Biphoton engineering using modal spatial overlap on-chip.

Photon pairs generated by spontaneous parametric downconversion are essential for optical quantum information processing, in which the quality of biphoton states is crucial for the performance. To engineer the biphoton wave function (BWF) on-chip, the pump envelope function and the phase matching function are commonly adjusted, while the modal field overlap has been considered as a constant in the frequency range of interest. In this work, by using modal coupling in a system of coupled waveguides, we explore the modal field overlap as a new degree of freedom for biphoton engineering. We provide design examples for on-chip generations of polarization entangled photons and heralded single photons. This strategy can be applied to waveguides of different materials and structures, offering new possibilities for photonic quantum state engineering.

Spectrally pure photon pair generation in asymmetric heterogeneously coupled waveguides.

In this work, we develop a design methodology to generate spectrally pure photon pairs in asymmetric heterogeneously coupled waveguides by spontaneous parametric down conversion. Mode coupling in a system of waveguides is used to directly tailor the group velocity of a supermode to achieve group velocity matching that is otherwise not allowed by material dispersion. Design examples based on thin film lithium niobate waveguides are provided, demonstrating high spectral purity and temperature tunability. This approach is a versatile strategy applicable to waveguides of different materials and structures, allowing more versatility in single-photon source designs.

Interaction of Lamb Wave Modes with Weak Material Nonlinearity: Generation of Symmetric Zero-Frequency Mode.

The symmetric zero-frequency mode induced by weak material nonlinearity during Lamb wave propagation is explored for the first time. We theoretically confirm that, unlike the second harmonic, phase-velocity matching is not required to generate the zero-frequency mode and its signal is stronger than those of the nonlinear harmonics conventionally used, for example, the second harmonic. Experimental and numerical verifications of this theoretical analysis are conducted for the primary S0 mode wave propagating in an aluminum plate. The existence of a symmetric zero-frequency mode is of great significance, probably triggering a revolutionary progress in the field of non-destructive evaluation and structural health monitoring of the early-stage material nonlinearity based on the ultrasonic Lamb waves.

Single-shot isotropic differential interference contrast microscopy.

Differential interference contrast (DIC) microscopy allows high-contrast, low-phototoxicity, and label-free imaging of transparent biological objects, and has been applied in the field of cellular morphology, cell segmentation, particle tracking, optical measurement and others. Commercial DIC microscopy based on Nomarski or Wollaston prism resorts to the interference of two polarized waves with a lateral differential offset (shear) and axial phase shift (bias). However, the shear generated by these prisms is limited to the rectilinear direction, unfortunately resulting in anisotropic contrast imaging. Here we propose an ultracompact metasurface-assisted isotropic DIC (i-DIC) microscopy based on a grand original pattern of radial shear interferometry, that converts the rectilinear shear into rotationally symmetric along radial direction, enabling single-shot isotropic imaging capabilities. The i-DIC presents a complementary fusion of typical meta-optics, traditional microscopes and integrated optical system, and showcases the promising and synergetic advancements in edge detection, particle motion tracking, and label-free cellular imaging.

Accurate aberration correction in confocal microscopy based on modal sensorless method.

Confocal microscopy has the advantages of high resolution and optical sectioning ability over conventional microscopy. However, aberration induced by the optical system can compromise these advantages and considerably reduce the energy reaching the pointlike detector. We propose an accurate aberration correction method with a liquid-crystal spatial light modulator (LCSLM) in the confocal system. Each coefficient of Zernike aberration modes is calculated by directly measuring the variance of the images with different bias aberration modes. Large-coefficient (>0.7 rad) aberration is compensated first by LCSLM, following which aberrations with small coefficients are measured precisely, minimizing the cross talk between different kinds of aberrations. With this predistortion strategy, the aberration correction is much more accurate, and maximum image intensity in the normal and nonconjugated systems is improved by 2.5 times and 4 times compared to the normal correction method, respectively, demonstrating the effectiveness of our method.

Experimental and Numerical Study of Nonlinear Lamb Waves of a Low-Frequency S0 Mode in Plates with Quadratic Nonlinearity.

This paper investigates the propagation of low-frequency S0 mode Lamb waves in plates with quadratic nonlinearity through numerical simulations and experimental measurements. Both numerical and experimental results manifest distinct ultrasonic nonlinear behavior which is mainly presented by the second harmonics. Meanwhile, we find that both the acoustic nonlinearity parameter and dispersion distance show the exponential decay trend with the increase of frequency-thickness. Moreover, the results reveal that the frequency is key to affect the acoustic nonlinearity parameter and dispersion distance with the same frequency-thickness. This study theoretically and experimentally reveals that nonlinear Lamb waves of the low-frequency S0 mode are feasible to quantitatively identify material weak nonlinearity in plates.

Generation Mechanism of Nonlinear Rayleigh Surface Waves for Randomly Distributed Surface Micro-Cracks.

This paper investigates the propagation of Rayleigh surface waves in structures with randomly distributed surface micro-cracks using numerical simulations. The results revealed a significant ultrasonic nonlinear effect caused by the surface micro-cracks, which is mainly represented by a second harmonic with even more distinct third/quadruple harmonics. Based on statistical analysis from the numerous results of random micro-crack models, it is clearly found that the acoustic nonlinear parameter increases linearly with micro-crack density, the proportion of surface cracks, the size of micro-crack zone, and the excitation frequency. This study theoretically reveals that nonlinear Rayleigh surface waves are feasible for use in quantitatively identifying the physical characteristics of surface micro-cracks in structures.

Simulations on Monitoring and Evaluation of Plasticity-Driven Material Damage Based on Second Harmonic of S0 Mode Lamb Waves in Metallic Plates.

In this study, a numerical approach-the discontinuous Meshless Local Petrov-Galerkin-Eshelby Method (MLPGEM)-was adopted to simulate and measure material plasticity in an Al 7075-T651 plate. The plate was modeled in two dimensions by assemblies of small particles that interact with each other through bonding stiffness. The material plasticity of the model loaded to produce different levels of strain is evaluated with the Lamb waves of S0 mode. A tone burst at the center frequency of 200 kHz was used as excitation. Second-order nonlinear wave was extracted from the spectrogram of a signal receiving point. Tensile-driven plastic deformation and cumulative second harmonic generation of S0 mode were observed in the simulation. Simulated measurement of the acoustic nonlinearity increased monotonically with the level of tensile-driven plastic strain captured by MLPGEM, whereas achieving this state by other numerical methods is comparatively more difficult. This result indicates that the second harmonics of S0 mode can be employed to monitor and evaluate the material or structural early-stage damage induced by plasticity.