RESUMO
Radio spectrum is a scarce resource. To meet demands, new wireless technologies must operate in shared spectrum over unlicensed bands (coexist). We consider coexistence of Long-Term Evolution (LTE) License-Assisted Access (LAA) with incumbent Wi-Fi systems. Our scenario consists of multiple LAA and Wi-Fi links sharing an unlicensed band; we aim to simultaneously optimize performance of both coexistence systems. To do this, we present a technique to continuously estimate the Pareto frontier of parameter sets (traces) which approximately maximize all convex combinations of network throughputs over network parameters. We use a dimensionality reduction approach known as active subspaces to determine that this near-optimal parameter set is primarily composed of two physically relevant parameters. A choice of two-dimensional subspace enables visualizations augmenting explainability and the reduced-dimension convex problem results in approximations which dominate random grid search.
RESUMO
PURPOSE: A standard MRI system phantom has been designed and fabricated to assess scanner performance, stability, comparability and assess the accuracy of quantitative relaxation time imaging. The phantom is unique in having traceability to the International System of Units, a high level of precision, and monitoring by a national metrology institute. Here, we describe the phantom design, construction, imaging protocols, and measurement of geometric distortion, resolution, slice profile, signal-to-noise ratio (SNR), proton-spin relaxation times, image uniformity and proton density. METHODS: The system phantom, designed by the International Society of Magnetic Resonance in Medicine ad hoc committee on Standards for Quantitative MR, is a 200 mm spherical structure that contains a 57-element fiducial array; two relaxation time arrays; a proton density/SNR array; resolution and slice-profile insets. Standard imaging protocols are presented, which provide rapid assessment of geometric distortion, image uniformity, T1 and T2 mapping, image resolution, slice profile, and SNR. RESULTS: Fiducial array analysis gives assessment of intrinsic geometric distortions, which can vary considerably between scanners and correction techniques. This analysis also measures scanner/coil image uniformity, spatial calibration accuracy, and local volume distortion. An advanced resolution analysis gives both scanner and protocol contributions. SNR analysis gives both temporal and spatial contributions. CONCLUSIONS: A standard system phantom is useful for characterization of scanner performance, monitoring a scanner over time, and to compare different scanners. This type of calibration structure is useful for quality assurance, benchmarking quantitative MRI protocols, and to transition MRI from a qualitative imaging technique to a precise metrology with documented accuracy and uncertainty.
Assuntos
Processamento de Imagem Assistida por Computador , Imageamento por Ressonância Magnética , Espectroscopia de Ressonância Magnética , Imagens de Fantasmas , Razão Sinal-RuídoRESUMO
BACKGROUND: Scanner upgrades due to software and hardware changes are an inevitable part of MR research and, without quality assurance protocols, can jeopardize studies. PURPOSE: To evaluate changes in T1 relaxation time by inversion recovery (IR) and variable flip angle (VFA) measurements on a 3T system that underwent an "everything but the magnet" upgrade. STUDY TYPE: Longitudinal. PHANTOM: An International Society of Magnetic Resonance in Medicine / National Institute of Standards and Technology (ISMRM/NIST) system phantom with repeated measurements across multiple (n = 3) days. FIELD STRENGTH/SEQUENCE: T1 IR, VFA at 3T. ASSESSMENT: The T1 measurements by IR and VFA were compared with the nuclear magnetic resonance (NMR) measurements, which constitute the known values for the ISMRM/NIST system phantom, to determine the measurement error. STATISTICAL TESTS: Descriptive. RESULTS: The T1 VFA measurement errors were distributed around zero (-15% to +10%) on the original system and then the errors were distributed entirely above zero post-upgrade (+5% to 30%). The T1 IR results had a dramatic increase in error distribution (±5% original, ±20% post-upgrade) prior to the identification of signal saturation as an issue. Once the signal saturation was accounted for, the T1 IR errors decreased to ±10% post-upgrade. DATA CONCLUSION: The T1 VFA measurement differences between the original and post-upgrade systems can be entirely attributed to contributions from B1 . The T1 IR measurements demonstrate the need for quantitative quality assurance (QA) processes. The site under study passed the QA protocols in place, which did not identify the increased T1 error, nor the signal saturation issue. To improve on this study, we would make systematic, quantitative measurements at intervals less than a year and following any hardware or software upgrade. LEVEL OF EVIDENCE: 1 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2019. J. Magn. Reson. Imaging 2019;50:1948-1954.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Imageamento por Ressonância Magnética/instrumentação , Imageamento por Ressonância Magnética/métodos , Estudos Longitudinais , Imagens de Fantasmas , Reprodutibilidade dos TestesRESUMO
In computational materials science, coarse-graining approaches often lack a priori uncertainty quantification (UQ) tools that estimate the accuracy of a reduced-order model before it is calibrated or deployed. This is especially the case in coarse-grained (CG) molecular dynamics (MD), where "bottom-up" methods need to run expensive atomistic simulations as part of the calibration process. As a result, scientists have been slow to adopt CG techniques in many settings because they do not know in advance whether the cost of developing the CG model is justified. To address this problem, we present an analytical method of coarse-graining rigid-body systems that yields corresponding intermolecular potentials with controllable levels of accuracy relative to their atomistic counterparts. Critically, this analysis: (i) provides a mathematical foundation for assessing the quality of a CG force field without running simulations; and (ii) provides a tool for understanding how atomistic systems can be viewed as appropriate limits of reduced-order models. Simulated results confirm the validity of this approach at the trajectory level and point to issues that must be addressed in coarse-graining fully non-rigid systems.
RESUMO
In computational materials science, predicting the yield strain of crosslinked polymers remains a challenging task. A common approach is to identify yield as the first critical point of stress-strain curves simulated by molecular dynamics (MD). However, in such cases the underlying data can be excessively noisy, making it difficult to extract meaningful results. In this work, we propose an alternate method for identifying yield on the basis of deformation-recovery simulations. Notably, the corresponding raw data (i.e. residual strains) produce a sharper signal for yield via a transition in their global behavior. We analyze this transition by non-linear regression of computational data to a hyperbolic model. As part of this analysis, we also propose uncertainty quantification techniques for assessing when and to what extent the simulated data is informative of yield. Moreover, we show how the method directly tests for yield via the onset of permanent deformation and discuss recent experimental results, which compare favorably with our predictions.
RESUMO
A channel mismatch calibration method is proposed for use in time-interleaved digital real-time oscilloscope (DRTO) applications. Linear equations are derived using Fourier transforms of the separated signals from each of the time-interleaved analog-to-digital converters (TIADCs). Thus the errors in the TIADCs can be easily calibrated by inversion of a matrix, as opposed to most previous work where additional filters are employed. The calibration accuracy of the proposed method is limited only by the noise produced after the TIADC circuitry, while other methods depend on the filter design. A transfer function measurement method is then proposed for application to commercially available DRTOs. Two-tone signals are measured using DRTOs from various suppliers to validate the proposed method. The occurrence of signals at spurious frequencies is considerably reduced, as demonstrated by the calibrated results.
RESUMO
Recent innovations in quantitative magnetic resonance imaging (MRI) measurement methods have led to improvements in accuracy, repeatability, and acquisition speed, and have prompted renewed interest to reevaluate the medical value of quantitative T1. The purpose of this study was to determine the bias and reproducibility of T1 measurements in a variety of MRI systems with an eye toward assessing the feasibility of applying diagnostic threshold T1 measurement across multiple clinical sites. We used the International Society of Magnetic Resonance in Medicine/National Institute of Standards and Technology (ISMRM/NIST) system phantom to assess variations of T1 measurements, using a slow, reference standard inversion recovery sequence and a rapid, commonly-available variable flip angle sequence, across MRI systems at 1.5 tesla (T) (two vendors, with number of MRI systems n = 9) and 3 T (three vendors, n = 18). We compared the T1 measurements from inversion recovery and variable flip angle scans to ISMRM/NIST phantom reference values using Analysis of Variance (ANOVA) to test for statistical differences between T1 measurements grouped according to MRI scanner manufacturers and/or static field strengths. The inversion recovery method had minor over- and under-estimations compared to the NMR-measured T1 values at both 1.5 T and 3 T. Variable flip angle measurements had substantially greater deviations from the NMR-measured T1 values than the inversion recovery measurements. At 3 T, the measured variable flip angle T1 for one vendor is significantly different than the other two vendors for most of the samples throughout the clinically relevant range of T1. There was no consistent pattern of discrepancy between vendors. We suggest establishing rigorous quality control procedures for validating quantitative MRI methods to promote confidence and stability in associated measurement techniques and to enable translation of diagnostic threshold from the research center to the entire clinical community.
Assuntos
Imageamento por Ressonância Magnética/métodos , Imageamento por Ressonância Magnética/normas , Imagens de Fantasmas , Humanos , Valores de Referência , Reprodutibilidade dos TestesRESUMO
In 2007, the National Institute of Standards and Technology and the International Society for Clinical Densitometry designed a survey to prioritize 7 research and standardization action items to improve accuracy and cross-comparability of dual-energy X-ray absorptiometry (DXA) measurements of bone mineral density. In this article, we analyze the 1074 survey responses as one means to define consensus priorities of the community studying bone health and to determine possible correlations between prioritization and demographic data, including geographic location, years of experience practicing DXA, and medical specialty. We find that the distribution of ranks from all respondents is such that we can conclude with statistical confidence that there are perceived distinctions between the relative merits of the 7 action items. Applying a standard vote-counting rule to the data, we determine a complete ranking of the action items. We observe that a consistent ranking of each action item across all demographic subcategories is hard to achieve. When we arrange the 7 action items into 4 groups, however, we can determine a reasonably consistent prioritization. The group containing the development of standard reference databases and phantoms receives the highest priority. In addition, we report consistent themes that emerge from the free-response portion of the survey.
Assuntos
Absorciometria de Fóton/normas , Densidade Óssea , Osteoporose/diagnóstico por imagem , Inquéritos e Questionários , Absorciometria de Fóton/instrumentação , Calibragem , Humanos , Imagens de Fantasmas , Controle de Qualidade , Proteção Radiológica , Padrões de Referência , Medição de Risco , Sociedades , Sociedades Médicas , Avaliação da Tecnologia BiomédicaRESUMO
Motivated by the challenges of uncertainty quantification for coarse-grained (CG) molecular dynamics, we investigate the role of perturbation theory in model reduction of classical systems. In particular, we consider the task of coarse-graining rigid bodies in the context of generalized multipole potentials that have controllable levels of accuracy relative to their atomistic counterparts. We show how the multipole framework yields a hierarchy of models that systematically connects a CG "point molecule" approximation to the exact dynamics. We use these results to understand when and how the CG models fail to describe atomistic dynamics at the trajectory level and develop asymptotic error estimates for approximate molecular potential energies. Implications for other model-reduction strategies are also discussed. Key findings of this work are that (i) omitting rotational energy introduces significant error when coarse-graining and (ii) attention to symmetry can improve accuracy of "point-molecule" approximations. Analytical derivations and numerical results support these conclusions. Relevance to nonrigid bodies is also discussed.
RESUMO
We demonstrate the ability of multiple forms of optical coherence tomography (OCT) in the frequency domain to quantitatively size scatterers. Combined with a variety of distinct phantoms, we gain insight into the measurement uncertainties associated with using scattering spectra to size scatterers. We size spherical scatterers on a surface using swept-source OCT with an analysis based on a simple slab-mode resonance model. Automating this technique, a two-dimensional (2-D) image is created by raster scanning across a surface phantom designed to have a distinct size transition to demonstrate accuracy and repeatability. We also investigate the potential of a novel sphere-nanotube structure as a quantitative calibration artifact for use in comparing measured intensity and phase scattering spectra directly to Mie theory predictions. In another experiment, we demonstrate tissue-relevant sizing of scatterers as small as 5 microm on a surface by use of a Fourier domain OCT system with 280 nm of bandwidth from a supercontinuum source. We perform an uncertainty analysis for our high-resolution sizing system, estimating a sizing error of 9% for measurements of spheres with a diameter of 15 microm. With appropriate modifications, our uncertainty analysis has general applicability to other sizing techniques utilizing scattering spectra.
Assuntos
Algoritmos , Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador/métodos , Imagens de Fantasmas , Análise Espectral/métodos , Tomografia de Coerência Óptica/instrumentação , Tomografia de Coerência Óptica/métodos , Luz , Espalhamento de RadiaçãoRESUMO
We demonstrate a novel technique to determine the size of Mie scatterers with high sensitivity. Our technique is based on spectral domain optical coherence tomography measurements of the dispersion that is induced by the scattering process. We use both Mie scattering predictions and dispersion measurements of phantoms to show that the scattering dispersion is very sensitive to small changes in the size and/or refractive index of the scatterer. We also show the light scattered from a single sphere is, in some cases, non-minimum phase, and therefore the phase of the scattered light is independent of the intensity. Phase dispersion measurements may have application to distinguishing the size and refractive index of scattering particles in biological tissue samples.
RESUMO
This article reports and discusses the results of the recent ISCD-NIST Workshop on Standards and Measurements for Assessing Bone Health. The purpose of the workshop was to assess the status of efforts to standardize and compare results from dual-energy X-ray absorptiometry (DXA) scans, and then to identify and prioritize ongoing measurement and standards needs.