RESUMO
OBJECTIVES: Due to severe limitations of dental pulp sensitivity tests, the direct recording of pulsed blood flow, using photoplethysmography (PPG), has been proposed. In vivo evaluation is methodologically difficult and in vitro models have hitherto been adversely influenced by shortcomings in emulating the in vivo situation. Consequently, the aim of this study was to test an improved data acquisition system and to use this configuration for recording pulsed blood in a new model. MATERIALS AND METHODS: We introduced a PPG signal detection system by recording signals under different blood flow conditions at two wavelengths (625 and 940 nm). Pulsed blood flow signals were measured using an in vitro model, containing a molar with a glass pulp and a resin socket, which closely resembled in vivo conditions with regard to volumetric blood flow, pulp anatomy, and surrounding tissue. RESULTS: The detection system showed improved signal strength without stronger blanketing of noise. On the tooth surface, it was possible to detect signals emanating from pulsed blood flow from the glass pulp and from surrounding tissue at 625 nm. At 940 nm, pulp derived signals were recorded, without interference signals from surrounding tissue. CONCLUSION: The PPG-based method has the potential to detect pulsed blood flow in small volumes in the pulp and (at 625 nm) also in adjacent tissues. CLINICAL RELEVANCE: The results show the need for clear differentiation of the spatial origins of blood flow signals of any vitality test method to be applied to teeth.
Assuntos
Cavidade Pulpar , Teste da Polpa Dentária , Polpa Dentária , Fluxometria por Laser-Doppler , Dente MolarRESUMO
We report on the observation of photogalvanic effects in epitaxially grown Sb2Te3 and Bi2Te3 three-dimensional (3D) topological insulators (TI). We show that asymmetric scattering of Dirac fermions driven back and forth by the terahertz electric field results in a dc electric current. Because of the "symmetry filtration" the dc current is generated by the surface electrons only and provides an optoelectronic access to probe the electron transport in TI, surface domains orientation, and details of electron scattering in 3D TI even at room temperature.
RESUMO
In this paper, we show that electron states formed in topological insulators at the interfaces topological phase-trivial phase and topological phase-vacuum may possess different properties. This is demonstrated on an example of heterostructures based on thick topological Hg1-xCdxTe films, in which the PT-symmetric terahertz photoconductivity is observed. It is shown that the effect originates from features of the interface topological film-trivial buffer/cap layer. The PT-symmetric terahertz photoconductivity is not provided by electron states formed at the interface topological film-vacuum.
RESUMO
We report on observation of strong non-local photoconducitivity induced by terahertz laser pulses in non-zero magnetic field in heterostructures based on Hg1-xCdxTe films being in the topological phase. While the zero-field non-local photoconductivity is negligible, it is strongly enhanced in magnetic fields ~ 0.05 T resulting in appearance of an edge photocurrent that exceeds the respective dark signal by orders of magnitude. This photocurrent is chiral, and the chirality changes every time the magnetic field or the electric bias is reversed. Appearance of the non-local terahertz photoconductivity is attributed to features of the interface between the topological film and the trivial buffer.
RESUMO
We show that the terahertz (THz) photoconductivity in the topological phase of Hg1-xCdxTe-based structures exhibits the apparent PT- (parity-time) symmetry whereas the P-symmetry and the T-symmetry, separately, are not conserved. Moreover, it is demonstrated that the P- and T-symmetry breaking may not be related to any type of the sample anisotropy. This result contradicts the apparent symmetry arguments and means that there exists an external factor that interacts with the sample electronic system and breaks the symmetry. We show that deviations from the ideal experimental geometry may not be such a factor.
RESUMO
We suggest a method for detection of highly conductive surface electron states including topological ones. The method is based on measurements of the photoelectromagnetic effect using terahertz laser pulses. In contrast to conventional transport measurements, the method is not sensitive to the bulk conductivity. The method is demonstrated on an example of topological crystalline insulators Pb(1-x)SnxSe. It is shown that highly conductive surface electron states are present in Pb(1-x)SnxSe both in the inverse and direct electron energy spectrum.
RESUMO
A nonequilibrium population of spin-up and spin-down states in quantum well structures has been achieved applying circularly polarized radiation. The spin polarization results in a directed motion of free carriers in the plane of a quantum well perpendicular to the direction of light propagation. Because of the spin selection rules the direction of the current is determined by the helicity of the light and can be reversed by switching the helicity from right to left handed. A microscopic model is presented which describes the origin of the photon helicity driven current. The model suggests that the system behaves as a battery which generates a spin polarized current.
RESUMO
Spin-sensitive bleaching of the absorption of far-infrared radiation has been observed in p-type GaAs/AlGaAs quantum well structures. The absorption of circularly polarized radiation saturates at lower intensities than that of linearly polarized light due to monopolar spin orientation in the first heavy-hole subband. Spin relaxation times of holes in p-type material in the range of tens of ps were derived from the intensity dependence of the absorption.