RESUMO
Advancements in many modern technologies rely on the continuous need for materials discovery. However, the design of synthesis routes leading to new and targeted solid-state materials requires understanding of reactivity patterns1-3. Advances in synthesis science are necessary to increase efficiency and accelerate materials discovery4-10. We present a highly effective methodology for the rational discovery of materials using high-temperature solutions or fluxes having tunable solubility. This methodology facilitates product selection by projecting the free-energy landscape into real synthetic variables: temperature and flux ratio. We demonstrate the effectiveness of this technique by synthesizing compounds in the chalcogenide system of A(Ba)-Cu-Q(O) (Q = S or Se; A = Na, K or Rb) using mixed AOH/AX (A = Li, Na, K or Rb; X = Cl or I) fluxes. We present 30 unreported compounds or compositions, including more than ten unique structural types, by systematically varying the temperature and flux ratios without requiring changing the proportions of starting materials. Also, we found that the structural dimensionality of the compounds decreases with increasing reactant solubility and temperature. This methodology serves as an effective general strategy for the rational discovery of inorganic solids.
RESUMO
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMO
Highly efficient neutron detectors are critical in many sectors, including national security1,2, medicine3, crystallography4 and astronomy5. The main neutron detection technologies currently used involve 3He-gas-filled proportional counters6 and light scintillators7 for thermalized neutrons. Semiconductors could provide the next generation of neutron detectors because their advantages could make them competitive with or superior to existing detectors. In particular, solids with a high concentration of high-neutron-capture nuclides (such as 6Li, 10B) could be used to develop smaller detectors with high intrinsic efficiencies. However, no promising materials have been reported so far for the construction of direct-conversion semiconductor detectors. Here we report on the semiconductor LiInP2Se6 and demonstrate its potential as a candidate material for the direct detection of thermal neutrons at room temperature. This compound has a good thermal-neutron-capture cross-section, a suitable bandgap (2.06 electronvolts) and a favourable electronic band structure for efficient electron charge transport. We used α particles from an 241Am source as a proxy for the neutron-capture reaction and determined that the compact two-dimensional (2D) LiInP2Se6 detectors resolved the full-energy peak with an energy resolution of 13.9 per cent. Direct neutron detection from a moderated Pu-Be source was achieved using 6Li-enriched (95 per cent) LiInP2Se6 detectors with full-peak resolution. We anticipate that these results will spark interest in this field and enable the replacement of 3He counters by semiconductor-based neutron detectors.
RESUMO
The coexistence of superconductivity and ferromagnetism is an intrinsically interesting research focus in condensed matter physics, but the study is limited by low superconducting (Tc) and magnetic (Tm) transition temperatures in related materials. Here, we used a scanning superconducting quantum interference device to image the in situ diamagnetic and ferromagnetic responses of RbEuFe4As4 with high Tc and Tm. We observed significant suppression of the superfluid density in the vicinity of the magnetic phase transition, signifying fluctuation-enhanced magnetic scatterings between Eu spins and Fe 3d conduction electrons. Intriguingly, we observed multiple ferromagnetic domains that should be absent in an ideal magnetic helical phase. The formation of these domains demonstrates a weak c-axis ferromagnetic component probably arising from the Eu spin-canting effect, indicative of possible superconductivity-driven domain Meissner and domain vortex-antivortex phases, as revealed in EuFe2(As0.79P0.21)2. Our observations highlight that RbEuFe4As4 is a unique system that includes multiple interplay channels between superconductivity and ferromagnetism.
RESUMO
Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid-state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two-dimensional Sr(Ag1-x Lix )2 Se2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag1-x Lix )2 Se2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr3 Se2 ][(Ag1-x Lix )2 Se2 ] was synthesized upon further reaction of Sr(Ag1-x Lix )2 Se2 with SrSe. Both Sr(Ag1-x Lix )2 Se2 and [Sr3 Se2 ][(Ag1-x Lix )2 Se2 ] exhibit a direct band gap, which increases with increasing Li substitution (x). Therefore, the band gap of Sr(Ag1-x Lix )2 Se2 can be precisely tuned via fine-tuning x that is controlled by only the flux ratio and temperature.
RESUMO
Superionic conductors possess liquid-like ionic diffusivity in the solid state, finding wide applicability from electrolytes in energy storage to materials for thermoelectric energy conversion. Type I superionic conductors (for example, AgI, Ag2Se and so on) are defined by a first-order transition to the superionic state and have so far been found exclusively in three-dimensional crystal structures. Here, we reveal a two-dimensional type I superionic conductor, α-KAg3Se2, by scattering techniques and complementary simulations. Quasi-elastic neutron scattering and ab initio molecular dynamics simulations confirm that the superionic Ag+ ions are confined to subnanometre sheets, with the simulated local structure validated by experimental X-ray powder pair-distribution-function analysis. Finally, we demonstrate that the phase transition temperature can be controlled by chemical substitution of the alkali metal ions that compose the immobile charge-balancing layers. Our work thus extends the known classes of superionic conductors and will facilitate the design of new materials with tailored ionic conductivities and phase transitions.
RESUMO
The metal thiophosphates (MTP), M2P2S6, are a versatile class of van der Waals materials, which are notable for the possibility of tuning their magnetic properties with the incorporation of different transition-metal cations. Further, they also offer opportunities to probe the independent and synergistic role of the magnetically active cation sublattice when coupled to P2Q6 polyhedra. Herein, we report the structural, magnetic, and electronic properties of the series of MTPs, MnxCo2-xP2S6 (x = 0.25, 0.5, 1, 1.5, 1.75) synthesized by the P2S5 flux method. Structural and elemental analysis indicates a homogeneous stoichiometry in the MnxCo2-xP2S6 compounds. We observe that a correlation is apparent between the intensities of specific Raman modes and Raman shifts with respect to the alloying ratio between Mn and Co. Magnetic susceptibility measurements indicate that the alloyed systems adopt an ordered antiferromagnetic (AFM) configuration with a dependence of the Néel temperature on the alloying ratio. A possible magnetic frustration behavior was observed for the composition MnCoP2S6 due to magnetic moment compensation as the alloying ratio between Mn and Co approaches parity. Interestingly, mixed oxidation states of the metal cation species are also observed in MnxCo2-xP2S6 along with a linear dependence of the work function on the alloying ratio of Mn and Co.
RESUMO
We report three new mixed-anion two-dimensional (2D) compounds: SrFPbBiS3, SrFAg0.5Bi1.5S3, and Sr2F2Bi2/3S2. Their structures as well as the parent compound SrFBiS2 were refined using single-crystal X-ray diffraction data, with the sequence of SrFBiS2, SrFPbBiS3, and SrFAg0.5Bi1.5S3 defining the new homologous series SrFMnBiSn+2 (M = Pb, Ag0.5Bi0.5; n = 0, 1). Sr2F2Bi2/3S2 has a different structure, which is modulated with a q vector of 1/3b* and was refined in superspace group X2/m(0ß0)00 as well as in the 1 × 3 × 1 superstructure with space group C2/m (with similar results). Sr2F2Bi2/3S2 features hexagonal layers of alternating [Sr2F2]2+ and [Bi2/3S2]2-, and the modulated structure arises from the unique ordering pattern of Sr2+ cations. SrFPbBiS3, SrFAg0.5Bi1.5S3, and Sr2F2Bi2/3S2 are semiconductors with band gaps of 1.31, 1.21, and 1.85 eV, respectively. The latter compound exhibits room temperature red photoluminescence at â¼700 nm.
RESUMO
Molten salts are promising reaction media candidates for the discovery of novel materials; however, they offer little control over oxidation state compared to aqueous solutions. Here, we demonstrated that when two hydroxides are mixed, their melts become fluxes with tunable solubility, which are surprisingly powerful solvents for ternary chalcogenides and offer effective paths for crystal growth to new compounds. We report that precise control of the oxidation state of Ni is achievable in mixed molten LiOH/KOH to grow single crystals of all known ternary K-Ni-S compounds. It is also possible to access several new phases, including a new polytope of ß-K2Ni3S4, as well as low-valence KNi4S2 and K4Ni9S11. KNi4S2 is a two-dimensional low-valence nickel-rich sulfide, and ß-K2Ni3S4 has a hexagonal lattice. Moreover, using KNi4S2 as a template, we obtained a new layered binary Ni2S by topotactic deintercalation of K. The new binary Ni2S has a van der Waals gap and can function as a new host layer for intercalation chemistry, as demonstrated by the intercalation of LiOH between its layers. The oxidation states of low-valence KNi4S2 and Ni2S were studied using X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. Density functional theory calculations showed large antibonding interactions at the Fermi level for both KNi4S2 and Ni2S, corresponding to the flat-bands with large Ni-dx2-y2 character.
RESUMO
The detection of γ-rays at room temperature with high-energy resolution using semiconductors is one of the most challenging applications. The presence of even the smallest amount of defects is sufficient to kill the signal generated from γ-rays which makes the availability of semiconductors detectors a rarity. Lead halide perovskite semiconductors exhibit unusually high defect tolerance leading to outstanding and unique optoelectronic properties and are poised to strongly impact applications in photoelectric conversion/detection. Here we demonstrate for the first time that large size single crystals of the all-inorganic perovskite CsPbCl3 semiconductor can function as a high-performance detector for γ-ray nuclear radiation at room temperature. CsPbCl3 is a wide-gap semiconductor with a bandgap of 3.03 eV and possesses a high effective atomic number of 69.8. We identified the two distinct phase transitions in CsPbCl3, from cubic (Pm-3m) to tetragonal (P4/mbm) at 325 K and finally to orthorhombic (Pbnm) at 316 K. Despite crystal twinning induced by phase transitions, CsPbCl3 crystals in detector grade can be obtained with high electrical resistivity of â¼1.7 × 109 Ω·cm. The crystals were grown from the melt with volume over several cubic centimeters and have a low thermal conductivity of 0.6 W m-1 K-1. The mobilities for electron and hole carriers were determined to â¼30 cm2/(V s). Using photoemission yield spectroscopy in air (PYSA), we determined the valence band maximum at 5.66 ± 0.05 eV. Under γ-ray exposure, our Schottky-type planar CsPbCl3 detector achieved an excellent energy resolution (â¼16% at 122 keV) accompanied by a high figure-of-merit hole mobility-lifetime product (3.2 × 10-4 cm2/V) and a long hole lifetime (16 µs). The results demonstrate considerable defect tolerance of CsPbCl3 and suggest its strong potential for γ-radiation and X-ray detection at room temperature and above.
RESUMO
We report a new polymorph of LuRuGe, obtained in indium flux. This phase exhibits the noncentrosymmetric ZrNiAl-type structure with the space group P6Ì 2m as determined by single-crystal X-ray diffraction. This polymorph can convert into another centrosymmetric polymorph (TiNiSi-type structure, space group Pnma) at high temperatures. We performed electrical transport, magnetization, and specific heat measurements on this new phase. It shows metallic behavior with a Hall sign change from negative at 2 K to positive at 125 K. LuRuGe exhibits Pauli paramagnetism as the ground state with no local magnetic moments from either the Ru or Lu site. The Debye temperature Θ = 348 K and electronic coefficient γe = 3.6 mJ K-2 mol-1 are extracted from the low-temperature specific heat data in LuRuGe. We also carried out first-principles density functional theory calculations to map out the electronic band structure and density of states. There are several electronic bands crossing the Fermi level, supporting a multiband scenario consistent with the Hall sign change. The density of states around the Fermi level is mainly from Ru 4d and Ge 4p electrons, indicating a strong hybridization between those atomic orbitals.
RESUMO
Subchalcogenides are uncommon compounds where the metal atoms are in unusually low formal oxidation states. They bridge the gap between intermetallics and semiconductors and can have unexpected structures and properties because of the exotic nature of their chemical bonding as they contain both metal-metal and metal-main group (e.g., halide, chalcogenide) interactions. Finding new members of this class of materials presents synthetic challenges as attempts to make them often result in phase separation into binary compounds. We overcome this difficulty by utilizing indium as a metal flux to synthesize large (millimeter scale) single crystals of novel subchalcogenide materials. Herein, we report two new compounds Ir2In8Q (Q = Se, Te) and compare their structural and electrical properties to the previously reported Ir2In8S analogue. Ir2In8Se and Ir2In8Te crystallize in the P42/mnm space group and are isostructural to Ir2In8S, but also have commensurately modulated (with q vectors q = 1/6a* + 1/6b* and q = 1/10a* + 1/10b* for Ir2In8Se and Ir2In8Te, respectively) low-temperature phase transitions, where the chalcogenide anions in the channels experience a distortion in the form of In-Q bond alternation along the ab plane. Both compounds display re-entrant structural behavior, where the supercells appear on cooling but revert to the original subcell below 100 K, suggesting competing structural and electronic interactions dictate the overall structure. Notably, these materials are topological semimetal candidates with symmetry-protected Dirac crossings near the Fermi level and exhibit high electron mobilities (â¼1500 cm2 V-1 s-1 at 1.8 K) and moderate carrier concentrations (â¼1020 cm-3) from charge transport measurements. This work highlights metal flux as a synthetic route to high quality single crystals of novel intermetallic subchalcogenides with Dirac semimetal behavior.
RESUMO
Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe2 and NaBiTe2 (NaSnmSbTem+2 and NaSnmBiTem+2, respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe2, but not NaBiTe2, into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe2 and NaBiTe2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSnmBiTem+2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSnmSbTem+2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSnmSbTem+2 reaches high ZT ≈ 1.2 at 800-900 K and a competitive average ZTavg of 0.7 over 300-873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.
RESUMO
Polycrystalline Sr3OsO6, which is an ordered double-perovskite insulator, is synthesized via solid-state reaction under high-temperature and high-pressure conditions of 1200 °C and 6 GPa. The synthesis enables us to conduct a comparative study of the bulk form of Sr3OsO6 toward revealing the driving mechanism of 1000 K ferromagnetism, which has recently been discovered for epitaxially grown Sr3OsO6 films. Unlike the film, the bulk is dominated by antiferromagnetism rather than ferromagnetism. Therefore, robust ferromagnetic order appears only when Sr3OsO6 is under the influence of interfaces. A specific heat capacity of 39.6(9) × 10-3 J mol-1 K-2 is found at low temperatures (<17 K). This value is remarkably high, suggesting the presence of possible Fermionic-like excitations at the magnetic ground state. Although the bulk and film forms of Sr3OsO6 share the same lattice basis and electrically insulating state, the magnetism is entirely different between them.
RESUMO
Quasi-one-dimensional (Q1D) structures comprising a compact array of indefinitely long 1D nanowires (NWs) are scarce, especially in a bulk device-scale showing metallic and semiconducting behaviors along different axes. Unlike plentiful observations of nature of defects in three-/two-dimensional materials, there is a notable paucity of such reports in Q1D. Herein we present unconventional motific defects and their properties in a bulk Q1D KMn6Bi5 crystal, in which an individual NW motif acts as one body. We discovered motific inter- and intra-NW defects, such that a linear set of 1D motifs are displaced. Stress generates two domains with altered inter-NW spacings and a Bi-Mn solid solution grain, leading to a local bulk plasmon shift due to NW array reconfiguration as well as atomic rearrangement. The observation of such exotic defects and associated phenomena in this Q1D may provide guidance on overall defect mechanism in other Q1D systems and their collective anisotropic properties.
RESUMO
We report the two-dimensional (2D) natural heterostructure [Pb3.1Sb0.9S4][Au xTe2- x] ( x = 0.52-0.36) which shows anomalous, transverse nonsaturating negative magnetoresistance (MR). For x = 0.52, the material has a commensurately modulated structure with alternating [Pb3.1Sb0.9S4] rocksalt layers and atomically thin [Au xTe2- x] sheets, as determined by single-crystal X-ray diffraction using a (3 + 1)-dimensional space group; for other x compositions, the modulated structure is absent and the Au and Te atoms are disordered. The transport properties in this system at low temperature (<100 K) are dominated by an unusual 2D hopping mechanism, while at room temperature a high carrier mobility of â¼1352 cm2 V-1 s-1 is obtained ( x = 0.36). The confined electrons within the [Au xTe2- x] layers are also exposed to interlayer coupling with the insulating [Pb3.1Sb0.9S4] layers, and as a result, the properties of the heterostructures emerge not only from the constituent layers but also the interactions between them. Furthermore, the various Au and Te coordination patterns found in the [Au xTe2- x] sheets as a function of x further contribute to a unique electronic structure that leads to the anomalous nonsaturating negative MR with different field dependent behaviors. First-principles calculations indicate that the [Au xTe2- x] sheets are responsible for the unusual electrical transport properties in this 2D system.
RESUMO
The new compound NaCu4Se4 forms by the reaction of CuO and Cu in a molten sodium polyselenide flux, with the existence of CuO being unexpectedly critical to its synthesis. It adopts a layered hexagonal structure (space group P63/ mmc with cell parameters a = 3.9931(6) Å and c = 25.167(5) Å), consisting of infinite two-dimensional [Cu4Se4]- slabs separated by Na+ cations. X-ray photoelectron spectroscopy suggests that NaCu4Se4 is mixed-valent with the formula (Na+)(Cu+)4(Se2-)(Se-)(Se2)2-. NaCu4Se4 is a p-type metal with a carrier density of â¼1021 cm-3 and a high hole mobility of â¼808 cm2 V-1 s-1 at 2 K based on electronic transport measurements. First-principles calculations suggest the density of states around the Fermi level are composed of Cu-d and Se-p orbitals. At 2 K, a very large transverse magnetoresistance of â¼1400% was observed, with a nonsaturating, linear dependence on field up to 9 T. Our results indicate that the use of metal oxide chemical precursors can open reaction paths to new low-dimensional compounds.
RESUMO
Dirac and Weyl semimetals host exotic quasiparticles with unconventional transport properties, such as high magnetoresistance and carrier mobility. Recent years have witnessed a huge number of newly predicted topological semimetals from existing databases; however, experimental verification often lags behind such predictions. Common reasons are synthetic difficulties or the stability of predicted phases. Here, we report the synthesis of the type-II Dirac semimetal Ir2In8S, an air-stable compound with a new structure type. This material has two Dirac crossings in its electronic structure along the Γ-Z direction of the Brillouin zone. We further show that Ir2In8S has a high electron carrier mobility of â¼10â¯000 cm2/(V s) at 1.8 K and a large, nonsaturating transverse magnetoresistance of â¼6000% at 3.34 K in a 14 T applied field. Shubnikov de-Haas oscillations reveal several small Fermi pockets and the possibility of a nontrivial Berry phase. With its facile crystal growth, novel structure type, and striking electronic structure, Ir2In8S introduces a new material system to study topological semimetals and enable advances in the field of topological materials.
RESUMO
Semiconductors possessing both magnetic and optoelectronic properties are rare and promise applications in opto-spintronics. Here we report the mixed-anion semiconductor BaFMn0.5Te with a band gap of 1.76 eV and a work function of 5.08 eV, harboring both antiferromagnetism (AFM) and strong red photoluminescence (PL). The synthesis of BaFMn0.5Te in quantitative yield was accomplished using the "panoramic synthesis" technique and synchrotron radiation to obtain the full reaction map, from which we determined that the compound forms upon heating at 850 °C via an intermediate unknown phase. The structure refinement required the use of a (3+1)-dimensional superspace group Cmme(α01/2)0ss. The material crystallizes into a ZrCuSiAs-like structure with alternating [BaF]+ and [Mn0.5Te]- layers and has a commensurately modulated structure with the q-vector of 1/6a* + 1/6b* + 1/2c* at room temperature arising from the unique ordering pattern of Mn2+ cations. Long-range AFM order emerges below 90 K, with two-dimensional short-range AFM correlations above the transition temperature. First-principles calculations indicate that BaFMn0.5Te is an indirect band gap semiconductor with the gap opening between Te 5p and Mn 3d orbitals, and the magnetic interactions between nearest-neighbor Mn2+ atoms are antiferromagnetic. Steady-state PL spectra show a broad strong emission centered at â¼700 nm, which we believe originates from the energy manifolds of the modulated Mn2+ sublattice and its defects. Time-resolved PL measurements reveal an increase in excited-state lifetimes with longer probe wavelengths, from 93 ns (at 650 nm) to 345 ns (at 800 nm), and a delayed growth (6.5 ± 0.3 ns) in the kinetics at 800 nm with a concomitant decay (4.1 ± 0.1 ns) at 675 nm. Together, these observations suggest that there are multiple emissive states, with higher energy states populating lower energy states by energy transfer.
RESUMO
We report a 2D material, KCu7P3, with a noncentrosymmetric structure (trigonal space group P31m, a = 6.9637(2) Å, c = 24.1338 (10) Å), which forms both from a molten potassium polyphosphide flux and from the elements. This phase consists of infinite [Cu7P3]- layers with hexagonal P sheets separated by K+ ions. The structure of the layers is unique but related to both Cu3P and the CaCu4P2 structure-types. Single-crystal refinement reveals extensive disorder within the Cu3P-like slabs. KCu7P3 is paramagnetic and exhibits a room temperature resistivity of â¼335 µΩ cm with a metal-like temperature dependence. The metallic character is supported by density functional theory electronic structure calculations. Hall and Seebeck effect measurements yield p-type behavior with a hole mobility of â¼15 cm2 V-1 s-1 at 300 K and a carrier concentration on the order of 1021 cm-3. KCu7P3 is chemically stable in ambient conditions, as well as in aqueous neutral and acidic solutions.