Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Molecules ; 24(8)2019 Apr 12.
Artigo em Inglês | MEDLINE | ID: mdl-31013720

RESUMO

Rhenium is an element that exhibits a broad range of oxidation states. Synthesis paths of selected rhenium compounds in its seventh oxidation state, which are common precursors for organic reaction catalysts, were presented in this paper. Production technologies for copper perrhenate, aluminum perrhenate as well as the ammonia complex of cobalt perrhenate, are thoroughly described. An ion exchange method, based on Al or Cu metal ion sorption and subsequent elution by aqueous perrhenic acid solutions, was used to obtain perrhenates. The produced solutions were neutralized to afford the targeted aluminum perrhenate and copper perrhenate products in high purity. The developed technologies allow one to manage the wastes from the production of these perrhenates as most streams were recycled. Hexaamminecobalt(III) perrhenate was produced by a newly developed method enabling us to produce a high purity compound in a reaction of spent hexaamminecobalt(III) chloride solution with a perrhenic acid. All prepared compounds are the basis for precursor preparation in organic catalysis.


Assuntos
Alumínio/química , Complexos de Coordenação , Cobre/química , Rênio/química , Catálise , Complexos de Coordenação/síntese química , Complexos de Coordenação/química , Oxirredução
2.
BMC Res Notes ; 17(1): 180, 2024 Jun 26.
Artigo em Inglês | MEDLINE | ID: mdl-38926863

RESUMO

OBJECTIVE: Germanium, an important component of electronics, is considered by many global economies as a critical raw material. Therefore, investigating its potential new sources is crucial for prospective technology development. This paper presents the investigation results on the leaching of liquation-feeding furnace dross using sulfuric and oxalic acid solutions. RESULTS: The dross contained mostly zinc (68.0% wt.) but also elevated germanium concentration (0.68% wt.). The influence of temperature, time, initial acid concentration, and liquid-to-solid phase ratio (L:S) was examined. It was found that germanium availability via leaching is limited-maximum leaching yields using aqueous solutions of sulfuric and oxalic acids were 60% (80 °C, 2 h, 15% wt. H2SO4, L:S 25:1) and 57% (80 °C, 3 h, 12.5% wt. H2C2O4, L:S 10:1), respectively.


Assuntos
Germânio , Ácidos Sulfúricos , Germânio/química , Ácidos Sulfúricos/química , Ácido Oxálico/química , Temperatura , Resíduo Eletrônico/análise
3.
Materials (Basel) ; 16(15)2023 Aug 05.
Artigo em Inglês | MEDLINE | ID: mdl-37570185

RESUMO

Rhenium is largely used as an additive to nickel- and cobalt-based superalloys. Their resistance to temperature and corrosion makes them suitable for the production of turbines in civil and military aviation, safety valves in drilling platforms, and tools working at temperatures exceeding 1000 °C. The purity of commercial rhenium salts is highly important. Potassium, which is a particularly undesirable element, can be removed by recrystallization. Therefore, it is crucial to possess detailed knowledge concerning process parameters including the dissolved solid concentration and the resulting saturation temperature. This can be achieved using simple densimetric methods. Due to the fact that data concerning the physicochemical properties of ammonium perrhenate (APR) NH4ReO4 and potassium perrhenate (PPR) KReO4 are imprecise or unavailable in the scientific literature, the goal of this study is to present experimental data including the solubility and density of water solutions of both salts. In the experiments, a densimeter with a vibrating cell was used to precisely determine the densities. Although the investigated solutions did not fit into the earlier proposed mathematical model, some crucial conclusions could still be made based on the results.

4.
Materials (Basel) ; 12(7)2019 Apr 06.
Artigo em Inglês | MEDLINE | ID: mdl-30959923

RESUMO

Technology used to produce high purity anhydrous rubidium perrhenate on an industrial scale from high purity perrhenic acid and rubidium nitrate by the ion-exchange method is described in this paper. This material is dedicated to catalyst preparation, therefore, strict purity requirements have to be fulfilled. These are satisfied by combining rubidium ion sorption on an ion exchange column and the subsequent elution of the high purity perrhenic acid solution, followed by crystallization, evaporation, purification, and drying. In the current study, rubidium and rhenium contents were found to be 22.5 wt.% and 55.4 wt.%, respectively, while contaminations were as follows: <2 ppm As, <2 ppm Bi, <5 ppm Ca, <5 ppm Cu, <3 ppm Fe, <10 ppm K, <3 ppm Mg, <5 ppm Mo, <2 ppm Na, <5 ppm Pb, and <3 ppm Zn.

SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa