Determination of L-selectin in blood plasma using DNA aptamer-based surface-enhanced Raman spectroscopy assay.

In the human body, tumor cell occurrence can be indirectly monitored using the L-selectin concentration in the blood, since selectin ligands are present on the surface of tumor cells, and with tumor progression, a decrease in L-selectin levels can be expected and observed. In this study, we present a selective DNA-based surface-enhanced Raman spectroscopy (SERS) assay for the detection and determination of L-selectin in biological samples. Two calibration curves (linear in the 40-190 ng mL-1 region and exponential in the 40-500 ng mL-1 region) are fitted to the obtained SERS experimental data, i.e., the ratio of I732/I1334 band intensities (LOQ = 46 ng mL-1). Calculated determination coefficients are found to be R2 = 0.997 for the linear region of the calibration curve and R2 = 0.977 for the exponential region. Moreover, we demonstrate very good selectivity of the assay even in the presence of P- and E-selectin in a sample containing L-selectin. With our SERS assay, the L-selectin concentration in biological samples can be estimated directly from the calibration curves.

Prevention of SARS-COV-2 coronavirus spread at the Auschwitz-Birkenau State Museum in Poland. The most visited Memorial site in the world during the COVID-19 pandemic.

INTRODUCTION: At the Auschwitz-Birkenau State Museum (A-BSM) actions have been undertaken to effectively protect employees and minimise risk of SARS-CoV-2 coronavirus spreading from the beginning of the COVID-19 epidemic. AIM OF THE ARTICLE: The aim was to present the actions, instructions and procedures introduced at the A-BSM to provide information how to deal with pandemic caused by the SARS-CoV-2 coronavirus in institutions taking care of cultural heritage before and after closure of the Museum for visitors and after reopening. MATERIALS AND METHODS: The described activities were developed at the Museum by a specially established Expert Team. RESULTS: Groups of employees and places in which they were most exposed to contact with visitors and, as a consequence, at the highest risk of getting infected, were characterised. The employees were provided with personal protective equipment, and at the Museum site, devices essential for maintaining the microbiological cleanliness of the rooms, were placed. In the next stage, instructions and procedures for particular groups of employees were prepared. Visitors were educated about the need of taking precautions and were allowed to disinfect in several places at the Memorial Site. Steps to reduce attendance at this time has also been taken. Procedures for employees of the A-BSM were developed in such way that they can also be used after reopening of the Museum for visitors. CONCLUSIONS: The actions which ensured the microbiological safety of the A-BSM employees, brought satisfying results. In more than 21 days after closing of the Museum for visitors, no cases of SARS-CoV-2 infection or COVID-19 were found among employees, despite a very high threat.

Assessment of the Steering Precision of a Hydrographic Unmanned Surface Vessel (USV) along Sounding Profiles Using a Low-Cost Multi-Global Navigation Satellite System (GNSS) Receiver Supported Autopilot.

The performance of bathymetric measurements by traditional methods (using manned vessels) in ultra-shallow waters, i.e., lakes, rivers, and sea beaches with a depth of less than 1 m, is often difficult or, in many cases, impossible due to problems related to safe vessel maneuvering. For this reason, the use of shallow draft hydrographic Unmanned Surface Vessels (USV) appears to provide a promising alternative method for performing such bathymetric measurements. This article describes the modernisation of a USV to switch from manual to automatic mode, and presents a preliminary study aimed at assessing the suitability of a popular autopilot commonly used in Unmanned Aerial Vehicles (UAV), and a low-cost multi-Global Navigation Satellite System (GNSS) receiver cooperating with it, for performing bathymetric measurements in automated mode, which involves independent movement along a specified route (hydrographic sounding profiles). The cross track error (XTE) variable, i.e., the distance determined between a USV's position and the sounding profile, measured transversely to the course, was adopted as the measure of automatic control precision. Moreover, the XTE value was statistically assessed in the publication.

Safe-by-Design Ligand-Coated ZnO Nanocrystals Engineered by an Organometallic Approach: Unique Physicochemical Properties and Low Toxicity toward Lung Cells.

The unique physicochemical properties and biocompatibility of zinc oxide nanocrystals (ZnO NCs) are strongly dependent on the nanocrystal/ligand interface, which is largely determined by synthetic procedures. Stable ZnO NCs coated with a densely packed shell of 2-(2-methoxyethoxy)acetate ligands, which act as miniPEG prototypes, with average core size and hydrodynamic diameter of 4-5 and about 12 nm, respectively, were prepared by an organometallic self-supporting approach, fully characterized, and used as a model system for biological studies. The ZnO NCs from the one-pot, self-supporting organometallic procedure exhibit unique physicochemical properties such as relatively high quantum yield (up to 28 %), ultralong photoluminescence decay (up to 2.1 µs), and EPR silence under standard conditions. The cytotoxicity of the resulting ZnO NCs toward normal (MRC-5) and cancer (A549) human lung cell lines was tested by MTT assay, which demonstrated that these brightly luminescent, quantum-sized ZnO NCs have a low negative impact on mammalian cell lines. These results substantiate that the self-supporting organometallic approach is a highly promising method to obtain high-quality, nontoxic, ligand-coated ZnO NCs with prospective biomedical applications.

An internal charge transfer-dependent solvent effect in V-shaped azacyanines.

New V-shaped non-centrosymmetric dyes, possessing a strongly electron-deficient azacyanine core, have been synthesized based on a straightforward two-step approach. The key step in this synthesis involves palladium-catalysed cross-coupling of dibromo-N,N'-methylene-2,2'-azapyridinocyanines with arylacetylenes. The resulting strongly polarized π-expanded heterocycles exhibit green to orange fluorescence and they strongly respond to changes in solvent polarity. We demonstrate that differently electron-donating peripheral groups have a significant influence on the internal charge transfer, hence on the solvent effect and fluorescence quantum yield. TD-DFT calculations confirm that, in contrast to the previously studied bis(styryl)azacyanines, the proximity of S1 and T2 states calculated for compounds bearing two 4-N,N-dimethylaminophenylethynyl moieties establishes good conditions for efficient intersystem crossing and is responsible for its low fluorescence quantum yield. Non-linear properties have also been determined for new azacyanines and the results show that depending on peripheral groups, the synthesized dyes exhibit small to large two-photon absorption cross sections reaching 4000 GM.

The optical properties and quantum chemical calculations of thienyl and furyl derivatives of pyrene.

A detailed electrochemical, photophysical and theoretical study is presented for various new thienyl and furyl derivatives of pyrene. Their optical properties are described based on UV-VIS absorption and both steady-state and time-resolved fluorescence spectroscopy. DFT and TDDFT calculations are also presented to support experimental data. The calculations results show that HOMO-LUMO orbitals are delocalized uniformly between aromatic core and aryl substituents. Good electrochemical stability of thienyl and furyl hybrids of pyrene confirm their potential application for light emitting electrochemical cells or spintronics mainly due to their beneficial optical and charge transport properties in electrochromic devices. In order to demonstrate this potential, an OLED device is presented. Synthesized compounds included in this OLED device both facilitate electron transport and act as a light emitting layer.

Ion-selective formation of a guanine quadruplex on DNA origami structures.

DNA origami nanostructures are a versatile tool that can be used to arrange functionalities with high local control to study molecular processes at a single-molecule level. Here, we demonstrate that DNA origami substrates can be used to suppress the formation of specific guanine (G) quadruplex structures from telomeric DNA. The folding of telomeres into G-quadruplex structures in the presence of monovalent cations (e.g. Na(+) and K(+)) is currently used for the detection of K(+) ions, however, with insufficient selectivity towards Na(+). By means of FRET between two suitable dyes attached to the 3'- and 5'-ends of telomeric DNA we demonstrate that the formation of G-quadruplexes on DNA origami templates in the presence of sodium ions is suppressed due to steric hindrance. Hence, telomeric DNA attached to DNA origami structures represents a highly sensitive and selective detection tool for potassium ions even in the presence of high concentrations of sodium ions.

Photophysical evaluation of a new functional terbium complex in FRET-based time-resolved homogenous fluoroassays.

A new functional luminescent lanthanide complex (LLC) has been synthesized with terbium as a central lanthanide ion and biotin as a functional moiety. Unlike in typical lanthanide complexes assembled via carboxylic moieties, in the presented complex, four phosphate groups are chelating the central lanthanide ion. This special chemical assembly enhances the complex stability in phosphate buffers conventionally used in biochemistry. The complex synthesis strategy and photophysical properties are described as well as the performance in time-resolved Förster Resonance Energy Transfer (FRET) assays. In those assays, this biotin-LLC transferred energy either to acceptor organic dyes (Cy5 or AF680) labelled on streptavidin or to quantum dots (QD655 or QD705) surface-functionalised with streptavidins. The permanent spatial donor-acceptor proximity is assured through strong and stable biotin-streptavidin binding. The energy transfer is evidenced from the quenching observed in donor emission and from a decrease in donor luminescence decay, both associated with simultaneous increase in acceptor intensity and in the decay time. The dye-based assays are realised in TRIS and in PBS, whereas QD-based systems are studied in borate buffer. The delayed emission analysis allows for quantifying the recognition process and for auto-fluorescence-free detection, which is particularly relevant for application in bioanalysis. In accordance with Förster theory, Förster-radii (R0) were found to be around 60 Å for organic dyes and around 105 Å for QDs. The FRET efficiency (η) reached 80% and 25% for dye and QD acceptors, respectively. Physical donor-acceptor distances (r) have been determined in the range 45-60 Å for organic dye acceptors, while for acceptor QDs between 120 Å and 145 Å. This newly synthesised biotin-LLC extends the class of highly sensitive analytical tools to be applied in the bioanalytical methods such as time-resolved fluoroimmunoassays (TR-FIA), luminescent imaging and biosensing.

Interaction of photosensitive surfactant with DNA and poly acrylic acid.

In this paper, we investigate interactions and phase transitions in polyelectrolyte-surfactant complexes formed between a cationic azobenzene-containing surfactant and two types of polyelectrolytes: natural (DNA) or synthetic (PAA: poly acrylic acid). The construction of a phase diagram allowed distancing between four major phases: extended coil conformation, colloidally stable compacted globules, colloidal instability range, and surfactant-stabilized compact state. Investigation on the complexes' properties in different phases and under irradiation with UV light provides information about the role of the surfactant's hydrophobic trans isomers both in the formation and destruction of DNA and PAA globules as well as in their colloidal stabilization. The trans isomer shows much stronger affinity to the polyelectrolytes than the hydrophilic cis counterpart. There is no need for complete compensation of the polyelectrolyte charges to reach the complete compaction. On contrary to the findings previously reported in the literature, we demonstrate - for the first time - complete polyelectrolyte compaction which occurs already at 20% of DNA (and at 50% of PAA) charge compensation. The trans isomer plays the main role in the compaction. The aggregation between azobenzene units in the photosensitive surfactant is a driving force of this process. The decompaction can be realized during UV light irradiation and is strongly influenced by the interplay between surfactant-surfactant and surfactant-DNA interactions in the compacted globules.

Protein quantification using resonance energy transfer between donor nanoparticles and acceptor quantum dots.

A homogeneous time-resolved luminescence resonance energy transfer (TR-LRET) assay has been developed to quantify proteins. The competitive assay is based on resonance energy transfer (RET) between two luminescent nanosized particles. Polystyrene nanoparticles loaded with Eu(3+) chelates (EuNPs) act as donors, while protein-coated quantum dots (QDs), either CdSe/ZnS emitting at 655 nm (QD655-strep) or CdSeTe/ZnS with emission wavelength at 705 nm (QD705-strep), are acceptors. In the absence of analyte protein, in our case bovine serum albumin (BSA), the protein-coated QDs bind nonspecifically to the EuNPs, leading to RET. In the presence of analyte proteins, the binding of the QDs to the EuNPs is prevented and the RET signal decreases. RET from the EuNPs to the QDs was confirmed and characterized with steady-state and time-resolved luminescence spectroscopy. In accordance with the Förster theory, the approximate average donor-acceptor distance is around 15 nm at RET efficiencies, equal to 15% for QD655 and 13% for QD705 acceptor, respectively. The limits of detection are below 10 ng of BSA with less than a 10% average coefficient of variation. The assay sensitivity is improved, when compared to the most sensitive commercial methods. The presented mix-and-measure method has potential to be implemented into routine protein quantification in biological laboratories.

Optimization of the Process of Eliminating Microorganisms Harmful to Human Health and Threatening Objects Isolated from Historical Materials from the Auschwitz-Birkenau State Museum in Poland (A-BSM) Collection with the Use of Ethanol in the Form of Mist.

The aim of the study was to assess the biocidal effectiveness and the effect of 80% and 90% ethanol applied in the form of mist on the surface of textile materials from historical A-BSM objects. The microorganisms used for the tests, namely, Cladosporium cladosporioides, Aspergillus niger and Penicillium chrysogenum, were isolated from the surface of textile objects in the A-BSM. Bacillus subtilis, Staphylococcus aureus, Aspergillus flavus and Aspergillus niger were also used from the American Type Culture Collection (ATCC). Fabric samples were inoculated with microorganisms at a concentration of 105-106 CFU/ml. Ethanol in the form of mist was applied in concentrations of 80% and 90%. Airbrushes VL 0819 and VE 0707 were used for this purpose, where the pressure was 0.2 MPa and the PA HEAD VLH-5 nozzle with a tip of 1.05 mm in diameter was used. In order to achieve more effective disinfection after applying the ethanol mist, samples were stored in PE foil in the conditions of 21 °C ± 1 °C for 22 ± 1 h. After applying the ethanol mist, changes in the properties of the materials were assessed using scanning electron microscopy (SEM). The reduction in the number of microorganisms on modern cotton fabric after the use of ethanol in the form of mist at concentrations of 80% and 90% ranged from 93.27% to 99.91% for fungi and from 94.96% to 100% for bacteria, except for 74.24% for B. subtillis. On the historical fabric, after the time of application of 90% ethanol was shortened to 4 s, the microorganisms were reduced by over 99.93% and S. aureus was completely eliminated. After applying the tested disinfection technique, no changes in fiber morphology were observed on the surface of the model and historical cotton.

Molecular recognition of the antiretroviral drug abacavir: towards the development of a novel carbazole-based fluorosensor.

Due to their optical and electro-conductive attributes, carbazole derivatives are interesting materials for a large range of biosensor applications. In this study, we present the synthesis routes and fluorescence evaluation of newly designed carbazole fluorosensors that, by modification with uracil, have a special affinity for antiretroviral drugs via either Watson-Crick or Hoogsteen base pairing. To an N-octylcarbazole-uracil compound, four different groups were attached, namely thiophene, furane, ethylenedioxythiophene, and another uracil; yielding four different derivatives. Photophysical properties of these newly obtained derivatives are described, as are their interactions with the reverse transcriptase inhibitors such as abacavir, zidovudine, lamivudine and didanosine. The influence of each analyte on biosensor fluorescence was assessed on the basis of the Stern-Volmer equation and represented by Stern-Volmer constants. Consequently we have demonstrated that these structures based on carbazole, with a uracil group, may be successfully incorporated into alternative carbazole derivatives to form biosensors for the molecular recognition of antiretroviral drugs.

Sensitive and selective fluorescence detection of guanosine nucleotides by nanoparticles conjugated with a naphthyridine receptor.

Novel fluorescent nanosensors, based on a naphthyridine receptor, have been developed for the detection of guanosine nucleotides, and both their sensitivity and selectivity to various nucleotides were evaluated. The nanosensors were constructed from polystyrene nanoparticles functionalized by (N-(7-((3-aminophenyl)ethynyl)-1,8-naphthyridin-2-yl)acetamide) via carbodiimide ester activation. We show that this naphthyridine nanosensor binds guanosine nucleotides preferentially over adenine, cytosine, and thymidine nucleotides. Upon interaction with nucleotides, the fluorescence of the nanosensor is gradually quenched yielding Stern-Volmer constants in the range of 2.1 to 35.9 mM(-1). For all the studied quenchers, limits of detection (LOD) and tolerance levels for the nanosensors were also determined. The lowest (3σ) LOD was found for guanosine 3',5'-cyclic monophosphate (cGMP) and it was as low as 150 ng/ml. In addition, we demonstrated that the spatial arrangement of bound analytes on the nanosensors' surfaces is what is responsible for their selectivity to different guanosine nucleotides. We found a correlation between the changes of the fluorescence signal and the number of phosphate groups of a nucleotide. Results of molecular modeling and ζ-potential measurements confirm that the arrangement of analytes on the surface provides for the selectivity of the nanosensors. These fluorescent nanosensors have the potential to be applied in multi-analyte, array-based detection platforms, as well as in multiplexed microfluidic systems.

Fluorescent polyacrylamide nanoparticles for naproxen recognition.

We present the synthesis of fluorescent acrylamide nanoparticles (FANs) capable of recognizing non-steroidal anti-inflammatory drugs (NSAIDs) in buffered aqueous solutions. Within this important group, we selected naproxen, one of the 2-arylpropionic acids (profens), due to its use for the treatment of moderate pain, fever, and inflammation. The nanosensors were prepared under mild conditions of inverse microemulsion polymerization using aqueous acrylamide as the monomer and N,N'-methylenebisacrylamide as the cross-linker, employing the surfactants polyoxyethylene-4-lauryl ether (Brij 30) and sodium bis(2-ethylhexyl)sulfosuccinate in hexane. Furthermore, a fluorescent monomer, (E)-4-[4-(dimethylamino)styryl]-1-[4-(methacryloyloxymethyl)benzyl]pyridinium chloride (mDMASP) has been synthesized and incorporated into the nanoparticles. The nanosensors exhibit a broad absorbance at around 460 nm and a structureless fluorescence band with maximum at 590 nm in 0.5 M phosphate buffer (pH = 7.2). The recognition process is performed on the basis of ionic interactions which are monitored by the fluorescence increase at 590 nm upon addition of different concentrations of naproxen. The FANs show a size distribution in the range of 20-80 nm, with a hydrodynamic diameter of 34 nm. In order to assess the selectivity of the FANs, a systematic study was conducted on the effect produced by drugs and biomolecules that could interfere with the analysis of naproxen.

ZnO nanocrystals derived from organometallic approach: Delineating the role of organic ligand shell on physicochemical properties and nano-specific toxicity.

The surface organic ligands have profound effect on modulation of different physicochemical parameters as well as toxicological profile of semiconductor nanocrystals (NCs). Zinc oxide (ZnO) is one of the most versatile semiconductor material with multifarious potential applications and systematic approach to in-depth understand the interplay between ZnO NCs surface chemistry along with physicochemical properties and their nano-specific toxicity is indispensable for development of ZnO NCs-based devices and biomedical applications. To this end, we have used recently developed the one-pot self-supporting organometallic (OSSOM) approach as a model platform to synthesize a series of ZnO NCs coated with three different alkoxyacetate ligands with varying the ether tail length which simultaneously act as miniPEG prototypes. The ligand coating influence on ZnO NCs physicochemical properties including the inorganic core size, the hydrodynamic diameter, surface charge, photoluminescence (quantum yield and decay time) and ZnO NCs biological activity toward lung cells was thoroughly investigated. The resulting ZnO NCs with average core diameter of 4-5 nm and the hydrodynamic diameter of 8-13 nm exhibit high photoluminescence quantum yield reaching 33% and a dramatic slowing down of charge recombination up to 2.4 µs, which is virtually unaffected by the ligand's character. Nano-specific ZnO NCs-induced cytotoxicity was tested using MTT assay with normal (MRC-5) and cancer (A549) human lung cell lines. Noticeably, no negative effect has been observed up to the NCs concentration of 10 µg/mL and essentially very low negative toxicological impact could be noticed at higher concentrations. In the latter case, the MTT data analysis indicate that there is a subtle interconnection between inorganic core-organic shell dimensions and toxicological profile of ZnO NCs (strikingly, the NCs coated by the carboxylate bearing a medium ether chain length exhibit the lowest toxicity level). The results demonstrate that, when fully optimized, our organometallic self-supporting approach can be a highly promising method to obtain high-quality and bio-stable ligand-coated ZnO NCs.

White carbon: Fluorescent carbon nanoparticles with tunable quantum yield in a reproducible green synthesis.

In this study, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain carbon nanodots (CNDs) with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch and Tris-acetate-EDTA (TAE) buffer as carbon sources. Three kinds of CNDs are prepared using different sets of above mentioned starting materials. The as-synthesized CNDs: C-CND (starch only), N-CND 1 (starch in TAE) and N-CND 2 (TAE only) exhibit highly homogenous PL and are ready to use without need for further purification. The CNDs are stable over a long period of time (>1 year) either in solution or as freeze-dried powder. Depending on starting material, CNDs with PL quantum yield (PLQY) ranging from less than 1% up to 28% are obtained. The influence of the precursor concentration, reaction time and type of additives on the optical properties (UV-Vis absorption, PL emission spectrum and PLQY) is carefully investigated, providing insight into the chemical processes that occur during CND formation. Remarkably, upon freeze-drying the initially brown CND-solution turns into a non-fluorescent white/slightly brown powder which recovers PL in aqueous solution and can potentially be applied as fluorescent marker in bio-imaging, as a reduction agent or as a photocatalyst.

Single cell measurement of micro-viscosity by ratio imaging of fluorescence of styrylpyridinium probe.

In aqueous solution, compounds containing the styrylpyridinium group showed dual fluorescence, in which excitation at either 469 or 360 nm each produced an emission band around 600 nm. The ratio of fluorescence intensities of the two bands (R = I469/I360) was sensitive to local viscosity. The N-carboxymethyl butyl ester of DMASP was found to be able to irreversibly load into a living cell; presumably by hydrolysis involving cellular lipases it was transformed to a membrane-impermeable fluorescent carboxylate. A map of the ratio, R, from a single cell was generated using fluorescence imaging microscopy with a spectrofluorimeter in dual-excitation single-emission mode. After calibrating the ratio for the probe in water/glycerol solutions, the intracellular viscosities were obtained for a single cell of smooth muscle of a rat embryonic thoracic aorta. The intracellular viscosity is differentiated inside the cell and the obtained values 18-7 cP obey all the values reported by other laboratories. Fluorescence emission of the probe (500-650 nm) is in a very favourable region for its use with visible fluorescence microscopy, without interferences from cell or tissue auto-fluorescence. The results present ability to detect and follow small changes in the ratio of fluorescence intensities, and apparently of the micro-viscosity.

A time-resolved luminescent competitive assay to detect L-selectin using aptamers as recognition elements.

L-selectin is a protein with potential importance for numerous diseases and clinical disorders. In this paper, we present a new aptamer-based luminescent assay developed to detect L-selectin. The sensing system working principle is based on Förster Resonance Energy Transfer (FRET) from a donor terbium complex (TbC) to an acceptor cyanine dye (Cy5). In the present approach, the biotinylated aptamer is combined with Cy5-labelled streptavidin (Cy5-Strep) to yield an aptamer-based acceptor construct (Apta-Cy5-Strep), while L-selectin is conjugated using luminescent TbC. Upon aptamer binding to the TbC-labelled L-selectin (L-selectin-TbC), permanent donor-acceptor proximity is established which allows for radiationless energy transfer to occur. However, when unlabelled L-selectin is added, it competes with the L-selectin-TbC and the FRET signal decreases as the L-selectin concentration increases. FRET from the TbC to Cy5 was observed with time-gated time-resolved luminescence spectroscopy. A significant change in the corrected luminescence signal was observed in the dynamic range of 10-500 ng/mL L-selectin, the concentration range relevant for accelerated cognitive decline of Alzheimer's disease, with a limit of detection (LOD) equal to 10 ng/mL. The aptasensor-based assay is homogeneous and can be realized within one hour. Therefore, this method has the potential to become an alternative to tedious heterogeneous analytical methods, e.g. based on enzyme-linked immunosorbent assay (ELISA).

Optical behavior of substituted 4-(2'-hydroxyphenyl)imidazoles.

A set of tetraarylimidazoles bearing a 2-hydroxyphenyl substituent at position 4, as well as their models lacking intramolecular hydrogen bonds, was efficiently synthesized. Structural investigations proved that the hydrogen bond strength for 4-(2'-hydroxyphenyl)imidazoles is weaker than that for analogous 2-(2'-hydroxyphenyl)imidazoles as estimated from dihedral angles and bond distances. Photophysical investigations revealed that these compounds have other properties than those observed for imidazoles bearing a 2-hydroxyphenyl substituent at position 2. They exhibit a negligible fluorescence quantum yield regardless of the solvent polarity. Additionally, dual fluorescence is observed in nonpolar solvents. Plausibly, although a hydrogen bond is present within their chemical structure in the solid state, it is not clear if excited-state intramolecular proton transfer occurs. The presence of OH groups triggers the radiationless deactivation channel if compared with model imidazole possessing a 2-methoxyphenyl group.