Regulation of anion-Na+ coordination chemistry in electrolyte solvates for low-temperature sodium-ion batteries.

High-performance sodium storage at low temperature is urgent with the increasingly stringent demand for energy storage systems. However, the aggravated capacity loss is induced by the sluggish interfacial kinetics, which originates from the interfacial Na+ desolvation. Herein, all-fluorinated anions with ultrahigh electron donicity, trifluoroacetate (TFA-), are introduced into the diglyme (G2)-based electrolyte for the anion-reinforced solvates in a wide temperature range. The unique solvation structure with TFA- anions and decreased G2 molecules occupying the inner sheath accelerates desolvation of Na+ to exhibit decreased desolvation energy from 4.16 to 3.49 kJ mol-1 and 24.74 to 16.55 kJ mol-1 beyond and below -20 °C, respectively, compared with that in 1.0 M NaPF6-G2. These enable the cell of Na||Na3V2(PO4)3 to deliver 60.2% of its room-temperature capacity and high capacity retention of 99.2% after 100 cycles at -40 °C. This work highlights regulation of solvation chemistry for highly stable sodium-ion batteries at low temperature.

Routes to high-performance layered oxide cathodes for sodium-ion batteries.

Sodium-ion batteries (SIBs) are experiencing a large-scale renaissance to supplement or replace expensive lithium-ion batteries (LIBs) and low energy density lead-acid batteries in electrical energy storage systems and other applications. In this case, layered oxide materials have become one of the most popular cathode candidates for SIBs because of their low cost and comparatively facile synthesis method. However, the intrinsic shortcomings of layered oxide cathodes, which severely limit their commercialization process, urgently need to be addressed. In this review, inherent challenges associated with layered oxide cathodes for SIBs, such as their irreversible multiphase transition, poor air stability, and low energy density, are systematically summarized and discussed, together with strategies to overcome these dilemmas through bulk phase modulation, surface/interface modification, functional structure manipulation, and cationic and anionic redox optimization. Emphasis is placed on investigating variations in the chemical composition and structural configuration of layered oxide cathodes and how they affect the electrochemical behavior of the cathodes to illustrate how these issues can be addressed. The summary of failure mechanisms and corresponding modification strategies of layered oxide cathodes presented herein provides a valuable reference for scientific and practical issues related to the development of SIBs.

Pre-Oxidation Strategy Transforming Waste Foam to Hard Carbon Anodes for Boosting Sodium Storage Performance.

Large reserves, high capacity, and low cost are the core competitiveness of disordered carbon materials as excellent anode materials for sodium-ion batteries (SIBs). And the existence and improper treatment of a large number of organic solid wastes will aggravate the burden on the environment, therefore, it is significant to transform wastes into carbon-based materials for sustainable energy utilization. Herein, a kind of hard carbon materials are reported with waste biomass-foam as the precursor, which can improve the sodium storage performance through pre-oxidation strategy. The introduction of oxygen-containing groups can promote structural cross-linking, and inhibit the melting and rearrangement of carbon structure during high-temperature carbonization that produces a disordered structure with a suitable degree of graphitization. Moreover, the micropore structure are also regulated during the high-temperature carbonization process, which is conducive to the storage of sodium ions in the low-voltage plateau region. The optimized sample as an electrode material exhibits excellent reversible specific capacity (308.0 mAh g-1) and initial Coulombic efficiency (ICE, 90.1%). In addition, a full cell with the waste foam-derived hard carbon anode and a Na3V2(PO4)3 cathode is constructed with high ICE and energy density. This work provides an effective strategy to conversion the waste to high-value hard carbon anode for sodium-ion batteries.

An Intrinsic Stable Layered Oxide Cathode for Practical Sodium-Ion Battery: Solid Solution Reaction, Near-Zero-Strain and Marvelous Water Stability.

Non-aqueous solvents, in particular N,N-dimethylaniline (NMP), are widely applied for electrode fabrication since most sodium layered oxide cathode materials are readily damaged by water molecules. However, the expensive price and poisonousness of NMP unquestionably increase the cost of preparation and post-processing. Therefore, developing an intrinsically stable cathode material that can implement the water-soluble binder to fabricate an electrode is urgent. Herein, a stable nanosheet-like Mn-based cathode material is synthesized as a prototype to verify its practical applicability in sodium-ion batteries (SIBs). The as-prepared material displays excellent electrochemical performance and remarkable water stability, and it still maintains a satisfactory performance of 79.6% capacity retention after 500 cycles even after water treatment. The in situ X-ray diffraction (XRD) demonstrates that the synthesized material shows an absolute solid-solution reaction mechanism and near-zero-strain. Moreover, the electrochemical performance of the electrode fabricated with a water-soluble binder shows excellent long-cycling stability (67.9% capacity retention after 500 cycles). This work may offer new insights into the rational design of marvelous water stability cathode materials for practical SIBs.

Phosphorous and Nitrogen Dual-Doped Carbon as a Highly Efficient Electrocatalyst for Sodium-Oxygen Batteries.

Sodium-oxygen batteries have been regarded as promising energy storage devices due to their low overpotential and high energy density. Its applications, however, still face formidable challenges due to the lack of understanding about the influence of electrocatalysts on the discharge products. Here, a phosphorous and nitrogen dual-doped carbon (PNDC) based cathode is synthesized to increase the electrocatalytic activity and to stabilize the NaO2 superoxide nanoparticle discharge products, leading to enhanced cycling stability when compared to the nitrogen-doped carbon (NDC). The PNDC air cathode exhibits a low overpotential (0.36 V) and long cycling stability (120 cycles). The reversible formation/decomposition and stabilization of the NaO2 discharge products are clearly proven by in-situ synchrotron X-ray diffraction and ex-situ X-ray diffraction. Based on the density functional theory calculation, the PNDC has much stronger adsorption (-2.85 eV) for NaO2 than that of NDC (-1.80 eV), which could efficiently stabilize the NaO2 discharge products.

Interfacial Engineering for Oriented Crystal Growth toward Dendrite-Free Zn Anode for Aqueous Zinc Metal Battery.

Zn deposition with a surface-preferred (002) crystal plane has attracted extensive attention due to its inhibited dendrite growth and side reactions. However, the nucleation and growth of the Zn(002) crystal plane are closely related to the interfacial properties. Herein, oriented growth of Zn(002) crystal plane is realized on Ag-modified surface that is directly visualized by in situ atomic force microscopy. A solid solution HCP-Zn (~1.10 at. % solubility of Ag, 30 °C) is formed on the Ag coated Zn foil (Zn@Ag) and possesses the same crystal structure as Zn to reduce its nucleation barrier caused by their lattice mismatch. It merits oriented Zn deposition and corrosion-resistant surface, and presents long cycling stability in symmetric cells and full cells coupled with V2O5 cathode. This work provides insights into interfacial regulation of Zn anodes for high-performance aqueous zinc metal batteries.

Insight into the Role of Fluoroethylene Carbonate on the Stability of Sb||Graphite Dual-Ion Batteries in Propylene Carbonate-Based Electrolyte.

Sodium dual-ion batteries (Na-DIBs) have attracted increasing attention due to their high operative voltages and low-cost raw materials. However, the practical applications of Na-DIBs are still hindered by the issues, such as low capacity and poor Coulombic efficiency, which is highly correlated with the compatibility between electrode and electrolyte but rarely investigated. Herein, fluoroethylene carbonate (FEC) is introduced into the electrolyte to regulate cation/anion solvation structure and the stability of cathode/anode-electrolyte interphase of Na-DIBs. The FEC modulates the environment of PF6 - solvation sheath and facilitates the interaction of PF6 - on graphite. In addition, the NaF-rich interphase caused by the preferential decomposition of FEC effectively inhibits side reactions and pulverization of anodes with the electrolyte. Consequently, Sb||graphite full cells in FEC-containing electrolyte achieve an improved capacity, cycling stability and Coulombic efficiency. This work elucidates the underlying mechanism of bifunctional FEC and provides an alternative strategy of building high-performance dual ion batteries.

Entropy-Assisted Anion-Reinforced Solvation Structure for Fast-Charging Sodium-Ion Full Batteries.

Anion-reinforced solvation structure favors the formation of inorganic-rich robust electrode-electrolyte interface, which endows fast ion transport and high strength modulus to enable improved electrochemical performance. However, such a unique solvation structure inevitably injures the ionic conductivity of electrolytes and limits the fast-charging performance. Herein, a trade-off in tuning anion-reinforced solvation structure and high ionic conductivity is realized by the entropy-assisted hybrid ester-ether electrolyte. Anion-reinforced solvation sheath with more anions occupying the inner Na+ shell is constructed by introducing the weakly coordinated ether tetrahydrofuran into the commonly used ester-based electrolyte, which merits the accelerated desolvation energy and gradient inorganic-rich electrode-electrolyte interface. The improved ionic conductivity is attributed to the weakly diverse solvation structures induced by entropy effect. These enable the enhanced rate performance and cycling stability of Prussian blue||hard carbon full cells with high electrode mass loading. More importantly, the practical application of the designed electrolyte was further demonstrated by industry-level 18650 cylindrical cells.

Resolving the Origins of Superior Cycling Performance of Antimony Anode in Sodium-ion Batteries: A Comparison with Lithium-ion Batteries.

Alloying-type antimony (Sb) with high theoretical capacity is a promising anode candidate for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Given the larger radius of Na+ (1.02 Å) than Li+ (0.76 Å), it was generally believed that the Sb anode would experience even worse capacity degradation in SIBs due to more substantial volumetric variations during cycling when compared to LIBs. However, the Sb anode in SIBs unexpectedly exhibited both better electrochemical and structural stability than in LIBs, and the mechanistic reasons that underlie this performance discrepancy remain undiscovered. Here, using substantial in situ transmission electron microscopy, X-ray diffraction, and Raman techniques complemented by theoretical simulations, we explicitly reveal that compared to the lithiation/delithiation process, sodiation/desodiation process of Sb anode displays a previously unexplored two-stage alloying/dealloying mechanism with polycrystalline and amorphous phases as the intermediates featuring improved resilience to mechanical damage, contributing to superior cycling stability in SIBs. Additionally, the better mechanical properties and weaker atomic interaction of Na-Sb alloys than Li-Sb alloys favor enabling mitigated mechanical stress, accounting for enhanced structural stability as unveiled by theoretical simulations. Our finding delineates the mechanistic origins of enhanced cycling stability of Sb anode in SIBs with potential implications for other large-volume-change electrode materials.

Sulfur-Rich Additive-Induced Interphases Enable Highly Stable 4.6†V LiNi0.5 Co0.2 Mn0.3 O2 ||graphite Pouch Cells.

High-voltage lithium-ion batteries (LIBs) have attracted great attention due to their promising high energy density. However, severe capacity degradation is witnessed, which originated from the incompatible and unstable electrolyte-electrode interphase at high voltage. Herein, a robust additive-induced sulfur-rich interphase is constructed by introducing an additive with ultrahigh S-content (34.04 %, methylene methyl disulfonate, MMDS) in 4.6 V LiNi0.5 Co0.2 Mn0.3 O2 (NCM523)||graphite pouch cell. The MMDS does not directly participate the inner Li+ sheath, but the strong interactions between MMDS and PF6 - anions promote the preferential decomposition of MMDS and broaden the oxidation stability, facilitating the formation of an ultrathin but robust sulfur-rich interfacial layer. The electrolyte consumption, gas production, phase transformation and dissolution of transition metal ions were effectively inhibited. As expected, the 4.6 V NCM523||graphite pouch cell delivers a high capacity retention of 87.99 % even after 800 cycles. This work shares new insight into the sulfur-rich additive-induced electrolyte-electrode interphase for stable high-voltage LIBs.

Prussian Blue Analogues with Optimized Crystal Plane Orientation and Low Crystal Defects toward 450†Wh kg-1 Alkali-Ion Batteries.

Prussian blue analogues (PBAs) have been regarded as promising cathode materials for alkali-ion batteries owing to their high theoretical energy density and low cost. However, the high water and vacancy content of PBAs lower their energy density and bring safety issues, impeding their large-scale application. Herein, a facile "potassium-ions assisted" strategy is proposed to synthesize highly crystallized PBAs. By manipulating the dominant crystal plane and suppressing vacancies, the as-prepared PBAs exhibit increased redox potential resulting in high energy density up to ≈450 Wh kg-1 , which is at the same level of the well-known LiFePO4 cathodes for lithium-ion batteries. Remarkably, unconventional highly-reversible phase evolution and redox-active pairs were identified by multiple in situ techniques for the first time. The preferred guest-ion storage sites and migration mechanism were systematically analysed through theoretical calculations. We believe these results could inspire the design of safe with high energy density.

Key Factors for Binders to Enhance the Electrochemical Performance of Silicon Anodes through Molecular Design.

Silicon is considered the most promising candidate for anode material in lithium-ion batteries due to the high theoretical capacity. Unfortunately, the vast volume change and low electric conductivity have limited the application of silicon anodes. In the silicon anode system, the binders are essential for mechanical and conductive integrity. However, there are few reviews to comprehensively introduce binders from the perspective of factors affecting performance and modification methods, which are crucial to the development of binders. In this review, several key factors that have great impact on binders' performance are summarized, including molecular weight, interfacial bonding, and molecular structure. Moreover, some commonly used modification methods for binders are also provided to control these influencing factors and obtain the binders with better performance. Finally, to overcome the existing problems and challenges about binders, several possible development directions of binders are suggested.

Streamline Sulfur Redox Reactions to Achieve Efficient Room-Temperature Sodium-Sulfur Batteries.

It is vital to dynamically regulate S activity to achieve efficient and stable room-temperature sodium-sulfur (RT/Na-S) batteries. Herein, we report using cobalt sulfide as an electron reservoir to enhance the activity of sulfur cathodes, and simultaneously combining with cobalt single atoms as double-end binding sites for a stable S conversion process. The rationally constructed CoS2 electron reservoir enables the straight reduction of S to short-chain sodium polysulfides (Na2 S4 ) via a streamlined redox path through electron transfer. Meanwhile, cobalt single atoms synergistically work with the electron reservoir to reinforce the streamlined redox path, which immobilize in situ formed long-chain products and catalyze their conversion, thus realizing high S utilization and sustainable cycling stability. The as-developed sulfur cathodes exhibit a superior rate performance of 443 mAh g-1 at 5 A g-1 with a high cycling capacity retention of 80 % after 5000 cycles at 5 A g-1 .

Recent Progress on Layered Cathode Materials for Nonaqueous Rechargeable Magnesium Batteries.

Rechargeable magnesium batteries (RMBs) are promising candidates for next-generation energy storage systems owing to their high safety and the low cost of magnesium resources. One of the main challenges for RMBs is to develop suitable high-performance cathode materials. Layered materials are one of the most promising cathode materials for RMBs due to their relatively high specific capacity and facile synthesis process. This review focuses on recent progress on layered cathode materials for RMBs, including layered oxides, sulfides, selenides, and other layered materials. In addition, effective strategies to improve the electrochemical performance of layered cathode materials are summarized. Moreover, future perspectives about the application of layered materials in RMBs are also discussed. This review provides some significant guidance for the further development of layered materials for RMBs.

Carbonaceous Hosts for Sulfur Cathode in Alkali-Metal/S (Alkali Metal = Lithium, Sodium, Potassium) Batteries.

Alkali-metal/sulfur batteries hold great promise for offering relatively high energy density compared to conventional lithium-ion batteries. By providing viable sulfur composites that can be effectively used, carbonaceous hosts as a key component play critical roles in overcoming the preliminary challenges associated with the insulating sulfur and its relatively soluble polysulfides. Herein, a comprehensive overview and recent progress on carbonaceous hosts for advanced next-generation alkali-metal/sulfur batteries are presented. In order to encapsulate the highly active sulfur mass and fully limit polysulfide dissolution, strategies for tailoring the design and synthesis of carbonaceous hosts are summarized in this work. The sticking points that remain for sulfur cathodes in current alkali-metal/sulfur systems and the future remedies that can be provided by carbonaceous hosts are also indicated, which can lead to long cycling lifetimes and highly reversible capacities under repeated sulfur reduction reactions in alkali-metal/sulfur during cycling.

A Low-Strain Potassium-Rich Prussian Blue Analogue Cathode for High Power Potassium-Ion Batteries.

Most of the cathode materials for potassium ion batteries (PIBs) suffer from poor structural stability due to the large ionic radius of K+ , resulting in poor cycling stability. Here we report a low-strain potassium-rich K1.84 Ni[Fe(CN)6 ]0.88 ⋅0.49 H2 O (KNiHCF) as a cathode material for PIBs. The as-prepared KNiHCF cathode can deliver reversible discharge capacity of 62.8 mAh g-1 at 100 mA g-1 , with a high discharge voltage of 3.82 V. It can also achieve a superior rate performance of 45.8 mAh g-1 at 5000 mA g-1 , with a capacity retention of 88.6 % after 100 cycles. The superior performance of KNiHCF cathode results from low-strain de-/intercalation mechanism, intrinsic semiconductor property and low potassium diffusion energy barrier. The high power density and long-term stability of KNiHCF//graphite full cell confirmed the feasibility of K-rich KNiHCF cathode in PIBs. This work provides guidance to develop Prussian blue analogues as cathode materials for PIBs.

Epitaxial Nickel Ferrocyanide Stabilizes Jahn-Teller Distortions of Manganese Ferrocyanide for Sodium-Ion Batteries.

Manganese-based Prussian Blue, Na2-δ Mn[Fe(CN)6 ] (MnPB), is a good candidate for sodium-ion battery cathode materials due to its high capacity. However, it suffers from severe capacity decay during battery cycling due to the destabilizing Jahn-Teller distortions it undergoes as Mn2+ is oxidized to Mn3+ . Herein, the structure is stabilized by a thin epitaxial surface layer of nickel-based Prussian Blue (Na2-δ Ni[Fe(CN)6 ]). The one-pot synthesis relies on a chelating agent with an unequal affinity for Mn2+ and Ni2+ ions, which prevents Ni2+ from reacting until the Mn2+ is consumed. This is a new and simpler synthesis of core-shell materials, which usually needs several steps. The material has an electrochemical capacity of 93 mA h g-1 , of which it retains 96 % after 500 charge-discharge cycles (vs. 37 % for MnPB). Its rate capability is also remarkable: at 4 A g-1 (ca. 55 C) it can reversibly store 70 mA h g-1 , which is also reflected in its diffusion coefficient of ca. 10-8  cm2 s-1 . The epitaxial outer layer appears to exert an anisotropic strain on the inner layer, preventing the Jahn-Teller distortions it normally undergoes during de-sodiation.

Ultra-High Initial Coulombic Efficiency Induced by Interface Engineering Enables Rapid, Stable Sodium Storage.

High initial coulombic efficiency is highly desired because it implies effective interface construction and few electrolyte consumption, indicating enhanced batteries' life and power output. In this work, a high-capacity sodium storage material with FeS2 nanoclusters (≈1-2 nm) embedded in N, S-doped carbon matrix (FeS2 /N,S-C) was synthesized, the surface of which displays defects-repaired characteristic and detectable dot-matrix distributed Fe-N-C/Fe-S-C bonds. After the initial discharging process, the uniform ultra-thin NaF-rich (≈6.0 nm) solid electrolyte interphase was obtained, thereby achieving verifiable ultra-high initial coulombic efficiency (≈92 %). The defects-repaired surface provides perfect platform, and the catalysis of dot-matrix distributed Fe-N-C/Fe-S-C bonds to the rapid decomposing of NaSO3 CF3 and diethylene glycol dimethyl ether successfully accelerate the building of two-dimensional ultra-thin solid electrolyte interphase. DFT calculations further confirmed the catalysis mechanism. As a result, the constructed FeS2 /N,S-C provides high reversible capacity (749.6 mAh g-1 at 0.1 A g-1 ) and outstanding cycle stability (92.7 %, 10 000 cycles, 10.0 A g-1 ). Especially, at -15 °C, it also obtains a reversible capacity of 211.7 mAh g-1 at 10.0 A g-1 . Assembled pouch-type cell performs potential application. The insight in this work provides a bright way to interface design for performance improvement in batteries.

Fire-Retardant, Stable-Cycling and High-Safety Sodium Ion Battery.

The safety of energy storage equipment has always been a stumbling block to the development of battery, and sodium ion battery is no exception. However, as an ultimate solution, the use of non-flammable electrolyte is susceptible to the side effects, and its poor compatibility with electrode, causing failure of batteries. Here, we report a non-flammable electrolyte design to achieve high-performance sodium ion battery, which resolves the dilemma via regulating the solvation structure of electrolyte by hydrogen bonds and optimizing the electrode-electrolyte interphase. The reported non-flammable electrolyte allows stable charge-discharge cycling of both sodium vanadium phosphate@hard carbon and Prussian blue@hard carbon full pouch cell for more than 120 cycles with a capacity retention of >85 % and high cycling Coulombic efficiency (99.7 %).

Full Activation of Mn4+ /Mn3+ Redox in Na4 MnCr(PO4 )3 as a High-Voltage and High-Rate Cathode Material for Sodium-Ion Batteries.

Developing high-voltage cathode materials is critical for sodium-ion batteries to boost energy density. NASICON (Na super-ionic conductor)-structured Nax MnM(PO4 )3 materials (M represents transition metal) have drawn increasing attention due to their features of robust crystal framework, low cost, as well as high voltage based on Mn4+ /Mn3+ and Mn3+ /Mn2+ redox couples. However, full activation of Mn4+ /Mn3+ redox couple within NASICON framework is still a great challenge. Herein, a novel NASICON-type Na4 MnCr(PO4 )3 material with highly reversible Mn4+ /Mn3+ redox reaction is discovered. It proceeds a two-step reaction with voltage platforms centered at 4.15 and 3.52 V versus Na+ /Na, delivering a capacity of 108.4 mA h g-1 . The Na4 MnCr(PO4 )3 cathode also exhibits long durability over 500 cycles and impressive rate capability up to 10 C. The galvanostatic intermittent titration technique (GITT) test shows fast Na diffusivity which is further verified by density functional theory calculations. The high electrochemical activity derives from the 3D robust framework structure, fast kinetics, and pseudocapacitive contribution. The sodium storage mechanism of the Na4 MnCr(PO4 )3 cathode is deeply studied by ex situ X-ray diffraction (XRD) and ex situ X-ray photoelectron spectroscopy (XPS), revealing that both solid-solution and two-phase reactions are involved in the Na+ ions extraction/insertion process.