RESUMO
OBJECTIVE: to investigate the effect of different concentrations of chitosan added to experimental resins containing either BAPO or camphorquinone (CQ) as photoinitiators, regarding degree of conversion (DC), flexural strength (FS), flexural elastic modulus (E), Knoop microhardness (KHN), cytotoxicity, genotoxicity and antimicrobial activity. METHODS: Experimental resins with polymeric matrix of BisGMA and TEGDMA was added either 0.5 wt% BAPO or 0.5 wt% camphorquinone/0.2% amine along with and chitosan concentrations of 0.5%; 1.0% or 2.0%. Degree of conversion was measured using Fourier transformed infrared spectroscopy. Flexural strength and elastic modulus were obtained through three-point bending test and Knoop microhardness was measured in a microidenter. Direct cytotoxicity was performed in human keratinocytes and genotoxicity test was done in murine macrophages cells. Antimicrobial activity was acessed against Staphylococcus aureus and Streptococcus mutans through the inhibition halo. Data were analyzed using two-way ANOVA and Tukey teste (α = 0.05). RESULTS: The materials containing photoinitiator BAPO showed higher values of DC, FS, E, and KHN compared to resins with CQ. The addition of chitosan did not affect the properties of these materials. However, in resins containing CQ, the addition of chitosan improve these properties compared to control group. For the groups containing BAPO the chitosan reduced cytotoxicity and genotoxicity compared to materials with camphorquinone. The materials with 1.0% and 2.0% chitosan showed increased antibacterial activity in the materials containing BAPO as photoinitiator for both bacteria. SIGNIFICANCE: The alternative photoinitiator BAPO and chitosan can improve physical and biological properties of photoactivated resins when compared with the materials with photoinitiator camphorquinone.
Assuntos
Anti-Infecciosos , Quitosana , Humanos , Animais , Camundongos , Resinas Compostas/química , Quitosana/farmacologia , Cânfora/farmacologia , Cânfora/química , Teste de Materiais , Metacrilatos , Polimerização , Bis-Fenol A-Glicidil Metacrilato/químicaRESUMO
The present study aimed to evaluate the influence of titanium surface nanotopography on the initial bacterial adhesion process by in vivo and in vitro study models. Titanium disks were produced and characterized according to their surface topography: machined (Ti-M), microtopography (Ti-Micro), and nanotopography (Ti-Nano). For the in vivo study, 18 subjects wore oral acrylic splints containing 2 disks from each group for 24 h (n = 36). After this period, the disks were removed from the splints and evaluated by microbial culture method, scanning electron microscopy (SEM), and qPCR for quantification of Streptococcus oralis, Actinomyces naeslundii, Fusobacterium nucleatum, as well as total bacteria. For the in vitro study, adhesion tests were performed with the species S. oralis and A. naeslundii for 24 h. Data were compared by ANOVA, with Tukey's post-test. Regarding the in vivo study, both the total aerobic and total anaerobic bacteria counts were similar among groups (p > 0.05). In qPCR, there was no difference among groups of bacteria adhered to the disks (p > 0.05), except for A. naeslundii, which was found in lower proportions in the Ti-Nano group (p < 0.05). In the SEM analysis, the groups had a similar bacterial distribution, with a predominance of cocci and few bacilli. In the in vitro study, there was no difference in the adhesion profile for S. oralis and A. naeslundii after 24 h of biofilm formation (p > 0.05). Thus, we conclude that micro- and nanotopography do not affect bacterial adhesion, considering an initial period of biofilm formation.
Assuntos
Aderência Bacteriana , Titânio , Humanos , Fusobacterium nucleatum , Microscopia Eletrônica de Varredura , Projetos de PesquisaRESUMO
OBJECTIVE: Silica nanoparticles (SNPs) have been extensively studied and used in different dental applications to promote improved physicochemical properties, high substance loading efficiency, in addition to sustained delivery of substances for therapeutic or preventive purposes. Therefore, this study aimed to review the SNPs applications in nanomaterials and nanoformulations in dentistry, discussing their effect on physicochemical properties, biocompatibility and ability to nanocarry bioactive substances. DATA RESOURCES: Literature searches were conducted on PubMed, Web of Science, and Scopus databases to identify studies examining the physicochemical and biological properties of dental materials and formulations containing SNPs. Data extraction was performed by one reviewer and verified by another STUDY SELECTION: A total of 50 were reviewed. In vitro studies reveal that SNPs improved the general properties of dental materials and formulations, such as microhardness, fracture toughness, flexural strength, elastic modulus and surface roughness, in addition to acting as efficient nanocarriers of substances, such as antimicrobial, osteogenic and remineralizing substances, and showed biocompatibility CONCLUSIONS: SNPs are biocompatible, improve properties of dental materials and serve as effective carriers for bioactive substances CLINICAL SIGNIFICANCE: Overall, SNPs are a promising drug delivery system that can improve dental materials biological and physicochemical and aesthetic properties, increasing their longevity and clinical performance. However, more studies are needed to elucidate SNPs short- and long-term effects in the oral cavity, mainly on in vivo and clinical studies, to prove their effectiveness and safety.
RESUMO
Abstract For places where non-sterile drug production occurs, regulatory bodies recommend monitoring of the environmental bioburden. This procedure provides information regarding possible microbiological risks to which the products may be exposed, so that subsequent action measures may be implemented. The aim of the present work was to quantify and characterize the microorganisms present in Grade D (ISO 8) cleanrooms of a Brazilian pharmaceutical industry, identifying any possible seasonal climatic influences on these environments. Sampling was performed by surface and air monitoring, over 12 months during the year 2019, in rooms that were in operation. For both sampling methods, no statistically significant differences in bacteria and fungi counts were found between months or seasonal periods. Microorganisms that presented higher incidence included Staphylococcus epidermidis (15%) and Micrococcus spp. (13%), common to the human microbiota, and the fungi Cladosporium sp. (23%) and Penicillium sp. (21%), typical of the external environment. The results showed that microbial contamination in the Grade D cleanrooms was within the permissible maximum levels and remained similar throughout the year. Microbiological quality control in the clean areas of the pharmaceutical industry investigated was considered effective, with regular maintenance being necessary to keep bioburden levels controlled.
Assuntos
Bactérias/classificação , Monitoramento Ambiental/instrumentação , Monitoramento Ambiental/métodos , Indústria Farmacêutica/instrumentação , Poluição Ambiental/prevenção & controle , Microbiota/imunologia , Fungos/classificaçãoRESUMO
Abstract The present study aimed to evaluate the influence of titanium surface nanotopography on the initial bacterial adhesion process by in vivo and in vitro study models. Titanium disks were produced and characterized according to their surface topography: machined (Ti-M), microtopography (Ti-Micro), and nanotopography (Ti-Nano). For the in vivo study, 18 subjects wore oral acrylic splints containing 2 disks from each group for 24 h (n = 36). After this period, the disks were removed from the splints and evaluated by microbial culture method, scanning electron microscopy (SEM), and qPCR for quantification of Streptococcus oralis, Actinomyces naeslundii, Fusobacterium nucleatum, as well as total bacteria. For the in vitro study, adhesion tests were performed with the species S. oralis and A. naeslundii for 24 h. Data were compared by ANOVA, with Tukey's post-test. Regarding the in vivo study, both the total aerobic and total anaerobic bacteria counts were similar among groups (p > 0.05). In qPCR, there was no difference among groups of bacteria adhered to the disks (p > 0.05), except for A. naeslundii, which was found in lower proportions in the Ti-Nano group (p < 0.05). In the SEM analysis, the groups had a similar bacterial distribution, with a predominance of cocci and few bacilli. In the in vitro study, there was no difference in the adhesion profile for S. oralis and A. naeslundii after 24 h of biofilm formation (p > 0.05). Thus, we conclude that micro- and nanotopography do not affect bacterial adhesion, considering an initial period of biofilm formation.
RESUMO
Objetivo: Descrever as recomendações, características físicas, métodos de desinfecção e eficácia de uso de máscaras caseiras na redução da transmissão da COVID-19. Métodos: Realizou-se busca nas bases de dados MEDLINE, SciELO e Google Scholar, além das recomendações oficiais de uso. Resultados: Foram incluídas 31 referências. A capacidade de filtração de tecidos variou entre 5% e 98%. Tecidos 100% algodão em duas ou três camadas apresentaram eficácia de filtração entre 70% e 99% em estudos in vitro. Máscaras caseiras, cirúrgicas e respiradores apresentaram respirabilidade entre 2,2 e 3,0 Pascal. A capacidade de redução da propagação de microrganismos por pessoas usando máscaras caseiras foi três vezes menor do que usando máscaras cirúrgicas, embora tenha sido superior ao não uso de máscaras. Conclusão: A respirabilidade de máscaras caseiras mostrou-se adequada, enquanto a capacidade de filtração parece ser inferior à das máscaras cirúrgicas, mas superior a não se usar máscara. Não há evidências que respaldem a eficácia e efetividade das máscaras caseiras.
Objetivo: Describir las recomendaciones, características físicas, métodos de desinfección y efectividad de mascarillas caseras para reducir la transmisión de COVID-19. Métodos: La búsqueda se realizó en las bases de datos MEDLINE, SciELO y Google Scholar, además de las recomendaciones oficiales de uso. Resultados: Se incluyeron 31 referencias. La capacidad de filtración de los tejidos varió entre 5% y 98%. Los tejidos al 100% de algodón, en dos o tres capas, mostraron eficiencia de filtración entre 70% y 99%, en estudios in vitro. Mascarillas caseras, quirúrgicas y de respiradores mostraron respirabilidad entre 2,2 y 3,0 Pascal. La capacidad de reducir la propagación de microorganismos por personas que usan máscarillas caseras fue tres veces menor que cuando usaban mascarillas quirúrgicas, pero superior a no usarlas. Conclusión: La respirabilidad de las mascarillas caseras puede ser adecuada, mientras que la eficiencia de filtración parece ser inferior a la de las mascarillas quirúrgicas, pero superior a no utilizar mascarilla. No hay evidencia que respalde su eficacia y efectividad.
Objective: To describe the recommendations, physical characteristics, disinfection methods and efficacy of the use of homemade face masks to reduce COVID-19 transmission. Methods: We searched MEDLINE, SciELO, and Google Scholar, in addition to the official recommendations for the use of masks. Results: Thirty-one references were included. Fabric filtration efficiency ranged from 5% to 98%. The filtration efficacy of three layered 100% cotton fabric face masks ranged from 70% and 99% in vitro studies. Homemade, surgical, and respirator masks showed breathability between 2.2 and 3.0 Pascal. The capacity to reduce the spread of microorganisms by people wearing homemade face masks was three times lower when compared to those wearing surgical masks, although this capacity was higher when compared to those who did not wear masks. Conclusion: The breathability of homemade masks proved to be adequate, while the filtration ability seemed to be lower than that of surgical masks, but it was better than not wearing any masks at all. There is no evidence to support the efficacy and effectiveness of homemade masks.
Assuntos
Humanos , Dispositivos de Proteção Respiratória/normas , COVID-19/prevenção & controle , COVID-19/transmissão , Pandemias , Máscaras/provisão & distribuiçãoRESUMO
Abstract Objective: Single dose of systemic antibiotics and short-term use of mouthwashes reduce bacteremia. However, the effects of a single dose of preprocedural rinse are still controversial. This study evaluated, in periodontally diseased patients, the effects of a pre-procedural mouth rinse on induced bacteremia. Material and Methods: Systemically healthy individuals with gingivitis (n=27) or periodontitis (n = 27) were randomly allocated through a sealed envelope system to: 0.12% chlorhexidine pre-procedural rinse (13 gingivitis and 13 periodontitis patients) or no rinse before dental scaling (14 gingivitis and 15 periodontitis patients). Periodontal probing depth, clinical attachment level, plaque, and gingival indices were measured and subgingival samples were collected. Blood samples were collected before dental scaling, 2 and 6 minutes after scaling. Total bacterial load and levels of P. gingivalis were determined in oral and blood samples by real-time polymerase chain reaction, while aerobic and anaerobic counts were determined by culture in blood samples. The primary outcome was the antimicrobial effect of the pre-procedural rinse. Data was compared by Mann-Whitney and Signal tests (p<0.05). Results: In all sampling times, polymerase chain reaction revealed higher blood bacterial levels than culture (p<0.0001), while gingivitis patients presented lower bacterial levels in blood than periodontitis patients (p<0.0001). Individuals who experienced bacteremia showed worse mean clinical attachment level (3.4 mm vs. 1.1 mm) and more subgingival bacteria (p<0.005). The pre-procedural rinse did not reduce induced bacteremia. Conclusions: Bacteremia was influenced by periodontal parameters. In periodontally diseased patients, pre-procedural rinsing showed a discrete effect on bacteremia control.
Assuntos
Humanos , Masculino , Feminino , Adolescente , Adulto , Pessoa de Meia-Idade , Adulto Jovem , Periodontite/tratamento farmacológico , Clorexidina/administração & dosagem , Raspagem Dentária , Bacteriemia/prevenção & controle , Gengivite/tratamento farmacológico , Antissépticos Bucais/administração & dosagem , Periodontite/microbiologia , Índice de Gravidade de Doença , Bacteriemia/tratamento farmacológico , Reação em Cadeia da Polimerase em Tempo RealRESUMO
ABSTRACT Objective Halitosis can be caused by microorganisms that produce volatile sulphur compounds (VSCs), which colonize the surface of the tongue and subgingival sites. Studies have reported that the use of natural products can reduce the bacterial load and, consequently, the development of halitosis. The aim of this study was to evaluate the antimicrobial activity of the essential oil of Melaleuca alternifolia on the growth and volatile sulphur compound (VSC) production of oral bacteria compared with chlorhexidine. Material and Methods The effects of these substances were evaluated by the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) in planktonic cultures of Porphyromonas gingivalis and Porphyromonas endodontalis. In addition, gas chromatography analyses were performed to measure the concentration of VSCs from bacterial cultures and to characterize M. alternifolia oil components. Results The MIC and MBC values were as follows: M. alternifolia - P. gingivalis (MIC and MBC=0.007%), P. endodontalis (MIC and MBC=0.007%=0.5%); chlorhexidine - P. gingivalis and P. endodontalis (MIC and MBC=1.5 mg/mL). M. alternifolia significantly reduced the growth and production of hydrogen sulfide (H2S) by P. gingivalis (p<0.05, ANOVA-Dunnet) and the H2S and methyl mercaptan (CH3SH) levels of P. endodontalis (p<0.05, ANOVA-Dunnet). Chlorhexidine reduced the growth of both microorganisms without altering the production of VSC in P. endodontalis. For P. gingivalis, the production of H2S and CH3SH decreased (p<0.05, ANOVA-Dunnet). Conclusion M. alternifolia can reduce bacterial growth and VSCs production and could be used as an alternative to chlorhexidine.
Assuntos
Compostos de Enxofre/metabolismo , Porphyromonas gingivalis/efeitos dos fármacos , Óleo de Melaleuca/farmacologia , Melaleuca/química , Porphyromonas endodontalis/efeitos dos fármacos , Antibacterianos/farmacologia , Compostos de Enxofre/análise , Fatores de Tempo , Testes de Sensibilidade Microbiana , Células Cultivadas , Reprodutibilidade dos Testes , Análise de Variância , Porphyromonas gingivalis/crescimento & desenvolvimento , Porphyromonas gingivalis/metabolismo , Porphyromonas endodontalis/crescimento & desenvolvimento , Porphyromonas endodontalis/metabolismo , Carga Bacteriana/efeitos dos fármacos , Halitose/metabolismo , Halitose/microbiologia , Halitose/prevenção & controle , Cromatografia Gasosa-Espectrometria de MassasRESUMO
Objective: To describe the recommendations, physical characteristics, methods of disinfection and the effectiveness of using homemade masks in reducing the transmission of COVID-19. Methods: Search was performed in the MEDLINE, SciELO and Google Scholar databases, in addition to the official recommendations for use. Results: 31 references were included. The filtration capacity of tissues varied between 5 and 98%. 100% cotton fabrics in two or three layers showed filtration efficiency between 70 and 99%, in vitro. Homemade masks, surgical and respirators showed breathability between 2.2 to 3.0 Pascal. The ability to reduce the spread of microorganisms by people wearing home masks was three times less than when using surgical masks, but it was superior to not wearing masks. Conclusion: The breathability of homemade masks may be adequate, while the filtration efficiency seems to be inferior to surgical masks, but superior to no mask use. There is no evidence to support the efficacy and effectiveness of homemade masks.
Objetivo: Descrever as recomendações, características físicas, métodos de desinfecção e eficácia de uso de máscaras caseiras na redução da transmissão da COVID-19. Métodos: Realizou-se busca nas bases de dados MEDLINE, SciELO e Google Scholar, além das recomendações oficiais de uso. Resultados: Foram incluídas 31 referências. A capacidade de filtração de tecidos variou entre 5 e 98%. Tecidos 100% algodão em duas ou três camadas apresentaram eficácia de filtração entre 70 e 99% em estudos in vitro. Máscaras caseiras, cirúrgicas e respiradores apresentaram respirabilidade entre 2,2 e 3,0 Pascal. A capacidade de redução da propagação de microrganismos por pessoas usando máscaras caseiras foi três vezes menor do que ao usar máscaras cirúrgicas, embora tenha sido superior ao não uso de máscaras. Conclusão: A respirabilidade de máscaras caseiras mostrou-se adequada, enquanto a eficácia de filtração parece ser inferior à das máscaras cirúrgicas, mas superior a não usar máscara. Não há evidências que respaldem a eficácia e efetividade das máscaras caseiras.