A Novel Apparatus for the Fully Automated Extraction and Online Liquid Chromatographic Analysis of Solid Environmental Samples: Application to the Pressurized Hot Water Extraction of Pharmaceuticals in Soil.

A new self-assembled apparatus for the extraction of solid samples was designed and implemented to perform a recirculated pressurized hot water extraction (R-PHWE) directly coupled to liquid chromatography-tandem mass spectrometry. To investigate the potential of this new extraction apparatus, 34 target pharmaceutical compounds were analyzed in loam, silt-loam, and silty-clay-loam soils. The target analytes were characterized by heterogeneous physicochemical properties (e.g., -1.60 ≤ log D ≤ 5.91 at pH = 7.2, i.e., at the mean pH values of the three soils). Design of experiments (DoE) was used to identify the best extraction conditions for the target analytes by studying temperature, pressure, and number of extraction cycles. The results of DoE optimization pointed out the significant influence of the number of cycles on recovery. The application of DoE set point to the three reference soils provided recoveries ≥60% for 21-25 out the 34 target analytes, depending on soil. Good recovery precision (<25%) and moderate suppressive matrix effect (≤40%) were found for most target analytes, regardless of the soil considered. The optimized R-PHWE procedure evidenced statistically higher recoveries for 16 out of 34 target analytes when compared to conventional off-line dynamic PHWE.

Biochar from co-pyrolysis of biological sludge and sawdust in comparison with the conventional filling media of vertical-flow constructed wetlands for the treatment of domestic-textile wastewater.

A biochar from co-pyrolysis of a mixture of sawdust and biological sludge (70/30, w/w), providing a high environmental compatibility in terms of water leachable polycyclic aromatic hydrocarbons and inorganic elements, together with a remarkable surface area (389 m2/g), was integrated into laboratory-scale vertical-flow constructed wetlands (VF-CWs), planted with Phragmites australis and unplanted. Biochar-filled VF-CWs have been tested for 8 months for the refining of effluents from the tertiary clariflocculation stage of a wastewater treatment plant operating in a mixed domestic-industrial textile context, in comparison with systems filled with gravel. VF-CW influents and effluents were monitored for chemical oxygen demand (COD), nitrogen and phosphorus cycles, and absorbance values at 254 and 420 nm, the latter as rapid and reliable screening parameters of the removal of organic micropollutants containing aromatic moieties and/or chromophores. Biochar-based systems provided a statistically significant improvement in COD (Δ = 22%) and ammonia (Δ = 35%) removal, as well as in the reduction of UV-Vis absorbance values (Δ = 32-34% and Δ = 28% for 254 and 420 nm, respectively), compared to gravel-filled microcosms. The higher removal of organic was mainly attributed to the well-known adsorption properties of biochars, while for nitrogen the biological mechanisms seem to play a predominant role.

Electrochemical sensors based on sewage sludge-derived biochar for the analysis of anthocyanins in berry fruits.

The reutilization of waste and the reduction of the general environmental impact of every production are fundamental goals that must be achieved in the framework of a circular economy. Recycled carbon-rich materials may represent a promising alternative to other less-sustainable carbonaceous materials used in the production of electrochemical sensing platforms. Herein, we propose an innovative carbon paste electrode (CPE) composed of biochar derived from biological sludge obtained from municipal and industrial wastewater treatment plants. The physicochemical properties of the biochar after a chemical treatment with an acidic solution obtained from industrial by-products were investigated. The electrode surface characterization was carried out by analyzing common redox probes and multiple phenols bearing varying numbers of -OH and -OCH3 groups in their structure. Furthermore, the CPE was also tested on the evaluation of the phenolic fingerprints of Vaccinium myrtillus, Vaccinium uliginosum subsp. gaultherioides, and Fragaria × ananassa. Standard anthocyanin mixtures and extracts of the aforementioned fruits were analyzed to provide a phenolic characterization of real samples. The obtained results show that the sewage sludge-derived biochar can be a promising material for the development of electroanalytical sensors.

Comparison of chemometric strategies for potential exposure marker discovery and false-positive reduction in untargeted metabolomics: application to the serum analysis by LC-HRMS after intake of Vaccinium fruit supplements.

Untargeted liquid chromatographic-high-resolution mass spectrometric (LC-HRMS) metabolomics for potential exposure marker (PEM) discovery in nutrikinetic studies generates complex outputs. The correct selection of statistically significant PEMs is a crucial analytical step for understanding nutrition-health interactions. Hence, in this paper, different chemometric selection workflows for PEM discovery, using multivariate or univariate parametric or non-parametric data analyses, were comparatively tested and evaluated. The PEM selection protocols were applied to a small-sample-size untargeted LC-HRMS study of a longitudinal set of serum samples from 20 volunteers after a single intake of (poly)phenolic-rich Vaccinium myrtillus and Vaccinium corymbosum supplements. The non-parametric Games-Howell test identified a restricted group of significant features, thus minimizing the risk of false-positive retention. Among the forty-seven PEMs exhibiting a statistically significant postprandial kinetics, twelve were successfully annotated as purine pathway metabolites, benzoic and benzodiol metabolites, indole alkaloids, and organic and fatty acids, and five (i.e. octahydro-methyl-ß-carboline-dicarboxylic acid, tetrahydro-methyl-ß-carboline-dicarboxylic acid, citric acid, caprylic acid, and azelaic acid) were associated to Vaccinium berry consumption for the first time. The analysis of the area under the curve of the longitudinal dataset highlighted thirteen statistically significant PEMs discriminating the two interventions, including four intra-intervention relevant metabolites (i.e. abscisic acid glucuronide, catechol sulphate, methyl-catechol sulphate, and α-hydroxy-hippuric acid). Principal component analysis and sample classification through linear discriminant analysis performed on PEM maximum intensity confirmed the discriminating role of these PEMs.

Vaccinium myrtillus L. extract and its native polyphenol-recombined mixture have anti-proliferative and pro-apoptotic effects on human prostate cancer cell lines.

Vaccinium myrtillus berry extract (VME) and a recombined standard mixture (RSM) of its main native phenolic compounds were investigated for cell growth inhibition and pro-apoptotic activity on hormone-dependent (LNCaP) and hormone-independent (PC3 and DU-145) prostate cancer (PCa) cell lines. Normal prostate epithelial cells (PrEC) were also studied in comparison. VME hindered anchorage-dependent PCa cell proliferation in a dose-dependent manner, that is, at 1/800 (v/v) dilution for LNCaP and PC3, and 1/100 (v/v) dilution for DU-145 (corresponding to 14.15 and 113.2 µg cyanidin-3-O-glucoside equivalents per ml of culture medium), respectively. VME had a growth inhibitory effect towards PrEC at the same dilution of DU-145 cells although the IC50 values indicated that PrEC are more resistant than PCa cell lines. VME also reduced the anchorage-independent growth of PCa cells. The study of the apoptotic profile (i.e., non-apoptotic, early apoptotic, late apoptotic and necrotic cells) evidenced that the apoptotic rate (early+late) was statistically higher in all three cell lines exposed to VME compared to control. Anchorage-dependent and anchorage-independent growth inhibition of RSM was very similar to that displayed by VME. Moreover, RSM exerted its growth inhibitory effect also under hypoxia, the latter representing a biological condition known to sustain PCa proliferation and aggressiveness.

Characterization Techniques as Supporting Tools for the Interpretation of Biochar Adsorption Efficiency in Water Treatment: A Critical Review.

Over the past decade, biochar (BC) has received significant attention in many environmental applications, including water purification, since it is available as a low-cost by-product of the energetic valorisation of biomass. Biochar has many intrinsic characteristics, including its porous structure, which is similar to that of activated carbon (AC), which is the most widely used sorbent in water treatment. The physicochemical and performance characteristics of BCs are usually non-homogenously investigated, with several studies only evaluating limited parameters, depending on the individual perspective of the author. Within this review, we have taken an innovative approach to critically survey the methodologies that are generally used to characterize BCs and ACs to propose a comprehensive and ready-to-use database of protocols. Discussion about the parameters of chars that are usually correlated with adsorption performance in water purification is proposed, and we will also consider the physicochemical properties of pollutants (i.e., Kow). Uniquely, an adsorption efficiency index BC/AC is presented and discussed, which is accompanied by an economic perspective. According to our survey, non-homogeneous characterization approaches limit the understanding of the correlations between the pollutants to be removed and the physicochemical features of BCs. Moreover, the investigations of BC as an adsorption medium necessitate dedicated parallel studies to compare BC characteristics and performances with those of ACs.

Productivity and nutritional and nutraceutical value of strawberry fruits (Fragaria x ananassa Duch.) cultivated under irrigation with treated wastewaters.

BACKGROUND: Agriculture represents a productive sector typically characterized by a high water demand, whereas freshwater (FW) availability is a problem of increasing concern in the world and FW resources are becoming insufficient for sustaining agricultural irrigation. The reuse of treated wastewaters (TWWs) for crop irrigation could be an efficient tool for reducing water shortage. Hence, the present study evaluated the food quality of Fragaria x ananassa (cultivar Camarosa) fruits irrigated with four types of treated wastewaters (TWWs). Strawberries were analysed for yield, sucrose, fructose, glucose, total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and antiradical and antioxidant capacity. In addition, a targeted quantification of the most representative phenolic compounds of strawberry was performed. RESULTS: TWWs complied the Italian ministerial decree 185/2003 for wastewater reuse, with very few exceptions, mainly represented by chloride concentrations (258-643 mg L-1 versus a legal threshold of 250 mg L-1 ). The reuse of TWWs reduced fruit yield (10-26%) compared to irrigation with tap water as a control. Irrigation with TWWs gave also rise to the decrease of total sugars (14-26%), TSP (2-10%) and TMA (29-49%). Individual phenolic acids, flavonols and flavanols were quite stable in response to the irrigation with TWWs, whereas anthocyanidins decreased significantly. CONCLUSION: Although TWWs negatively affected fruit quality, the nutritional and nutraceutical parameters determined in the present study were in line with data previously reported for strawberries purchased in the market or cultivated in research orchards, thus suggesting that the use of TWWs does not prevent the fruit marketability. © 2020 Society of Chemical Industry.

Design and start-up of a constructed wetland as tertiary treatment for landfill leachates.

In this paper, the design and start-up of a constructed wetland (CW) for the tertiary treatment of landfill leachates is presented. The flux is characterized by high salinity, high concentration of nitrogen (almost completely in the form of nitrate) and a biochemical oxygen demand (BOD)/chemical oxygen demand (COD) ratio close to zero. The CW pilot plant suffered from mechanical and hydraulic malfunctions which led to an uneven growth of plants inside the tanks. Despite this, COD has been reduced in the range of 0-30%, reduced forms of N (ammonia and nitrite) are also oxidized and removed by 50-80% and 20-26% on average. Considering the low number of plants and the loading rate, CW pilot plant allowed to remove more than 16 kg of COD, leading to a specific removal of 10 gCOD/d · m2. Moreover, bacterial communities associated to plants were isolated and analyzed in order to evaluate the influence of such communities on phytoremediation. Bulk soil registered the lowest bacterial titers, while plant compartments and rhizospheric soil showed to be more suitable for bacterial colonization. Twenty-five different bacterial genera were observed among the analyzed isolates, with the predominance of Pseudomonas genus.

Liquid chromatographic/electrospray ionization quadrupole/time of flight tandem mass spectrometric study of polyphenolic composition of different Vaccinium berry species and their comparative evaluation.

Ultra-high-performance liquid chromatography coupled with high-resolution quadrupole-time of flight mass spectrometry with both negative and positive ionization was used for comprehensively investigating the phenolic and polyphenolic compounds in berries from three spontaneous or cultivated Vaccinium species (i.e., Vaccinium myrtillus, Vaccinium uliginosum subsp. gaultherioides, and Vaccinium corymbosum). More than 200 analytes, among phenolic and polyphenolic compounds belonging to the classes of anthocyanins, monomeric and oligomeric flavonols, flavanols, dihydrochalcones, phenolic acids, together with other polyphenolic compounds of mixed structural characteristics, were identified. Some of the polyphenols herein investigated, such as anthocyanidin glucuronides and malvidin-feruloyl-hexosides in V. myrtillus, or anthocyanindin aldopentosides and coumaroyl-hexosides in V. uliginosum subsp. gaultherioides and a large number of proanthocyanidins with high molecular weight in all species, were described for the first time in these berries. Principal component analysis applied on original LC-TOF data, acquired in survey scan mode, successfully discriminated the three Vaccinium berry species investigated, on the basis of their polyphenolic composition, underlying one more time the fundamental role of mass spectrometry for food characterization.

Fully automated on-line solid phase extraction coupled to liquid chromatography-tandem mass spectrometry for the simultaneous analysis of alkylphenol polyethoxylates and their carboxylic and phenolic metabolites in wastewater samples.

Three different sorbents (i.e. endcapped octadecylsilane, octasilane and styrene-N-vinylpiperidinone co-polymer) were investigated in order to develop an on-line solid phase extraction-liquid chromatographic tandem mass spectrometric method (on-line SPE-LC-MS/MS) for the simultaneous analysis of alkylphenols polyethoxylate (AP(n)EOs, n = 1-8) and corresponding monocarboxylate (AP1ECs) and phenolic (APs) metabolites. The endcapped octadecylsilane was selected due to its full compatibility with a chromatographic approach, which allowed the elution of positively and negatively ionisable compounds in two distinct retention time windows, using a water-acetonitrile-tetrahydrofuran ternary gradient and a pellicular pentafluorophenyl column. On this SPE sorbent, the composition of the loading/clean-up solution was then optimized in order to achieve the best recoveries of target analytes. Under the best experimental conditions, the total analysis time per sample was 25 min and method detection limits (MDLs) were in the sub-nanograms per litre to nanograms per litre range (0.0081-1.0 ng L(-1)) for AP(n)EOs with n = 2-8, AP1ECs and APs, whereas for AP1EOs, an MDL of about 50 ng L(-1) was found. Using the mass-labelled compound spiking technique, the method performance was tested on inlet and outlet wastewater samples from three activated sludge treatment plants managing domestic and industrial sewages of the urban areas and the textile district of Prato and Bisenzio valley (Tuscany, Italy); in most cases, apparent recovery percentages approximately in the ranges of 50-110% and 80-120% were found for inlet and outlet samples, respectively. The on-line SPE-LC-MS/MS analysis of wastewater samples highlighted the presence of target analytes at concentrations ranging from few nanograms per litre to thousands nanograms per litre, depending on the compound and matrix analysed. AP2ECs were also tentatively identified in outlet samples.

Analytical Quality by Design in pharmaceutical quality assurance: Development of a capillary electrophoresis method for the analysis of zolmitriptan and its impurities.

A fast and selective CE method for the determination of zolmitriptan (ZOL) and its five potential impurities has been developed applying the analytical Quality by Design principles. Voltage, temperature, buffer concentration, and pH were investigated as critical process parameters that can influence the critical quality attributes, represented by critical resolution values between peak pairs, analysis time, and peak efficiency of ZOL-dimer. A symmetric screening matrix was employed for investigating the knowledge space, and a Box-Behnken design was used to evaluate the main, interaction, and quadratic effects of the critical process parameters on the critical quality attributes. Contour plots were drawn highlighting important interactions between buffer concentration and pH, and the gained information was merged into the sweet spot plots. Design space (DS) was established by the combined use of response surface methodology and Monte Carlo simulations, introducing a probability concept and thus allowing the quality of the analytical performances to be assured in a defined domain. The working conditions (with the interval defining the DS) were as follows: BGE, 138 mM (115-150 mM) phosphate buffer pH 2.74 (2.54-2.94); temperature, 25°C (24-25°C); voltage, 30 kV. A control strategy was planned based on method robustness and system suitability criteria. The main advantages of applying the Quality by Design concept consisted of a great increase of knowledge of the analytical system, obtained throughout multivariate techniques, and of the achievement of analytical assurance of quality, derived by probability-based definition of DS. The developed method was finally validated and applied to the analysis of ZOL tablets.

The successful binomium of multivariate strategies and electrophoresis for the Quality by Design separation of a class of drugs: the case of triptans.

Quality by Design (QbD) approach was followed having as analytical target profile the determination of different antimigraine drugs (seven triptans, TRP) available on the market. Multivariate strategies were used for defining the design space and solvent-modified MEKC was the selected analytical method. The versatility of electrophoretic technique, allowing a fine modulation of experimental parameters, made it possible to define the design space (DS). The DS limited a suitable range of experimental parameters in which all possible combinations of variables led to an electrokinetic method able to determine all the considered analytes with a predefined quality. Design of experiments and risk analysis fully assisted the method development from the initial investigation of MEKC knowledge space to the DS definition and finally to the control strategy. Applying the working operative conditions, the baseline separation of TRP was obtained in less than 9 min. The method was finally used for the quantification of three TRP in different pharmaceutical products.

Evaluation of different QuEChERS procedures for the recovery of selected drugs and herbicides from soil using LC coupled with UV and pulsed amperometry for their detection.

Seven quick, easy, cheap, effective, rugged and safe (QuEChERS)-based procedures, differing in both the extraction and clean-up steps, were investigated for the recovery of bentazone (BTZ), atrazine (ATZ), carbamazepine (CBZ), phenytoin (PNT) and its metabolite 5-(p-hydroxyphenyl-),5-phenylhydantoin (HPPH) from soil. Target analytes were chosen for their extensive use and/or occurrence in soil, as well as for their medium-high polarity characteristics (log K OW values in the range 0.88-2.80), which have been reported as a critical parameter for the recovery from soil with QuEChERS approaches. Liquid chromatography coupled with UV and pulsed amperometric (PA) detection at a glassy carbon electrode was used as instrumental technique. The recovery data obtained within each tested procedure were discussed for each compound investigated, highlighting different behaviour depending on the specific physicochemical characteristics of the analytes. The optimized QuEChERS conditions consisted of the extraction of analytes with CH3CN:H2O 70:30, 5 % CH3COOH, followed by a dispersive solid-phase extraction (d-SPE) clean-up step with C18 sorbent. This method, in which water is directly added to the soil together with acetonitrile and salts, allowed the rehydration step to be avoided, which can be as long as 30 min. Matrix effects were evaluated for both the detection techniques at different concentration levels, and they were below 24 % for both the detection technique used. The recoveries were evaluated at three concentration levels by a matrix-matched calibration and were in the ranges of 83-113 % (relative standard deviations (RSD) ≤ 14 %) and 88-109 % (RSD ≤ 11 %) for UV and PA detection, respectively, highlighting very good performances of the method, even for the more polar analytes. Method detection limits ranged from 4 µg/kg (BTZ) to 493 µg/kg (PNT) and from 4 µg/kg (HPPH) to 11 µg/kg (BTZ) for UV and PA detection, respectively. The method was finally compared with a microwave-assisted extraction procedure which provided less satisfactory extraction performances than the optimized QuEChERS procedure.

QuEChERS sample preparation for the determination of pesticides and other organic residues in environmental matrices: a critical review.

Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) is an extraction and clean-up technique originally developed for recovering pesticide residues from fruits and vegetables. Since its introduction, and until December 2013, about 700 papers have been published using the QuEChERS technique, according to a literature overview carried out using SciFinder, Elsevier SciVerse, and Google search engines. Most of these papers were dedicated to pesticide multiresidue analysis in food matrices, and this topic has been thoroughly reviewed over recent years. The QuEChERS approach is now rapidly developing beyond its original field of application to analytes other than pesticides, and matrices other than food, such as biological fluids and non-edible plants, including Chinese medicinal plants. Recently, the QuEChERS concept has spread to environmental applications by analyzing not only pesticides but also other compounds of environmental concern in soil, sediments, and water. To the best of our knowledge, QuEChERS environmental applications have not been reviewed so far; therefore, in this contribution, after a general discussion on the evolution and changes of the original QuEChERS method, a critical survey of the literature regarding environmental applications of conventional and modified QuEChERS methodology is provided. The overall recoveries obtained with QuEChERS and other extraction approaches (e.g., accelerated solvent extraction, ultrasonic solvent extraction, liquid/solid extraction, and soxhlet extraction) were compared, providing evidence for QuEChERS higher recoveries for various classes of compounds, such as biopesticides, chloroalkanes, phenols, and perfluoroalkyl substances. The role of physicochemical properties of soil (i.e., clay and organic carbon content, as well as cation exchange capacity) and target analytes (i.e., log KOW, water solubility, and vapor pressure) were also evaluated in order to interpret recovery and matrix effect data.

First Data on the (Poly)phenolic Profiling of Farmacista Honorati Persimmon Fruit (Diospyros kaki Thunb.) at Commercial Harvest and after Treatments for Astringency Removal.

This study aims to provide the first report on the soluble and polyphenolic profiles of "Farmacista Honorati" (FH) persimmons, which is a marketed cultivar with no existing data on its nutraceutical value. Total soluble tannins (TSTs) and major soluble (poly)phenols in FH fruits before and after post-harvest commercial treatments with carbon dioxide and ethylene were analyzed. Fruits at commercial harvest had a TST content of 1022 ± 286 mg GAL/100 g d.w. Whereas, after deastringency treatments, an 85% and 83% reduction were observed for carbon dioxide- and ethylene-treated fruits, respectively. Carbon dioxide treatment resulted in the insolubilization of tannins around comparable values in most fruit cultivars, despite the variable soluble tannin content in untreated fruit. By targeted metabolomic profiling, nineteen (poly)phenolic substances were quantified in the investigated untreated and treated fruits. Gallic acid (99 mg/100 g d.w.), (+)-catechin (1.8 mg/100 g d.w.), ellagic acid (1.2 mg/100 g d.w.), and (-)-epicatechin (1.1 mg/100 g d.w.) were the predominant compounds in the untreated FH samples. After the application of post-harvest treatments, a non-nutraceutical relevant decrease of 8-19% in the targeted (poly)phenolic content was generally observed. Ethylene induced the most significant reduction in the individual (poly)phenolic compounds in the FH fruits.

Biochar from co-pyrolysis of biological sludge and woody waste followed by chemical and thermal activation: end-of-waste procedure for sludge management and biochar sorption efficiency for anionic and cationic dyes.

Nine biochars were produced by co-pyrolysis of sawdust and biological sludge following the "design of experiment" approach. Two kinds of sludge (both deriving from the treatment of mixed industrial-municipal wastewater) and two types of woody waste were selected as categorical predicting variables, while contact time, pyrolysis temperature, and sludge percentage were used as quantitative variables. Biochars were analysed for their product characteristics and environmental compatibility based on the European Standards (EN 12915-1:2009) for materials intended for water treatment (i.e. ash content, water leachable polycyclic aromatic hydrocarbons (PAHs) and elements), as well as for specific surface area (SSA), using them as response variables of a multivariate partial least square multiple regression, whose results provided interesting insights on the relationships between pyrolysis conditions and biochar characteristics. Biochars produced with sludge and/or providing the highest SSA values (258-370 m2 g-1) were selected to undergo a sustainable chemical treatment using a by-product of the gasification of woody biomass, complying in all cases with European Standards and achieving therefore the end-of-waste status for sewage sludge. The biochar deriving from the highest percentage of sludge (30% by weight) and with the highest SSA (390 m2 g-1) was thermally activated achieving SSA of 460 m2 g-1 and then tested for the sorption of direct yellow 50 and methylene blue in ultrapure water and real wastewater, compared to a commercial activated carbon (AC). The biochar showed Langmuir sorption maxima (Qm) 2-9 times lower than AC, thus highlighting promising sorption performances. Qm for methylene blue in wastewater (28 mg‧g-1) was confirmed by column breakthrough experiments.

Thin-layer chromatography enantioseparations on chiral stationary phases: a review.

The current state of chiral separations by thin-layer chromatography using chiral stationary phases is reviewed. Both stationary phases essentially constituted by the chiral selector and those obtained by the impregnation of achiral plates with appropriate chiral selectors are described. Particular attention is paid to commercial and non-commercial cellulose and cellulose-derivative plates, as well as commercially available Chiralplate™, which are currently the most widely used. Some of the most important results obtained to date are reported and discussed; the examples provided illustrate the very wide range of structurally different solutes that can be readily resolved into their enantiomers by planar chromatographic methods. Special attention is paid to the discussion of the retention and resolution factors that influence chiral discrimination. The quantitative analysis of enantiomers is also discussed, especially from the point of view of determination of enantiomeric purity.

Innovative thermally assisted on-line solid phase extraction-reversed phase liquid chromatography applied to targeted nutrimetabolomics in human biofluids.

In this study, the use of thermal desorption in on-line solid phase extraction coupled with reversed phase liquid chromatography (on-line SPE-LC) was for the first time proposed and demonstrated for the desorption of analytes strongly retained by multiple interaction polymeric sorbents. In detail, this analytical strategy was applied to the on-line SPE-LC targeted analysis of a model set of 34 human gut metabolites characterized by heterogeneous physicochemical properties (i.e., octanol-water partition coefficient in the range -0.3 - 3.4). The novel thermally assisted on-line SPE approach was investigated in comparison to conventional room temperature desorption strategies based on the use of (i) an optimized elution gradient or (ii) organic desorption followed by post-cartridge dilution. The thermally assisted desorption strategy has been shown to be better performing and suitable for the development of a reliable and sensitive method for the analysis of the model group of analytes in urine and serum. In more detail, under the optimized experimental conditions, the proposed method provided negligible matrix effects in both biofluids for almost all target analytes. Moreover, method quantification limits were in the ranges 0.026-7.2 µg L-1 and 0.033-23 µg L-1 for urine and serum, respectively, i.e., comparable to or lower than those reported in methods previously published.

Development of a comprehensive two-dimensional liquid chromatographic mass spectrometric method for the non-targeted identification of poly- and perfluoroalkyl substances in aqueous film-forming foams.

In this research, we developed an online comprehensive two-dimensional liquid chromatographic (LC × LC) method hyphenated with high-resolution mass spectrometry (HRMS) for the non-targeted identification of poly- and perfluorinated compounds (PFASs) in fire-fighting aqueous-film forming foams (AFFFs). The method exploited the combination of mixed-mode weak anion exchange-reversed phase with a octadecyl stationary phase, separating PFASs according to ionic classes and chain length. To develop and optimize the LC × LC method we used a reference training set of twenty-four anionic PFASs, representing the main classes of compounds occurring in AFFFs and covering a wide range of physicochemical properties. In particular, we investigated different modulation approaches to reduce injection band broadening and breakthrough in the second dimension separation. Active solvent and stationary phase assisted modulations were compared, with the best results obtained with the last approach. In the optimal conditions, the predicted peak capacity corrected for undersampling was higher than three-hundred in a separation space of about 60 min. Subsequently, the developed method was applied to the non-targeted analysis of two AFFF samples for the identification of homologous series of PFASs, in which it was possible to identify up to thirty-nine potential compounds of interest utilizing Kendrick mass defect analysis. Even within the samples, the features considered potential PFAS by mass defect analysis elute in the chromatographic regions discriminating for the ionic group and/or the chain length, thus confirming the applicability of the method presented for the analysis of AFFF mixtures and, to a further extent, of environmental matrices affected by the AFFF.

Colorimetric selective quantification of anthocyanins with catechol/pyrogallol moiety in edible plants upon zinc complexation.

Here is examined the colour development from common anthocyanins (i.e., cyanidin, delphinidin, malvidin, and pelargonidin glycosides) and from anthocyanins-rich extracts (i.e., bilberries, strawberries, and raspberries), using zinc-anthocyanin complexes as molecular probe. We have observed the absorbance increase in the blue region in presence of large excess of zinc ion at acidic pH for cyanidin and delphinidin derivatives, likely due to quinoidal base stabilization from catechol and pyrogallol moiety. The assay condition were studied and applied to natural extracts containing these compounds. The same behaviour was observed for bilberry and, to a minor extent, for raspberry extracts, due to the larger cyanidin/delphinidin contents in the former than in the latter. Anthocyanin standard UV-Vis analysis in buffer has shown a very good linear correlation for cyanidin and delphinidin (R2 = 0.995 and 0.997, respectively), good precision (CV% = 7.4% and 5.3% respectively), high sensitivity (Cyε600nm = 8300 M-1 cm-1, LOD = 0.264 ± 0.005 mg L-1, LOQ = 0.478 ± 0.007 mg L-1, and Dpε600nm = 15,900 M-1 cm-1, LOD = 0.143 ± 0.002 mg L-1, LOQ = 0.478 ± 0.007 mg L-1). The effectiveness of this colorimetric method for the selective quantification of catechol/pyrogallol-based anthocyanins has been demonstrated in the aforementioned complex real matrices and compared to LC-MS/MS analysis and pH-differential method, offering a valuable tool to characterize plant and food extracts particularly rich in zinc-coordinating anthocyanins.