High-Frequency Mechanical Properties of Tumors Measured by Brillouin Light Scattering.

The structure of tumors can be recapitulated as an elastic frame formed by the connected cytoskeletons of the cells invaded by interstitial and intracellular fluids. The low-frequency mechanics of this poroelastic system, dictated by the elastic skeleton only, control tumor growth, penetration of therapeutic agents, and invasiveness. The high-frequency mechanical properties containing the additional contribution of the internal fluids have also been posited to participate in tumor progression and drug resistance, but they remain largely unexplored. Here we use Brillouin light scattering to produce label-free images of tumor microtissues based on the high-frequency viscoelastic modulus as a contrast mechanism. In this regime, we demonstrate that the modulus discriminates between tissues with altered tumorigenic properties. Our micrometric maps also reveal that the modulus is heterogeneously altered across the tissue by drug therapy, revealing a lag of efficacy in the core of the tumor. Exploiting high-frequency poromechanics should advance present theories based on viscoelasticity and lead to integrated descriptions of tumor response to drugs.

Sub-100 nanometer silver doped gold-cysteine supramolecular assemblies with enhanced nonlinear optical properties.

The ability of gold(i) thiolates to self-assemble into supramolecular architectures opens the route for a new class of nanomaterials with a unique structure-optical property relationship. However, for a confirmed structure-optical property relationship, a control of the supramolecular architectures is required. In this work, we report a simple synthesis of sub-100 nanometer gold-cysteine and silver doped gold-cysteine supramolecular assemblies. We explore in particular silver-doping as a strategy to enhance the optical properties of these supramolecular assemblies. By an accurate characterization of as-synthesized supramolecular nanoparticles, we have been able to measure for the first time, their absolute two-photon absorption cross-section, two-photon excited fluorescence cross-section and first hyperpolarizabilities at different near-IR wavelengths. Huge values are obtained for silver doped gold-cysteine supramolecular assemblies, as compared to their corresponding undoped counterpart. In addition, we employ DFT and TD-DFT methods to study the geometric and electronic structures of model gold-cysteine and silver doped gold-cysteine compounds in order to address the structure-linear/nonlinear optical property relationship. The aim is to gain insights into the origin of the nonlinear optical enhancement of silver-doped gold supramolecular assemblies.

Infrared laser dissociation of single megadalton polymer ions in a gated electrostatic ion trap: the added value of statistical analysis of individual events.

In this study, we report the unimolecular dissociation mechanism of megadalton SO3-containing poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) polymer cations and anions with the aid of infrared multiphoton dissociation coupled to charge detection ion trap mass spectrometry. A gated electrostatic ion trap ("Benner trap") is used to store and detect single gaseous polymer ions generated by positive and negative polarity in an electrospray ionization source. The trapped ions are then fragmented due to the sequential absorption of multiple infrared photons produced from a continuous-wave CO2 laser. Several fragmentation pathways having distinct signatures are observed. Highly charged parent ions characteristically adopt a distinctive "stair-case" pattern (assigned to the "fission" process) whereas low charge species take on a "funnel like" shape (assigned to the "evaporation" process). Also, the log-log plot of the dissociation rate constants as a function of laser intensity between PAMPS positive and negative ions is significantly different.

Coupling of size-exclusion chromatography with electrospray ionization charge-detection mass spectrometry for the characterization of synthetic polymers of ultra-high molar mass.

RATIONALE: Coupling size-exclusion chromatography (SEC) with mass spectrometry (MS) allowed generation of a SEC calibration curve based on the analyte itself, which is more reliable than calibration based on non-related standards and faster than the use of the multiple detection mode. However, such SEC/MS couplings were limited to rather small synthetic polymers. METHODS: Based on the concept of image current detection, charge-detection mass spectrometry (CDMS) coupled to electrospray ionization (ESI) is a useful method for weighing macro-ions from compounds with masses higher than one megadalton (MDa). Using columns designed to allow analysis of synthetic polymers of over 15 million Dalton in mass, performance of the SEC/ESI-CDMS coupling was evaluated for polyacrylamide (PAM, 5-6 MDa) and a poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS, 2 MDa). RESULTS: The SEC/ESI-CDMS profiles were first compared with SEC-UV profiles: the systematic shift in retention time was assigned to the slightly different geometries of the two instrumental systems. The SEC/ESI-CDMS data were then compared with results obtained after the direct infusion of each sample into the ESI source. Both the shape of the molecular weight distribution and the mass values were similar with or without separation prior to ESI, and these values were consistent with data provided by the sample supplier. CONCLUSIONS: SEC/MS incorporating an online ESI-CDMS coupling was shown to be a rapid and efficient technique for the analysis of water-soluble synthetic polymers with ultra-high molecular mass in the megadalton range. The coupling also afforded an attractive solution for SEC calibration without the use of external standards.

Correlating droplet size with temperature changes in electrospray source by optical methods.

We investigated how the temperature and size of charged droplets are affected by the electrospray ionization (ESI) process, using in situ measurements involving laser-induced fluorescence and Mie scattering on a thermal gradient focusing ESI source. Rhodamine dyes were employed as temperature indicators using ratiometric intensity-based fluorescence techniques. The results were compared to lifetime-based techniques using tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate, [Ru(bpy)3](2+). Both methods gave similar profiles. Nevertheless, the precision and sensitivity were higher for lifetime-based techniques in comparison to intensity-based techniques. Global warming (with ΔT ∼10 K) of the ESI plume is reported while the size of the droplet decreases along the plume. The global warming indicates that the conductive thermal transfer (between the superheated sheath gas and the solvent) is predominant and stronger than the cooling effect due to the evaporation of the droplets, and this outcome is effectively reproduced by a diffusion-controlled evaporation model. Thermal gradient focusing ESI sources therefore appear to be efficient sources for evaporating large amounts of solvent, along with an increase in temperature.

Profiling an electrospray plume by laser-induced fluorescence and Fraunhofer diffraction combined to mass spectrometry: influence of size and composition of droplets on charge-state distributions of electrosprayed proteins.

We investigated how physico-chemical properties of charged droplets are affected by the electrospray process, using simultaneous in situ measurements by laser-induced fluorescence (LIF), Fraunhofer diffraction and mass spectrometry. For this purpose, we implemented a laser-induced-fluorescence profiling setup in conjunction with a fast, high-resolution particle sizing scheme on a modified Agilent Jet Stream electrospray source coupled to a single quadrupole mass analyser. The optical setup permits us to profile the solvent fractionation and the size of the droplets as they evaporate in an electrospray plume by measuring both the angular scattering pattern and emission spectra of a solvatochromic fluorescent dye. Mass spectra are recorded simultaneously. These mass spectrometry and optical spectroscopy investigations allow us to study the relation between the observed charge-state distributions of protein anions and physico-chemical properties of evaporating droplets in the spray plume. By mixing water with methanol, a refolding of cytochrome C is observed as the water percentage increases in the plume due to the preponderant evaporation of volatile methanol.

Charging megadalton poly(ethylene oxide)s by electrospray ionization. A charge detection mass spectrometry study.

Ions from compounds of megadalton (MDa) molecular weight were produced in an electrospray ionization source from solutions of poly(ethylene oxide) (PEO) samples with average molecular weights ranging from 1,000,000 to 7,000,000 Da. Charge detection mass spectrometry (CDMS) has been used to determine the mass of the MDa PEOs. Simultaneous measurement of the charge and velocity of individual ions allows the mass determination of the ion, after calibration of the instrument with independent samples. In addition to the mass spectra, CDMS generates charge-versus-mass plots, which allow investigation of the charging of electrosprayed ions over a broad range of masses. The experimental charging capacity of MDa PEOs is compared with a simple model based on the affinity of alkali cations for oxygen sites and on the electrostatic potential energy of the charged polymer. The charging capacity of PEOs was also investigated as a function of the concentration of and the type of alkali ions.

Micromechanical imaging of dentin with Brillouin microscopy.

The structure of teeth can be altered by diet, age or diseases such as caries and sclerosis. It is very important to characterize their mechanical properties to predict and understand tooth decay, design restorative dental procedures, and investigate their tribological behavior. However, existing imaging techniques are not well suited to investigating the micromechanics of teeth, in particular at tissue interfaces. Here, we describe a microscope based on Brillouin light scattering (BLS) developed to probe the spectrum of the light scattered from tooth tissues, from which the mechanical properties (sound velocity, viscosity) can be inferred with a priori knowledge of the refractive index. BLS is an inelastic process that uses the scattering of light by acoustic waves in the GHz range. Our microscope thus reveals the mechanical properties at the micrometer scale without contact with the sample. BLS signals show significant differences between sound tissues and pathological lesions, and can be used to precisely delineate carious dentin. We also show maps of the sagittal and transversal planes of sound tubular dentin that reveal its anisotropic microstructure at 1 µm resolution. Our observations indicate that the collagen-based matrix of dentine is the main load-bearing structure, which can be considered as a fiber-reinforced composite. In the vicinity of polymeric tooth-filling materials, we observed the infiltration of the adhesive complex into the opened tubules of sound dentine. The ability to probe the quality of this interfacial layer could lead to innovative designs of biomaterials used for dental restorations in contemporary adhesive dentistry, with possible direct repercussions on decision-making during clinical work. STATEMENT OF SIGNIFICANCE: Mechanical properties of teeth can be altered by diet, age or diseases. Yet existing imaging modalities cannot reveal the micromechanics of the tooth. Here we developed a new type of microscope that uses the scattering of a laser light by naturally-occurring acoustic waves to probe mechanical changes in tooth tissues at a sub-micrometer scale without contact to the sample. We observe significant mechanical differences between healthy tissues and pathological lesions. The contrast in mechanical properties also reveals the microstructure of the polymer-dentin interfaces. We believe that this new development of laser spectroscopy is very important because it should lead to innovative designs of biomaterials used for dental restoration, and allow delineating precisely destructed dentin for minimally-invasive strategies.

Mass and charge distributions of amyloid fibers involved in neurodegenerative diseases: mapping heterogeneity and polymorphism.

Heterogeneity and polymorphism are generic features of amyloid fibers with some important effects on the related disease development. We report here the characterization, by charge detection mass spectrometry, of amyloid fibers made of three polypeptides involved in neurodegenerative diseases: Aß1-42 peptide, tau and α-synuclein. Beside the mass of individual fibers, this technique enables to characterize the heterogeneity and the polymorphism of the population. In the case of Aß1-42 peptide and tau protein, several coexisting species could be distinguished and characterized. In the case of α-synuclein, we show how the polymorphism affects the mass and charge distributions.

pH-Induced transformation of ligated Au25 to brighter Au23 nanoclusters.

Thiolate-protected gold nanoclusters have recently attracted considerable attention due to their size-dependent luminescence characterized by a long lifetime and large Stokes shift. However, the optimization of nanocluster properties such as the luminescence quantum yield is still a challenge. We report here the transformation of Au25Capt18 (Capt labels captopril) nanoclusters occurring at low pH and yielding a product with a much increased luminescence quantum yield which we have identified as Au23Capt17. We applied a simple method of treatment with HCl to accomplish this transformation and we characterized the absorption and emission of the newly created ligated nanoclusters as well as their morphology. Based on DFT calculations we show which Au nanocluster size transformations can lead to highly luminescent species such as Au23Capt17.

Tandem ion mobility spectrometry coupled to laser excitation.

This manuscript describes a new experimental setup that allows to perform tandem ion mobility spectrometry (IMS) measurements and which is coupled to a high resolution time-of-flight mass spectrometer. It consists of two 79 cm long drift tubes connected by a dual ion funnel assembly. The setup was built to permit laser irradiation of the ions in the transfer region between the two drift tubes. This geometry allows selecting ions according to their ion mobility in the first drift tube, to irradiate selected ions, and examine the ion mobility of the product ions in the second drift tube. Activation by collision is possible in the same region (between the two tubes) and between the second tube and the time-of-flight. IMS-IMS experiments on Ubiquitin are reported. We selected a given isomer of charge state +7 and explored its structural rearrangement following collisional activation between the two drift tubes. An example of IMS-laser-IMS experiment is reported on eosin Y, where laser irradiation was used to produce radical ions by electron photodetachment starting from doubly deprotonated species. This allowed measuring the collision cross section of the radical photo-product, which cannot be directly produced with an electrospray source.

Infrared multiphoton dissociation tandem charge detection-mass spectrometry of single megadalton electrosprayed ions.

This work presents the implementation of tandem mass spectrometry for experiments on single electrosprayed ions from compounds of megadalton (MDa) molecular weight, using two charge detection devices. The first mass spectrometry stage (first charge detection device) combined with an ion gate allows both mass-to-charge ratio and charge selections of the megadalton ion of interest. The second stage is based on an electrostatic ion trap and consists of an image charge detection tube mounted between two ion mirrors. Single MDa ions can be stored for several dozen milliseconds. During the trapping time, single ions can be irradiated by a continuous wavelength CO(2) laser. We observe stepwise changes in the charge of a single trapped ion owing to multiphoton activation. Illustration of infrared multiphoton dissociation tandem mass spectrometry are given for single megadalton ions of poly(ethylene oxide)s and DNAs.