Does Urea Preferentially Interact with Amide Moieties or Nonpolar Sidechains? A Question Answered Through a Judicious Selection of Model Systems.

The transfer model suggests that urea unfolds proteins mainly by increasing the solubility of the amide backbone, probably through urea-induced increase in hydrogen bonding. Other studies suggest that urea addition increases the magnitude of solvent-solute van der Waals interactions, which increases the solubility of nonpolar sidechains. More recent analyses hypothesize that urea has a similar effect in increasing the solubility of backbone and sidechain groups. In this work, we compare the effects of urea addition on the solvation of amides and alkyl groups. At first, we study the effects of urea addition upon solvent hydrogen bonding acidity and basicity through the perturbation in the fluorescence spectrum of probes 1-AN and 1-DMAN. Our results demonstrate that the solvent's hydrogen bonding properties are minimally affected by urea addition. Subsequently, we show that urea addition does not perturb the intra-molecular hydrogen bonding in salicylic acid significantly. Finally, we investigate how urea preferentially interacts with amide and alkyl groups moieties in water by comparing the effects of urea addition upon the solubility of acetaminophen and 4-tertbutylphenol. We show that urea affects amide and t-butyl solubility (lowers the transfer free energy of both amide (backbone) and alkyl (sidechain) groups) in a similar fashion. In other words, preferential interaction of urea with both moieties contributes to protein denaturation.

Lovo-cel gene therapy for sickle cell disease: Treatment process evolution and outcomes in the initial groups of the HGB-206 study.

lovo-cel (bb1111; LentiGlobin for sickle cell disease [SCD]) gene therapy (GT) comprises autologous transplantation of hematopoietic stem and progenitor cells transduced with the BB305 lentiviral vector encoding a modified ß-globin gene (ßA-T87Q ) to produce anti-sickling hemoglobin (HbAT87Q ). The efficacy and safety of lovo-cel for SCD are being evaluated in the ongoing phase 1/2 HGB-206 study (ClinicalTrials.gov: NCT02140554). The treatment process evolved over time, using learnings from outcomes in the initial patients to optimize lovo-cel's benefit-risk profile. Following modest expression of HbAT87Q in the initial patients (Group A, n = 7), alterations were made to the treatment process for patients subsequently enrolled in Group B (n = 2, patients B1 and B2), including improvements to cell collection and lovo-cel manufacturing. After 6 months, median Group A peripheral blood vector copy number (≥0.08 c/dg) and HbAT87Q levels (≥0.46 g/dL) were inadequate for substantial clinical effect but stable and sustained over 5.5 years; both markedly improved in Group B (patient B1: ≥0.53 c/dg and ≥2.69 g/dL; patient B2: ≥2.14 c/dg and ≥6.40 g/dL, respectively) and generated improved biologic and clinical efficacy in Group B, including higher total hemoglobin and decreased hemolysis. The safety of the lovo-cel for SCD treatment regimen largely reflected the known side effects of HSPC collection, busulfan conditioning regimen, and underlying SCD; acute myeloid leukemia was observed in two patients in Group A and deemed unlikely related to insertional oncogenesis. Changes made during development of the lovo-cel treatment process were associated with improved outcomes and provide lessons for future SCD GT studies.

Shock Tube/Laser Absorption Measurements of Cyclopentadiene Pyrolysis.

High-temperature cyclopentadiene pyrolysis was examined behind reflected shock waves in a heated shock tube using several laser absorption diagnostic schemes. A two-color, online-offline sensor near 3335 cm-1 was used to measure time histories of acetylene, while a three-color scheme of diagnostics at 10.532, 10.675, and 11.345 µm yielded measurements of cyclopentadiene and ethylene. Species time histories of cyclopentadiene decomposition and acetylene formation as well as ethylene yields are reported from 1319 to 1678 K at 1.2-1.5 atm. In addition, the overall decomposition rate of cyclopentadiene is reported, and comparisons are made to a number of kinetic models.

Gene Therapy in Patients with Transfusion-Dependent ß-Thalassemia.

BACKGROUND: Donor availability and transplantation-related risks limit the broad use of allogeneic hematopoietic-cell transplantation in patients with transfusion-dependent ß-thalassemia. After previously establishing that lentiviral transfer of a marked ß-globin (ßA-T87Q) gene could substitute for long-term red-cell transfusions in a patient with ß-thalassemia, we wanted to evaluate the safety and efficacy of such gene therapy in patients with transfusion-dependent ß-thalassemia. METHODS: In two phase 1-2 studies, we obtained mobilized autologous CD34+ cells from 22 patients (12 to 35 years of age) with transfusion-dependent ß-thalassemia and transduced the cells ex vivo with LentiGlobin BB305 vector, which encodes adult hemoglobin (HbA) with a T87Q amino acid substitution (HbAT87Q). The cells were then reinfused after the patients had undergone myeloablative busulfan conditioning. We subsequently monitored adverse events, vector integration, and levels of replication-competent lentivirus. Efficacy assessments included levels of total hemoglobin and HbAT87Q, transfusion requirements, and average vector copy number. RESULTS: At a median of 26 months (range, 15 to 42) after infusion of the gene-modified cells, all but 1 of the 13 patients who had a non-ß0/ß0 genotype had stopped receiving red-cell transfusions; the levels of HbAT87Q ranged from 3.4 to 10.0 g per deciliter, and the levels of total hemoglobin ranged from 8.2 to 13.7 g per deciliter. Correction of biologic markers of dyserythropoiesis was achieved in evaluated patients with hemoglobin levels near normal ranges. In 9 patients with a ß0/ß0 genotype or two copies of the IVS1-110 mutation, the median annualized transfusion volume was decreased by 73%, and red-cell transfusions were discontinued in 3 patients. Treatment-related adverse events were typical of those associated with autologous stem-cell transplantation. No clonal dominance related to vector integration was observed. CONCLUSIONS: Gene therapy with autologous CD34+ cells transduced with the BB305 vector reduced or eliminated the need for long-term red-cell transfusions in 22 patients with severe ß-thalassemia without serious adverse events related to the drug product. (Funded by Bluebird Bio and others; HGB-204 and HGB-205 ClinicalTrials.gov numbers, NCT01745120 and NCT02151526 .).

Hematopoietic Stem-Cell Gene Therapy for Cerebral Adrenoleukodystrophy.

BACKGROUND: In X-linked adrenoleukodystrophy, mutations in ABCD1 lead to loss of function of the ALD protein. Cerebral adrenoleukodystrophy is characterized by demyelination and neurodegeneration. Disease progression, which leads to loss of neurologic function and death, can be halted only with allogeneic hematopoietic stem-cell transplantation. METHODS: We enrolled boys with cerebral adrenoleukodystrophy in a single-group, open-label, phase 2-3 safety and efficacy study. Patients were required to have early-stage disease and gadolinium enhancement on magnetic resonance imaging (MRI) at screening. The investigational therapy involved infusion of autologous CD34+ cells transduced with the elivaldogene tavalentivec (Lenti-D) lentiviral vector. In this interim analysis, patients were assessed for the occurrence of graft-versus-host disease, death, and major functional disabilities, as well as changes in neurologic function and in the extent of lesions on MRI. The primary end point was being alive and having no major functional disability at 24 months after infusion. RESULTS: A total of 17 boys received Lenti-D gene therapy. At the time of the interim analysis, the median follow-up was 29.4 months (range, 21.6 to 42.0). All the patients had gene-marked cells after engraftment, with no evidence of preferential integration near known oncogenes or clonal outgrowth. Measurable ALD protein was observed in all the patients. No treatment-related death or graft-versus-host disease had been reported; 15 of the 17 patients (88%) were alive and free of major functional disability, with minimal clinical symptoms. One patient, who had had rapid neurologic deterioration, had died from disease progression. Another patient, who had had evidence of disease progression on MRI, had withdrawn from the study to undergo allogeneic stem-cell transplantation and later died from transplantation-related complications. CONCLUSIONS: Early results of this study suggest that Lenti-D gene therapy may be a safe and effective alternative to allogeneic stem-cell transplantation in boys with early-stage cerebral adrenoleukodystrophy. Additional follow-up is needed to fully assess the duration of response and long-term safety. (Funded by Bluebird Bio and others; STARBEAM ClinicalTrials.gov number, NCT01896102 ; ClinicalTrialsRegister.eu number, 2011-001953-10 .).

Determination of the JP10 + OH → Product Reaction Rate with Measured Fuel Concentrations in Shock Tube Experiments.

The overall reaction rate for JP10 + OH → products was measured directly via laser absorption of OH in shock tube experiments from 931 to 1308 K and 0.94 to 1.44 atm. The JP10 concentration of test gas mixtures was measured in the shock tube for several experiments using a 3.39 µm laser fuel diagnostic. The measured JP10 concentrations indicated fuel losses due to adsorption of 11-31% compared to values calculated manometrically from mixture preparation. OH was generated via rapid thermal decomposition of tert-butyl hydroperoxide behind reflected shock waves, and post-shock OH profiles were measured via laser absorption at 308.6 nm. The measured OH profiles were fit with a chemical kinetic model for JP10 chemistry to determine the overall JP10 + OH reaction rate. A recommendation is made for the JP10 + OH overall reaction rate over the temperature range explored in this study as k1 (931-1308 K) = 1.622 × 1014 exp(-1826/T [K]) ± 12%. To the authors' knowledge, these data are the first direct measurements of the overall reaction rate for JP10 + OH.

Shock Tube Measurement of the CH3 + C2H6 → CH4 + C2H5 Rate Constant.

The rate constant for the CH3 + C2H6 → CH4 + C2H5 reaction was studied behind reflected shock waves at temperatures between 1369 and 1626 K and pressures from 8.6 to 47.4 atm in mixtures of methane, ethane, and argon. Ethylene time histories were measured using laser absorption of radiation from a carbon dioxide gas laser near 10.532 µm. The resulting rate constant data can be represented by the Arrhenius equation k (T) = 3.90 × 1013 exp(-16670 cal/mol/RT) cm3 mol-1 s-1. We believe this is the first study to extend experimental data for this rate constant to temperatures above 1400 K. The overall 2σ uncertainty of the current data is +18%/-21% resulting primarily from uncertainties associated with the influence of secondary reactions and the fitting of rapidly changing species time histories at the higher temperatures.

Shock Tube Measurement of the C2H4 + H ⇔ C2H3 + H2 Rate Constant.

The rate constant for the reaction C2H4 + H ⇔ C2H3 + H2 was studied behind reflected shock waves at temperatures between 1619 and 1948 K and pressures near 10 atm in a mixture of C2H4, CH4, H2, and argon. C2H4 time histories were measured using laser absorption of a CO2 gas laser near 10.53 µm. Experimental mixtures were designed to optimize sensitivity to the title reaction with only weak sensitivity to secondary reactions. Two mechanisms, FFCM1 and ARAMCO v2, are used for data analysis. The well-selected operating conditions and Monte Carlo sampling data analysis procedure resulted in mechanism-independent reaction rate constant measurements with a 2σ uncertainty of ±35%. The current data disagree with a broadly used theoretical calculation (Knyazev et al. (1996)), but they are in good consensus with one of the review studies (Baulch et al. (2005)), k = (3.9 × 1022) T3.62 exp(-5670/ T) cm3 molecule-1 s-1. To the best of our knowledge, this work provides the first high-temperature study of the C2H4 + H ⇔ C2H3 + H2 reaction rate constant with well-defined uncertainty.

Insights into the RNA quadruplex binding specificity of DDX21.

Guanine quadruplexes can form in both DNA and RNA and influence many biological processes through various protein interactions. The DEAD-box RNA helicase protein DDX21 has been shown to bind and remodel RNA quadruplexes but little is known about its specificity for different quadruplex species. Previous reports have suggested DDX21 may interact with telomeric repeat containing RNA quadruplex (TERRA), an integral component of the telomere that contributes to telomeric heterochromatin formation and telomere length regulation. Here we report that the C-terminus of DDX21 directly interacts with TERRA. We use, for the first time, 2D saturation transfer difference NMR to map the protein binding site on a ribonucleic acid species and show that the quadruplex binding domain of DDX21 interacts primarily with the phosphoribose backbone of quadruplexes. Furthermore, by mutating the 2'OH of loop nucleotides we can drastically reduce DDX21's affinity for quadruplex, indicating that the recognition of quadruplex and specificity for TERRA is mediated by interactions with the 2'OH of loop nucleotides.

What Is the Risk of Revision Surgery in Hydroxyapatite-coated Femoral Hip Stems? Findings From a Large National Registry.

BACKGROUND: Despite wide adoption of hydroxyapatite (HA)-coated femoral stems in THA, no studies have found differences in the risk of revision surgery with its use or investigated the interaction of different prosthesis designs with stem coating. QUESTIONS/PURPOSES: The purpose of this study was to evaluate the risk of revision in THAs with HA-coated stems compared with non-HA-coated. To achieve this purpose, we asked: (1) What is the difference in risk of revision of THAs with HA-coated femoral stems compared with non-HA-coated using an aggregate analysis? (2) What is the difference in risk of revision of THAs with HA-coated femoral stems compared with non-HA-coated for five prosthesis types that used the same femoral and acetabular component combination but where the femoral stem had both a HA and non-HA coating option? METHODS: The Australian Orthopaedic Association National Joint Replacement Registry analyzed cementless primary THA registered between September 1, 1999, and December 31, 2014. Of the 147,645 cases that fit our selection criteria, 81.1% (N = 119,673) had HA-coated stems. Overall (that is, all procedures with any prostheses in the registry) and five prosthesis designs where both an HA-coated stem and non-HA-coated stem exist (Zimmer's VerSys®/Trilogy® [N = 3924], Biomet's Mallory-Head®/Mallory-Head [N = 2538], Smith & Nephew's SL-Plus/EP Fit-Plus [N = 2028], Biomet's Taperloc®/Exceed [N = 1668], and Biomet's Taperloc/Mallory-Head [N = 1240]) were evaluated. Revision surgery was the outcome of interest. Survival analyses were conducted and hazard ratios (HRs) were adjusted for age, sex, bearing surface, femoral head size, and acetabular component HA coating. RESULTS: In the overall cohort, HA stems had a lower any-cause revision risk after 6 months (HR, 0.83; 95% confidence interval [CI], 0.72-0.95; p = 0.007). However, the risk of revision varied when we evaluated the effect of HA on revision for specific prothesis combinations that had both HA and non-HA options for the femoral stem. VerSys/Trilogy, Mallory-Head/Mallory-Head, Taperloc/Exceed, and Taperloc/Mallory-Head did not have a lower risk of any-cause revision with HA-coated stems compared with non-HA-coated. Only the SL-Plus/EP Fit-Plus subgroup showed a lower risk of revision for loosening (HR, 0.17; 95% CI, 0.06-0.44 between 0 and 7 years; p < 0.001) with HA- compared with non-HA-coated stems, but this was observed after an early (< 6 months) higher risk of revision for any reason (HR, 2.88; 95% CI, 1.15-7.21; p = 0.024). CONCLUSIONS: Overall, HA coating of femoral stems was found to be associated with a 17% lower risk of revision for any reason. However, the lower risk of revision associated with HA was not consistent for all prosthesis designs where both HA- and non-HA-coated femoral stem versions were available. Some HA-coated stems have higher revision rates compared with their non-HA-coated versions. Our findings suggest that the effect of HA coating on revision risk varies depending on prosthesis design. LEVEL OF EVIDENCE: Level II, therapeutic study.

Unicompartmental Knee Arthroplasty Revision to TKA: Are Tibial Stems and Augments Associated With Improved Survivorship?

BACKGROUND: Some surgeons contend that unicompartmental knee arthroplasty (UKA) can easily be revised to a TKA when revision is called for, whereas others believe that this can be complex and technically demanding. There has been little research regarding the efficacy or rationale of using metal augmentation and tibial stem extensions when revising a UKA to a TKA. QUESTION/PURPOSES: (1) Is the use of stem extensions for the tibial component associated with increased survival when revising a UKA to a TKA? (2) Is the addition of modular augments associated with increased survival compared with stem extensions alone? (3) Is TKA design (minimally stabilized versus posterior-stabilized) or (4) tibial fixation (cemented versus cementless) associated with differences in survivorship? METHODS: Data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) were used to analyze implant survival after revision of a UKA to a TKA, comparing results in which tibial components were used with and without modular components. The groups analyzed were TKA without a stem extension, those in which a tibial stem extension was used, and those in which a tibial stem extension was used together with an augment. There were 4438 revisions of UKAs to TKAs available for analysis. The mean duration of followup of patients having the TKA revisions was 5 years (SD, 3.5 years). There were 2901 (65%) procedures in which a tibial stem extension was not used, 870 (20%) procedures with a tibial stem extension, and 667 (15%) with a tibial stem extension and metallic augment. Kaplan-Meier estimates of survivorship were calculated and hazard ratios (HRs) from Cox proportional hazard models, adjusting for age and sex, were used to compare the rate of revision among groups. The overall 10-year cumulative percent revision (CPR) for UKA revised to a TKA was 16%. RESULTS: At 10 years, the CPR was increased when a stem extension was not used (19%; 95% confidence interval [CI],16.5-20.7 without a stem extension compared with 13%; 95% CI, 9.2-17.0 with a stem extension; entire period HR, 1.44; 95% CI, 1.10-1.89; p = 0.007). There was no difference in the 10-year CPR when an augment was used together with a stem extension compared with a stem extension alone (HR, 1.26; 95% CI, 0.85-1.86; p = 0.251). When minimally stabilized and posterior-stabilized TKAs were compared, there was no difference in survivorship. Minimally stabilized TKA designs without stem extensions showed higher CPR compared with when stem extensions were used (HR, 1.77; 95% CI, 1.16-2.70; p = 0.007), whereas posterior-stabilized designs without stem extensions showed higher CPR only when compared with when stem extensions and augments were both used (HR, 2.16; 95% CI, 1.24-3.77; p = 0.006). Cementless fixation of the tibial component resulted in a higher CPR than when cement was used (HR, 1.36; 95% CI 1.08-1.71; p = 0.008). CONCLUSIONS: In this registry study, the risk of repeat revision after revision of a UKA to a TKA was lower when a tibial stem extension was used, but no such difference was found with respect to augments. Our study did not account for the degree of bone loss or surgeon preference when considering stems and augments. Further research to establish the degree of bone loss associated with UKA to TKA revision procedures will help clarify these findings. LEVEL OF EVIDENCE: Level III, therapeutic study.

Shock Tube and Laser Absorption Study of CH2O Oxidation via Simultaneous Measurements of OH and CO.

The oxidation of Ar-diluted stoichiometric CH2O-O2 mixtures was studied behind reflected shock waves over temperatures of 1332-1685 K, at pressures of about 1.5 atm and initial CH2O mole fractions of 500, 1500, and 5000 ppm. Quantitative and time-resolved concentration histories of OH and CO (at both v″ = 0 and v″ = 1) were measured by narrow-linewidth laser absorption at 306.7 and 4854 nm, respectively. A time delay was observed between the formation of v″ = 0 and v″ = 1 states of CO, suggesting that CO was kinetically generated primarily in the ground state and then collisionally relaxed toward vibrational equilibrium. The measured CO and OH time-histories were used to evaluate the performance of four detailed reaction mechanisms regarding the oxidation chemistry of CH2O. Further analyses of these time-history data have also led to improved determination for the rate constants of two key reactions, namely H + O2 = O + OH (R1) and OH + CO = CO2 + H (R2), as follows: k1 = 8.04 × 1013 exp(-7370 K/T) cm3 mol-1 s-1, k2 = 1.90 × 1012 exp(-2760 K/T) cm3 mol-1 s-1; both expressions are valid over 1428-1685 K and have 1σ uncertainties of approximately ±10%.

Combined Ab Initio, Kinetic Modeling, and Shock Tube Study of the Thermal Decomposition of Ethyl Formate.

The potential energy surfaces (PESs) and reaction rate constants of the unimolecular decomposition of ethyl formate (EF) were investigated using high-precision theoretical methods at the CCSD(T)/CBS(T-Q)//M06-2X/6-311++G(d,p) level of theory. The calculated PESs of EF dissociation and molecular decomposition reactions indicate that the intramolecular H-shift to produce formic acid and ethylene is the dominant decomposition pathway. A detailed chemical kinetic mechanism for EF pyrolysis was constructed by incorporating the important reactions of EF and its radicals into an existing mechanism previously developed for small methyl esters. The updated mechanism was first used to reproduce CO, CO2, and H2O concentration time histories during EF pyrolysis in the shock tube reported by Ren et al. [ Ren , W. , Mitchell Spearrin , R. , Davidson , D. F. , and Hanson , R. K. J. Phys. Chem. A 2014 , 118 , 1785 - 1798 ]. The rate of production and sensitivity analyses show that the competing dehydration and decarboxylation channels of the intermediate formic acid control the final product yields of EF pyrolysis. The EF mechanism was further validated against the shock tube data of OH, CO, CO2, and H2O time histories measured during EF oxidation (equivalence ratio Φ = 1.0) at 1331-1615 K and 1.52-1.74 atm. This revised EF mechanism captured all of the species' time histories over the entire temperature range. Such modeling capability was due to the more accurate rate constants of EF reactions determined by high-precision theoretical calculations and a high-fidelity C0-C2 basis mechanism.

Cavity-enhanced absorption spectroscopy with a ps-pulsed UV laser for sensitive, high-speed measurements in a shock tube.

We report the first application of cavity-enhanced absorption spectroscopy (CEAS) with a ps-pulsed UV laser for sensitive and rapid gaseous species time-history measurements in a transient environment (in this study, a shock tube). The broadband nature of the ps pulses enabled instantaneous coupling of the laser beam into roughly a thousand cavity modes, which grants excellent immunity to laser-cavity coupling noise in environments with heavy vibrations, even with an on-axis alignment. In this proof-of-concept experiment, we demonstrated an absorption gain of 49, which improved the minimum detectable absorbance by ~20 compared to the conventional single-pass strategy at similar experimental conditions. For absorption measurements behind reflected shock waves, an effective time-resolution of ~2 µs was achieved, which enabled time-resolved observations of transient phenomena, such as the vibrational relaxation of O(2) demonstrated here. The substantial improvement in detection sensitivity, together with microsecond measurement resolution implies excellent potential for studies of transient physical and chemical processes in nonequilibrium situations, particularly via measurements of weak absorptions of trace species in dilute reactive systems.

Improved Shock Tube Measurement of the CH4 + Ar = CH3 + H + Ar Rate Constant using UV Cavity-Enhanced Absorption Spectroscopy of CH3.

We report an improved measurement for the rate constant of methane dissociation in argon (CH4 + Ar = CH3 + H + Ar) behind reflected shock waves. The experiment was conducted using a sub-parts per million sensitivity CH3 diagnostic recently developed in our laboratory based on ultraviolet cavity-enhanced absorption spectroscopy. The high sensitivity of this diagnostic allowed for measurements of quantitatively resolved CH3 time histories during the initial stage of CH4 pyrolysis, where the reaction system is clean and free from influences of secondary reactions and temperature change. This high sensitivity also allowed extension of our measurement range to much lower temperatures (<1500 K). The current-reflected shock measurements were performed at temperatures between 1487 and 1866 K and pressures near 1.7 atm, resulting in the following Arrhenius rate constant expression for the title reaction: k(1.7 atm) = 3.7 × 10(16) exp(-42 200 K/T) cm(3)/mol·s, with a 2σ uncertainty factor of 1.25. The current data are in good consensus with various theoretical and review studies, but at the low temperature end they suggest a slightly higher (up to 35%) rate constant compared to these previous results. A re-evaluation of previous and current experimental data in the falloff region was also performed, yielding updated expressions for both the low-pressure limit and the high-pressure limit rate constants and improved agreement with all existing data.

Shock Tube Measurement for the Dissociation Rate Constant of Acetaldehyde Using Sensitive CO Diagnostics.

The rate constant of acetaldehyde thermal dissociation, CH3CHO = CH3 + HCO, was measured behind reflected shock waves at temperatures of 1273-1618 K and pressures near 1.6 and 0.34 atm. The current measurement utilized sensitive CO diagnostics to track the dissociation of CH3CHO via oxygen atom balance and inferred the title rate constant (k1) from CO time histories obtained in pyrolysis experiments of 1000 and 50 ppm of CH3CHO/Ar mixtures. By using dilute test mixtures, the current study successfully suppressed the interferences from secondary reactions and directly determined the title rate constant as k1(1.6 atm) = 1.1 × 10(14) exp(-36 700 K/T) s(-1) over 1273-1618 K and k1(0.34 atm) = 5.5 × 10(12) exp(-32 900 K/T) s(-1) over 1377-1571 K, with 2σ uncertainties of approximately ±30% for both expressions. Example simulations of existing reaction mechanisms updated with the current values of k1 demonstrated substantial improvements with regards to the acetaldehyde pyrolysis chemistry.

Kinetics of Excited Oxygen Formation in Shock-Heated O2-Ar Mixtures.

The formation of electronically excited atomic oxygen was studied behind reflected shock waves using cavity-enhanced absorption spectroscopy. Mixtures of 1% O2-Ar were shock-heated to 5400-7500 K, and two distributed-feedback diode lasers near 777.2 and 844.6 nm were used to measure time-resolved populations of atomic oxygen's 5S° and 3S° electronic states, respectively. Measurements were compared with simulated population time histories obtained using two different kinetic models that accounted for thermal nonequilibrium effects: (1) a multitemperature model and (2) a reduced collisional-radiative model. The former assumed a Boltzmann distribution of electronic energy, whereas the latter allowed for non-Boltzmann populations by treating the probed electronic states as pseudospecies and accounting for dominant electronic excitation/de-excitation processes. The effects of heavy-particle collisions were investigated and found to play a major role in the kinetics of O atom electronic excitation at the conditions studied. For the first time, rate constants (kM) for O atom electronic excitation from the ground state (3P) due to collisions with argon atoms were directly inferred using the reduced collisional-radiative model, kM(3P → 5S°) = 7.8 × 10-17T0.5 exp(-1.061 × 105K/T) ± 25% cm3 s-1 and kM(3P → 3S°) = 2.5 × 10-17T0.5 exp(-1.105 × 105K/T) ± 25% cm3 s-1.

Shock Tube Measurement of the High-Temperature Rate Constant for OH + CH3 → Products.

The reaction between hydroxyl (OH) and methyl radicals (CH3) is critical to hydrocarbon oxidation. Motivated by the sparseness of its high-temperature rate constant data and the large uncertainties in the existing literature values, the current study has remeasured the overall rate constant of the OH + CH3 reaction and extended the measurement temperature range to 1214-1933 K, using simultaneous laser absorption diagnostics for OH and CH3 radicals behind incident and reflected shock waves. tert-Butyl hydroperoxide and azomethane were used as pyrolytic sources for the OH and CH3 radicals, respectively. The current study bridged the temperature ranges of existing experimental data, and good agreement is seen between the current measurement and some previous experimental and theoretical high-temperature studies. A recommendation for the rate constant expression of the title reaction, based on the weighted average of the high-temperature data from selected studies, is given by k1 = 4.19 × 10(1)(T/K)(3.15) exp(5270 K/T) cm(3) mol(-1) s(-1) ±30%, which is valid over 1000-2500 K.

Shock-Tube Measurement of Acetone Dissociation Using Cavity-Enhanced Absorption Spectroscopy of CO.

A direct measurement for the rate constant of the acetone dissociation reaction (CH3COCH3 = CH3CO + CH3) was conducted behind reflected shock wave, utilizing a sub-ppm sensitivity CO diagnostic achieved by cavity-enhanced absorption spectroscopy (CEAS). The current experiment eliminated the influence from secondary reactions and temperature change by investigating the clean pyrolysis of <20 ppm acetone in argon. For the first time, the acetone dissociation rate constant (k1) was directly measured over 5.5 orders of magnitude with a high degree of accuracy: k1 (1004-1494 K, 1.6 atm) = 4.39 × 10(55) T(-11.394) exp(-52 140K/T) ± 24% s(-1). This result was seen to agree with most previous studies and has bridged the gap between their temperature and pressure conditions. The current work also served as an example demonstration of the potential of using the CEAS technique in shock-tube kinetics studies.

Shock-tube measurements of excited oxygen atoms using cavity-enhanced absorption spectroscopy.

We report the use of cavity-enhanced absorption spectroscopy (CEAS) using two distributed feedback diode lasers near 777.2 and 844.6 nm for sensitive, time-resolved, in situ measurements of excited-state populations of atomic oxygen in a shock tube. Here, a 1% O2/Ar mixture was shock-heated to 5400-8000 K behind reflected shock waves. The combined use of a low-finesse cavity, fast wavelength scanning of the lasers, and an off-axis alignment enabled measurements with 10 µs time response and low cavity noise. The CEAS absorption gain factors of 104 and 142 for the P35←S520 (777.2 nm) and P0,1,23←S310 (844.6 nm) atomic oxygen transitions, respectively, significantly improved the detection sensitivity over conventional single-pass measurements. This work demonstrates the potential of using CEAS to improve shock-tube studies of nonequilibrium electronic-excitation processes at high temperatures.