Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Opt Lett ; 45(8): 2347-2350, 2020 Apr 15.
Artigo em Inglês | MEDLINE | ID: mdl-32287230

RESUMO

We demonstrated a high-power long-wave infrared optical parametric oscillator at 9.8 µm based on a type-I phase-matching ${{\rm ZnGeP}_2}$ZnGeP2 crystal. By using a ${Q}$Q-switched 2091 nm Ho:YAG laser with pulse repetition frequency of 10 kHz as the pump source, the maximum average output power of 3.51 W at 9.8 µm was achieved with incident pump power of 90 W, corresponding to a slope efficiency of 4.81% and conversion efficiency at maximum pump power of 3.9%. The pulse width of 19.6 ns and linewidth of 142 nm were obtained at maximum output level. In addition, the beam quality factor ${M^2}$M2 was measured to be ${\sim}{2.2}$∼2.2.

2.
Opt Lett ; 44(3): 715-718, 2019 Feb 01.
Artigo em Inglês | MEDLINE | ID: mdl-30702718

RESUMO

We demonstrate a 102 W middle infrared ZnGeP2 (ZGP) optical parametric amplifier (OPA) pumped by a 2097-nm Q-switched Ho:YAG laser at a pulse repetition frequency of 10 kHz. The seed middle infrared laser was produced by a ZGP optical parametric oscillator. Its average power was 28.4 W pumped by a 50 W 2097-nm laser. By thermal lens compensation, the beam factor M2 reduced from 3.1 to 2.1. When the incident Ho pump power was 120 W, the middle infrared ZGP OPA yielded the maximum average output power of 102 W and slope efficiency of 61.7%. The overall optical conversion efficiency of 60% from Ho to middle infrared was obtained for the whole middle infrared laser system. In addition, at the maximum average output power, the beam quality factors of the middle infrared ZGP OPA were measured to be about 2.7 and 2.8 for horizontal and vertical directions, respectively.

3.
Opt Lett ; 43(24): 5989-5992, 2018 Dec 15.
Artigo em Inglês | MEDLINE | ID: mdl-30547987

RESUMO

A high-efficiency and high-brightness Ho:YAG master-oscillator power-amplifier (MOPA) system dual-end pumped by Tm:YLF lasers was demonstrated. The maximum output power of 231 W at a wavelength of 2090.7 nm was achieved with pulse repetition frequency of 10 kHz and pulse width of 22.9 ns, corresponding to pulse energy of 23.1 mJ and peak power of ∼1 MW. The extraction efficiency of the amplifier system was more than 60%. The beam quality factor M2 was measured to be ∼1.05. Using the Ho:YAG MOPA system as the pump source, the ZnGeP2 optical parametric oscillator delivered an output power of 110 W, corresponding to slope efficiency of 62%.

4.
Opt Express ; 24(6): 6083-7, 2016 Mar 21.
Artigo em Inglês | MEDLINE | ID: mdl-27136802

RESUMO

We, for the first time, demonstrate a tunable mid-infrared BaGa4Se7-based optical parametric oscillator pumped by a acousto-optical Q-switched Ho:YAG laser at 2090.6 nm. Up to 1.55 W of average power was generated in the 3-5 µm range, corresponding to an optical-to-optical conversion efficiency of 14.4% and a slope efficiency of 19.9%. The mid-IR radiation spectra were also seriously researched at different phase-matched angles. The tunable range was 3.49-4.13 µm for the signal, and 5.19-4.34 µm for the idler.

5.
Opt Lett ; 39(23): 6589-92, 2014 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-25490628

RESUMO

We reported a high-power ZnGeP2 (ZGP) optical parametric oscillator (OPO) pumped by a Q-switched Ho:YAG laser. The maximum output power of the ZGP OPO was 41.2 W at 107.0 W incident Ho pump power, corresponding to a slope efficiency of 44.6%. The ZGP OPO produced 16-ns mid-IR pulse laser in the 3.74-3.98 µm and 4.38-4.76 µm spectral regions simultaneously. The beam quality was measured to be M²<4.37. The continuous wave maximum average output power of the Ho:YAG laser was 128 W, corresponding to a slope efficiency of 65.8%.

6.
Appl Opt ; 51(33): 7887-90, 2012 Nov 20.
Artigo em Inglês | MEDLINE | ID: mdl-23207298

RESUMO

High-efficient CW and Q-switched Ho:YAG lasers resonantly dual-end-pumped by two diode-pumped Tm:YLF lasers at 1908 nm were investigated. A maximum slope efficiency of 74.8% in CW operation as well as a maximum output power of 58.7 W at 83.2 W incident pump power was achieved, which corresponded to an optical-to-optical conversion efficiency of 70.6%. The maximum pulse energy of 2.94 mJ was achieved, with a 31 ns FWHM pulse width and a peak power of approximately 94.7 kW.


Assuntos
Lasers de Estado Sólido , Transferência de Energia , Desenho de Equipamento , Análise de Falha de Equipamento
SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa