Digitally designed and manufactured sectional custom tray for a patient with microstomia: A case report.

Microstomia presents a challenge for the patient and dental provider. This report describes a partial digital workflow for the fabrication of a mandibular complete denture for a patient with microstomia. Computer-aided design and computer-aided manufacturing technology was utilized to 3D print a sectional custom tray with a unique design. The sectional custom tray was used to make a conventional border molded impression of the edentulous arch to fabricate a flexible complete mandibular denture for a 58-year-old female patient with scleroderma and microstomia. This treatment resulted in a successful prosthetic outcome and high patient satisfaction.

Cooling Efficiency of Sleeveless 3D-Printed Surgical Guides with Different Cylinder Designs.

Background and Objectives: Surgical guides might impede the flow of coolant to the implant drills during the preparation of the implant bed, potentially contributing to increased temperatures during bone drilling. The objective of this experimental study was to assess the cooling efficiency of various guiding cylinder designs for sleeveless surgical guides used in guided surgery. Materials and Methods: In this experimental study, surgical guides with three different guiding cylinder designs were printed. One group had solid cylinders (control) and two test groups (cylinders with pores and cylinders with windows). Forty customized polyurethane blocks with type III bone characteristics were fitted into the guide and fixed in a vise, and implant bed preparations were completed using a simplified drilling protocol with and without irrigation. An infrared thermographic camera was used to record the temperature changes during drilling at the coronal, middle, and apical areas. ANOVA test and Games-Howell post hoc test were used to determine significant thermal differences among groups. Results: A significant thermal increase was observed at the coronal area in the group without irrigation (39.69 ± 8.82) (p < 0.05). The lowest thermal increase was recorded at the surgical guides with windows (21.451 ± 0.703 °C) compared to solid (25.005 ± 0.586 °C) and porous surgical guides (25.630 ± 1.004) (p < 0.05). In the middle and apical areas, there were no differences between solid and porous cylinders (p > 0.05). Conclusions: 3D-printed sleeveless surgical guides with window openings at the guiding cylinders reduce the temperature elevation at the cortical bone in guided implant surgery.

Assisted removal of metal housings from overdentures with a 445-nm diode laser: A dental technique.

A straightforward, laser-assisted method of extracting the metal housings from an overdenture by using the visible (blue) light of a high-power dental diode laser is presented. This approach produced localized softening of the acrylic resin, allowing the metal housing to be dislodged without damage. This technique minimizes damage to the metal housings during removal, is rapid and conservative, and may help reduce patient costs.

Accuracy of torque controllers on healing abutments in implant dentistry-an in vitro study.

PURPOSE: To evaluate the accuracy of three torque-control devices used on healing abutments in implant prosthodontics. MATERIALS AND METHODS: In this in vitro experiment, three torque controllers, Ankylos friction-based, Straumann spring-based, and Anthogyr pre-calibrated torque control devices were used to tighten the healing abutments of Ankylos and Straumann dental implants to a pre-determined value of 15 Ncm. A digital torque meter (DT), Cedar DID-4A, was used to assess removal torque as a surrogate for the accuracy of the torque controllers to apply a tightening force of 15 Ncm on healing abutments.  One-way analysis of variance (ANOVA) was used to identify differences between each torque controller and the digital torquemeter, a p < 0.05 was considered significant. RESULTS: The torque required to remove the healing abutments was 16.05 ± 0.66 Ncm for the Ankylos ratchet, 12.61 ± 0.90 Ncm for the Straumann ratchet, and 14.37 ± 1.08 Ncm for the Anthogyr torque-control device. Significant statistical differences were observed between Ankylos and the control digital torquemeter (p = 1.84E-8 ; F = 50.3); Anthogyr and control digital torquemeter (p = 0.01; F = 6.79); and Straumann and control digital torquemeter (p = 0.01; F = 141.15). CONCLUSION: Friction-based (Ankylos), spring-based (Straumann), and pre-calibrated (Anthogyr) torque control devices present over-torque and under-torque values when used over healing abutments of Ankylos and Straumann implant systems.

Implant and prosthetic rehabilitation of a patient with mucous membrane pemphigoid.

Mucous membrane pemphigoid (MMP) is an autoimmune condition characterized by subepithelial separation and deposition of autoantibodies and complement along the basement membrane zone. The disease results in the development of vesiculobullous lesions of the mucous membranes and skin. This report discusses the surgical treatment and management and the prosthetic implant rehabilitation of a patient with mucous membrane pemphigoid. The rationale for this treatment was to fabricate a prosthesis that was stable and did not rub against the gingival tissues and that was easily cleaned. The overdenture attachment system used provides more stability than other attachment systems while allowing the prosthesis and abutments to be easily cleaned.

Titanium Wear of Dental Implants from Placement, under Loading and Maintenance Protocols.

The objective of this review was to analyze the process of wear of implants leading to the shedding of titanium particles into the peri-implant hard and soft tissues. Titanium is considered highly biocompatible with low corrosion and toxicity, but recent studies indicate that this understanding may be misleading as the properties of the material change drastically when titanium nanoparticles (NPs) are shed from implant surfaces. These NPs are immunogenic and are associated with a macrophage-mediated inflammatory response by the host. The literature discussed in this review indicates that titanium NPs may be shed from implant surfaces at the time of implant placement, under loading conditions, and during implant maintenance procedures. We also discuss the significance of the micro-gap at the implant-abutment interface and the effect of size of the titanium particles on their toxicology. These findings are significant as the titanium particles can have adverse effects on local soft and hard tissues surrounding implants, implant health and prognosis, and even the health of systemic tissues and organs.

Counterclockwise Drilling with Different Tapered Drills Condenses the Implant Bed-An Optical Coherence Tomography In Vitro Study.

Background and Objectives: To evaluate the condensation and the microarchitecture of implant bed walls of sites prepared with counterclockwise drilling with tapered implant drills using optical coherence tomography. Materials and Methods: Four drill designs with different wall and tip angles were used. Polyurethane laminas resembling type IV bone microarchitecture were superimposed and clamped with a vice to simulate the coronal, middle, and apical aspects of the implant site. Twenty implant beds were prepared at 1200 rpm in clockwise (control) and counterclockwise (test) directions (N = 160). Optical coherence tomography (OCT) was used to evaluate the condensation and microarchitecture characteristics of the implant bed walls. The relative condensation was calculated using the Image J software Bone application. The microarchitecture was evaluated in reconstructed 3D volumes in XY, XZ, and YZ sections. Statistical analysis was performed using one-way ANOVA. Dunnet test was applied to determine differences between groups. Significance was set as p < 0.05. Results: Counterclockwise drilling (Test) condensed and changed the microarchitecture of the apical regions for all the implant beds in all of the groups when compared to clockwise drilling (control). The apical region of test groups showed the highest relative bone condensation (p = 0.026) when compared to controls. Conclusions: The direction of rotation (counterclockwise drilling) and not the design of tapered drills (tip and wall angles) is responsible for the condensation at the apical area observed in polyurethane blocks. The OCT method can be used for the evaluation of changes in density and microstructure of polyurethane blocks.

Concepts for prevention of complications in implant therapy.

The use of dental implants is nowadays a well-accepted and highly predictable treatment modality for restoring the dentition and reestablishing the masticatory function of edentulous and partially edentulous patients. Despite the high predictability and excellent long-term survival rates reported for implant therapy, complications may still occur and can jeopardize both short- and long-term success. The present paper provides an overview on the most important aspects related to the etiology, prevention, and management of complications associated with implant therapy. Data from the literature indicate that a number of factors, such as surgical trauma, implant diameter, type of implant-abutment connection, abutment disconnection and reconnection, presence of microgap, and implant malpositioning, can substantially influence the biologic processes of bone remodeling and biofilm formation, thus increasing the rate of short- and long-term hard- and soft-tissue complications. Other factors, such as excess cement at cement-retained prosthetic restorations, abutment mobility, and infections (e.g. peri-implant mucositis and peri-implantitis) caused by bacterial biofilm, are further causes for complications and failures. More recent evidence also indicates that besides the need for sufficient bone volume surrounding the implant, the presence of an adequate width and thickness of attached mucosa may improve biofilm control and limit crestal bone resorption. Furthermore, emerging evidence points also to the pivotal role of human factors as one of the most important causes of complications in implant dentistry. It can be concluded that clinicians need to consider all biologic and biomechanical factors affecting implant placement and survival, as well as undergo adequate training to improve their surgical skills to control and prevent implant complications. Careful patient selection and control of environmental and systemic factors, such as smoking, diabetes etc., coupled with an accurate surgical and prosthetic planning, enable a better prevention and control of infections.

Effects of occlusal forces on the peri-implant-bone interface stability.

The occlusal forces and their influence on the initiation of peri-implant bone loss or their relationship with peri-implantitis have created discussion during the past 30 years given the discrepancies observed in clinical, animal, and finite element analysis studies. Beyond these contradictions, in the case of an osseointegrated implant, the occlusal forces can influence the implant-bone interface and the cells responsible for the bone remodeling in different ways that may result in the maintenance or loss of the osseointegration. This comprehensive review focuses on the information available about the forces transmitted through the implant-crown system to the implant-bone interface and the mechano-transduction phenomena responsible for the bone cells' behavior and their interactions. Knowledge of the basic molecular biology of the peri-implant bone would help clinicians to understand the complex phenomenon of occlusal forces and their effects on the implant-bone interface, and would allow better control of the negative effects of mechanical stresses, leading to therapy with fewer risks and complications.

Correction to: Influence of surface treatment on osseointegration of dental implants: histological, histomorphometric and radiological analysis in vivo.

Dear Professor Dr. Matthias Hannig. Editor-in-Chief Clinical Oral Investigations. Following the publication of our paper by Calvo Guirado et al, 2015 [1] in Clinical Oral Investigations, it came to light that a certain part of the text at the materials and methods and results sections were similar.

Bone grafting materials in critical defects in rabbit calvariae. A systematic review and quality evaluation using ARRIVE guidelines.

AIMS: To perform a systematic literature review of the regenerative potential of bone substitutes used to fill critical size defects (CSDs) in rabbit calvariae; to determine the quality of the included studies using ARRIVE guidelines. MATERIAL AND METHODS: An Internet search was performed in duplicate using MEDLINE, PubMed and Google Scholar databases (without restrictions on publication date) for studies reporting the regenerative potential of bone substitutes in CSDs in rabbit calvariae. Four parameters were analyzed by histomorphometry: new bone formation (NB); defect closure (DC); residual graft (RG); and connective tissue (CT). Animal Research Reporting in In Vivo Experiments (ARRIVE) guidelines (a list of 20 aspects for scoring texts and ensuring comparison between different experimental studies in animals) were used to evaluate the quality of the selected works. RESULTS: Twenty-one manuscripts were included. CSDs with 15 mm were predominant (57.14%). Only one study described the four histomorphometric parameters. NB formation was analyzed in 15 studies (71.42%) and was higher for particulate autogenous bone grafts (range 52.1-82%) after 12 weeks. DC was evaluated in six studies (28.57%) and was higher for fragmented adipose tissue grafts (range 53.33-93.33%) after 12 weeks. RG was evaluated in four studies (19.04%) and was higher for hydroxyapatite/beta-tricalcium phosphate grafts with silica (HA/ß-TCP + Si) (range 35.78-47.54%) at 12 weeks. CT was evaluated in two studies (9.5%) and was higher for HA/ß-TCP + membrane (44.2%) at 12 weeks. Quality evaluation identified three items (title, introduction/objectives and experimental procedure) (15%) with excellent scores, 10 items (abstract, introduction/background, methods/ethical statement, experimental animals, experimental outcomes, statistics, results/baseline data, outcome/estimation and discussion interpretation/scientific implications) (50%) with average scores, and seven items (housing and husbandry, sample size, allocation, numbers analyzed, adverse effects, general applicability/relevance and funding) (35%) obtained poor scores. Only one manuscript obtained a quality evaluation considered as excellent. CONCLUSIONS: Autogenous bone grafts increase NB. DC is enhanced by the use of fragmented adipose tissue. RG remains in the defect for longer when hydroxyapatite/beta-tricalcium phosphate with silica is used, and more CT can be expected when hydroxyapatite/beta-tricalcium phosphate with silica grafts are covered by a membrane. The addition of stem cells of different origins to grafting materials enhances bone formation in early healing periods. The ARRIVE guidelines are still insufficiently used and the overall quality of studies remains low.

Influence of the implant diameter and bone quality on the primary stability of porous tantalum trabecular metal dental implants: an in vitro biomechanical study.

OBJECTIVES: The aim of this study was to evaluate the primary, initial stability of Porous Tantalum Trabecular Metal™ implants (TM) compared with Tapered Screw Vent® implants (TSV) with different diameters, inserted in two bone densities. METHODS: A total of 160 implants (80 TM and 80 TSV) with narrow (3.7 mm) and conventional (4.1 mm) diameters and the same length (10 mm) were placed in artificial bone blocks representing bone qualities II and IV. The implant stability was evaluated by insertion torque (IT) and Resonance Frequency Analysis. Statistical analysis was performed with non-parametric Kruskal-Wallis test with Dunn post-test for the differences between groups. RESULTS: The results showed higher ISQ values in dense bone compared with soft bone for all the groups (P < 0.05). Conventional-diameter implants (TSV and TM) showed higher ISQ and IT values compared with narrow implants (TSV and TM) in dense and soft bone (P < 0.05). Tapered TSV implants showed higher stability in soft bone compared with TM implants (P < 0.05). In dense bone, differences were not observed between narrow TSV 3.7 mm and TM 3.7 mm implants (P > 0.05). CONCLUSIONS: Within the limitations of this study, it can be concluded: In dense bone blocks, the wider diameter implants are more stable than narrow implants. In soft bone blocks, the tapered TSV implants are more stable than TM implants.

Dental implant surgery in patients in treatment by dabigatran.

OBJECTIVES: The aim of this study was to evaluate the incidence of bleeding complications after dental implant placement in patients in treatment by the oral anticoagulant dabigatran following a specific protocol. MATERIAL AND METHODS: Seventy-one patients were divided into two groups: 29 had been taking dabigatran for over 6 months (150 mg orally every 12 h) before implant surgery (dabigatran group) and a control group consisting of 42 healthy subjects. Patients were treated in an outpatient setting. All subjects received dental implants in different positions, dabigatran group patients 12 h after the last dose of dabigatran. Nonabsorbable sutures were used and patients were given gauzes impregnated with tranexamic acid 5% to bite on for 30-60 min. Dabigatran patients resumed medication 8 h after the procedure, resuming usual dosage (every 12 h) the day after surgery. RESULTS: Two dabigatran patients and two control patients presented slight bleeding the day after surgery. Bleeding was managed with gauzes impregnated with tranexamic acid. No statistically significant differences (P = 0.542) were found in relation to bleeding episodes between the groups, with a relative risk of 0.675 based on the pooled groups and a 95% confidence interval of 0.090-5.088. CONCLUSIONS: Dental implant surgery in patients taking dabigatran can be performed safely providing 12 h have passed since the last dose and local hemostatic measures are applied. Normal dosage can be resumed 8 h after implant surgery.

Biological effects of compressive forces exerted on particulate bone grafts during socket preservation: animal study.

OBJECTIVES: To compare different compressive forces exerted on a particulate graft material during socket preservation and their effects on bone regeneration. MATERIAL AND METHODS: Six male dogs were used. The second, third, and fourth premolars, and the first molar were extracted bilaterally at the lower jaws. A particulate synthetic biphasic grafting material (60% HA and 40% ß-tricalcium phosphate) was used. Three different standardized compressive forces were applied randomly during the socket preservation. The sample was divided into four experimental groups Test A (10 g), Test B (50 g), Test C (200 g), and Control (empty sockets). Collagen membranes were placed, and primary closure was obtained. Two months after the surgery the animals were sacrificed, and histomorphometric analysis of non-decalcified samples was performed at the coronal, middle, and apical thirds. RESULTS: Grafted sockets resulted in higher bony contour (3 ± 0.43 mm2 ; P < 0.05). The particles penetrated up to the apical third in the group C but not in the other test groups and controls (P < 0.05). The percentage of new bone were higher at the coronal and apical thirds for Controls and group C compared to A and B groups (P < 0.05). The residual graft was higher for group C (53 ± 1.4%), followed by group B (45 ± 3.1%) and group A (35 ± 1.9%; P < 0.05). The percentages of connective tissue were higher at the middle third without differences between groups (P > 0.05). CONCLUSIONS: Within the limitations of this experimental animal study, it might be concluded that grafted sockets compressed with 200 g force will have higher bony contours; higher compressive forces facilitate the penetration of the particulate graft material into the apical area of the socket and results in more bone formation at the coronal, middle, and apical thirds.

Retracted: A new cervical implant design compared with standard design in order to increase peri-implant hard and soft tissue behavior: histomorphometric and histological study in dogs.

OBJECTIVE: The aim of this study was to evaluate a new design of the cervical portion of dental implant with the objective to increase the volume of peri-implant tissues in the crestal area. MATERIALS AND METHODS: Forty-eight tapered dental titanium implants with internal conical connection were implanted in healed alveolar sites of six dogs. Twenty-four conventional implants design (C1 implant) formed the control group, and 24 new implant design (V3 implant) formed the test group. The groups were randomized. Histological, histomorphometric, and implant stability quotient were performed. After 12 weeks of healing period, histomorphometric analyses of the specimens were carried out to measure the crestal bone level values and the tissue thickness in the cervical implant portion. The data were compared using statistical tests (α = 5%). RESULTS: The mean of the measurements in the buccal and lingual aspects measured of crestal bone level was 0.31 ± 0.24 mm and 0.30 ± 0.19 mm in the control group, respectively, and 0.71 ± 0.28 and 0.42 ± 0.30 mm in the test group, respectively, whereas the mean of the tissue thickness was 1.63 ± 0.33 mm and 2.04 ± 0.23 mm in the control group, respectively, and 2.11 ± 0.35 mm and 2.51 ± 0.41 mm in the test group. CONCLUSIONS: Within the limitations of this study, our findings suggest that more thickness of peri-implant hard and soft tissues may be expected in this new implant design. However, the control group with traditional implant design was found to have more height values of the crestal bone compared with new V3 implants.

Role of mechanical compression on bone regeneration around a particulate bone graft material: an experimental study in rabbit calvaria.

PURPOSE: This experimental study was designed to analyze the effect of different compressive forces on the bone regeneration around a particulate bone graft material. MATERIAL AND METHODS: Eighty 6-mm-diameter defects were created in the calvaria of 20 New Zealand rabbits (4 defects per rabbit calvaria). All the defects were filled with particles of synthetic bone. Two standardized compressive forces were then applied, 4.1 g to half the defects (Test A) and 8.2 g to the other half (Test B), all for 1 min. The graft sites were allowed to heal for 6 weeks, after which the rabbits were euthanized. The calvarium vault of each animal was extracted, radiographed, and prepared for histomorphometric analysis. The percentage of defect fill, bone density, new bone formation, and residual bone graft material were recorded, and the results were subjected to statistical analysis. RESULTS: Histological evaluation found that defect closure among the Test A (lower compression) group ranged from 38.34 (95% lower CI) to 55.8 (95% upper CI) (mean 47 ± 8.5%), while among the Test B group (higher compression), it ranged from 81.26 (95% lower CI) to 95.32 (mean 88 ± 7.3%). Significantly more closure was achieved for the Test B group (P < 0.05). Histomorphometric comparison of the two groups found significantly more new bone formation, higher bone density, and a higher percentage of defect fill in the defects subjected to the higher compression level (P < 0.05). CONCLUSIONS: Increasing the compressive force applied to bone graft particulate used to fill small defects created in rabbit calvaria appears to be beneficial.

Potential Causes of Titanium Particle and Ion Release in Implant Dentistry: A Systematic Review.

Implant surface characteristics, as well as physical and mechanical properties, are responsible for the positive interaction between the dental implant, the bone and the surrounding soft tissues. Unfortunately, the dental implant surface does not remain unaltered and changes over time during the life of the implant. If changes occur at the implant surface, mucositis and peri-implantitis processes could be initiated; implant osseointegration might be disrupted and bone resorption phenomena (osteolysis) may lead to implant loss. This systematic review compiled the information related to the potential sources of titanium particle and ions in implant dentistry. Research questions were structured in the Population, Intervention, Comparison, Outcome (PICO) framework. PICO questionnaires were developed and an exhaustive search was performed for all the relevant studies published between 1980 and 2018 involving titanium particles and ions related to implant dentistry procedures. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed for the selection and inclusion of the manuscripts in this review. Titanium particle and ions are released during the implant bed preparation, during the implant insertion and during the implant decontamination. In addition, the implant surfaces and restorations are exposed to the saliva, bacteria and chemicals that can potentially dissolve the titanium oxide layer and, therefore, corrosion cycles can be initiated. Mechanical factors, the micro-gap and fluorides can also influence the proportion of metal particles and ions released from implants and restorations.