RESUMO
We employed a polymeric material, poly(methyl methacrylate) (PMMA), for fabricating a microdevice and then implanted the chlorine (Cl)-containing solid-phase extraction (SPE) functionality into the PMMA chip to develop an innovative on-chip dipole-assisted SPE technique. Instead of the ion-ion interactions utilized in on-chip SPE techniques, the dipole-ion interactions between the highly electronegative C-Cl moieties in the channel interior and the positively charged metal ions were employed to facilitate the on-chip SPE procedures. Furthermore, to avoid labor-intensive manual manipulation, a programmable valve manifold was designed as an interface combining the dipole-assisted SPE microchip and inductively coupled plasma-mass spectrometry (ICP-MS) to achieve the fully automated operation. Under the optimized operation conditions for the established system, the detection limits for each analyte ion were obtained based on three times the standard deviation of seven measurements of the blank eluent solution. The limits ranged from 3.48 to 20.68 ng L(-1), suggesting that this technique appears uniquely suited for determining the levels of heavy metal ions in natural water. Indeed, a series of validation procedures demonstrated that the developed method could be satisfactorily applied to the determination of trace heavy metals in natural water. Remarkably, the developed device was durable enough to be reused more than 160 times without any loss in its analytical performance. To the best of our knowledge, this is the first study reporting on the combination of a dipole-assisted SPE microchip and elemental analysis instrument for the online determination of trace heavy metal ions.
Assuntos
Metais Pesados/análise , Procedimentos Analíticos em Microchip/métodos , Poluentes Químicos da Água/análise , Água/análise , Dispositivos Lab-On-A-Chip , Limite de Detecção , Espectrometria de Massas/métodos , Polimetil Metacrilato , Extração em Fase Sólida/métodos , Poluição Química da Água/análiseRESUMO
With an ordered polystyrene (PS) template-assisted electrochemical approach we synthesized three-dimensional ordered macroporous (3DOM) Cu2O/Ni inverse opals as electrodes for supercapacitors. The 3DOM Cu2O/Ni electrodes display superior kinetic performance, and satisfactory rate capability and cycling performance.
RESUMO
Flexible electrochemical supercapacitors (FESCs) are emerging as innovative energy storage systems, characterized by their stable performance, long cycle life, and portability/foldability. Crucial components of FESCs, such as electrodes and efficient electrolytes, have become the focus of extensive research. Herein, we examine deep eutectic solvent (DES)-based polymer gel systems for their cost-effective accessibility, simple synthesis, excellent biocompatibility, and exceptional thermal and electrochemical stability. We used a mixture a DES, LiClO4-2-Oxazolidinone as the electroactive species, and a polymer, either polyvinyl alcohol (PVA) or polyacrylamide (PAAM) as a redox additive/plasticizer. This combination facilitates a unique ion-transport process, enhancing the overall electrochemical performance of the polymer gel electrolyte. We manufactured and used LiClO4-2-Oxazolidinone (LO), polyvinyl alcohol-LiClO4-2-Oxazolidinone (PVA-LO), and polyacrylamide-LiClO4-2-Oxazolidinone (PAAM-LO) electrolytes to synthesize an MnO2 symmetric FESC. To evaluate their performance, we analyzed the MnO2 symmetric FESC using various electrolytes with cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The FESC featuring the PVA-LO electrolyte demonstrated superior electrochemical and mechanical performances. This solid-state MnO2 symmetric FESC exhibited a specific capacitance of 121.6 F/g within a potential window of 2.4 V. Due to the excellent ionic conductivity and the wide electrochemical operating voltage range of the PVA-LO electrolyte, a high energy density of 97.3 Wh/kg at 1200 W/kg, and a long-lasting energy storage system (89.7% capacitance retention after 5000 cycles of GCD at 2 A/g) are feasibly achieved. For practical applications, we employed the MnO2 symmetric FESCs with the PVA-LO electrolyte to power a digital watch and a light-emitting diode, further demonstrating their real-world utility.
RESUMO
Herein, the nanostructured polypyrrole-coated MnO2 nanofibers growth on carbon cloth (PPy-MnO2-CC) to serve as the electrodes used in conjunction with a quasi-ionic liquid-based polymer gel electrolyte (urea-LiClO4-PVA) for solid-state symmetric supercapacitors (SSCs). The resultant PPy-MnO2-CC solid-state SSCs exhibited a high specific capacitance of 270 F/g at 1.0 A/g in a stable and wide potential window of 2.1 V with a high energy/power density (165.3 Wh/kg at 1.0 kW/kg and 21.0 kW/kg at 86.4 Wh/kg) along with great cycling stability (capacitance retention of 92.1% retention after 3000 cycles) and rate capability (141 F/g at 20 A/g), exceeding most of the previously reported SSCs. The outstanding performance of the studied 2.1 V PPy-MnO2-CC flexible SSCs could be attributed to the nanostructured PPy-coated MnO2 composite electrode and the urea-LiClO4-PVA polymer gel electrolyte design. In addition, the PPy-MnO2-CC solid-state SSCs could effectively retain their electrochemical performance at various bending angles, demonstrating their huge potential as power sources for flexible and lightweight electronic devices. This work offers an easy way to design and achieve light weight and high-performance SSCs with enhanced energy/power density.
RESUMO
The specific energy of an aqueous carbon supercapacitor is generally small, resulting mainly from a narrow potential window of aqueous electrolytes. Here, we introduced agarose, an ecologically compatible polymer, as a novel binder to fabricate an activated carbon supercapacitor, enabling a wider potential window attributed to a high overpotential of the hydrogen-evolution reaction (HER) of agarose-bound activated carbons in sulfuric acid. Assembled symmetric aqueous cells can be galvanostatically cycled up to 1.8 V, attaining an enhanced energy density of 13.5 W h/kg (9.5 µW h/cm2) at 450 W/kg (315 µW/cm2). Furthermore, a great cycling behavior was obtained, with a 94.2% retention of capacitance after 10,000 cycles at 2 A/g. This work might guide the design of an alternative material for high-energy aqueous supercapacitors.
RESUMO
Apigenin (Apig) is used as a model drug due to its many beneficial bio-activities and therapeutic potentials. Nevertheless, its poor water solubility and low storage stability have limited its application feasibility on the pharmaceutical field. To address this issue, this study developed nanoemulsions (NEs) using an anti-oxidative polymeric amphiphile, d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), hydrogenated soy lecithin (HL), black soldier fly larvae (BSFL) oil, and avocado (AV) oil through pre-homogenization and ultrasonication method. Addition of TPGS (weight ratios 100 and 50% as compared to HL) into NEs effectively reduced particle size and phase transition region area of NEs with pure HL. Incorporation of Apig into NEs made particle size increase and provided a disorder effect on intraparticle molecular packing. Nevertheless, the encapsulation efficiency of NEs for Apig approached to about 99%. The chemical stability of Apig was significantly improved and its antioxidant ability was elevated by incorporation with BSFL oil and AV oil NEs, especially for NEs with single TPGS. NEs with single TPGS also exhibited the best Apig skin deposition. For future application of topical Apig delivery, NEs-gel was formed by the addition of hyaluronic acid (HA) into NEs. Their rheological characteristics were dominated by the surfactant ratios of HL to TPGS.
RESUMO
A nano-structured Co oxide electrode (with a Ni substrate) was successfully prepared using an entirely electrochemical process, which included the co-deposition of a Ni-Cu alloy film, selective etching of Cu from the film, and anodic deposition of Co oxide on the obtained nano-porous Ni substrate which had an average pore size of approximately 100 nm and a pore density of about 10(13) m(-2). The excellent electrochemical activity of the prepared electrode was demonstrated in terms of its pseudocapacitive performance, which was evaluated using cyclic voltammetry (CV) in 1 M KOH solution. The specific capacitance of the nano-structured Co oxide measured at a potential scan rate of 10 mV s(-1) was as high as 2200 F g(-1), which is over ten times higher than that of a flat oxide electrode (209 F g(-1)). The highly porous Co oxide also had superior kinetic performance as compared to a flat electrode. At a high CV scan rate of 50 mV s(-1), the two electrodes retained 94% and 59%, respectively, of their specific capacitances measured at 5 mV s(-1).
RESUMO
A 3D network composed of V2O5 nanofibers was manufactured on a novel conductive printing paper [urea-LiClO4-PVA (ULP) deep eutectic solvent gel-doped graphite/printing paper, U-paper] for use as electrodes linked with a ULP neutral gel electrolyte for 3D network V2O5 wearable symmetric pseudocapacitors (WSSCs). The function of the ULP gel is not only that it can be doped into the conductive ink to decrease the resistance of the conductive printing paper but also that it increases the stability of V2O5-based electrodes. Moreover, 3D network V2O5 WSSCs containing the ULP gel can support high operating voltages of 4.0 V with great specific capacitance (160 F/g) and offer a high energy density (355 W h/kg at 0.2 kW/kg). The 3D network V2O5 WSSCs exhibit a superior cycling stability/durability after 5000 cycles (capacitance retention of â¼91%). Operando X-ray absorption spectroscopy experiments show the reversibility and pseudocapacitive properties of V2O5 from the ULP gel and offer the information of the oxidation states of vanadium during charge-discharge cycles. The 3D network V2O5 WSSCs with the ULP gel electrolyte show great potential prospective candidates for smarter 3D wearable energy-storage devices and Internet-of-Things applications.
RESUMO
Here we report a simple, scalable, and low-cost method to enhance the electrochemical properties of Mn oxide electrodes for highly efficient and flexible symmetrical supercapacitors. The method involving printing on a printer, pencil-drawing, and electrodeposition is established to fabricate Mn oxide/Ni-nanotube/graphite/paper hybrid electrodes operating with a low-cost, novel urea-LiClO4/PVA as gel electrolyte for flexible solid-state supercapacitor (FSSC) devices. The Mn oxide nanofiber/Ni-nanotube/graphite/paper (MNNGP) electrodes in urea-LiClO4/PVA gel electrolyte show specific capacitance (Csp) 960 F/g in voltage region 0.8 V at 5 mV/s and exhibit excellent rates of capacitance retention more than 85% after 5000 cycles. Moreover, the electrochemical behavior of the MNNGP electrodes in urea-LiClO4/PVA at operating temperatures 27-110 °C was investigated; the results show that the MNNGP electrodes in urea-LiClO4/PVA exhibit outstanding performance (1100 F/g), even at 90 °C. The assembled FSSC devices based on the MNNGP electrodes in urea-LiClO4/PVA exhibit great Csp (380 F/g in potential region of 2.0 V at 5 mV/s, exhibiting superior energy density 211.1 W h/kg) and great cycle stability (less than 15% loss after 5000 cycles at 25 mV/s). The oxidation-state change was examined by in situ X-ray absorption spectroscopy. FSSC devices would open new opportunities in developing novel portable, wearable, and roll-up electric devices owing to the cheap, high-performance, wide range of operating temperature, and simple procedures for large-area fabrication.
RESUMO
This paper describes a fabrication protocol for a dipole-assisted solid phase extraction (SPE) microchip available for trace metal analysis in water samples. A brief overview of the evolution of chip-based SPE techniques is provided. This is followed by an introduction to specific polymeric materials and their role in SPE. To develop an innovative dipole-assisted SPE technique, a chlorine (Cl)-containing SPE functionality was implanted into a poly(methyl methacrylate) (PMMA) microchip. Herein, diverse analytical techniques including contact angle analysis, Raman spectroscopic analysis, and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analysis were employed to validate the utility of the implantation protocol of the C-Cl moieties on the PMMA. The analytical results of the X-ray absorption near-edge structure (XANES) analysis also demonstrated the feasibility of the Cl-containing PMMA used as an extraction medium by virtue of the dipole-ion interactions between the highly electronegative C-Cl moieties and the positively charged metal ions.
Assuntos
Espectrometria de Massas/métodos , Metais/análise , Polímeros/análise , Extração em Fase Sólida/métodos , Oligoelementos/análiseRESUMO
Large-area Co(OH)2-based supercapacitor electrodes composed of nanotube arrays grown on a 3D nickel-foam (CONTA) electrode and sucker-like nanoporous films grown on a 3D nickel-foam (COSNP) electrode were prepared with a facile electrochemical method for applications in energy storage. These nanoporous Co(OH)2 electrodes were fabricated with the codeposition of Cu/Ni film on the nickel foam, then etching of Cu from the Cu/Ni layer to form Ni nanotube arrays and sucker-like Ni nanoporous layers, and further cathodic deposition of Co(OH)2 on the prepared nanoporous Ni substrates. The CONTA and COSNP electrodes exhibited specific capacitances of 2500 and 2900 F/g in a voltage range of 0.65 V (capacitance of the substrates deducted from the total) at 1 A/g in a three electrode cell, respectively. The COSNP electrode demonstrated an excellent supercapacitive performance with specific capacitances 1100 F/g at 1 A/g and 850 F/g at 20 A/g in a voltage range of 1.2 V in a two electrode cell. The remarkable performance of COSNP electrodes correlated with a large conversion of the Co oxidation state during the charge/discharge cycling were examined by in situ X-ray absorption near edge structure (XANES).
RESUMO
The electrochemical behavior of anodically deposited manganese oxide was studied in pyrrolidinium formate (P-HCOO), 1-butyl-3-methylimidazolium hexafluorophosphate (BMI-PF6), and 1-ethyl-3-methylimidazolium thiocyanate (EMI-SCN) ionic liquids (ILs). The experimental data indicate that the Mn oxide electrode showed ideal pseudocapacitive performance in aprotic EMI-SCN IL. In a potential window of approximately 1.5 V, the oxide specific capacitance, evaluated using cyclic voltammetry and chronopotentiometry, was about 55 F/g. The electrochemical energy storage reaction was examined using X-ray photoelectron spectroscopy (XPS). It was confirmed that the SCN- anions, instead of the EMI+ cations, were the primary working species that can become incorporated into the oxide and thus compensate the Mn3+/Mn4+ valent state variation upon the charge-discharge process. According to the analytical results, a pseudocapacitive mechanism of Mn oxide in the SCN- based aprotic IL was proposed.