evolution reaction (HER); however, it suffers from its scarcity and high cost. Thus, significant efforts have been dedicated to maximize the catalytic activity with less loading. When Pt is utilized at a semiconductor surface, more factors have to be considered. Placing a catalyst directly in contact with a semiconductor supports the extraction of photogenerated minority carriers as well as boosts the catalytic reactions. In addition, a catalyst should be designed with prudence not to interfere in the light path with respect to absorption at the underlying substrate. Herein, we report the development of planar Si-based photocathodes, covered with a native oxide, for the HER, which also satisfy the prerequisites for the use of a three-dimensionally patterned, flower-like Ag-Pt catalyst. The catalyst consisted of nanoparticles of homogeneously alloyed Ag and Pt, fabricated by a galvanic exchange of Pt with Ag. Importantly, these two elements were proven to have their own functionalities. Ag not only contributed to transporting e- and Had to the Pt for subsequent processes of the HER but also effectively extracted minority carriers by diluting the high work function of Pt, leading to a better Schottky barrier at the catalyst-insulator-semiconductor junction. Furthermore, computational simulation revealed that the proposed catalyst pattern alleviated optical light loss with the increasing catalyst loading compared to the two-dimensional case. Owing to these effects, we could achieve 0.36 V (vs. reversible hydrogen electrode) as an open circuit potential and the near maximum current density of planar p-type Si. The findings in this work suggests deeper insights that could support the design of catalysts for solar-fuel systems.
RESUMO
In this report, we introduce a method utilizing ion-assisted aerosol lithography to stack 3D nanostructures vertically. The stacked 3D nanostructures exhibit extraordinary optical properties: the double layer 3D nanostructures show more than 5-fold increased surface enhanced Raman scattering intensities compared to their single layer counterpart. This unusual enhancement of Raman intensity implies the existence of additional vertical hotspots formed by interlayer cavity effects between the lower and upper nanostructures. Allowing for full three-dimensional control in nanofabrication, this work provides a reliable way to create complex-shaped advanced optical nanostructures with non-intuitive bulk optical properties.
RESUMO
Enhancing hole extraction inside the perovskite layer is the key factor for boosting photovoltaic performance. Realization of halide concentration gradient perovskite materials has been expected to exhibit rapid hole extraction due to the precise bandgap tuning. Moreover, a formation of Br-rich region on the tri-iodide perovskite layer is expected to enhance moisture stability without a loss of current density. However, conventional synthetic techniques of perovskite materials such as the solution process have not achieved the realization of halide concentration gradient perovskite materials. In this report, we demonstrate the fabrication of Br concentration gradient mixed halide perovskite materials using a novel and facile halide conversion method based on vaporized hydrobromic acid. Accelerated hole extraction and enhanced lifetime due to Br gradient was verified by observing photoluminescence properties. Through the combination of secondary ion mass spectroscopy and transmission electron microscopy with energy-dispersive X-ray spectroscopy analysis, the diffusion behavior of Br ions in perovskite materials was investigated. The Br-gradient was found to be eventually converted into a homogeneous mixed halide layer after undergoing an intermixing process. Br-substituted perovskite solar cells exhibited a power conversion efficiency of 18.94% due to an increase in open circuit voltage from 1.08 to 1.11 V and an advance in fill-factor from 0.71 to 0.74. Long-term stability was also dramatically enhanced after the conversion process, i.e., the power conversion efficiency of the post-treated device has remained over 97% of the initial value under high humid conditions (40-90%) without any encapsulation for 4 weeks.
RESUMO
A moth-eye nanostructured mp-TiO2 film using conventional lithography, nano-imprinting and polydimethyl-siloxane (PDMS) stamping methods is demonstrated for the first time. Power conversion efficiency of the moth-eye patterned perovskite solar cell is improved by ≈11%, which mainly results from increasing light harvesting efficiency by structural optical property.
RESUMO
We report three-dimensionally assembled nanoparticle structures inducing multiple plasmon resonances for broadband light harvesting in nanocrystalline silicon (nc-Si:H) thin-film solar cells. A three-dimensional multiscale (3DM) assembly of nanoparticles generated using a multi-pin spark discharge method has been accomplished over a large area under atmospheric conditions via ion-assisted aerosol lithography. The multiscale features of the sophisticated 3DM structures exhibit surface plasmon resonances at multiple frequencies, which increase light scattering and absorption efficiency over a wide spectral range from 350-1100 nm. The multiple plasmon resonances, together with the antireflection functionality arising from the conformally deposited top surface of the 3D solar cell, lead to a 22% and an 11% improvement in power conversion efficiency of the nc-Si:H thin-film solar cells compared to flat cells and cells employing nanoparticle clusters, respectively. Finite-difference time-domain simulations were also carried out to confirm that the improved device performance mainly originates from the multiple plasmon resonances generated from three-dimensionally assembled nanoparticle structures.
RESUMO
High efficiency perovskite solar cells were fabricated reproducibly via Lewis base adduct of lead(II) iodide. PbI2 was dissolved in N,N-dimethyformamide with equimolar N,N-dimethyl sulfoxide (DMSO) and CH3NH3I. Stretching vibration of SâO appeared at 1045 cm(-1) for bare DMSO, which was shifted to 1020 and 1015 cm(-1) upon reacting DMSO with PbI2 and PbI2 + CH3NH3I, respectively, indicative of forming the adduct of PbI2·DMSO and CH3NH3I·PbI2·DMSO due to interaction between Lewis base DMSO and/or iodide (I(-)) and Lewis acid PbI2. Spin-coating of a DMF solution containing PbI2, CH3NH3I, and DMSO (1:1:1 mol %) formed a transparent adduct film, which was converted to a dark brown film upon heating at low temperature of 65 °C for 1 min due to removal of the volatile DMSO from the adduct. The adduct-induced CH3NH3PbI3 exhibited high charge extraction characteristics with hole mobility as high as 3.9 × 10(-3) cm(2)/(V s) and slow recombination rate. Average power conversion efficiency (PCE) of 18.3% was achieved from 41 cells and the best PCE of 19.7% was attained via adduct approach.
RESUMO
Infrared transmission measurements reveal the hybridization of graphene plasmons and the phonons in a monolayer hexagonal boron nitride (h-BN) sheet. Frequency-wavevector dispersion relations of the electromagnetically coupled graphene plasmon/h-BN phonon modes are derived from measurement of nanoresonators with widths varying from 30 to 300 nm. It is shown that the graphene plasmon mode is split into two distinct optical modes that display an anticrossing behavior near the energy of the h-BN optical phonon at 1370 cm(-1). We explain this behavior as a classical electromagnetic strong-coupling with the highly confined near fields of the graphene plasmons allowing for hybridization with the phonons of the atomically thin h-BN layer to create two clearly separated new surface-phonon-plasmon-polariton (SPPP) modes.
RESUMO
Since the discovery of carbon nanotubes (CNTs), scientists have performed extensive studies on nanotubes in the fields of materials science, physics, and electronic engineering. Because multiwalled CNTs (MWCNTs) are not homogeneous materials, and because it is not feasible to test every newly synthesized MWCNT, this study was aimed at investigating the physicochemical properties that primarily determine the cellular toxicity of MWCNTs. This study analyzed the relationship between cell viability and physicochemical characteristics following exposure to eight different MWCNTs. We generated eight different MWCNTs using various synthetic methods and post-treatments. From this analysis, we sought to identify the major physicochemical determinants that could predict the cellular toxicity of MWCNTs, regardless of the synthetic method and post-treatment conditions. Creation of binding sites on the tube walls by breaking C-C bonds played a pivotal role in increasing toxicity and was most clearly demonstrated by a Raman G peak shift and the ID/IG ratio. In addition, several factors were found to be strongly related to cellular toxicity: surface charge in the case of MWCNTs created by the chemical vapor deposition method and surface area and EPR intensity in the case of MWCNTs created by the arc discharge based method. The methods developed in this study could be applied to the prediction of the toxicity of newly synthesized MWCNTs.