Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 27
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
2.
Molecules ; 28(4)2023 Feb 16.
Artigo em Inglês | MEDLINE | ID: mdl-36838853

RESUMO

In recent years, multifunctional inorganic-organic hybrid materials have been widely investigated in order to determine their potential synergetic, antagonist, or independent effects in terms of reactivity. The aim of this study was to design and characterize a new hybrid material by coupling well-known photocatalytic TiO2 nanoparticles with sodium surfactin (SS), a biosurfactant showing high binding affinity for metal cations as well as the ability to interact with and disrupt microorganisms' cell membranes. We used both chemical and colloidal synthesis methodologies and investigated how different TiO2:SS weight ratios affected colloidal, physicochemical, and functional properties. We discovered a clear breaking point between TiO2 and SS single-component trends and identified different ranges of applicability by considering different functional properties such as photocatalytic, heavy metal sorption capacity, and antibacterial properties. At low SS contents, the photocatalytic properties of TiO2 are preserved (conversion of organic dye = 99% after 40 min), and the hybrid system can be used in advanced oxidation processes, taking advantage of the additional antimicrobial SS properties. At high SS contents, the TiO2 photoactivity is inhibited, and the hybrid can be usefully exploited as a UV blocker in cosmetics, avoiding undesired oxidative effects (UV adsorption in the range between 300-400 nm). Around the breaking point (TiO2:SS 1:1), the hybrid material preserves the high surface area of TiO2 (specific surface area around 180 m2/g) and demonstrates NOx depletion of up to 100% in 80 min, together with improved adhesion of hybrid antibacterial coating. The last design demonstrated the best results for the concurrent removal of inorganic, organic, and biological pollutants in water/soil remediation applications.


Assuntos
Nanopartículas , Purificação da Água , Titânio/química , Antibacterianos , Purificação da Água/métodos
3.
Chem Res Toxicol ; 35(6): 963-980, 2022 06 20.
Artigo em Inglês | MEDLINE | ID: mdl-35593714

RESUMO

Dissolution of inhaled engineered nanomaterials (ENM) under physiological conditions is essential to predict the clearance of the ENM from the lungs and to assess their biodurability and the potential effects of released ions. Alveolar macrophage (AM) lysosomes contain a pH 4.5 saline brine with enzymes and other components. Different types of artificial phagolysosomal simulant fluids (PSFs) have been developed for dissolution testing, but the consequence of using different media is not known. In this study, we tested to which extent six fundamentally different PSFs affected the ENM dissolution kinetics and particle size as determined by a validated transmission electron microscopy (TEM) image analysis. Three lysosomal simulant media were consistent with each other and with in vivo clearance. These media predict the quick dissolution of ZnO, the partial dissolution of SiO2, and the very slow dissolution of TiO2. The valid media use either a mix of organic acids (with the total concentration below 0.5 g/L, thereof citric acid below 0.15 g/L) or another organic acid (KH phthalate). For several ENM, including ZnO, BaSO4, and CeO2, all these differences induce only minor modulation of the dissolution rates. Only for TiO2 and SiO2, the interaction with specific organic acids is highly sensitive, probably due to sequestration of the ions, and can lead to wrong predictions when compared to the in vivo behavior. The media that fail on TiO2 and SiO2 dissolution use citric acid at concentrations above 5 g/L (up to 28 g/L). In the present selection of ENM, fluids, and methods, the different lysosomal simulant fluids did not induce changes of particle morphology, except for small changes in SiO2 and BaSO4 particles most likely due to ion dissolution, reprecipitation, and coalescence between neighboring particles. Based on the current evidence, the particle size by TEM analysis is not a sufficiently sensitive analytical method to deduce the rate of ENM dissolution in physiological media. In summary, we recommend the standardization of ENM dissolution testing by one of the three valid lysosomal simulant fluids with determination of the dissolution rate and halftime by the quantification of ions. This recommendation was established for a continuous flow system but may be relevant as well for static (batch) solubility testing.


Assuntos
Nanoestruturas , Óxido de Zinco , Ácido Cítrico , Íons , Lisossomos , Tamanho da Partícula , Padrões de Referência , Dióxido de Silício , Solubilidade
4.
Molecules ; 25(22)2020 Nov 10.
Artigo em Inglês | MEDLINE | ID: mdl-33182578

RESUMO

The photocatalytic oxidation of biomass-derived building blocks such as 5-hydroxymethylfurfural (HMF) is a promising reaction for obtaining valuable chemicals and the efficient long-term storage of solar radiation. In this work, we developed innovative TiO2-based materials capable of base-free HMF photo-oxidation in water using simulated solar irradiation. The materials were prepared by combining microemulsion and spray-freeze drying (SFD), resulting in highly porous systems with a large surface area. The effect of titania/silica composition and the presence of gold-copper alloy nanoparticles on the properties of materials as well as photocatalytic performance were evaluated. Among the lab-synthesized photocatalysts, Ti15Si85 SFD and Au3Cu1/Ti15Si85 SFD achieved the higher conversions, while the best selectivity was observed for Au3Cu1/Ti15Si85 SFD. The tests with radical scavengers for both TiO2-m and Au3Cu1/Ti15Si85 SFD suggested that primary species responsible for the selective photo-oxidation of HMF are photo-generated electrons and/or superoxide radicals.


Assuntos
Emulsões , Liofilização , Furaldeído/análogos & derivados , Oxigênio/química , Energia Solar , Titânio/química , Ligas , Catálise , Cobre/química , Elétrons , Sequestradores de Radicais Livres , Furaldeído/química , Ouro/química , Teste de Materiais , Microscopia Eletrônica de Transmissão , Nanopartículas/química , Oxirredução , Fotoquímica/métodos , Porosidade , Dióxido de Silício , Superóxidos/química , Água/química
5.
Mutagenesis ; 31(5): 511-29, 2016 09.
Artigo em Inglês | MEDLINE | ID: mdl-27056944

RESUMO

The FP7 Sanowork project was aimed to minimise occupational hazard and exposure to engineered nanomaterials (ENM) through the surface modification in order to prevent possible health effects. In this frame, a number of nanoparticles (NP) have been selected, among which zirconium (ZrO2) and titanium (TiO2) dioxide. In this study, we tested ZrO2 NP and TiO2 NP either in their pristine (uncoated) form, or modified with citrate and/or silica on their surface. As benchmark material, Aeroxide® P25 was used. We assessed cytotoxicity, genotoxicity and induction of morphological neoplastic transformation of NP by using a panel of in vitro assays in an established mammalian cell line of murine origin (Balb/3T3). Cell viability was evaluated by means of colony-forming efficiency assay (CFE). Genotoxicity was investigated by cytokinesis-block micronucleus cytome assay (CBMN cyt) and comet assay, and by the use of the restriction enzymes EndoIII and Fpg, oxidatively damaged DNA was detected; finally, the morphological neoplastic transformation of NP was assayed in vitro by cell transformation assay (CTA). Our results show that the surface remediation has not been effective in modifying cyto- and genotoxic properties of the nanomaterials tested; indeed, in the case of remediation of zirconia and titania with citrate, there is a tendency to emphasise the toxic effects. The use of a panel of assays, such as those we have employed, allowing the evaluation of multiple endpoints, including cell transformation, seems particularly advisable especially in the case of long-term exposure effects in the same cell type.


Assuntos
Transformação Celular Neoplásica/induzido quimicamente , Dano ao DNA , Nanopartículas Metálicas/toxicidade , Testes de Mutagenicidade , Titânio/toxicidade , Zircônio/toxicidade , Animais , Linhagem Celular , Sobrevivência Celular , DNA/efeitos dos fármacos , Nanopartículas Metálicas/química , Camundongos , Estresse Oxidativo , Titânio/farmacologia , Zircônio/farmacologia
6.
J Chromatogr A ; 1735: 465331, 2024 Oct 25.
Artigo em Inglês | MEDLINE | ID: mdl-39241403

RESUMO

Understanding the mechanism of toxicity of nanoparticles and their behavior in biological environments is crucial for designing materials with reduced side effects and improved performance. Among the factors influencing nanoparticle behavior in biological environments, the release and bioavailability of potentially toxic metal ions can alter equilibria and cause adverse effects. In this study, we applied two on-line Field-Flow Fractionation (FFF) strategies and compared the results with off-line benchmarking centrifugal ultrafiltration to assess a key descriptor, namely the solubility of zinc oxide (ZnO) nanoparticles. We found that, at the highest nanoparticle concentrations, the nanoparticle-ion ratio quickly reaches equilibrium, and the stability is not significantly affected by the separation technique. However, at lower concentrations, dynamic, non-equilibrium behavior occurs, and the results depend on the method used to separate the solid from the ionic fraction, where FFF yielded a more representative dissolution pattern. To support the (eco)toxicological profiling of the investigated nanoparticles, we generated experimental data on colloidal stability over typical (eco)toxicological assay durations. The Zeta Potential vs pH curves revealed two distinct scenarios typical of surfaces that have undergone significant modification, most likely due to pH-dependent dissolution and re-precipitation of surface groups. Finally, to enhance hazard assessment screening, we investigated ion-dependent toxicity and the effects of exposure to fresh water. Using an in vitro human skin model, we evaluated the cytotoxicity of fresh and aged ZnO nanoparticles (exposed for 72 h in M7), revealing time-dependent, dose-dependent, and nanoparticle-dependent cytotoxicity, with lower toxicity observed in the case of aged samples.


Assuntos
Óxido de Zinco , Óxido de Zinco/química , Óxido de Zinco/toxicidade , Humanos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/toxicidade , Fracionamento por Campo e Fluxo/métodos , Solubilidade , Concentração de Íons de Hidrogênio , Ultrafiltração/métodos , Nanopartículas/química , Nanopartículas/toxicidade
7.
Comput Struct Biotechnol J ; 25: 20-33, 2024 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-38444982

RESUMO

The synthesis of silver nanoparticles with controlled physicochemical properties is essential for governing their intended functionalities and safety profiles. However, synthesis process involves multiple parameters that could influence the resulting properties. This challenge could be addressed with the development of predictive models that forecast endpoints based on key synthesis parameters. In this study, we manually extracted synthesis-related data from the literature and leveraged various machine learning algorithms. Data extraction included parameters such as reactant concentrations, experimental conditions, as well as physicochemical properties. The antibacterial efficiencies and toxicological profiles of the synthesized nanoparticles were also extracted. In a second step, based on data completeness, we employed regression algorithms to establish relationships between synthesis parameters and desired endpoints and to build predictive models. The models for core size and antibacterial efficiency were trained and validated using a cross-validation approach. Finally, the features' impact was evaluated via Shapley values to provide insights into the contribution of features to the predictions. Factors such as synthesis duration, scale of synthesis and the choice of capping agents emerged as the most significant predictors. This study demonstrated the potential of machine learning to aid in the rational design of synthesis process and paves the way for the safe-by-design principles development by providing insights into the optimization of the synthesis process to achieve the desired properties. Finally, this study provides a valuable dataset compiled from literature sources with significant time and effort from multiple researchers. Access to such datasets notably aids computational advances in the field of nanotechnology.

8.
Nanotoxicology ; 16(2): 135-151, 2022 03.
Artigo em Inglês | MEDLINE | ID: mdl-35286814

RESUMO

Fitting theoretical models to experimental data for dose-response screenings of nanoparticles yields values of several hazard metrics that can support risk management. In this paper, we describe a Bayesian approach to the analysis of dose-response data for nanoparticles that takes into account multiple sources of uncertainty. Specifically, we develop a Bayesian model for the analysis of data for the cytotoxicity of ZnO nanoparticles that follow the log-logistic equation. This model reproduces the unequal variance across doses observed in the experimental data, incorporates information about the sensitivity of the cytotoxicity assay used (i.e. resazurin), and complements experimental data with historical information about the system. The model determines probability distributions for multiple values of toxicity potency (EC50), and exponential decay (the slope s); these distributions provide a direct measure of uncertainty in terms of probabilistic credibility intervals. By substituting these distributions in the log-logistic equation, we determine upper and lower limits of the benchmark dose (BMD), corresponding to upper and lower limits of credibility intervals with 95% probability given the experimental data, multiple sources of uncertainty, and historical information. In view of a reduction of costs and time of dose-response screenings, we use the Bayesian model for the cytotoxicity of ZnO nanoparticles to identify the experimental design that uses the minimum number of data while reducing uncertainty in the estimation of both fitting parameters and BMD.


Assuntos
Nanopartículas , Óxido de Zinco , Teorema de Bayes , Análise de Dados , Relação Dose-Resposta a Droga , Nanopartículas/toxicidade , Medição de Risco , Incerteza , Óxido de Zinco/toxicidade
9.
Front Toxicol ; 4: 918633, 2022.
Artigo em Inglês | MEDLINE | ID: mdl-36185318

RESUMO

The understanding of the engineered nanomaterials (NMs) potential interaction with tissue barriers is important to predict their accumulation in cells. Herein, the fate, e.g., cellular uptake/adsorption at the cell membrane and translocation, of NMs with different physico-chemical properties across an A549 lung epithelial tissue barrier, cultured on permeable transwell inserts, were evaluated. We assessed the fate of five different NMs, known to be partially soluble, bio-persistent passive and bio-persistent active. Single exposure measurements using 100 µg/ml were performed for barium sulfate (BaSO4), cerium dioxide (CeO2), titanium dioxide (TiO2), and zinc oxide (ZnO) NMs and non-nanosized crystalline silica (DQ12). Elemental distribution of the materials in different compartments was measured after 24 and 80 h, e.g., apical, apical wash, intracellular and basal, using inductively coupled plasma optical emission spectrometry. BaSO4, CeO2, and TiO2 were mainly detected in the apical and apical wash fraction, whereas for ZnO a significant fraction was detected in the basal compartment. For DQ12 the major fraction was found intracellularly. The content in the cellular fraction decreased from 24 to 80 h incubation for all materials. Repeated exposure measurements were performed exposing the cells on four subsequent days to 25 µg/ml. After 80 h BaSO4, CeO2, and TiO2 NMs were again mainly detected in the apical fraction, ZnO NMs in the apical and basal fraction, while for DQ12 a significant concentration was measured in the cell fraction. Interestingly the cellular fraction was in a similar range for both exposure scenarios with one exception, i.e., ZnO NMs, suggesting a potential different behavior for this material under single exposure and repeated exposure conditions. However, we observed for all the NMs, a decrease of the amount detected in the cellular fraction within time, indicating NMs loss by cell division, exocytosis and/or possible dissolution in lysosomes. Overall, the distribution of NMs in the compartments investigated depends on their composition, as for inert and stable NMs the major fraction was detected in the apical and apical wash fraction, whereas for partially soluble NMs apical and basal fractions were almost similar and DQ12 could mainly be found in the cellular fraction.

10.
Toxics ; 10(9)2022 Aug 27.
Artigo em Inglês | MEDLINE | ID: mdl-36136463

RESUMO

Effective particle density is a key parameter for assessing inhalation exposure of engineered NPs in occupational environments. In this paper, particle density measurements were carried out using two different techniques: one based on the ratio between mass and volumetric particle concentrations; the other one based on the ratio between aerodynamic and geometric particle diameter. These different approaches were applied to both field- and laboratory-scale atomization processes where the two target NPs (N-doped TiO2, TiO2N and AgNPs capped with a quaternized hydroxyethylcellulose, AgHEC) were generated. Spray tests using TiO2N were observed to release more and bigger particles than tests with AgHEC, as indicated by the measured particle mass concentrations and volumes. Our findings give an effective density of TiO2N particle to be in a similar range between field and laboratory measurements (1.8 ± 0.5 g/cm3); while AgHEC particle density showed wide variations (3.0 ± 0.5 g/cm3 and 1.2 + 0.1 g/cm3 for field and laboratory campaigns, respectively). This finding leads to speculation regarding the composition of particles emitted because atomized particle fragments may contain different Ag-to-HEC ratios, leading to different density values. A further uncertainty factor is probably related to low process emissions, making the subtraction of background concentrations from AgHEC process emissions unreliable.

11.
Nanomaterials (Basel) ; 12(3)2022 Jan 18.
Artigo em Inglês | MEDLINE | ID: mdl-35159658

RESUMO

Industrial spray coating processes are known to produce excellent coatings on large surfaces and are thus often used for in-line production. However, they could be one of the most critical sources of worker exposure to ultrafine particles (UFPs). A monitoring campaign at the Witek s.r.l. (Florence, Italy) was deployed to characterize the release of TiO2 NPs doped with nitrogen (TiO2-N) and Ag capped with hydroxyethyl cellulose (AgHEC) during automatic industrial spray-coating of polymethyl methacrylate (PMMA) and polyester. Aerosol particles were characterized inside the spray chamber at near field (NF) and far field (FF) locations using on-line and off-line instruments. Results showed that TiO2-N suspension produced higher particle number concentrations than AgHEC in the size range 0.3-1 µm (on average 1.9 102 p/cm3 and 2.5 101 p/cm3, respectively) after background removing. At FF, especially at worst case scenario (4 nozzles, 800 mL/min flow rate) for TiO2-N, the spray spikes were correlated with NF, with an observed time lag of 1 minute corresponding to a diffusion speed of 0.1 m/s. The averaged ratio between particles mass concentrations in the NF position and inside the spray chamber was 1.7% and 1.5% for TiO2-N and for AgHEC suspensions, respectively. The released particles' number concentration of TiO2-N in the size particles range 0.3-1 µm was comparable for both PMMA and polyester substrates, about 1.5 and 1.6 102 p/cm3. In the size range 0.01-30 µm, the aerosol number concentration at NF for both suspensions was lower than the nano reference values (NRVs) of 16·103 p/cm-3.

12.
Nanoscale ; 14(12): 4690-4704, 2022 Mar 24.
Artigo em Inglês | MEDLINE | ID: mdl-35262538

RESUMO

We describe the outcome of a large international interlaboratory study of the measurement of particle number concentration of colloidal nanoparticles, project 10 of the technical working area 34, "Nanoparticle Populations" of the Versailles Project on Advanced Materials and Standards (VAMAS). A total of 50 laboratories delivered results for the number concentration of 30 nm gold colloidal nanoparticles measured using particle tracking analysis (PTA), single particle inductively coupled plasma mass spectrometry (spICP-MS), ultraviolet-visible (UV-Vis) light spectroscopy, centrifugal liquid sedimentation (CLS) and small angle X-ray scattering (SAXS). The study provides quantitative data to evaluate the repeatability of these methods and their reproducibility in the measurement of number concentration of model nanoparticle systems following a common measurement protocol. We find that the population-averaging methods of SAXS, CLS and UV-Vis have high measurement repeatability and reproducibility, with between-labs variability of 2.6%, 11% and 1.4% respectively. However, results may be significantly biased for reasons including inaccurate material properties whose values are used to compute the number concentration. Particle-counting method results are less reproducibile than population-averaging methods, with measured between-labs variability of 68% and 46% for PTA and spICP-MS respectively. This study provides the stakeholder community with important comparative data to underpin measurement reproducibility and method validation for number concentration of nanoparticles.

13.
Nanotoxicology ; 15(8): 1005-1015, 2021 10.
Artigo em Inglês | MEDLINE | ID: mdl-34612156

RESUMO

Children are potentially exposed to products that contain nanoparticles (NPs). In particular, silver NPs are commonly present both in products used by and around children, primarily due to their antibacterial properties. However, very few data are available regarding the ability of silver NPs to penetrate through the oral mucosa in children. In the present work, we used baby porcine buccal mucosa mounted on vertical Franz diffusion cells, as an in vitro model to investigate penetration of silver NPs (19 ± 5 nm). Permeability experiments were performed using pristine physiologically-relevant saline solution in the receiver chamber and known concentrations of NPs or ions in the donor chamber; conditions mimicked the in vivo physiological pH conditions. After physicochemical characterization of silver nanoparticles dispersed in physiological solution, we evaluated the passage of ions and NPs through the mucosa, using single particle inductively coupled plasma mass spectrometry. A flux of 4.1 ± 1.7 ng cm-2 min-1 and a lag time of 159 ± 17 min were observed through mucosa exposed to silver nanoparticles. The latter suggests nanoparticle penetration through the baby porcine mucosa and release Ag+ ions in the receptor fluid, as confirmed by computational model. Due to physiological similarity between human and pig membranes it is reasonable to assume that a trans-oral mucosa penetration could occur in children upon contact with silver nanoparticles.


Assuntos
Nanopartículas Metálicas , Prata , Animais , Nanopartículas Metálicas/toxicidade , Mucosa , Tamanho da Partícula , Permeabilidade , Análise Espectral , Suínos
14.
J Appl Polym Sci ; 138(46): 51380, 2021 Dec 10.
Artigo em Inglês | MEDLINE | ID: mdl-34511635

RESUMO

In response to the nowadays battle against SARS-CoV-2, we designed a new class of high performant filter media suitable to advance the facemask technology and provide new efficient widespread solutions against virus propagation. By means of the electrospinning technology we developed filter media based on polyvinyl alcohol (PVA) nanofibers doped with AgNPs combining three main performance requirements: high air filtration efficiency to capture nanometer-size particles, low airflow resistance essential to ensure breathability and antimicrobial activity to inactivate aerosolized microorganisms. PVA/AgNPs electrospun nanofibers were produced by electrospinning the dispersion of colloidal silver into the PVA water solution. A widespread physicochemical characterization was addressed to the Ag colloidal suspension. The key functional performances of the electrospun nanofibers were proven by water stability, antibacterial activity, and filtration efficiency and pressure drop measurements performed under conditions representative of facemasks. We assessed a total bacterial depletion associated to a filtering efficiency towards nano-aerosolized particles of 97.7% higher than required by the EN149 standard and a pressure drop in line with FFP1 and FFP2 masks, even at the highest filtration velocity. Such results pave the way to the application of PVA/AgNPs electrospun nanofibers in facemasks as advanced filtering media for protecting against airborne microorganisms.

15.
Front Bioeng Biotechnol ; 9: 805096, 2021.
Artigo em Inglês | MEDLINE | ID: mdl-35155410

RESUMO

The novel chemical strategy for sustainability calls for a Sustainable and Safe-by-Design (SSbD) holistic approach to achieve protection of public health and the environment, industrial relevance, societal empowerment, and regulatory preparedness. Based on it, the ASINA project expands a data-driven Management Methodology (ASINA-SMM) capturing quality, safety, and sustainability criteria across the Nano-Enabled Products' (NEPs) life cycle. We base the development of this methodology through value chains of highly representative classes of NEPs in the market, namely, (i) self-cleaning/air-purifying/antimicrobial coatings and (ii) nano-structured capsules delivering active phases in cosmetics. These NEPs improve environmental quality and human health/wellness and have innovative competence to industrial sectors such as healthcare, textiles, cosmetics, and medical devices. The purpose of this article is to visually exhibit and explain the ASINA approach, which allows identifying, combining, and addressing the following pillars: environmental impact, techno-economic performance, functionality, and human and environmental safety when developing novel NEPs, at an early stage. A metamodel supports the above by utilizing quality data collected throughout the NEPs' life cycle, for maximization of functionality (to meet stakeholders needs) and nano-safety (regulatory obligations) and for the minimization of costs (to meet business requirements) and environmental impacts (to achieve sustainability). Furthermore, ASINA explores digitalization opportunities (digital twins) to speed the nano-industry translation into automatic progress towards economic, social, environmental, and governance sustainability.

16.
Nanomaterials (Basel) ; 11(12)2021 Nov 23.
Artigo em Inglês | MEDLINE | ID: mdl-34947513

RESUMO

An automatic lab-scaled spray-coating machine was used to deposit Ag nanoparticles (AgNPs) on textile to create antibacterial fabric. The spray process was monitored for the dual purpose of (1) optimizing the process by maximizing silver deposition and minimizing fluid waste, thereby reducing suspension consumption and (2) assessing AgNPs release. Monitoring measurements were carried out at two locations: inside and outside the spray chamber (far field). We calculated the deposition efficiency (E), finding it to be enhanced by increasing the spray pressure from 1 to 1.5 bar, but to be lowered when the number of operating sprays was increased, demonstrating the multiple spray system to be less efficient than a single spray. Far-field AgNPs emission showed a particle concentration increase of less than 10% as compared to the background level. This finding suggests that under our experimental conditions, our spray-coating process is not a critical source of worker exposure.

17.
Nanomaterials (Basel) ; 10(6)2020 May 27.
Artigo em Inglês | MEDLINE | ID: mdl-32471044

RESUMO

This study was aimed at the production and characterization of coated cotton textiles with luminescent ceramic nanophases doped with cationic Ir(III) tetrazole complexes. We confirmed that SiO2 nanoparticles (NPs) do not affect the phosphorescent properties of the complexes that maintain their emission (610 and 490 nm). For the first time we transferred the luminescence feature from nanosol to textile surface, highlighting the advantages of using nanosilica as an encapsulating and stabilizing matrix. The optimized Ir@SiO2 suspensions were homogenously applied onto the cotton surface by dip-pad-dry-cure technique, as proved by the 2p-fluorescence microscope analysis. Once we verified the self-marker properties of the Ir(III) complex, we observed an excellent washing fastness of the coating with a very limited release. SiO2 in the washing water was quantified at maximum around 1.5 wt% and Ir below the inductively coupled plasma optical emission spectrometry (ICP-OES) detection limit of 1 ppm. A Franz cell test was used to evaluate any possible ex-vivo uptake of Ir@SiO2 nanoparticles across human skin tissues, showing that epidermis and dermis stop over 99% of Ir, implying a reduced impact on human health. The light-induced antimicrobial potential of the Ir@SiO2 were assessed toward both Gram(-) and Gram(+) bacteria. The results encouraged further developments of such functional textiles coated by self-markers and antibacterial active nanophases.

18.
Materials (Basel) ; 13(20)2020 Oct 13.
Artigo em Inglês | MEDLINE | ID: mdl-33066064

RESUMO

The convergence of nanotechnology and biotechnology has led to substantial advancements in nano-biomaterials (NBMs) used in medical devices (MD) and advanced therapy medicinal products (ATMP). However, there are concerns that applications of NBMs for medical diagnostics, therapeutics and regenerative medicine could also pose health and/or environmental risks since the current understanding of their safety is incomplete. A scientific strategy is therefore needed to assess all risks emerging along the life cycles of these products. To address this need, an overarching risk management framework (RMF) for NBMs used in MD and ATMP is presented in this paper, as a result of a collaborative effort of a team of experts within the EU Project BIORIMA and with relevant inputs from external stakeholders. The framework, in line with current regulatory requirements, is designed according to state-of-the-art approaches to risk assessment and management of both nanomaterials and biomaterials. The collection/generation of data for NBMs safety assessment is based on innovative integrated approaches to testing and assessment (IATA). The framework can support stakeholders (e.g., manufacturers, regulators, consultants) in systematically assessing not only patient safety but also occupational (including healthcare workers) and environmental risks along the life cycle of MD and ATMP. The outputs of the framework enable the user to identify suitable safe(r)-by-design alternatives and/or risk management measures and to compare the risks of NBMs to their (clinical) benefits, based on efficacy, quality and cost criteria, in order to inform robust risk management decision-making.

19.
J Colloid Interface Sci ; 546: 174-183, 2019 Jun 15.
Artigo em Inglês | MEDLINE | ID: mdl-30913491

RESUMO

A strategy for the design of cotton flame retardant coatings is described, exploiting the natural intumescent formulation of nucleic acids, the intrinsic thermal inertia of TiO2 ceramic phase and the strong affinity that TiO2 nanoparticles shows for amphiphilic biomolecules (e.g. proteins, nucleic acids) and hydrophilic substrates. Two different self-assembled TiO2@DNA systems are obtained by mixing two opposite charged TiO2 nanoparticles suspensions with DNA solution. The colloidal behavior of separate and mixed phases was investigated, as well as the morphological, chemical structure and thermal properties of resulting coatings, in order to make some hypothesis on the observed synergic effects. Scanning electron microscopy (SEM) and Attenuated Total Reflectance (ATR) spectroscopy demonstrated the homogeneous distribution of nano-TiO2@DNA based coatings on the treated fabrics. The washing fastness tests evidenced the highly improved performance of hybrid coatings if compared with DNA alone. The flammability and cone calorimetry test results confirmed this positive synergy that resulted quite effective in slowing down (or even blocking) the propagation of a flame within the treated substrates and in improving the resistance of the fabrics to the applied heat flux, these latter leaving increased residues at the end of the test.


Assuntos
Fibra de Algodão , DNA/química , Retardadores de Chama , Nanopartículas/química , Titânio/química , Concentração de Íons de Hidrogênio , Microscopia Eletrônica de Varredura , Tamanho da Partícula , Propriedades de Superfície
20.
J Nanosci Nanotechnol ; 8(4): 1979-88, 2008 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-18572602

RESUMO

Nano-sized ceramic inks suitable for ink-jet printing have been developed for the four-colours CMYK (cyan, magenta, yellow, black) process. Nano-inks of different pigment composition (Co(1-x)O, Au(0), Ti(1-x-y)Sb(x)Cr(y)O2, CoFe2O4) have been prepared with various solid loadings and their chemicophysical properties (particle size, viscosity, surface tension, zeta-potential) were tailored for the ink-jet application. The pigment particle size is in the 20-80 nm range. All these nano-suspensions are stable for long time (i.e., several months) due to either electrostatic (high zeta-potential values) or steric stabilization mechanisms. Both nanometric size and high stability avoid problems of nozzle clogging from particles agglomeration and settling. Nano-inks have a Newtonian behaviour with relatively low viscosities at room temperature. More concentrated inks fulfil the viscosity requirement of ink-jet applications (i.e., < 35 mPa x s) for printing temperatures in between 30 and 70 degrees C. Surface tension constraints for ink-jet printing are fulfilled by nano-inks, being in the 35-45 mN x m(-1) range. The nano-sized inks investigated behave satisfactorily in preliminary printing tests on several unfired industrial ceramic tiles, developing saturated colours in a wide range of firing temperatures (1000-1200 degrees C).


Assuntos
Cerâmica/química , Periféricos de Computador , Cristalização/métodos , Tinta , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Impressão/métodos , Substâncias Macromoleculares/química , Teste de Materiais , Microfluídica/instrumentação , Microfluídica/métodos , Conformação Molecular , Nanotecnologia/instrumentação , Nanotecnologia/métodos , Tamanho da Partícula , Impressão/instrumentação , Propriedades de Superfície
SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa