Laser-induced 2D/0D graphene-nanoceria freestanding paper-based films for on-site hydrogen peroxide monitoring in no-touch disinfection treatments.

A one-shot CO2 laser-based strategy to generate conductive reduced graphene oxide (rGO) decorated with nanoceria (nCe) is proposed. The 2D/0D rGO-nCe films, integrated as catalytic sensing layers in paper-based sensors, were employed for on-site monitoring of indoor fogging treatments against Listeria monocytogenes (Lm), a ubiquitous pathogenic bacterium. The rGO-nCe laser-assisted synthesis was optimized to preserve the rGO film morphological and electron-transfer features and simultaneously integrate catalytic nCe. The films were characterized by microscopical (SEM), spectroscopical (EDX, Raman, and FTIR), and electrochemical techniques. The most performing film was integrated into a nitrocellulose substrate, and the complete sensor was assembled via a combination of xurography and stencil printing. The rGO-nCe sensor's catalytic activity was proved toward the detection of H2O2, obtaining sensitive determination (LOD = 0.3 µM) and an extended linear range (0.5-1500 µM). Eventually, the rGO-nCe sensor was challenged for the real-time continuous monitoring of hydrogen peroxide aerosol during no-touch fogging treatment conducted following the EU's recommendation for biocidal product use. Treatment effectiveness was proved toward three Lm strains characterized by different origins, i.e., type strain ATCC 7644, clinical strain 338, and food strain 641/6II. The sensor allows for discrimination and quantification treatments at different environmental biocidal amounts and fogging times, and correlates with the microbiological inhibition, promoting the proposed sensor as a useful tool to modulate and monitor no-touch treatments.

Impedimetric immunosensor for microalbuminuria based on a WS2/Au water-phase assembled nanocomposite.

An electrochemical impedimetric biosensor for human serum albumin (HSA) determination is proposed. The biosensor is based on water-phase assembled nanocomposites made of 2D WS2 nanoflakes and Au nanoparticles (AuNPs). The WS2 has been produced using a liquid-phase exfoliation strategy assisted by sodium cholate, obtaining a water-stable suspension that allowed the straightforward decoration with AuNPs directly in the aqueous phase. The resulting WS2/Au nanocomposite has been characterized by atomic force microscopy and Raman spectroscopy and, then, employed to modify screen-printed electrodes. Good electron-transfer features have been achieved. An electrochemical immunosensing platform has been assembled exploiting cysteamine-glutaraldehyde covalent chemistry for antibody (Ab) immobilization. The resulting immunosensor exhibited good sensitivity for HSA detection (LOD = 2 ng mL-1), with extended linear range (0.005 - 100 µg mL-1), providing a useful analytical tool for HSA determination in urine at relevant clinical ranges for microalbuminuria screening. The HSA quantification in human urine samples resulted in recoveries from 91.8 to 112.4% and was also reproducible (RSD < 7.5%, n = 3), with marked selectivity. This nanocomposite, thanks to the reliable performance and the ease of the assembling strategy, is a promising alternative for electrochemical immunosensing of health relevant markers.

Catechin versus MoS2 Nanoflakes Functionalized with Catechin: Improving the Sperm Fertilizing Ability-An In Vitro Study in a Swine Model.

Nowadays, the adoption of In Vitro Fertilization (IVF) techniques is undergoing an impressive increase. In light of this, one of the most promising strategies is the novel use of non-physiological materials and naturally derived compounds for advanced sperm preparation methods. Here, sperm cells were exposed during capacitation to MoS2/Catechin nanoflakes and catechin (CT), a flavonoid with antioxidant properties, at concentrations of 10, 1, 0.1 ppm. The results showed no significant differences in terms of sperm membrane modifications or biochemical pathways among the groups, allowing the hypothesis that MoS2/CT nanoflakes do not induce any negative effect on the parameters evaluated related to sperm capacitation. Moreover, the addition of CT alone at a specific concentration (0.1 ppm) increased the spermatozoa fertilizing ability in an IVF assay by increasing the number of fertilized oocytes with respect to the control group. Our findings open interesting new perspectives regarding the use of catechins and new materials obtained using natural or bio compounds, which could be used to implement the current strategies for sperm capacitation.

Development of an HPLC-MS/MS Method for the Determination of Alkaloids in Lupins.

Lupin alkaloids (LAs) represent a class of toxic secondary metabolites in plants, in particular in Lupinus spp.; they are produced as a defense mechanism due to their strong bitter taste and are very dangerous for human and animals. In this work, a sensitive and reliable high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) analytical method for the identification and quantification of thirteen lupin alkaloids was developed and validated according to FDA guidelines. Efficient extraction and clean-up steps, carried out by solid-phase extraction, were finely tuned on the basis of the characteristics of the analytes and lupin samples, providing good selectivity with minimized matrix interference. The effectiveness of the method was proven by the satisfactory recovery values obtained for most of the analytes and a matrix effect ≤23% for all tested levels. In addition, a sensitive and reliable determination of the target compounds was obtained; LOQs were between 1 and 25 µg Kg-1, i.e., below the requested maximum levels (<200 mg Kg-1). The method was applied to evaluate the LAs profile in different batches of raw L. albus L. samples, varying in size and across farming treatments.

Study on Molecularly Imprinted Polymers Obtained Sonochemically for the Determination of Aflatoxins in Food.

Aflatoxins (AFs) are fungi secondary metabolites produced by the Aspergillus family. These compounds can enter the food chain through food contamination, representing a risk to human health. Commercial immunoaffinity columns are widely used for the extraction and cleanup of AFs from food samples; however, their high cost and large solvent consumption create a need for alternative strategies. In this work, an alternative strategy for producing molecularly imprinted polymers (MIPs) was proposed to extract aflatoxins AFB1, AFB2, AFG1, and AFG2 from complex food samples, using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). The MIPs were synthesized via a low-cost and rapid (5 min) sonochemical free-radical polymerization, using 1-hydroxy-2-naphthoic acid as a dummy template. MIPs-based solid phase extraction performance was tested on 17 dietary supplements (vegetables, fruits, and cereals), obtaining appreciable recovery rates (65-90%) and good reproducibility (RSD ≤ 6%, n = 3); the selectivity towards other mycotoxins was proved and the data obtained compared with commercial immunoaffinity columns. The proposed strategy can be considered an alternative affordable approach to the classical immunoaffinity columns, since it is more selective and better performing.

Impact of Saccharomyces cerevisiae and non-Saccharomyces yeasts to improve traditional sparkling wines production.

In this study the effect of a co-inoculum of S. cerevisiae (F6789) with Torulaspora delbrueckii (TB1) or Starmerella bacillaris (SB48) on the oenological and aroma characteristics of sparkling wines obtained with the Champenoise method was investigated. The autolytic outcome and the sensory profile of sparkling wines were also evaluated. The secondary fermentations were completed by all mixed and single starter cultures with the only exception of those guided by Starm.bacillaris. Sparkling wines produced with S. cerevisiae F6789+Starm.bacillaris SB48 showed the highest amounts of glycerol (6.51 g/L). The best autolytic potential was observed in sparkling wines produced with +Starm.bacillaris (81.98 mg leucin/L) and S. cerevisiae+T. delbrueckii (79.03 mg leucin/L). The lowest value was observed for sparkling wines obtained with S. cerevisiae F6789 (53.96 mg leucin/L). Sparkling wines showed different aroma and sensory profiles. Esters were mainly present in sparkling wines obtained with S. cerevisiae F6789 (88.09 mg/L) followed by those obtained with S. cerevisiae+T. delbrueckii (87.20 mg/L), S. cerevisiae +Starm.bacillaris (81.93 mg/L). The content of esters decreased over time, and that might be related to the adsorption on lees and chemical hydrolysis. The highest concentrations of higher alcohols were found in sparkling wines produced with S. cerevisiae+T. delbrueckii (27.50 mg/L). Sparkling wines obtained with S. cerevisiae +Starm.bacillaris were well differentiated from the others due to their high score for the descriptor for spicy, bread crust, freshness and floral. Tailored strains with different autolytic potential might represent an interesting strategy to improve traditional sparkling wine production and favour their differentiation.

New trends in enzyme-free electrochemical sensing of ROS/RNS. Application to live cell analysis.

The ubiquity and importance of ROS and RNS in cellular signaling, disease development, and death give rise to an outstanding interest in their detection and quantification. Among the analytical techniques available, electrochemical sensors stand out for the detection of ROS/RNS due to their high sensitivity and inherent miniaturization which allows the in situ and real-time detection together with a tunable selectivity due to the different electrochemical behavior of ROS/RNS. Nanomaterial-based enzyme-free electrochemical sensors possess improved sensitivity, selectivity, stability, and unique catalytic activities. In addition, their integration in nanoelectrodes, lab-on-chips, microfluidic systems, and stretchable electrodes allow the determination of ROS/RNS in individual cells, cell organelles, or cell populations, under different experimental conditions hardly accessible using classical detection methods.

Predictive Multi Experiment Approach for the Determination of Conjugated Phenolic Compounds in Vegetal Matrices by Means of LC-MS/MS.

Polyphenols (PCs) are a numerous class of bioactive molecules and are known for their antioxidant activity. In this work, the potential of the quadrupole/linear ion trap hybrid mass spectrometer (LIT-QqQ) was exploited to develop a semi-untargeted method for the identification of polyphenols in different food matrices: green coffee, Crocus sativus L. (saffron) and Humulus lupulus L. (hop). Several conjugate forms of flavonoids and hydroxycinnamic acid were detected using neutral loss (NL) as a survey scan coupled with dependent scans with enhanced product ion (EPI) based on information-dependent acquisition (IDA) criteria. The presented approach is focused on a specific class of molecules and provides comprehensive information on the different conjugation models that are related to specific base molecules, thus allowing a quick and effective identification of all possible combinations, such as mono-, di-, or tri-glycosylation or another type of conjugation such as quinic acid esters.

(+)-Catechin-assisted graphene production by sonochemical exfoliation in water. A new redox-active nanomaterial for electromediated sensing.

A new green and effective sonochemical liquid-phase exfoliation (LPE) is proposed wherein a flavonoid compound, catechin (CT), promotes the formation of conductive, redox-active, water-phase stable graphene nanoflakes (GF). To maximize the GF-CT redox activity, the CT concentration and sonication time have been studied, and the best performing nanomaterial-fraction selected. Physicochemical and electrochemical methods have been employed to characterize the morphological, structural, and electrochemical features of the GF-CT nanoflakes. The obtained GF intercalated with CT exhibits fully reversible electrochemistry (ΔEp = 28 mV, ipa/ipc = ⁓1) because of the catecholic adducts. GF-CT-integrated electrochemistry was generated directly during LPE of graphite, with no need of graphene oxide production, nor activation steps, electropolymerization, or ex-post functionalization. The GF-CT electro-mediator ability has been proven towards hydrazine (HY) and ß-nicotinamide adenine dinucleotide (NADH) by simply drop-casting the redox-material onto screen-printed electrodes. GF-CT-based electrodes by using amperometry exhibited high sensitivity and extended linear ranges (HY: LOD = 0.1 µM, L.R. 0.5-150 µM; NADH: LOD = 0.6 µM, L.R. 2.5-200 µM) at low overpotential (+ 0.15 V) with no electrode fouling. The GF-CT electrodes are performing significantly better than commercial graphite electrodes and graphene nanoflakes exfoliated with a conventional surfactant, such as sodium cholate. Recoveries of 94-107% with RSD ≤ 8% (n = 3) for determination of HY and NADH in environmental and biological samples were achieved, proving the material functionality also in challenging analytical media. The presented GF-CT is a new functional redox-active material obtainable with a single-pot sustainable strategy, exhibiting standout properties particularly prone to (bio)sensors and cutting-edge device development.

Molecularly Imprinted Polymers Combined with Electrochemical Sensors for Food Contaminants Analysis.

Detection of relevant contaminants using screening approaches is a key issue to ensure food safety and respect for the regulatory limits established. Electrochemical sensors present several advantages such as rapidity; ease of use; possibility of on-site analysis and low cost. The lack of selectivity for electrochemical sensors working in complex samples as food may be overcome by coupling them with molecularly imprinted polymers (MIPs). MIPs are synthetic materials that mimic biological receptors and are produced by the polymerization of functional monomers in presence of a target analyte. This paper critically reviews and discusses the recent progress in MIP-based electrochemical sensors for food safety. A brief introduction on MIPs and electrochemical sensors is given; followed by a discussion of the recent achievements for various MIPs-based electrochemical sensors for food contaminants analysis. Both electropolymerization and chemical synthesis of MIP-based electrochemical sensing are discussed as well as the relevant applications of MIPs used in sample preparation and then coupled to electrochemical analysis. Future perspectives and challenges have been eventually given.

Xurography-Enabled Thermally Transferred Carbon Nanomaterial-Based Electrochemical Sensors on Polyethylene Terephthalate-Ethylene Vinyl Acetate Films.

A novel benchtop approach to fabricate xurography-enabled thermally transferred (XTT) carbon nanomaterial-based electrochemical sensors is proposed. Filtered nanomaterial (NM) films were transferred from Teflon filters to polyethylene terephthalate-ethylene vinyl acetate (PET-EVA) substrates by a temperature-driven approach. Customized PET-EVA components were xurographically patterned by a cutting plotter. The smart design of PET-EVA films enabled us to selectively transfer the nanomaterial to the exposed EVA side of the substrate. Hence, the substrate played an active role in selectively controlling where nanomaterial transfer occurred allowing us to design different working electrode geometries. Counter and reference electrodes were integrated by a stencil-printing approach, and the whole device was assembled by thermal lamination. To prove the versatility of the technology, XTT materials were exclusively made of carbon black (XTT-CB), multiwalled carbon nanotubes (XTT-MWCNTs), and single-walled carbon nanotubes (XTT-SWCNTs). Their electrochemical behavior was carefully studied and was found to be highly dependent on the amount and type of NM employed. XTT-SWCNTs were demonstrated to be the best-performing sensors, and they were employed for the determination of l-tyrosine (l-Tyr) in human plasma from tyrosinemia-diagnosed patients. High analytical performance toward l-Tyr (linear range of 0.5-100 µM, LOD = 0.1 µM), interelectrode precision (RSD ip,a = 3%, n = 10; RSD calibration slope = 4%, n = 3), and accurate l-Tyr quantification in plasma samples with low relative errors (≤7%) compared to the clinical declared values were obtained. The proposed benchtop approach is cost-effective and straightforward, does not require sophisticated facilities, and can be potentially employed to develop pure or hybrid nanomaterial-based electrodes.

Colorimetric determination of polyphenols via a gold nanoseeds-decorated polydopamine film.

A polystyrene ELISA plate (EP) modified with a thin film based on gold nanoseeds (AuSDs) assembled onto polydopamine (PDA) is proposed. The nanodecorated film (PDA@AuSD) allows to evaluate the polyphenols antioxidant capacity (AOC) through a colorimetric approach based on a seed-mediated growth strategy. Polyphenols, in the presence of the nanodecorated (PDA@AuSD) surfaces are able to drive an increase in size of the AuSDs according to their AOC; this produces an increase of the localized surface plasmon resonance (LSPR; maximum at λ ~ 550 nm) that is taken as analytical signal. The PDA@AuSD EP manufacturing shows good intraplates repeatability (RSD ≤ 6.6%, n = 96 wells) and interplates reproducibility (RSD ≤ 7.4%, n = 748 wells), resulting stable for 1 year. The AuSDs growth kinetic has been studied using 11 polyphenols belonging to different chemical classes and 4 different food samples. The PDA@AuSD film is able to return quantitative information on the AOC of food polyphenols. Good repeatability (RSD ≤ 5.7%, n = 12 EP wells) and reproducibility (RSD ≤ 8.1%, n = 12 EP wells) was achieved, with acceptable linear correlation coefficients (R2 ≥ 0.990) and useful limits of detection (LODs ≤ 2.5 10-5 mol L-1). The samples analyzed with the PDA@AuSD device have been successfully ordered according to their AOC in agreement with conventional optical methods. The PDA@AuSD plate allows multiple measurements (96 wells per EP) with a one-step strategy, overcoming the limitations related to the use of colloidal nanoparticles; in addition, since absorbance is measured after washing, it is not affected by sample color or turbidity. Graphical abstract Schematic representation of ELISA plate (EP) modified with polydopamine (PDA) film decorated with gold nanoseeds (AuSD). The colorimetric assay, to evaluate the antioxidant capacity, is based on the AuSD growth mediated by polyphenols, resulting in absorbance increase at 550 nm (ΔAbs550), which is employed as analytical signal.

Class-selective voltammetric determination of hydroxycinnamic acids structural analogs using a WS2/catechin-capped AuNPs/carbon black-based nanocomposite sensor.

A high-performance screen-printed electrode (SPE) based nanocomposite sensor integrating tungsten disulfide (WS2) flakes decorated with catechin-capped gold nanoparticles (AuNP-CT) and carbon black (CB) has been developed. The excellent antifouling properties of WS2 decorated with AuNP-CT into a high conductivity network of CB results in high selectivity, sensitivity, and reproducibility for the simultaneous determination of hydroxycinnamic acid (hCN) structural analogs: caffeic (CF), sinapic (SP), and p-coumaric acids (CM). Using differential pulse voltammetry (DPV), the target hCNs resulted in three well-resolved oxidation peaks at SPE-CB-WS2/AuNP-CT sensor. Excellent antifouling performance (RSD ip,a ≤ 3%, n = 15 for three analytes' simultaneous measure) and low detection limits (CF 0.10 µmol L-1; SP, 0.40 µmol L-1; CM, 0.40 µmol L-1) are obtained despite the analyzed compounds having a high passivation tendency towards carbon-based sensors. The SPE-CB-WS2/AuNP-CT sensor was successfully applied to determine CF, SP, and CM in food samples with good precision (RSD ≤ 4%, n = 3) and recoveries (86-109%; RSD ≤ 5%, n = 3). The proposed sensor is the first example exploiting the simultaneous determination of these compounds in food samples. Given its excellent electrochemical performance, low cost, disposability, and ease of use, this SPE-CB-WS2/AuNP-CT nanocomposite sensor represents a powerful candidate for the realization of electrochemical devices for the determination of (bio)compounds with high passivation tendency. Graphical abstract.

Peptides, DNA and MIPs in Gas Sensing. From the Realization of the Sensors to Sample Analysis.

Detection and monitoring of volatiles is a challenging and fascinating issue in environmental analysis, agriculture and food quality, process control in industry, as well as in 'point of care' diagnostics. Gas chromatographic approaches remain the reference method for the analysis of volatile organic compounds (VOCs); however, gas sensors (GSs), with their advantages of low cost and no or very little sample preparation, have become a reality. Gas sensors can be used singularly or in array format (e.g., e-noses); coupling data output with multivariate statical treatment allows un-target analysis of samples headspace. Within this frame, the use of new binding elements as recognition/interaction elements in gas sensing is a challenging hot-topic that allowed unexpected advancement. In this review, the latest development of gas sensors and gas sensor arrays, realized using peptides, molecularly imprinted polymers and DNA is reported. This work is focused on the description of the strategies used for the GSs development, the sensing elements function, the sensors array set-up, and the application in real cases.

Nanohybrid carbon black-molybdenum disulfide transducers for preconcentration-free voltammetric detection of the olive oil o-diphenols hydroxytyrosol and oleuropein.

A new hybrid nanomaterial is used in a screen-printed electrode (SPE) for sensing of the ortho-diphenols oleuropein (OLEU) and hydroxytyrosol (HYT) in extra virgin olive oil (EVOO) and related samples. The hybrid material consists of carbon black (CB) and molybdenum disulfide (MoS2). In comparison with individual nanomaterials, CB-MoS2 exhibits improved charge-transfer ability, low charge-transfer resistance, high electrical conductivity and enhanced electrocatalysis. The sensor is also characterized by (a) high sensitivity that avoids the need for adsorptive voltammetry, (b) reduced analysis time, and (c) high anti-fouling ability (electrode RSDOLEU < 8%, for n = 10). OLEU can be detected in the 0.3 to 30 µM concentration range with a 0.1 µM LOD, and HYT in the 2-100 µM range with a 1 µM LOD. A comparison of the data obtained by this sensor and by HPLC-UV exhibited high correlation (r = 0.995, p < 0.05). These data revealed the reliability of CB-MoS2 for analysis of complex EVOO and related samples. Graphical abstract CB-MoS2-based electrochemical sensor for fast and reliable assessment of total ortho-diphenols antioxidants in olive oils.

Electrochromic Molecular Imprinting Sensor for Visual and Smartphone-Based Detections.

Electrochromic effect and molecularly imprinted technology have been used to develop a sensitive and selective electrochromic sensor. The polymeric matrices obtained using the imprinting technology are robust molecular recognition elements and have the potential to mimic natural recognition entities with very high selectivity. The electrochromic behavior of iridium oxide nanoparticles (IrOx NPs) as physicochemical transducer together with a molecularly imprinted polymer (MIP) as recognition layer resulted in a fast and efficient translation of the detection event. The sensor was fabricated using screen-printing technology with indium tin oxide as a transparent working electrode; IrOx NPs where electrodeposited onto the electrode followed by thermal polymerization of polypyrrole in the presence of the analyte (chlorpyrifos). Two different approaches were used to detect and quantify the pesticide: direct visual detection and smartphone imaging. Application of different oxidation potentials for 10 s resulted in color changes directly related to the concentration of the analyte. For smartphone imaging, at fixed potential, the concentration of the analyte was dependent on the color intensity of the electrode. The electrochromic sensor detects a highly toxic compound (chlorpyrifos) with a 100 fM and 1 mM dynamic range. So far, to the best of our knowledge, this is the first work where an electrochromic MIP sensor uses the electrochromic properties of IrOx to detect a certain analyte with high selectivity and sensitivity.

Development of gold nanoparticles biosensor for ultrasensitive diagnosis of foot and mouth disease virus.

BACKGROUND: Nano-PCR is a recent tool that is used in viral diseases diagnosis. The technique depends on the fundamental effects of gold nanoparticles (AuNPs) and is considered a very effective and sensitive tool in the diagnosis of different diseases including viral diseases. Although several techniques are currently available to diagnose foot and mouth disease virus (FMDV), a highly sensitive, highly specific technique is needed for specific diagnosis of the disease. In the present work, a novel AuNPs biosensor has been designed using thiol-linked oligonucleotides that recognize the conserved 3D gene of FMDV. RESULTS: The AuNPs-FMDV biosensor specifically recognizes RNA standards of FMDV, but not that of swine vesicular disease virus (SVDV) isolates. The analytical sensitivity of the AuNPs-FMDV biosensor was 10 copy number RNA standards in RT-PCR and 1 copy number RNA standard in real-time rRT-PCR with a 94.5% efficiency, 0.989 R2, a - 3.544 slope and 100% specificity (no cross-reactivity with SVDV). These findings were confirmed by the specific and sensitive recognition of 31 Egyptian FMDV clinical isolates that represents the three FMDV serotypes (O, A, and SAT2). CONCLUSIONS: The AuNPs-FMDV biosensor presents in this study demonstrates a superior analytical and clinical performance for FMDV diagnosis. In addition, this biosensor has a simple workflow and accelerates epidemiological surveillance, hence, it is qualified as an efficient FMDV diagnosis tool for quarantine stations and farms particularly in FMDV endemic areas.

Nanomaterial-Based Sensing and Biosensing of Phenolic Compounds and Related Antioxidant Capacity in Food.

Polyphenolic compounds (PCs) have received exceptional attention at the end of the past millennium and as much at the beginning of the new one. Undoubtedly, these compounds in foodstuffs provide added value for their well-known health benefits, for their technological role and also marketing. Many efforts have been made to provide simple, effective and user friendly analytical methods for the determination and antioxidant capacity (AOC) evaluation of food polyphenols. In a parallel track, over the last twenty years, nanomaterials (NMs) have made their entry in the analytical chemistry domain; NMs have, in fact, opened new paths for the development of analytical methods with the common aim to improve analytical performance and sustainability, becoming new tools in quality assurance of food and beverages. The aim of this review is to provide information on the most recent developments of new NMs-based tools and strategies for total polyphenols (TP) determination and AOC evaluation in food. In this review optical, electrochemical and bioelectrochemical approaches have been reviewed. The use of nanoparticles, quantum dots, carbon nanomaterials and hybrid materials for the detection of polyphenols is the main subject of the works reported. However, particular attention has been paid to the success of the application in real samples, in addition to the NMs. In particular, the discussion has been focused on methods/devices presenting, in the opinion of the authors, clear advancement in the fields, in terms of simplicity, rapidity and usability. This review aims to demonstrate how the NM-based approaches represent valid alternatives to classical methods for polyphenols analysis, and are mature to be integrated for the rapid quality assessment of food quality in lab or directly in the field.

Chemical Sensors and Biosensors in Italy: A Review of the 2015 Literature.

The contributions of Italian researchers to sensor research in 2015 is reviewed. The analysis of the activities in one year allows one to obtain a snapshot of the Italian scenario capturing the main directions of the research activities. Furthermore, the distance of more than one year makes meaningful the bibliometric analysis of the reviewed papers. The review shows a research community distributed among different scientific disciplines, from chemistry, physics, engineering, and material science, with a strong interest in collaborative works.