RESUMO
We used a GIS analysis of sodium and chloride concentrations in private water wells in a southeastern New York township to describe the pattern of distribution of road salt in aquifers tapped for drinking water. The primary source of road salt was sodium chloride, and sodium and chloride concentrations were significantly correlated ( = 0.80, < 0.01). Chloride concentrations in wells increased as the percentage of impervious surface cover (ISC) within a 250-m radius around wells increased ( = 0.87, < 0.01) and declined with increasing distance to the nearest road ( = 0.76, < 0.01). Wells that were located lower in elevation than the nearest road had higher concentrations of chloride than wells that were higher than the nearest road, but this occurred only when the nearest road was >30 m from the wells ( < 0.01). Chloride concentrations were not affected by well depth or adjacent road type (major or minor roads). Surface geology and hydrologic soil class had significant effects ( < 0.01) on chloride concentrations in wells, with porous surface geology types and well-drained soils having higher concentrations; these effects may be confounded by the fact that ISC was more likely to occur on these permeable surface geology and soil types. Hot and cold spot analysis revealed substantial unevenness in chloride concentrations. Results for sodium were similar to those for chloride. Overall, these results indicate that road salt contamination of groundwater is unevenly distributed and is affected by landscape factors that can be used to guide well testing and best management practices of deicing salt distribution.