Scaling up of dual-chamber microbial electrochemical systems - An appraisal using systems design approach.

Impetus to minimise the energy and carbon footprints of evolving wastewater resource recovery facilities has promoted the development of microbial electrochemical systems (MES) as an emerging energy-neutral and sustainable platform technology. Using separators in dual-chamber MES to isolate anodic and cathodic environments creates endless opportunities for its myriad applications. Nevertheless, the high internal resistance and the complex interdependencies among various system factors have challenged its scale-up. This critical review employed a systems approach to examine the complex interdependencies and practical issues surrounding the implementation and scalability of dual-chamber MES, where the anodic and cathodic reactions are mutually appraised to improve the overall system efficiency. The robustness and stability of anodic biofilms in large-volume MES is dependent on its inoculum source, antecedent history and enrichment strategies. The composition and anode-respiring activity of these biofilms are modulated by the anolyte composition, while their performance demands a delicate balance between the electrode size, macrostructure and the availability of substrates, buffers and nutrients when using real wastewater as anolyte. Additionally, the catholyte governed the reduction environment and associated energy consumption of MES with scalable electrocatalysts needed to enhance the sluggish reaction kinetics for energy-efficient resource recovery. A comprehensive assessment of the dual-chamber reactor configuration revealed that the tubular, spiral-wound, or plug-in modular MES configurations are suitable for pilot-scale, where it could be designed more effectively using efficient electrode macrostructure, suitable membranes and bespoke strategies for continuous operation to maximise their performance. It is anticipated that the critical and analytical understanding gained through this review will support the continuous development and scaling-up of dual-chamber MES for prospective energy-neutral treatment of wastewater and simultaneous circular management of highly relevant environmental resources.

Biochemical trade-offs and opportunities of commercialized microalgae cultivation under increasing carbon dioxide.

Microalgae's exceptional photosynthetic prowess, CO2 adaptation, and high-value bioproduct accumulation make them prime candidates for microorganism-based biorefineries. However, most microalgae research emphasizes downstream processes and applications rather than fundamental biomass and biochemical balances and kinetic under the influence of greenhouse gases such as CO2. Therefore, three distinctly different microalgae species were cultivated under 0% to 20% CO2 treatments to examine their biochemical responses, biomass production and metabolite accumulations. Using a machine learning approach, it was found that Chlorella sorokiniana showed a positive relationship between biomass and chl a, chl b, carotenoids, and carbohydrates under increasing CO2 treatments, while Chlamydomonas angulosa too displayed positive relationships between biomass and all studied biochemical contents, with minimal trade-offs. Meanwhile, Nostoc sp. exhibited a negative correlation between biomass and lipid contents under increasing CO2 treatment. The study showed the potential of Chlorella, Chlamydomonas and Nostoc for commercialization in biorefineries and carbon capture systems where their trade-offs were identified for different CO2 treatments and could be prioritized based on commercial objectives. This study highlighted the importance of understanding trade-offs between biomass production and biochemical yields for informed decision-making in microalgae cultivation, in the direction of mass carbon capture for climate change mitigation.

Urban stormwater harvesting and reuse: a probe into the chemical, toxicology and microbiological contaminants in water quality.

Stormwater is one of the last major untapped urban water resources that can be exploited as an alternative water source in Australia. The information in the current Australian Guidelines for Water Recycling relating to stormwater harvesting and reuse only emphasises on a limited number of stormwater quality parameters. In order to supply stormwater as a source for higher value end-uses, a more comprehensive assessment on the potential public health risks has to be undertaken. Owing to the stochastic variations in rainfall, catchment hydrology and also the types of non-point pollution sources that can provide contaminants relating to different anthropogenic activities and catchment land uses, the characterisation of public health risks in stormwater is complex, tedious and not always possible through the conventional detection and analytical methods. In this study, a holistic approach was undertaken to assess the potential public health risks in urban stormwater samples from a medium-density residential catchment. A combined chemical-toxicological assessment was used to characterise the potential health risks arising from chemical contaminants, while a combination of standard culture methods and quantitative polymerase chain reaction (qPCR) methods was used for detection and quantification of faecal indicator bacteria (FIB) and pathogens in urban stormwater. Results showed that the concentration of chemical contaminants and associated toxicity were relatively low when benchmarked against other alternative water sources such as recycled wastewater. However, the concentrations of heavy metals particularly cadmium and lead have exceeded the Australian guideline values, indicating potential public health risks. Also, high numbers of FIB were detected in urban stormwater samples obtained from wet weather events. In addition, qPCR detection of human-related pathogens suggested there are frequent sewage ingressions into the urban stormwater runoff during wet weather events. Further water quality monitoring study will be conducted at different contrasting urban catchments in order to undertake a more comprehensive public health risk assessment for urban stormwater.

Multistep, microvolume resin fractionation combined with 3D fluorescence spectroscopy for improved DOM characterization and water quality monitoring.

Conventionally, resin fractionation (RF) method has been widely used to characterize dissolved organic matter (DOM) found in different source waters based on general and broad DOM fractions grouping. In this study, a new refined method using multistep, microvolume resin fractionation combined with excitation emission matrix fluorescence spectroscopy (MSM-RF-EEMS) was developed for further isolation and characterization of subfractions within the primary DOM fractions separated from using the conventional RF method. Subsequently, its feasibility in indicating the occurrence of urban pollution in source waters was also assessed. Results from using the new MSM-RF-EEMS method strongly illustrated that several organic subfractions still exist within the regarded primary pure hydrophobic acid (HoA) fraction including the humic- and fulvic-like organic matters, tryptophan- and tyrosine-like proteins. It was found that by using the MSM-RF-EEMS method, the organic subfractions present within the primary DOM fraction could be easily identified and characterized. Further validation on the HoA fraction using the MSM-RF-EEMS method revealed that the constant association of EEM peak T1 (tryptophan) fraction could specifically be used to indicate the occurrence of urban pollution in source water. The correlation analysis on the presence of EEM peak T2 (tyrosine) fraction could be used as a supplementary proof to further verify the presence of urban pollution in source waters. These findings on using the presence of EEM peaks T1 and T2 within the primary HoA fraction would be significant and useful for developing a sensory device for online water quality monitoring.

Data-driven and validated dimensional analysis for rational scale-up of a dual-chamber microbial fuel cell system for water-energy nexus exploitation.

Mathematical modelling of microbial fuel cells (MFC) facilitates their scale-up by maintaining dimensionless parameters across reactor volumes for consistent performance. This study developed data-driven correlations to predict areal power density for a batch-fed dual-chamber MFC using hybridised first-principle mechanistic model and Buckingham's Pi theorem. The established correlations were validated using experimentally-derived data for pre-enriched electroactive biofilm from mixed cultures. The biochemical model parameters are infilled with stoichiometric and thermodynamics estimations. Results showed that the correlations using logistic kinetics (Nash-Sutcliffe Efficiency, NSE = 0.59) outperformed Monod kinetics (NSE = 0.52) as the latter was not suitable for representing the first-order biochemical kinetics under limited substrate conditions. Sensitivity analysis on varying pH and bicarbonate concentration improved model predictions by ± 50%, though relative absolute error was ± 20% due to inherent error of estimated biochemical parameters. The application of hybridised approach for modelling MFC provides renewed perspectives for their rational design and scale-up applications.

Catalysing electrowinning of copper from E-waste: A critical review.

Smart technologies and digitalisation have increased the consumption of scarce metals that threaten the sustainability of intricated industries. Additionally, the growing streams of waste electrical and electronic equipment (e-waste) are significant hazards to public health and the environment. Thus, there is an escalating need to recover metals from e-waste for sustainable management of metal resources. Hydrometallurgical processing of e-waste, involving copper (Cu) leaching and its subsequent recovery from pregnant leach solution (PLS) via electrowinning, has emerged as an efficient strategy to close the recycling loop. Electrowinning from PLS demonstrated higher Cu recovery efficiency and operational feasibility with a lower reagent use and lesser waste generation. Nevertheless, multiple issues challenged its practical implementation, including selective recovery of Cu from PLS containing mixed metals and high energy consumption. This review (1) identifies the factors affecting Cu electrowinning from PLS; (2) evaluates the composition of lixiviants influencing Cu electrowinning; (3) appraises various catalysts developed for enhancing Cu electrodeposition; and (4) reviews coupled systems that minimised process energy consumption. From the literature review, electrocatalysts are prospective candidates for improving Cu electrowinning as they reduced the cathodic reduction overpotentials, enhanced surface reaction kinetics and increased current efficiency. Other catalysts, including bioelectrocatalysts and photoelectrocatalysts, are applicable for dilute electrolytes with further investigations required to validate their feasibility. The coupled systems, including slurry electrolysis, bioelectrochemical systems and coupled redox fuel cells, minimise process energy requirements by systematically coupling the cathodic reduction reaction with suitable anodic oxidation reactions having thermodynamically low overpotentials. Among these systems, slurry electrolysis utilising a single-step processing of e-waste is feasible for commericalisation though operational challenges must be addressed to improve its sustainability. The other systems require further studies to improve their scalability. It provides an important direction for energy-efficient Cu electrowinning from PLS, ultimately promoting a circular economy for the scarce metal resources.

Distinctive correlations between cell concentration and cell size to microalgae biomass under increasing carbon dioxide.

Carbon capture and storage (CCS) via microalgae cultivations is getting renewed interest as climate change mitigation effort, owing to its excellent photosynthetic and CO2 fixation capability. Microalgae growth is monitored based on their biomass, cell concentrations and cell sizes. The key parametric relationships on microalgae growth under CO2 are absent in previous studies and this inadequacy hampers the design and scale-up of microalgae-based CCS. In this study, three representative microalgae species, Chlorella, Nostoc and Chlamydomonas, were investigated for establishing key correlations of cell concentrations and sizes towards their biomass fluctuations under CO2 influences of 0% to 20% volume ratios (v/v). This revealed that Chlorella and Chlamydomonas cell concentrations significantly contributed towards increasing biomass concentration under CO2 elevations. Chlorella and Nostoc cell sizes were enhanced at 20% (v/v). These findings provided new perspectives on growth responses under increasing CO2 treatment, opening new avenues on CCS schemes engineering designs and biochemical production.

Alkaline earth atom doping-induced changes in the electronic and magnetic properties of graphene: a density functional theory study.

Density functional theory was used to investigate the effects of doping alkaline earth metal atoms (beryllium, magnesium, calcium and strontium) on graphene. Electron transfer from the dopant atom to the graphene substrate was observed and was further probed by a combined electron localization function/non-covalent interaction (ELF/NCI) approach. This approach demonstrates that predominantly ionic bonding occurs between the alkaline earth dopants and the substrate, with beryllium doping having a variant characteristic as a consequence of electronegativity equalization attributed to its lower atomic number relative to carbon. The ionic bonding induces spin-polarized electronic structures and lower workfunctions for Mg-, Ca-, and Sr-doped graphene systems as compared to the pristine graphene. However, due to its variant bonding characteristic, Be-doped graphene exhibits non-spin-polarized p-type semiconductor behavior, which is consistent with previous works, and an increase in workfunction relative to pristine graphene. Dirac half-metal-like behavior was predicted for magnesium doped graphene while calcium doped and strontium doped graphene were predicted to have bipolar magnetic semiconductor behavior. These changes in the electronic and magnetic properties of alkaline earth doped graphene may be of importance for spintronic and other electronic device applications.

Multi-dimensional zinc oxide (ZnO) nanoarchitectures as efficient photocatalysts: What is the fundamental factor that determines photoactivity in ZnO?

While bulk zinc oxide (ZnO) is of non-toxic in nature, ZnO nanoarchitectures could potentially induce the macroscopic characteristics of oxidative, lethality and toxicity in the water environment. Here we report a systematic study through state-of-the-art controllable synthesis of multi-dimensional ZnO nanoarchitectures (i.e. 0D-nanoparticle, 1D-nanorod, 2D-nanosheet, and 3D-nanoflowers), and subsequent in-depth understanding on the fundamental factor that determines their photoactivities. The photoactivities of resultant ZnO nanoarchitectures were interpreted in terms of the photodegradation of salicylic acid as well as inactivation of Bacillus subtilis and Escherichia coli under UV-A irradiation. Photodegradation results showed that 1D-ZnO nanorods demonstrated the highest salicylic acid photodegradation efficiency (99.4%) with a rate constant of 0.0364 min-1. 1D-ZnO nanorods also exhibited the highest log reductions of B. subtilis and E. coli of 3.5 and 4.2, respectively. Through physicochemical properties standardisation, an intermittent higher k value for pore diameter (0.00097 min-1 per mm), the highest k values for crystallite size (0.00171 min-1 per nm) and specific surface area (0.00339 min-1 per m2/g) contributed to the exceptional photodegradation performance of nanorods. Whereas, the average normalised log reduction against the physicochemical properties of nanorods (i.e. low crystallite size, high specific surface area and pore diameter) caused the strongest bactericidal effect.

Impacts of morphological-controlled ZnO nanoarchitectures on aerobic microbial communities during real wastewater treatment in an aerobic-photocatalytic system.

This study aimed to evaluate the impacts of morphological-controlled ZnO nanoarchitectures on aerobic microbial communities during real wastewater treatment in an aerobic-photocatalytic system. Results showed that the antibacterial properties of ZnO nanoarchitectures were significantly more overwhelming than their photocatalytic properties. The inhibition of microbial activities in activated sludge by ZnO nanoarchitectures entailed an adverse effect on wastewater treatment efficiency. Subsequently, the 16S sequencing analysis were conducted to examine the impacts of ZnO nanoarchitectures on aerobic microbial communities, and found the significantly lower microbial diversity and species richness in activated sludge treated with 1D-ZnO nanorods as compared to other ZnO nanoarchitectures. Additionally, 1D-ZnO nanorods reduced the highest proportion of Proteobacteria phylum in activated sludge due to its higher proportion of active polar surfaces that facilitates Zn2+ ions dissolution. Pearson correlation coefficients showed that the experimental data obtained from COD removal efficiency and bacterial log reduction were statistically significant (p-value < 0.05), and presented a positive correlation with the concentration of Zn2+ ions. Finally, a non-parametric analysis of Friedman test and post-hoc analysis confirmed that the concentration of Zn2+ ions being released from ZnO nanoarchitectures is the main contributing factor for both the reduction in COD removal efficiency and bacterial log reduction.

E-waste in the international context - A review of trade flows, regulations, hazards, waste management strategies and technologies for value recovery.

E-waste, or waste generated from electrical and electronic equipment, is considered as one of the fastest-growing waste categories, growing at a rate of 3-5% per year in the world. In 2016, 44.7 million tonnes of e-waste were generated in the world, which is equivalent to 6.1 kg for each person. E-waste is classified as a hazardous waste, but unlike other categories, e-waste also has significant potential for value recovery. As a result it is traded significantly between the developed and developing world, both as waste for disposal and as a resource for metal recovery. Only 20% of global e-waste in 2016 was properly recycled or disposed of, with the fate of the remaining 80% undocumented - likely to be dumped, traded or recycled under inferior conditions. This review paper provides an overview of the global e-waste resource and identifies the major challenges in the sector in terms of generation, global trade and waste management strategies. It lists the specific hazards associated with this type of waste that need to be taken into account in its management and includes a detailed overview of technologies employed or proposed for the recovery of value from e-waste. On the basis of this overview the paper identifies future directions for effective e-waste processing towards sustainable waste/resource management. It becomes clear that there is a strong divide between developed and developing countries with regard to this sector. While value recovery is practiced in centralised facilities employing advanced technologies in a highly regulated industrial environment in the developed world, in the developing world such recovery is practiced in a largely unregulated artisanal industry employing simplistic, labour intensive and environmentally hazardous approaches. Thus value is generated safely in the hi-tech environment of the developed world, whereas environmental burdens associated with exported waste and residual waste from simplistic processing remain largely in developing countries. It is argued that given the breadth of available technologies, a more systematic evaluation of the entire e-waste value chain needs to be conducted with a view to establishing integrated management of this resource (in terms of well-regulated value recovery and final residue disposal) at the appropriately local rather than global scale.

Nanostructured tungsten trioxide thin films synthesized for photoelectrocatalytic water oxidation: a review.

The recent developments of nanostructured WO3 thin films synthesized through the electrochemical route of electrochemical anodization and cathodic electrodeposition for the application in photoelectrochemical (PEC) water splitting are reviewed. The key fundamental reaction mechanisms of electrochemical anodization and cathodic electrodeposition methods for synthesizing nanostructured WO3 thin films are explained. In addition, the effects of metal oxide precursors, electrode substrates, applied potentials and current densities, and annealing temperatures on size, composition, and thickness of the electrochemically synthesized nanostructured WO3 thin films are elucidated in detail. Finally, a summary is given for the general evaluation practices used to calculate the energy conversion efficiency of nanostructured WO3 thin films and a recommendation is provided to standardize the presentation of research results in the field to allow for easy comparison of reported PEC efficiencies in the near future.

Photocatalytic treatment of high concentration carbamazepine in synthetic hospital wastewater.

Effective and sustainable treatment of hospital wastewater containing high concentration of pharmaceutical compounds presents a pivotal challenge to wastewater and environmental engineers worldwide. In this study, a titanium dioxide (TiO(2)) nanofiber based wastewater treatment process was assessed as a pre-treatment system to treat and enhance the biodegradability of a representative pharmaceutical compound, 5000 µg/L of carbamazepine (CBZ), in synthetic hospital wastewater. Results showed that the stand-alone TiO(2) pre-treatment system was capable of removing 78% of CBZ, 40% of COD and 23% of PO(4) concentrations from the influent wastewater within a 4h reaction time. High performance size exclusion chromatography demonstrated that a simultaneous biodegradability enhancement of hospital wastewater was observed, whereby an apparent shift in molecular weight from higher fraction (>10-1000 kDa) to a lower fraction (<10 kDa) was induced after 0.5h of photocatalytic treatment. Eventually, it was found that the photodegradation profile for high concentration CBZ in synthetic hospital wastewater was perfectly fitted to the Langmuir-Hinshelwood kinetics model. It is anticipated that this TiO(2) pre-treatment process can be further integrated with a biological wastewater treatment process to deliver treated hospital effluent of better quality that can minimise the associated human health and environmental risks.

Recent developments in photocatalytic water treatment technology: a review.

In recent years, semiconductor photocatalytic process has shown a great potential as a low-cost, environmental friendly and sustainable treatment technology to align with the "zero" waste scheme in the water/wastewater industry. The ability of this advanced oxidation technology has been widely demonstrated to remove persistent organic compounds and microorganisms in water. At present, the main technical barriers that impede its commercialisation remained on the post-recovery of the catalyst particles after water treatment. This paper reviews the recent R&D progresses of engineered-photocatalysts, photoreactor systems, and the process optimizations and modellings of the photooxidation processes for water treatment. A number of potential and commercial photocatalytic reactor configurations are discussed, in particular the photocatalytic membrane reactors. The effects of key photoreactor operation parameters and water quality on the photo-process performances in terms of the mineralization and disinfection are assessed. For the first time, we describe how to utilize a multi-variables optimization approach to determine the optimum operation parameters so as to enhance process performance and photooxidation efficiency. Both photomineralization and photo-disinfection kinetics and their modellings associated with the photocatalytic water treatment process are detailed. A brief discussion on the life cycle assessment for retrofitting the photocatalytic technology as an alternative waste treatment process is presented. This paper will deliver a scientific and technical overview and useful information to scientists and engineers who work in this field.