Mesoporous Amorphous Silicon: A Simple Synthesis of a High-Rate and Long-Life Anode Material for Lithium-Ion Batteries.

Amorphous Si (a-Si) shows potential advantages over crystalline Si (c-Si) in lithium-ion batteries, owing to its high lithiation potential and good tolerance to intrinsic strain/stress. Herein, porous a-Si has been synthesized by a simple process, without the uses of dangerous or expensive reagents, sophisticated equipment, and strong acids that potential cause environment risks. These porous a-Si particles exhibit excellent electrochemical performances, owing to their porous structure, amorphous nature, and surface modification. They deliver a capacity of 1025 mAh g-1 at 3 A g-1 after 700 cycles. Moreover, the reversible capacity after electrochemical activation, is quite stable throughout the cycling, resulting in a capacity retention about around 88 %. The direct comparison between a-Si and c-Si anodes clearly supports the advantages of a-Si in lithium-ion batteries.

Alkalized MXene/carbon nanotube composite for stable Na metal anodes.

Ti3C2 MXenes are emerging 2D materials and have attracted increasing attention in sodium metal anode fabrication because of their high conductivity, multifunctional groups and excellent mechanical performances. However, the severe self-restacking of Ti3C2 MXenes is not conducive to dispersing Na+ and limits the function of regulating sodium deposition. Herein, an alkalized MXene/carbon nanotube (CNT) composite (named A-M-C) is introduced to regulate Na deposition behavior, which consists of Na3Ti5O12 microspheres, Ti3C2 MXene nanosheets and CNTs. Ti3C2 MXene nanosheets with large interlayer spaces and "sodiophilic" functional groups can provide abundant active sites for uniform nucleation and deposition of Na. Plenty of nanosheets are grown on the surface of the microsphere, thereby reducing the local current density, which can guide initial Na nucleation and promote Na dendrite-free growth. Furthermore, CNTs increase the electrical conductivity of the composite and achieve fast Na+ transport, improving the cycling stability of Na metal batteries. As a result, at a capacity of 1 mA h cm-2, the A-M-C electrode achieves a high average coulombic efficiency (CE) of 99.9% after 300 cycles at 2 mA cm-2. The symmetric cells of A-M-C/Na provide a long cycling life of more than 1400 h at 1 mA cm-2 with a minimal overpotential of 19 mV at an areal capacity of 1 mA h cm-2. The A-M-C/Na//NVP@C full cell presents a high coulombic efficiency of 98% with 100 mA g-1 in the first cycle. The strategy in this work provides new insights into fabricating novel MXene-based anode materials for dendrite-free sodium deposition.

Modification of the Ni-Rich Layered Cathode Material by Hf Addition: Synergistic Microstructural Engineering and Surface Stabilization.

The rapid decline of the reversible capacity originating from microcracks and surface structural degradation during cycling is still a serious obstacle to the practical utilization of Ni-rich LiNixCoyAl1-x-yO2 (x ≥ 0.8) cathode materials. In this research, a feasible Hf-doping method is proposed to improve the electrochemical performance of LiNi0.9Co0.08Al0.02O2 (NCA90) through microstructural optimization and structural enhancement. The addition of Hf refines the primary particles of NCA90 and develops them into a short rod shape, making them densely arranged along the radial direction, which increases the secondary particle toughness and reduces their internal porosity. Moreover, Hf-doping stabilizes the layered structure and suppresses the side reactions through the introduction of robust Hf-O bonding. Multiple advantages of Hf-doping allowed significant improvement of the cycling stability of LiNi0.895Co0.08Al0.02Hf0.005O2 (NCA90-Hf0.5), with a reversible capacity retention rate of 95.3% after 100 cycles at 1 C, as compared with only 82.0% for the pristine NCA90. The proposed synergetic strategy combining microstructural engineering and crystal structure enhancement can effectively resolve the inherent capacity fading of Ni-rich layered cathodes, promoting their practical application for next-generation lithium-ion batteries.

In situ rearranged multifunctional lipid nanoparticles via synergistic potentiation for oral insulin delivery.

Oral administration of therapeutic peptides/proteins (TPPs) is confronted with multiple gastrointestinal (GI) barriers such as mucus and intestinal epithelium, and the first-pass metabolism in the liver is also responsible for low bioavailability. In situ rearranged multifunctional lipid nanoparticles (LNs) were developed to overcome these obstacles via synergistic potentiation for oral insulin delivery. After the reverse micelles of insulin (RMI) containing functional components were gavaged, LNs formed in situ under the hydration effect of GI fluid. The nearly electroneutral surface generated by the rearrangement of sodium deoxycholate (SDC) and chitosan (CS) on the reverse micelle core facilitated LNs (RMI@SDC@SB12-CS) to overcome mucus barrier and the sulfobetaine 12 (SB12) modification further promoted epithelial uptake of LNs. Subsequently, chylomicron-like particles formed by the lipid core in the intestinal epithelium were easily transported to the lymphatic circulation and then into the systemic circulation, thus avoiding hepatic first-pass metabolism. Eventually, RMI@SDC@SB12-CS achieved a high pharmacological bioavailability of 13.7% in diabetic rats. In conclusion, this study provides a versatile platform for enhanced oral insulin delivery.

Self-Assembly of a Linear-Dendritic Polymer Containing Cisplatin and Norcantharidin into Raspberry-like Multimicelle Clusters for the Efficient Chemotherapy of Liver Cancer.

Combination chemotherapy has been proved to be an effective strategy in the clinic, and nanoformulations have drawn much attention in the field of drug delivery. However, conventional nanocarriers suffer from shortcomings such as inefficient coloading and undesired molar ratios of the combined drugs, preleakage of cargos during systemic circulation, and lack of cancer-selective drug release. To achieve tumor-specific codelivery of cisplatin (CDDP) and norcantharidin (NCTD) for synergistic treatment of liver cancer, a novel linear-dendritic polymer, termed as G1(PPDC)x, was designed and synthesized, where a prodrug consisting of cisplatin (CDDP) and norcantharidin (NCTD) was conjugated to PEG2000 via ester bonds to fabricate linear polymer-drug conjugates, and the conjugates were subsequently grafted to the terminal hydroxyls of a dendritic polycarbonate core. Benefiting from the hydrogen bond interactions, G1(PPDC)x could spontaneously self-assemble into a unique type of raspberry-like multimicelle clusters in solution (G1(PPDC)x-PMs). G1(PPDC)x-PMs possessed an optimal synergistic ratio of CDDP and NCTD, without obvious premature release or disassembly in biological environments. Intriguingly, upon extravasation into the interstitial tumor tissues, G1(PPDC)x-PMs (132 nm in diameter) could disassemble and reassemble into smaller micelles (40 nm in diameter) in response to the mildly acidic tumor microenvironment, which would enhance the deep tumor penetration and cellular accumulation of drugs. In vivo delivery of G1(PPDC)x-PMs led to a significantly prolonged blood circulation half-life, which is beneficial to achieve sufficient tumor accumulation through the enhanced permeability and retention (EPR) effect. G1(PPDC)x-PMs displayed the best antitumor activity in H22 tumor-bearing mice with a tumor inhibition rate of 78.87%. Meanwhile, G1(PPDC)x-PMs alleviated both myelosuppression toxicities of CDDP and vascular irritation of NCTD. Our results demonstrated that G1(PPDC)x-PMs could serve as an effective drug delivery system for codelivery of CDDP and NCTD to treat liver cancer efficiently.

Biphase-Interface Enhanced Sodium Storage and Accelerated Charge Transfer: Flower-Like Anatase/Bronze TiO2/C as an Advanced Anode Material for Na-Ion Batteries.

Flower-like assembly of ultrathin nanosheets composed of anatase and bronze TiO2 embedded in carbon is successfully synthesized by a simple solvothermal reaction, followed with a high-temperature annealing. As an anode material in sodium-ion batteries, this composite exhibits outstanding electrochemical performances. It delivers a reversible capacity of 120 mA h g-1 over 6000 cycles at 10 C. Even at 100 C, there is still a capacity of 104 mA h g-1. Besides carbon matrix and hierarchical structure, abundant interfaces between anatase and bronze greatly enhance the performance by offering additional sites for reversible Na+ storage and improving the charge-transfer kinetics. The interface enhancements are confirmed by discharge/charge profiles, rate performances, electrochemical impedance spectra, and first-principle calculations. These results offer a new pathway to upgrade the performances of anode materials in sodium-ion batteries.