RESUMO
Phosphorus (P) is the key in maintaining food security and ecosystem functions. Population growth and economic development have increased the demand for phosphate rocks. China has gradually developed from zero phosphate mining to the world's leading P miner, fertilizer, and agricultural producer since 1949. China released policies, such as designating phosphate rock as a strategic resource, promoting eco-agricultural policies, and encouraging the use of solid wastes produced in mining and the phosphorus chemical industry as construction materials. However, methodological and data gaps remain in the mapping of the long-term effects of policies on P resource efficiency. Here, P resource efficiency can be represented by the potential of the P cycle to concentrate or dilute P as assessed by substance flow analysis (SFA) complemented by statistical entropy analysis (SEA). P-flow quantification over the past 70 years in China revealed that both resource utilization and waste generation peaked around 2015, with 20 and 11 Mt of mined and wasted P, respectively. Additionally, rapidly increasing aquaculture wastewater has exacerbated pollution. The resource efficiency of the Chinese P cycle showed a U-shaped change with an overall improvement of 22.7%, except for a temporary trough in 1975. The driving force behind the efficiency decline was the roaring phosphate fertilizer industry, as confirmed by the sharp increase in P flows for both resource utilization and waste generation from the mid-1960s to 1975. The positive driving forces behind the 30.7% efficiency increase from 1975 to 2018 were the implementation of the resource conservation policy, downstream pollution control, and, especially, the circular agro-food system strategy. However, not all current management practices improve the P resource efficiency. Mixing P industry waste with construction materials and the development of aquaculture to complement offshore fisheries erode P resource efficiency by 2.12% and 9.19%, respectively. With the promotion of a zero-waste society in China, effective P-cycle management is expected.
Assuntos
Desenvolvimento Econômico , Fósforo , China , Fertilizantes , AgriculturaRESUMO
BACKGROUND: In this study, the effect of static magnetic fields (SMFs) on improving the performance of activated sludge process to enhance the higher rate of microbial growth biomass and improve sludge settling characteristics in real operation conditions of wastewater treatment plants has been investigated. The effect of SMFs (15 mT), hydraulic retention time, SRT, aeration time on mixed liquor suspended solids (MLSS) concentrations, mixed liquor volatile suspended solids (MLVSS) concentrations, α-factor, and pH in the complete-mix activated sludge (CMAS) process during 30 days of the operation, were evaluated. RESULTS: There were not any differences between the concentration of MLSS in the case (2148.8 ± 235.6 mg/L) and control (2260.1 ± 296.0 mg/L) samples, however, the mean concentration of MLVSS in the case (1463.4 ± 419.2 mg/L) was more than the control samples (1244.1 ± 295.5 mg/L). Changes of the concentration of MLVSS over time, follow the first and second-order reaction with and without exposure of SMFs respectively. Moreover, the slope of the line and, the mean of α-factor in the case samples were 6.255 and, - 0.001 higher than the control samples, respectively. Changes in pH in both groups of the reactors were not observed. The size of the sluge flocs (1.28 µm) and, the spectra of amid I' (1440 cm-1) and II' (1650 cm-1) areas related to hydrogenase bond in the case samples were higher than the control samples. CONCLUSIONS: SMFs have a potential to being considered as an alternative method to stimulate the microbial growth rate in the aeration reactors and produce bioflocs with the higher density in the second clarifiers.
Assuntos
Esgotos , Purificação da Água , Esgotos/química , Eliminação de Resíduos Líquidos/métodos , Reatores Biológicos , Purificação da Água/métodos , BiomassaRESUMO
The high-efficiency and additionally economic benefits generated from aerobic granular sludge (AGS) wastewater treatment have led to its increasing popularity among academics and industrial players. The AGS process can recycle high value-added biomaterials including extracellular polymeric substances (EPS), sodium alginate-like external polymer (ALE), polyhydroxyfatty acid (PHA), and phosphorus (P), etc., which can serve various fields including agriculture, construction, and chemical while removing pollutants from wastewaters. The effects of various key operation parameters on formation and structural stability of AGS are comprehensively summarized. The degradable metabolism of typical pollutants and corresponding microbial diversity and succession in the AGS wastewater treatment system are also discussed, especially with a focus on emerging contaminants removal. In addition, recent attempts for potentially effective production of high value-added biomaterials from AGS are proposed, particularly concerning improving the yield, quality, and application of these biomaterials. This review aims to provide a reference for in-depth research on the AGS process, suggesting a new alternative for wastewater treatment recycling.
Assuntos
Esgotos , Águas Residuárias , Esgotos/química , Eliminação de Resíduos Líquidos , Aerobiose , Reatores BiológicosRESUMO
The development of commercial software and simulators has progressed to assist engineers to optimize design, operation, and control of wastewater treatment processes. Commonly, manual trial-and-error approaches combined with engineering experience or exhaustive searches are used to find candidate solutions. These approaches are becoming less favorable because of the increasingly elaborate process models, especially for new and innovative processes whose process knowledge is not fully established. This study coupled genetic algorithms (GAs), a subfield of artificial intelligence (AI), with a commercial simulator (SUMO) to automatically complete a design task. The design objective was the upgrade of a conventional Modified Ludzack-Ettinger (MLE) process to a hybrid membrane aerated biofilm reactor (hybrid MABR). Results demonstrated that GAs can (1) accurately estimate five influent wastewater fractions using eleven typical measurements - 3 out of 5 estimated fractions were nearly the same and the other two were within 7% relative errors and (2) propose reasonable designs for the hybrid MABR process that reduce footprint by 17%, aeration by 57%, and pumping by 57% with significantly improved effluent nitrogen quality (TN<3 mg-N/L). This study demonstrated that tools from AI promote efficiency in wastewater treatment process design, optimization and control by searching candidate solutions both smartly and automatically in replacement of manual trial-and-error methods. The methodology in this study contributes to accumulating process knowledge, understanding trade-offs between decisions, and finally accelerates the learning pace for new processes.
Assuntos
Reatores Biológicos , Eliminação de Resíduos Líquidos , Inteligência Artificial , Automação , Biofilmes , Nitrogênio , Eliminação de Resíduos Líquidos/métodos , Águas ResiduáriasRESUMO
Membrane aerated biofilm reactors (MABRs) are a promising biological wastewater treatment technology, whose industrial applications have dramatically accelerated in the last five years. Increased popularity and fast industrial adaptation are coupled with increased needs to monitor, optimize, and control MABRs with available online sensors. Observations of commercial scale MABR installations have shown a distinctive and repetitive pattern relating oxygen purity in MABR exhaust gas to reactor ammonia concentrations. This provides an obvious opportunity for process monitoring and control which this paper investigates with the help of modeling. The relationship plots between the bulk ammonia concentration and the oxygen purity are defined as MABR fingerprint plots, which are described in the form of steady-state curves and dynamic trajectories. This study systematically investigated, analyzed, and explained the behaviors and connections of steady-state curves and dynamic trajectories with a MABR model in SUMO®, and proposed a hypothesis about utilizing the MABR fingerprint plots to characterize MABR system performance, identify the limiting factor of biofilms, and possibly develop a soft senor for MABR biofilm thickness monitoring and control.
Assuntos
Amônia , Reatores Biológicos , Biofilmes , Águas Residuárias , Oxigênio , Eliminação de Resíduos LíquidosRESUMO
Partial nitritation anammox (PNA) membrane-aerated biofilm reactors (MABRs) can be used in mainstream nitrogen removal to help facilities reduce their energy consumption. Previous PNA MABR research has not investigated the impacts of staging, i.e. arraying MABRs in series, on their nitrogen removal performance, operation, and ability to suppress nitrite oxidizing bacteria. In this paper, a mathematical model simulated PNA MABR performance at different influent total ammonia concentrations and loadings. A design methodology for staging PNA MABRs was created and found that the amount of membrane surface area is dependent upon the total ammonia-nitrogen concentration and loading, and the air loading to the membrane must be proportional to the total ammonia-nitrogen loading to maximize the total inorganic nitrogen (TIN) removal rate. This led to approximately equal-sized stages that each had a TIN removal percentage of 71% of the influent total ammonia nitrogen. Staging a treatment train resulted in 9.8% larger total ammonia and 9.3% larger total nitrogen removal rates when compared with an un-staged reactor. The un-staged reactor also was not able to produce an effluent total ammonia concentration below 5 mg N/L which would be necessary for many facilities' permits.
Assuntos
Amônia , Reatores Biológicos , Oxidação Anaeróbia da Amônia , Biofilmes , Reatores Biológicos/microbiologia , Desnitrificação , Nitrogênio , OxirreduçãoRESUMO
Urine diversion has been proposed as an approach for producing renewable fertilizers and reducing nutrient loads to wastewater treatment plants. Life cycle assessment was used to compare environmental impacts of the operations phase of urine diversion and fertilizer processing systems [via (1) a urine concentration alternative and (2) a struvite precipitation and ion exchange alternative] at a city scale to conventional systems. Scenarios in Vermont, Michigan, and Virginia were modeled, along with additional sensitivity analyses to understand the importance of key parameters, such as the electricity grid and wastewater treatment method. Both urine diversion technologies had better environmental performance than the conventional system and led to reductions of 29-47% in greenhouse gas emissions, 26-41% in energy consumption, approximately half the freshwater use, and 25-64% in eutrophication potential, while acidification potential ranged between a 24% decrease to a 90% increase. In some situations, wastewater treatment chemical requirements were eliminated. The environmental performance improvement was usually dependent on offsetting the production of synthetic fertilizers. This study suggests that urine diversion could be applied broadly as a strategy for both improving wastewater management and decarbonization.
Assuntos
Fertilizantes , Estágios do Ciclo de Vida , Animais , Cidades , Michigan , Vermont , VirginiaRESUMO
Grey-box models, which combine the explanatory power of first-principle models with the ability to detect subtle patterns from data, are gaining increasing attention in wastewater sectors. Intuitive, simple structured but fit-for-purpose grey-box models that capture time-varying dynamics by adaptively estimating parameters are desired for process optimization and control. As an example, this study presents the identification of such a grey-box model structure and its further use by an extended Kalman filter (EKF), for the estimation of the nitrification capacity and ammonia concentrations of a typical Modified Ludzack-Ettinger (MLE) process. The EKF was implemented and evaluated in real time by interfacing Python with SUMO (Dynamita™), a widely used commercial process simulator. The EKF was able to accurately estimate the ammonia concentrations in multiple tanks when given only the concentration in one of them. In addition, the nitrification capacity of the system could be tracked in real time by the EKF, which provides intuitive information for facility managers and operators to monitor and operate the system. Finally, the realization of EKF is critical to the development of future advance control, for instance, model predictive control.
Assuntos
Amônia , Águas ResiduáriasRESUMO
Mathematical modelling was used to investigate the possibility to use membrane aerated biofilm reactors (MABRs) in a largely anoxic suspended growth bioreactor to produce the nitrate-nitrogen required for heterotrophic denitrification and the growth of denitrifying phosphorus accumulating organisms (DPAOs). The results indicate that such a process can be used to achieve a variety of process objectives. The capture of influent biodegradable organic matter while also achieving significant total inorganic nitrogen (TIN) removal can be achieved with or without use of primary treatment by operation at a relatively short suspended growth solids residence time (SRT). Low effluent TIN concentrations can also be achieved, irrespective of the influent wastewater chemical oxygen demand (COD)/total nitrogen (TN) ratio, with somewhat larger suspended growth SRT. Biological phosphorus and nitrogen removal can also be effectively achieved. Further experimental work is needed to confirm these modelling results.
Assuntos
Esgotos , Eliminação de Resíduos Líquidos , Biofilmes , Reatores Biológicos , Desnitrificação , Nitrogênio , Nutrientes , FósforoRESUMO
The membrane biofilm reactor (MBfR), which is based on the counter diffusion of the electron donors and acceptors into the biofilm, represents a novel technology for wastewater treatment. When process air or oxygen is supplied, the MBfR is known as the membrane aerated biofilm reactor (MABR), which has high oxygen transfer rate and efficiency, promoting microbial growth and activity within the biofilm. Over the past few decades, laboratory-scale studies have helped researchers and practitioners understand the relevance of influencing factors and biological transformations in MABRs. In recent years, pilot- to full-scale installations are increasing along with process modeling. The resulting accumulated knowledge has greatly improved understanding of the counter-diffusional biological process, with new challenges and opportunities arising. Therefore, it is crucial to provide new insights by conducting this review. This paper reviews wastewater treatment advancements using MABR technology, including design and operational considerations, microbial community ecology, and process modeling. Treatment performance of pilot- to full-scale MABRs for process intensification in existing facilities is assessed. This paper also reviews other emerging applications of MABRs, including sulfur recovery, industrial wastewater, and xenobiotics bioremediation, space-based wastewater treatment, and autotrophic nitrogen removal. In conclusion, commercial applications demonstrate that MABR technology is beneficial for pollutants (COD, N, P, xenobiotics) removal, resource recovery (e.g., sulfur), and N2O mitigation. Further research is needed to increase packing density while retaining efficient external mass transfer, understand the microbial interactions occurring, address existing assumptions to improve process modeling and control, and optimize the operational conditions with site-specific considerations.
Assuntos
Reatores Biológicos , Purificação da Água , Biofilmes , Membranas Artificiais , Nitrogênio , Eliminação de Resíduos Líquidos , Águas ResiduáriasRESUMO
This paper reports long-term performance of a two-stage AMX® system with a capacity of 70 m3/d treating actual reject water. An air-lift granulation reactor performed partial nitritation (PN-AGR) at an average nitrogen loading rate (NLR) of 3.1 kgN/m3-d, producing an average effluent NO2--N/NH4+-N ratio of 1.04. The average nitrogen removal rate of the system was 3.91 kgN/m3-d following an anaerobic ammonium oxidation (Anammox) stage moving bed biofilm reactor (A-MBBR). Although the total nitrogen concentrations in the reject water fluctuated seasonally, overall nitrogen removal efficiency (NRE) of the two-stage AMX® system was very stable at over 87%. The two-stage AMX® system, consisting of a PN-AGR followed by an A-MBBR, operated at a stable NLR of 1.86 kgN/m3-d (1.64 kgN/m3-d including the intermediate tank), which is 1.8 times higher (1.6 times including the intermediate tank) than other commercialized single-stage partial nitritation/Anammox (PN/A) processes (which operate at a NLR of about 1 kgN/m3-d). The PN-AGR was affected by high influent total suspended solids (TSS) loads, but was able to recover within a short period of 4 days, which confirmed that the two-stage PN/A process is resilient to TSS load fluctuations.
Assuntos
Compostos de Amônio , Nitrogênio , Biofilmes , Reatores Biológicos , Desnitrificação , Oxirredução , Águas Residuárias , ÁguaRESUMO
The efficient provision of food, energy, and water (FEW) resources to cities is challenging around the world. Because of the complex interdependence of urban FEW systems, changing components of one system may lead to ripple effects on other systems. However, the inputs, intersectoral flows, stocks, and outputs of these FEW resources from the perspective of an integrated urban FEW system have not been synthetically characterized. Therefore, a standardized and specific accounting method to describe this system is needed to sustainably manage these FEW resources. Using the Detroit Metropolitan Area (DMA) as a case, this study developed such an accounting method by using material and energy flow analysis to quantify this urban FEW nexus. Our results help identify key processes for improving FEW resource efficiencies of the DMA. These include (1) optimizing the dietary habits of households to improve phosphorus use efficiency, (2) improving effluent-disposal standards for nitrogen removal to reduce nitrogen emission levels, (3) promoting adequate fertilization, and (4) enhancing the maintenance of wastewater collection pipelines. With respect to water use, better efficiency of thermoelectric power plants can help reduce water withdrawals. The method used in this study lays the ground for future urban FEW analyses and modeling.
Assuntos
Fósforo , Água , Cidades , Nitrogênio , Abastecimento de ÁguaRESUMO
Water resource recovery facility (WRRF) modeling requires robust and reliable characterization of the wastewater to be treated. Poor characterization can lead to unreliable model predictions, which can have significant economic consequences when models are used to make important facility upgrade/expansion and operational decisions. Current wastewater characterization practice often involves a limited number of relatively short-duration intensive campaigns. On-going work at the Great Lakes Water Authority (GLWA) WRRF, serving 3.1 million residents in Southeast Michigan, provided an opportunity to conduct more detailed wastewater characterization over an annual cycle. The collection system includes a significant combined sewer component, and the WRRF provides primary and secondary treatment (high purity oxygen activated sludge) and phosphorus removal via ferric chloride addition. Detailed wastewater fractionation was conducted weekly over a one-year period. Daily conventional secondary influent and process operational data from that same period were used to evaluate the efficiency of various wastewater characterization strategies on the bioreactor mixed liquor volatile suspended solids (MLVSS) concentration calculated using an International Water Association (IWA) Activated Sludge Model Number 1 (ASM1) with minor modifications. An adaptive strategy consisting of a series of short-duration characterization campaigns, used to assess model fit for its intended purpose and continued until a robust and reliable model result, is recommended. Periods of unusual plant influent and/or operational conditions should be identified, and data from these periods potentially excluded from the analysis. Sufficient data should also be collected to identify periods when poor model structure, rather than wastewater characterization, leads to poor fit of the model to actual data.
Assuntos
Eliminação de Resíduos Líquidos , Águas Residuárias , Reatores Biológicos , Fósforo , EsgotosRESUMO
We examined how long-term operation of anaerobic-oxic and anaerobic-anoxic sequencing batch reactors (SBRs) affects the enhanced biological phosphorus removal (EBPR) performance and sludge characteristics. The microbial characteristics of phosphorus accumulating organism (PAO) and denitrifying PAO (DPAO) sludge were also analyzed through a quantitative analysis of microbial community structure. Compared with the initial stage of operation characterized by unstable EBPR, both PAO and DPAO SBR produced a stable EBPR performance after about 100-day operation. From day 200â¯days (DPAO SBR) and 250â¯days (PAO SBR) onward, sludge granulation was observed, and the average granule size of DPAO SBR was approximately 5 times larger than that of PAO SBR. The DPAO granular sludge contained mainly rod-type microbes, whereas the PAO granular sludge contained coccus-type microbes. Fluorescence in situ hybridization analysis revealed that a high ratio of Accumulibacter clade I was found only in DPAO SBR, revealing the important role of this organism in the denitrifying EBPR system. A pyrosequencing analysis showed that Accumulibacter phosphatis was present in PAO sludge at a high proportion of 6%, whereas it rarely observed in DPAO sludge. Dechloromonas was observed in both PAO sludge (3.3%) and DPAO sludge (3.2%), confirming that this organism can use both O2 and NO3- as electron acceptors. Further, Thauera spp. was identified to have a new possibility as denitrifier capable of phosphorous uptake under anoxic condition.
Assuntos
Desnitrificação , Fósforo/metabolismo , Esgotos/microbiologia , Reatores Biológicos/microbiologiaRESUMO
A demonstrated approach to design the, so-called, medium-bubble air diffusion oxygen transfer system for moving bed biofilm reactor (MBBR) and integrated fixed film activated sludge (IFAS) processes is described. Operational full-scale biological water resource recovery systems treating municipal sewage, designed using this methodology, provide reliable service. Further improvement is possible, however, as knowledge gaps are filled and results in more rationally-based system designs. Pilot-scale testing demonstrates significant enhancement of oxygen transfer capacity from the presence of media. Establishment of the relationship in full-scale systems between diffuser submergence, aeration rate, and biofilm carrier fill fraction will enhance MBBR and IFAS aerobic process design, cost, and performance. Limited testing of full-scale systems prevents computation of alpha values and can be addressed by further full-scale testing under actual operating conditions. Control of MBBR and IFAS aerobic zone oxygen transfer systems can be optimized by recognizing that varying residual dissolved oxygen concentrations are needed, depending on operating conditions. Further application of oxygen transfer control approaches used in activated sludge systems, such as ammonia-based oxygen transfer system control, further improves MBBR and IFAS system energy efficiency.
Assuntos
Reatores Biológicos , Desenho de Equipamento/instrumentação , Oxigênio/metabolismo , Eliminação de Resíduos Líquidos/métodos , Aerobiose , Esgotos , Eliminação de Resíduos Líquidos/instrumentaçãoRESUMO
Settling of activated sludge particles has long been the key to successfully achieving secondary treatment. While soluble products can be converted to particulate components via microbial reactions in the activated sludge process, it is the subsequent removal of these particulate components that is the key to achieving ultimate water quality criteria. An understanding of the operating parameters for selecting good settling activated sludge particles was first documented in the 1970s and 1980s. An understanding of the growth pressures that can be imposed on filamentous organisms, and the impacts of selector zones in general, allowed the design and operation of activated sludge processes to routinely achieve good sludge settleability. More recently, research has identified what could be the next evolution in flocculant growth, with the growing interest in aerobic granular sludge. Aerobic granular sludge is purported to provide superior settling properties, and many of the growth pressures identified for aerobic granular sludge are also present in activated sludge systems. These enhanced settling sludge systems are gaining significant interest, but the factors leading to enhanced sludge settleability could be present in historical and existing systems. Three facilities were evaluated that exhibited enhanced settleability (i.e. sludge volume indices of less than 70 mL/g the majority of the time) to determine how these enhanced settling sludges compare to typical settling curves from the literature. The enhanced settling sludge facilities exhibit key differences related to surface overflow rate, return activated sludge (RAS) pumping requirements, and sensitivity to solids concentration that are critical for developing effective settling designs for enhanced settling sludge facilities. As more facilities aim to achieve enhanced settling sludge for intensification of infrastructure, it will be important to carefully consider historic settling curves and to develop site-specific settling criteria when possible.
Assuntos
Floculação , Esgotos , Eliminação de Resíduos Líquidos , Purificação da Água , Aerobiose , Reatores Biológicos , Modelos TeóricosRESUMO
A researcher or practitioner can employ a biofilm model to gain insight into what controls the performance of a biofilm process and for optimizing its performance. While a wide range of biofilm-modeling platforms is available, a good strategy is to choose the simplest model that includes sufficient components and processes to address the modeling goal. In most cases, a one-dimensional biofilm model provides the best balance, and good choices can range from hand-calculation analytical solutions, simple spreadsheets, and numerical-method platforms. What is missing today is clear guidance on how to apply a biofilm model to obtain accurate and meaningful results. Here, we present a five-step framework for good biofilm reactor modeling practice (GBRMP). The first four steps are (1) obtain information on the biofilm reactor system, (2) characterize the influent, (3) choose the plant and biofilm model, and (4) define the conversion processes. Each step demands that the model user understands the important components and processes in the system, one of the main benefits of doing biofilm modeling. The fifth step is to calibrate and validate the model: System-specific model parameters are adjusted within reasonable ranges so that model outputs match actual system performance. Calibration is not a simple 'by the numbers' process, and it requires that the modeler follows a logical hierarchy of steps. Calibration requires that the adjusted parameters remain within realistic ranges and that the calibration process be carried out in an iterative manner. Once each of steps 1 through 5 is completed satisfactorily, the calibrated model can be used for its intended purpose, such as optimizing performance, trouble-shooting poor performance, or gaining deeper understanding of what controls process performance.
Assuntos
Biofilmes/crescimento & desenvolvimento , Reatores Biológicos/normas , Modelos Biológicos , Eliminação de Resíduos Líquidos/métodos , Fenômenos Fisiológicos Bacterianos , Calibragem , Eliminação de Resíduos Líquidos/normas , Águas ResiduáriasRESUMO
Driven by energy neutral/positive of wastewater treatment plants, significant efforts have been made on the research and development of mainstream partial nitritation and anaerobic ammonium oxidation (anammox) (PN/A) (deammonification) process since the early 2010s. To date, feasibility of mainstream PN/A process has been demonstrated and proven by experimental results at various scales although with the low loading rates and elevated nitrogen concentration in the effluent at low temperatures (15-10 °C). This review paper provides an overview of the current state of research and development of mainstream PN/A process and critically analyzes the bottlenecks for its full-scale application. The paper discusses the following: (i) the current status of research and development of mainstream PN/A process; (ii) the interactions among aerobic ammonium-oxidizing bacteria, aerobic nitrite-oxidizing bacteria, anammox bacteria, and heterotrophic bacteria; (iii) the suppression of aerobic nitrite-oxidizing bacteria; (iv) process and bioreactors; and (v) suggested further studies including efficient and robust carbon concentrating pretreatment, deepening of understanding competition between autotrophic nitrogen-converting organisms, intensification of biofilm anammox activity, reactor design, and final polishing.
Assuntos
Compostos de Amônio/metabolismo , Nitrogênio/metabolismo , Eliminação de Resíduos Líquidos/métodos , Reatores Biológicos/microbiologia , Purificação da Água/métodosRESUMO
The need to increase the peak wet weather secondary treatment capacity of the City of Akron, Ohio, Water Reclamation Facility (WRF) provided the opportunity to test an integrated methodology for maximizing the peak wet weather secondary treatment capacity of activated sludge systems. An initial investigation, consisting of process modeling of the secondary treatment system and computational fluid dynamics (CFD) analysis of the existing relatively shallow secondary clarifiers (3.3 and 3.7 m sidewater depth in 30.5 m diameter units), indicated that a significant increase in capacity from 416 000 to 684 000 m3/d or more was possible by adding step feed capabilities to the existing bioreactors and upgrading the existing secondary clarifiers. One of the six treatment units at the WRF was modified, and an extensive 2-year testing program was conducted to determine the total peak wet weather secondary treatment capacity achievable. The results demonstrated that a peak wet weather secondary treatment capacity approaching 974 000 m3/d is possible as long as secondary clarifier solids and hydraulic loadings could be separately controlled using the step feed capability provided. Excellent sludge settling characteristics are routinely experienced at the City of Akron WRF, raising concerns that the identified peak wet weather secondary treatment capacity could not be maintained should sludge settling characteristics deteriorate for some reason. Computational fluid dynamics analysis indicated that the impact of the deterioration of sludge settling characteristics could be mitigated and the identified peak wet weather secondary treatment capacity maintained by further use of the step feed capability provided to further reduce secondary clarifier solids loading rates at the identified high surface overflow rates. The results also demonstrated that effluent limits not only for total suspended solids (TSS) and five-day carbonaceous biochemical oxygen demand (cBOD5) could be maintained, but also for ammonia-nitrogen and total phosphorous (TP). Although hydraulic limitations in other parts of the WRP prevent this full capacity to be realized, the City is proceeding to implement the modifications identified using this integrated methodology.
Assuntos
Drenagem Sanitária/métodos , Instalações de Eliminação de Resíduos , Eliminação de Resíduos Líquidos/métodos , Purificação da Água , Chuva , Movimentos da ÁguaRESUMO
Biofilms are complex biostructures that appear on all surfaces that are regularly in contact with water. They are structurally complex, dynamic systems with attributes of primordial multicellular organisms and multifaceted ecosystems. The presence of biofilms may have a negative impact on the performance of various systems, but they can also be used beneficially for the treatment of water (defined herein as potable water, municipal and industrial wastewater, fresh/brackish/salt water bodies, groundwater) as well as in water stream-based biological resource recovery systems. This review addresses the following three topics: (1) biofilm ecology, (2) biofilm reactor technology and design, and (3) biofilm modeling. In so doing, it addresses the processes occurring in the biofilm, and how these affect and are affected by the broader biofilm system. The symphonic application of a suite of biological methods has led to significant advances in the understanding of biofilm ecology. New metabolic pathways, such as anaerobic ammonium oxidation (anammox) or complete ammonium oxidation (comammox) were first observed in biofilm reactors. The functions, properties, and constituents of the biofilm extracellular polymeric substance matrix are somewhat known, but their exact composition and role in the microbial conversion kinetics and biochemical transformations are still to be resolved. Biofilm grown microorganisms may contribute to increased metabolism of micro-pollutants. Several types of biofilm reactors have been used for water treatment, with current focus on moving bed biofilm reactors, integrated fixed-film activated sludge, membrane-supported biofilm reactors, and granular sludge processes. The control and/or beneficial use of biofilms in membrane processes is advancing. Biofilm models have become essential tools for fundamental biofilm research and biofilm reactor engineering and design. At the same time, the divergence between biofilm modeling and biofilm reactor modeling approaches is recognized.