RESUMO
Alkylation of one of the phenolic hydroxyl groups in a salen-type tetradentate ligand changes the coordination mode from O^N^N^O to the cyclometallating C^N^N^O type. The ligand was used to synthesize a new cyclometalated luminescent Pt(II) complex 2. While in solution the complex is poorly luminescent, in the solid state the emission is reinstated, which allowed one to evaluate complex 2 as a phosphorescent emitter in organic light-emitting diodes. 2 displays external quantum efficiency (EQE) = 9.1% and a maximum luminance of 9000 cd m-2 in a vacuum-deposited device. We carried out comparative analysis of photo- and electroluminescence of complex 2 with O^N^N^O complex 1 and demonstrated that the similar luminescent properties of the O^N^N^O and C^N^N^O complexes are rather coincidental because they display different excited-state landscapes. Surprisingly, the two complexes display a dramatically different electrochemical behavior, with O^N^N^O coordination leading to the formation of a stable electropolymer but C^N^N^O coordination fully preventing electropolymerization.
RESUMO
In this work, we introduce a spiro-fluorene unit into a phenylpyridine (CN)-type ligand as a simple way to deplanarize the structure and increase the solubility of the final platinum(II)···complex. Using a spiro-fluorene unit, orthogonal to the main coordination plane of the complex, reduces intermolecular interactions, leading to increased solubility but without significantly affecting the ability of the complex to form Pt···Pt dimers and excimers. This approach is highly important in the design of platinum(II) complexes, which often suffer from low solubility due to their mainly planar structure, and offers an alternative to the use of bulky alkyl groups. The nonplanar structure is also beneficial for vacuum-deposition techniques as it lowers the sublimation temperature. Importantly, there are no sp3 hybridized carbon atoms in the cyclometalating ligand that contain hydrogens, the undesired feature that is associated with the low stability of the materials in OLEDs. The complex displays high solubility in toluene, â¼10 mg mL-1, at room temperature, which allows producing solution-processed OLEDs in a wide range of doping concentrations, 5-100%, and EQE up to 5.9%, with a maximum luminance of 7400 cd m-2. Concurrently, we have also produced vacuum-deposited OLEDs, which display luminance up to 32â¯500 cd m-2 and a maximum EQE of 11.8%.
RESUMO
Rapid and accurate detection of lethal volatile compounds is an emerging requirement to ensure the security of the current and future society. Since the threats are becoming more complex, the assurance of future sensing devices' performance can be obtained solely based on a thorough fundamental approach, by utilizing physics and chemistry together. In this work, we have applied thermal desorption spectroscopy (TDS) to study dimethyl methylophosphate (DMMP, sarin analogue) adsorption on zinc phthalocyanine (ZnPc), aiming to achieve the quantification of the sensing mechanism. Furthermore, we utilize a novel approach to TDS that involves quantum chemistry calculations for the determination of desorption activation energies. As a result, we have provided a comprehensive description of DMMP desorption processes from ZnPc, which is the basis for successful future applications of sarin ZnPc-based sensors. Finally, we have verified the sensing capability of the studied material at room temperature using impedance spectroscopy and took the final steps towards demonstrating ZnPc as a promising sarin sensor candidate.
Assuntos
Substâncias para a Guerra Química , Compostos Organometálicos , Substâncias para a Guerra Química/análise , Sarina , Compostos Organometálicos/química , Compostos de ZincoRESUMO
The mechanism of thermally activated delayed fluorescence (TADF) in dendrimers is not clear. We report that fully-conjugated or fully-nonconjugated structures cause unwanted degenerate excited states due to multiple identical dendrons, which limit their TADF efficiency. We have synthesized asymmetrical "half-dendronized" and "half-dendronized-half-encapsulated" emitters. By eliminating degenerate excited states, the triplet locally excited state is ≥0.3â eV above the lowest triplet charge-transfer state, assuring a solely thermal equilibrium route for an effective spin-flip process. The isolated encapsulating tricarbazole unit can protect the TADF unit, reducing nonradiative decay and enhancing TADF performance. Non-doped solution-processed devices reach a high external quantum efficiency (EQEmax ) of 24.0 % (65.9â cd A-1 , 59.2â lm W-1 ) with CIE coordinates of (0.24, 0.45) with a low efficiency roll-off and EQEs of 23.6 % and 21.3 % at 100 and 500â cd m-2 .
RESUMO
The synthetic methodology to covalently link donors to form cyclophane-based thermally activated delayed fluorescence (TADF) molecules is presented. These are the first reported examples of TADF cyclophanes with "electronically innocent" bridges between the donor units. Using a phenothiazine-dibenzothiophene-S,S-dioxide donor-acceptor-donor (D-A-D) system, the two phenothiazine (PTZ) donor units were linked by three different strategies: (i) ester condensation, (ii) ether synthesis, and (iii) ring closing metathesis. Detailed X-ray crystallographic, photophysical and computational analyses show that the cyclophane molecular architecture alters the conformational distribution of the PTZ units, while retaining a certain degree of rotational freedom of the intersegmental D-A axes that is crucial for efficient TADF. Despite their different structures, the cyclophanes and their nonbridged precursors have similar photophysical properties since they emit through similar excited states resulting from the presence of the equatorial conformation of their PTZ donor segments. In particular, the axial-axial conformations, known to be detrimental to the TADF process, are suppressed by linking the PTZ units to form a cyclophane. The work establishes a versatile linking strategy that could be used in further functionalization while retaining the excellent photophysical properties of the parent D-A-D system.
RESUMO
A facile efficient synthetic tool, Buchwald-Hartwig cross-coupling reaction, for the functionalization of 1,2,4,5-tetrazines is presented. Important factors affecting the Buchwald-Hartwig cross-coupling reaction have been optimized. Seven new donor-acceptor tetrazine molecules (TA1-TA7) were conveniently prepared in good to high yields (61-72%). They have been subsequently engaged in the inverse electron demand Diels-Alder (iEDDA) reaction with cyclooctyne. The photophysical and electrochemical properties of the new pyridazines have been studied. Some are fluorescent acting as turn-on probes. More importantly, two pyridazines (DA3 and DA6) exhibit room-temperature phosphorescence (RTP) properties.
RESUMO
A novel and unexpected convenient one-pot synthesis of 1,2,3,4-thiatriazoles has been discovered while investigating the classical tetrazine "Pinner synthesis". The synthetic route starts from commercially-available nitrile derivatives and gives good to high yields (51-80 %) with no need to isolate any thioacylating agents. The crucial impact of the solvent on the outcome of the modified "Pinner synthesis" is moreover examined and discussed. Using this new synthetic route, a novel donor-acceptor thiatriazole derivative has been prepared, which exhibits prominent thermally-activated delayed fluorescence (TADF) in both solution and film. The photoluminescence quantum yield (PLQY) in methylcyclohexane (MCH) and Zeonex (a cyclo olefin polymer) in oxygen-free conditions were determined to be 76 and 99 %, respectively. This work provides an efficient and practical synthetic approach to functionalized 1,2,3,4-thiatriazole derivatives, and will noticeably facilitate the application of 1,2,3,4-thiatriazole as an electron acceptor in organic electronics.
RESUMO
Thermally activated delayed fluorescence (TADF) and room-temperature phosphorescence (RTP) are known to occur in organic D-A-D and D-A systems where the donor group contains the phenothiazine unit and the acceptor is dibenzothiophene- S, S-dioxide. This study reports the synthesis and characterization of one new D-A and four new D-A-D systems with methoxy groups on the phenothiazine to examine their effect on emission properties in the zeonex matrix. X-ray analysis and highly specialized NMR techniques were used to characterize asymmetric methoxy-substituted derivative 3b, which is chiral at N because of an extremely high flipping barrier at the phenothiazine N atom. Based on hybrid-density functional theory computations, the methoxy substituents tune the relative stabilities of the axial conformers with respect to equatorial conformers of the phenothiazine units, depending on their substitution position. This conformational effect significantly influences both TADF and RTP contributions compared to the parent D-A-D system. It is also demonstrated that the equatorial forms of D-A-D and D-A systems in zeonex exhibit TADF. Additionally, the methoxy groups promote luminescence in D-A-D systems where only axial conformers exist. This work reveals further design opportunities for more efficient TADF and RTP molecules.
RESUMO
Phenazine derivative molecules were studied using steady state and time resolved fluorescence techniques and demonstrated to lead to strong formation of aggregated species, identified as dimers by time dependent density functional theory calculations. Blended films in a matrix of Zeonex®, produced at different concentrations, showed different contributions of dimer and monomer emissions in a prompt time frame, e.g. less than 50 ns. In contrast, the phosphorescence (e.g. emission from the triplet state) shows no significant effect on dimer formation, although strong dependence of the phosphorescence intensity on concentration is observed, leading to phosphorescence being quenched at higher concentration.
RESUMO
The synthesis of 1-methylphenoxazine via CO2-directed lithiation chemistry is reported. This electron donor was coupled with 2,8-dibromodibenzothiophene- S, S-dioxide with Buchwald-Hartwig chemistry to give a new donor-acceptor-donor charge-transfer fluorescent molecule 1b. X-ray crystal structures and calculations show that the phenoxazinyl groups are coplanar and equatorial (eq) to the acceptor plane in nonmethylated 1a but are pyramidal and axial (ax) in 1b. The bond rotation energy barriers between donor and acceptor groups for 1a and 1b are only 0.13 and 0.19 eV, respectively, from hybrid-DFT computations at the CAM-B3LYP/6-31G(d) level. Many possible conformers are present in solutions and in zeonex. In zeonex, the methyl groups in 1b shift the emission band 0.13 eV higher in energy compared to 1a. Excited state eq-eq and ax-ax geometries were identified with DFT calculations with charge transfer (CT) emission assigned as 1CT(eq) and 1CT(ax) dominating. The lower energy 1CT(eq) contributes to thermally activated delayed fluorescence, whereas the higher energy 1CT(ax) does not. Phenothiazine analogues 2a and 2b also have major fluorescence emissions assigned as 1CT(eq) and 1CT(ax), respectively. 2a and 2b have substantial room temperature phosphorescence (RTP), whereas 1a and 1b do not, highlighting the importance of the sulfur atom in 2a and 2b to obtain RTP emission.
RESUMO
This article describes a convenient method for the synthesis of ONNO-type tetradentate 6,6'-bis(2-phenoxy)-2,2'-bipyridine (bipyridine bisphenolate, BpyBph) ligands and their platinum(II) complexes. The methodology includes the synthesis of 1,2,4-triazine precursors followed by their transformation to functionalized pyridines by the Boger reaction. Two complementary routes employing 3,3'- and 5,5'-bis-triazines allow a modification of the central pyridine rings in different positions, which was exemplified by the introduction of cyclopentene rings. The new ligands were used to prepare highly luminescent ONNO-type Pt(II) complexes. The position of the cyclopentene rings significantly influences the solubility and photophysical properties of these complexes. Derivatives with closely positioned cyclopentene rings are soluble in organic solvents and proved to be the best candidate for solution-processable organic light-emitting devices (OLEDs), showing efficient single-dopant candlelight electroluminescence.
RESUMO
Chemical modification of phenothiazine-benzophenone derivatives tunes the emission behavior from triplet states by selecting the geometry of the intramolecular charge transfer (ICT) state. A fundamental principle of planar ICT (PICT) and twisted ICT (TICT) is demonstrated to obtain selectively either room temperature phosphorescence (RTP) or thermally activated delayed fluorescence (TADF), respectively. Time-resolved spectroscopy and time-dependent density functional theory (TD-DFT) investigations on polymorphic single crystals demonstrate the roles of PICT and TICT states in the underlying photophysics. This has resulted in a RTP molecule OPM, where the triplet states contribute with 89 % of the luminescence, and an isomeric TADF molecule OMP, where the triplet states contribute with 95 % of the luminescence.
RESUMO
The mechanism of thermally activated delayed fluorescence (TADF) in molecules in aggregated or condensed solid states has been rarely studied and is not well understood. Nevertheless, many applications of TADF emitters are strongly affected by their luminescence properties in the aggregated state. In this study, two new isomeric tetradentate CuI complexes which simultaneously show aggregation induced emission (AIE) and TADF characteristics are reported for the first time. We provide direct evidence that effectively restricting the vibrations of individual molecules is a key requisite for TADF in these two CuI complexes through in-depth photophysical measurements combined with kinetic methods, single crystal analysis and theoretical calculations. These findings should stimulate new molecular engineering endeavours in the design of AIE-TADF active materials with highly emissive aggregated states.
RESUMO
The optical properties of phenazine derivative probe solutions involving intersystem crossing from singlet to triplet states were investigated by time resolved spectroscopy. The room temperature phosphorescence emission presented different time responses when Cd2+ ions were bound to the probe chemical structure. The complex exciplex formation observed to occur in this case was not directly responsible for the change in the phosphorescence lifetime. This was more influenced by the new molecular conformation and modified spin-orbit coupling imposed by the binding of the Cd2+ ions to the phenazine molecules.
RESUMO
The kinetics of thermally activated delayed fluorescence (TADF) is investigated in dilute solutions of organic materials with application in blue light-emitting diodes (OLEDs). A method to accurately determine the energy barrier (ΔE(a)) and the rate of reverse intersystem crossing (kRisc) in TADF emitters is developed, and applied to investigate the triplet-harvesting mechanism in blue-emitting materials with large singlet-triplet energy gap (ΔE(ST)). In these materials, triplet-triplet annihilation (TTA) is the dominant mechanism for triplet harvesting; however, above a threshold temperature TADF is able to compete with TTA and give enhanced delayed fluorescence. Evidence is obtained for the interplay between the TTA and the TADF mechanisms in these materials.
RESUMO
A novel series of donor-acceptor-donor (D-A-D) structured pyridine derivatives were synthesised and detailed photo-physical investigations were made using mainly steady-state and time-resolved spectroscopy techniques at varying temperatures. The investigations showed that the molecules have solvent polarity and temperature dependent excited-state configurations, confirmed in two different polarity solvents (295-90 K), i.e. methyl cyclohexane (MCH) and 2-methyltetrahdrofurane (2-MeTHF). In MCH, the investigations revealed dual fluorescence over the temperature range of 295-90 K. At 295 K, the ground-state configuration of the molecules has a partially twisted geometry as determined by DFT calculation, yet the emission originates totally from a locally excited (LE) state, however once the temperature is lowered to 90 K, the twisted molecular configuration is stabilised, and the emission originates from a fully-relaxed intramolecular charge transfer state (ICT), this is contrary to the systems where structural reorganisation stabilises ICT and this is frozen out at low temperatures. The DFT calculations revealed different ground state molecular configurations due to the presence of different electron-donating groups, e.g. the molecule including anthracene groups has a near 90° twisted geometry whereas the triphenylamine including molecule has a pyramidal geometrical folding, therefore, the decrease in temperature restricts the donor degree of rotational freedom. In 2-MeTHF solution, the fluorescence spectrum of both molecules is always of ICT character, but gradually red-shifts through the fluid to glass transition temperature (â¼135 K), in this case, the fluorescence occurs after structural and solvent-shell relaxations, however, upon cooling below 135 K, the spectra dramatically shift back to blue giving rise to strong emission from an ICT excited-state (but not the LE state) where the molecules have unrelaxed geometries. This significant change in the nature of the emitting species was explained with specific solvent-solute dynamic interactions in the vicinity of the solvation shell and the effect of thermal excitation of molecular vibrational modes of the C-C bond linking donor and acceptor units. Finally, we confirmed that the molecules have ICT ground-state geometry in the solid-state phase (spin-coated films), and the time-resolved decay dynamics were investigated comparing the spin-coated films (at RT and 25 K) and MCH solutions (at 295 K and 90 K).
RESUMO
In this paper we investigate the delayed fluorescence (DF) phenomena in the widely used laser dye, rhodamine 6G, and its derivative ATTO-532 as a function of excitation energy using highly sensitive time-resolved gated nanosecond spectroscopy. Excitation with UV laser radiation results in delayed emission, which arises from singlet states created from geminate pair recombination, not triplet annihilation. For the first time the origins and photo-physical properties of delayed fluorescence in these highly fluorescent molecules are elucidated.
Assuntos
Elétrons , Fluorescência , Rodaminas/química , Estrutura Molecular , Tamanho da Partícula , Porosidade , Propriedades de SuperfícieRESUMO
The high luminescence efficiency of cyclometallated iridium(iii) complexes, including those widely used in OLEDs, is typically attributed solely to the formally spin-forbidden phosphorescence process being facilitated by spin-orbit coupling with the Ir(iii) centre. In this work, we provide unequivocal evidence that an additional mechanism can also participate, namely a thermally activated delayed fluorescence (TADF) pathway. TADF is well-established in other materials, including in purely organic compounds, but has never been observed in iridium complexes. Our findings may transform the design of iridium(iii) complexes by including an additional, faster fluorescent radiative decay pathway. We discover it here in a new dinuclear complex, 1, of the form [Ir(N^C)2]2(µ-L), where N^C represents a conventional N^C-cyclometallating ligand, and L is a bis-N^O-chelating bridging ligand derived from 4,6-bis(2-hydroxyphenyl)-pyrimidine. Complex 1 forms selectively as the rac diastereoisomer upon reaction of [Ir(N^C)2(µ-Cl)]2 with H2L under mild conditions, with none of the alternative meso isomer being separated. Its structure is confirmed by X-ray diffraction. Complex 1 displays deep-red luminescence in solution or in polystyrene film at room temperature (λem = 643 nm). Variable-temperature emission spectroscopy uncovers the TADF pathway, involving the thermally activated re-population of S1 from T1. At room temperature, TADF reduces the photoluminescence lifetime in film by a factor of around 2, to 1 µs. The TADF pathway is associated with a small S1-T1 energy gap ΔEST of approximately 50 meV. Calculations that take into account the splitting of the T1 sublevels through spin-orbit coupling perfectly reproduce the experimentally observed temperature-dependence of the lifetime over the range 20-300K. A solution-processed OLED comprising 1 doped into the emitting layer at 5 wt% displays red electroluminescence, λEL = 625 nm, with an EQE of 5.5% and maximum luminance of 6300 cd m-2.
RESUMO
Six new four-coordinate tetrahedral boron complexes, containing 9-borafluoren-9-yl and diphenylboron cores attached to orthogonal fluorine- and chlorine-substituted 8-quinolinolato ligand chromophores, have been synthesised, characterised, and applied as emitters in organic light-emitting diodes (OLEDs). An extensive steady-state and time-resolved photophysical study, in solution and in the solid state, resulted in the first-time report of delayed fluorescence (DF) in solid films of 8-quinolinolato boron complexes. The DF intensity dependence on excitation dose suggests that this emission originates from triplet-triplet annihilation (TTA). Density functional theory (DFT) and time-dependent density functional theory (TDDFT) studies give insight into the ground and excited state geometries, electronic structures, absorption energies, and singlet-triplet gaps in these new organoboron luminophores. Finally, given their highly luminescent behaviour, organic light-emitting diode (OLED) devices were produced using the synthesised organoboron compounds as emissive fluorescent dopants. The best OLED displays green-blue (λmaxEL = 489 nm) electroluminescence with an external quantum efficiency (EQE) of 3.3% and a maximum luminance of 6300 cd m-2.
RESUMO
We report on the mechanism of enhancing the luminance and external quantum efficiency (EQE) by developing nanostructured channels in hybrid (organic/inorganic) light-emitting transistors (HLETs) that combine a solution-processed oxide and a polymer heterostructure. The heterostructure comprised two parts: (i) the zinc tin oxide/zinc oxide (ZTO/ZnO), with and without ZnO nanowires (NWs) grown on the top of the ZTO/ZnO stack, as the charge transport layer and (ii) a polymer Super Yellow (SY, also known as PDY-132) layer as the light-emitting layer. Device characterization shows that using NWs significantly improves luminance and EQE (≈1.1%â¯@â¯5000 cd m-2) compared to previously reported similar HLET devices that show EQE < 1%. The size and shape of the NWs were controlled through solution concentration and growth time, which also render NWs to have higher crystallinity. Notably, the size of the NWs was found to provide higher escape efficiency for emitted photons while offering lower contact resistance for charge injection, which resulted in the improved optical performance of HLETs. These results represent a significant step forward in enabling efficient and all-solution-processed HLET technology for lighting and display applications.