RESUMO
In recent years, frequency-multiplexed metasurfaces have received extensive attention due to the increasing demand for multifunction integration and communication capacity. However, multi-channel studies achieved with a mono-layered frequency-multiplexed metasurface are limited. Herein, a universal design strategy for a frequency-multiplexed mono-layered geometric phase metasurface is proposed by utilizing Pancharatnam-Berry (PB) phase modulations. The elementary meta-atom is judiciously designed to transmit the cross-polarized component of a circularly polarized incident wave at four distinct frequencies with independent 360° phase shifts and a constant amplitude of 0.48, close to the theoretical limit of 0.5. As a proof-of-concept demonstration, a four-channel meta-hologram is designed to achieve distinct holographic images of "three foci", "five foci", "J" and "X" at 7.2â GHz, 9.1â GHz, 10.9â GHz, and 15.2â GHz respectively. The images are projected in the desired azimuth planes by exploiting the time-shifting properties of the Fourier transform. The experimental and full-wave simulation results are in good agreement, which indicates that the proposed strategy has great potentials in various applications, such as multi-channel imaging and information encryption technology.
RESUMO
An interleaved coding Janus metasurface is proposed, which can generate bidirectional functionalities with full phase control of the reflected and transmitted waves. By introducing rotation and geometric parameter changes into the meta-atoms, the reflection and transmission channels with required energy distribution and foci are realized. More remarkably, our approach is based on a single metasurface design that arranges two types of unidirectional propagating unit structures with simultaneous desired reflection and transmission properties into a checkerboard configuration to obtain four different holograms. The results verify the excellent performances of the multifunctional metasurface, laying a foundation for manipulation of EM waves with more degree of freedom, and promoting its applications in the entire frequency spectrum.
RESUMO
Here, we propose a double-face copper-cladded meta-hologram that can efficiently manipulate the amplitude of electromagnetic waves in both transmission and reflection spaces, depending on the polarization state of the incident electromagnetic wave. The proposed meta-hologram is validated by encoding the transmission-reflection amplitude information of two independent images into a single metasurface. The holographic images obtained from measurements agree qualitatively with simulation results. The proposed metasurface presents a novel, to the best of our knowledge, scheme for electromagnetic wavefront control in the whole space and overcomes the limitations of narrow frequency band operation.
RESUMO
Broadband metasurfaces have attracted significant attention for a variety of applications in imaging and communication systems. Here, a method to alleviate the chromatic aberrations issue is proposed in the microwave region using dynamic phase compensation enabled by a reconfigurable metasurface. The dispersion characteristic of the meta-atom implemented with varactor diodes can be flexibly manipulated electronically, such that the dispersion-induced phase distortions over a wide frequency band can be compensated dynamically to achieve broadband performances. Various aberration-free functionalities can be realized with the proposed active metasurface. Near-field measurements are performed on a fabricated prototype to demonstrate aberration-free beam bending and hologram imaging, showing good agreement with simulation results. Such an active metasurface platform paves the way to efficient devices for wireless power transfer, sensors, and communication and antenna systems at radio or much higher frequencies.
RESUMO
Metasurfaces presenting diversified functionalities have broadened the prospect of manipulating the phase, amplitude, and polarization from the optical to microwave fields. Although the frequency-multiplexing strategy is one of the intuitive and effective approaches to expand the number of channels, demonstrations reporting on the combination between directional asymmetric transmission and frequency-multiplexing via an ultrathin flat device are limited. In this study, a novel, to the best of our knowledge, strategy is proposed to generate four independent holographic images under opposite illumination directions at two operating frequencies, utilizing a single metasurface composed of two types of metallic resonators and one grating layer. Specifically, each scattering channel with independent information makes full use of the whole metasurface. Simulation and experimental results show good agreement, highlighting the attractive capabilities of the multi-functional metasurface platform, which provides more freedom for the manipulation of electromagnetic waves.
RESUMO
This paper presents two devices to detect the liquid dielectric characterization. The differential method was used to enhance the robustness and reduce tolerance. A basic sensor based on defected ground structure (DGS) was designed and the optimization for the squares of the DGS via adaptive genetic algorithm was applied to enhance the performance of the microwave sensor, which was shown by the difference of the two resonant frequencies. Furthermore, the electric field distribution was enhanced. Glass microcapillary tubes were used to hold samples to provide an environment of non-invasive. The optimized device exhibited the sensitivity of 0.076, which is more than 1.52 times than the basic structure. It could be considered a sensitive and robust sensor with quick response time for liquid dielectric characterization.
RESUMO
Self-accelerating optical Airy beams present attractive characteristics such as self-bending and non-diffraction, which have rendered this field a research hotspot in recent years. In this paper, the desired phase changes of the unit cell structure for the transmitted cross-polarized wave can be realized by modifying the rotation angle of the unit cell, while the amplitude can be modulated by changing the inner diameter R of the double layer split-ring resonator (SRR). As such, the amplitude and phase modulations can be performed simultaneously and independently to achieve the desired transmitted wave envelope. Furthermore, a novel, to the best of our knowledge, strategy of 2D Airy beam deflection control is also presented by simultaneously modifying the phase and amplitude of the envelope of the transmitted beam, and its feasibility is theoretically and experimentally demonstrated. Our proposed designs suggest high application potentials in the fields of optical particle manipulation, controllable wireless energy transmission, and complex terrain exploration.
RESUMO
In this work, a polarization-free coding metasurface is proposed to manipulate circularly polarized waves. Compared to a Pancharatnam-Berry phase metasurface, the proposed design not only allows for overcoming anti-symmetrical response characteristics between orthogonal circularly polarized states to enable achieving identical functionality under both right-handed and left-handed circularly polarized wave illuminations and avoiding polarization-conversion losses but also offers additional degree of freedom in the control of handedness. As a proof-of-concept demonstration, a polarization-free multi-bit coding metasurface is designed to realize helicity-switched holograms in the microwave region. Experimental measurements performed on a fabricated prototype reveal outstanding imaging quality with extremely high imaging efficiency above 76% for arbitrary polarizations at 10â GHz. Our proposed method expands the route in manipulating circularly polarized waves and can be applied over the whole electromagnetic spectrum for wavefront manipulation.
RESUMO
Huygens metasurface, as a subcategory of metamaterials, shows great potential in the capacity and efficiency of electromagnetic wave manipulation within a subwavelength scale. Here, the transmission-type Huygens metasurface is demonstrated for complete and independent control of orthogonally polarized transmitted waves by constructing pairs of crossed electric and magnetic resonances in three-sheet meta-atoms as the building blocks for holographic imaging. Under incoherent horizontally and vertically polarized illuminations, two designated holographic images with negligible mutual interferences are accomplished with at least 62.95% measured imaging efficiency and 63.53 signal-to-noise ratio, respectively. This work addresses several major issues in traditional polarization-multiplexed holography with regard to transmission-coefficient manipulation capacity, image fidelity, and simple fabrication technique, empowering advanced research and applications in polarization-selective microwave devices and information processing.
RESUMO
In this paper, coding Huygens' metasurface (CHM) is proposed for holographic imaging with enhanced quality. A weighted holographic algorithm is used to calculate the phase distribution at the interface and to design the CHM. Experimental demonstration performed in the microwave region validates holographic imaging with the ability to modulate energy distribution among focal points and improve image quality. By judiciously engineering both electric and magnetic dipolar resonators, the proposed digital Huygens' meta-atom is able to provide a full transmission-phase covering the whole range of 2π together with a near-unity transmission efficiency. The proof-of-concept experiments show that holographic imaging quality can be indeed improved by using digital meta-atoms with several bits. Furthermore, the modulation of intensity distribution among focal points is experimentally realized by using the 3-bits CHM. The proposed CHM hologram shows great potential in a variety of application fields, such as programmable high-resolution imaging lenses, microscopy, data storage, information processing, and computer-generated holograms.
RESUMO
An ultrathin reflection-type metamirror is proposed for multi-focusing with any desired focusing fashion including focal number and location. The metamirror is composed of reflection-type Pancharatnam-Berry (P-B) phase elements, which are able to provide full reflection phase of 2π, together with near-unity reflection efficiency by judiciously engineering the rotation angle of each latter element. A holographic algorithm is utilized to calculate the phase distribution at the interface of the metamirror to achieve the desired multi-focus spots. Experimental demonstrations performed in microwave region show good imaging quality with high reflection efficiency and imaging efficiency. The proposed metamirror provides a high-performance solution for low-cost and lightweight beam-shaping and beam-focusing devices.
RESUMO
In this paper, a holographic metasurface possessing beam scanning capability at fixed frequency is presented. The desired radiation beam is obtained by using a reference wave to excite a sinusoidally-modulated impedance surface, which is equivalent to the interference pattern between the radiation wave and reference wave. By changing the bias voltage of varactor diodes loaded on the sub-wavelength unit cells, the variation range of the modulated impedance can be tuned, resulting in the change of radiation angle. Both the simulation and experimental results demonstrate that the direction of the radiation beam can be tuned in the range from 23° to 50° at 5.5 GHz. The proposed holographic metasurface shows great potential applications in constructing planar beam scanning antenna for integrated microwave system.
RESUMO
A metal-dielectric-metal gradient phase partially reflecting surface based on the combination of a gradient index dielectric substrate with an inductive and a capacitive grids, is designed at microwave frequencies for antenna applications. The gradient index is obtained by realizing air holes of different dimensions in a dielectric host material. A prototype of the gradient index dielectric substrate is fabricated through three-dimensional printing, an additive fabrication technology. It is then associated to two patterned metallic grids to realize a partially reflecting surface with a gradient phase behavior. For experimental validation, the partially reflective surface is used as reflector in a low-profile Fabry-Perot cavity antenna. An angular enhancement of the emitted beam in a desired direction is reported by further engineering the phase introduced by the inductive and the capacitive grids. Far-field measurements are performed on fabricated antenna prototypes to validate the concept. Such gradient phase reflective surface paves the way to low-cost easy-made microwave metal-dielectric surfaces incorporating functionalities such as beam control, forming and collimation.
RESUMO
In this paper, ultra-thin metalenses are proposed to generate converging and non-diffractive vortex beam carrying orbital angular momentum (OAM) in microwave region. Phase changes are introduced to the transmission cross-polarized wave by tailoring spatial orientation of Pancharatnam-Berry phase unit cell. Based on the superposition of phase profile of spiral phase plate and that of a converging lens or an axicon, vortex beam carrying OAM mode generated by the metalens can also exhibit characteristics of a focusing beam or a Bessel beam. Measured field intensities and phase distributions at microwave frequencies verify the theoretical design procedure. The proposed method provides an efficient approach to control the radius of vortex beam carrying OAM mode in microwave wireless applications for medium-short range distance.
RESUMO
In this paper, a planar waveguide based on spoof surface plasmon polaritons (SSPPs) with metals on both sides of the corrugated strip as grounds is firstly proposed in microwave region. Simple and efficient conversion between guided waves and SSPPs is realized by gradient corrugated strip with grounds on both sides. Compared with plasmonic waveguide with flaring ground [Laser Photonics Rev. 8, 146 (2014)], the addition of grounds suppresses the radiation loss effectively and improves the low-frequency performance with tighter field confinement, which leads to a wider operating bandwidth. Moreover, as the asymptotic frequency of SSPPs decreasing, the confinement of SSPPs is further enhanced by a defected ground structure (DGS), which is achieved by the periodic grooves symmetrical to those on the corrugated strip. Therefore, miniaturization of the proposed waveguide can be realized. Measured results validate both high efficiency of momentum and impedance matching and enhanced performance in the region of lower frequencies with the wave vectors close to those in free space. Such results have significant values in plasmonic functional devices and integrated circuits in microwave frequencies.
RESUMO
In this paper, a novel optical logic operator based on the multifunctional metasurface driven by all-optical diffractive neural network is reported, which can perform four principal quantum logic operations (Pauli-X, Pauli-Y, Pauli-Z, and Hadamard gates). The two ground states | 0 ⟩ $|0 \rangle $ and | 1 ⟩ $|1 \rangle $ â are characterized by two orthogonal linear polarization states. The proposed spatial- and polarization-multiplexed all-optical diffractive neural network only contains a hidden layer physically mapped as a metasurface with simple and compact unit cells, which dramatically reduces the volume and computing resources required for the system. The designed optical quantum operator is proven to achieve high fidelities for all four quantum logical gates, up to 99.96% numerically and 99.88% experimentally. The solution will facilitate the construction of large-scale optical quantum computing systems and scalable optical quantum devices.
RESUMO
Metasurfaces have shown unparalleled controllability of electromagnetic (EM) waves. However, most of the metasurfaces need external spatial feeding sources, which renders practical implementation quite challenging. Here, a low-profile programmable metasurface with 0.05λ0 thickness driven by guided waves is proposed to achieve dynamic control of both amplitude and phase simultaneously. The metasurface is fed by a guided wave traveling in a substrate-integrated waveguide, avoiding external spatial sources and complex power divider networks. By manipulating the state of the p-i-n diodes embedded in each meta-atom, the proposed metasurface enables 1-bit amplitude switching between radiating and nonradiating states, as well as a 1-bit phase switching between 0° and 180°. As a proof of concept, two advanced functionalities, namely, low sidelobe-level beam scanning and Airy beam generation, are experimentally demonstrated with a single platform operating in the far- and near-field respectively. Such complex-amplitude, programmable, and low-profile metasurfaces can overcome integration limitations of traditional metasurfaces, and open up new avenues for more accurate and advanced EM wave control within an unprecedented degree of freedom.
RESUMO
Perovskite quantum dots (QDs), emerging with excellent bright-green photoluminescence (PL) and a large absorption coefficient, are of great potential for the fabrication of light sources in underwater optical wireless communication systems. However, the instability caused by low formation energy and abundant surface traps is still a major concern for perovskite-based light sources in underwater conditions. Herein, we propose ultra-stable zero dimensional-two dimensional (0D-2D) CsPbBr3 QD/1,4-bis(4-methylstyryl)benzene (p-MSB) nanoplate (NP) heterostructures synthesized via a facile approach at room temperature in air. CsPbBr3 QDs can naturally nucleate on the p-MSB NP toluene solution, and the radiative combination is drastically intensified owing to the electron transfer within the typical type-II heterostructures, leading to a sharply increased PLQY of the heterostructure thin films up to 200% compared with the pristine sample. The passivation of defects within CsPbBr3 QDs can be effectively realized with the existence of p-MSB NPs, and thus the obviously improved PL is steadily witnessed in an ambient atmosphere and thermal environment. Meanwhile, the enhanced humidity stability and a peak EQE of 9.67% suggests a synergetic strategy for concurrently addressing the knotty problems on unsatisfied luminous efficiency and stability of perovskites for high-performance green-emitting optoelectronic devices in underwater applications.
RESUMO
In fluorescence microscopy, computational algorithms have been developed to suppress noise, enhance contrast, and even enable super-resolution (SR). However, the local quality of the images may vary on multiple scales, and these differences can lead to misconceptions. Current mapping methods fail to finely estimate the local quality, challenging to associate the SR scale content. Here, we develop a rolling Fourier ring correlation (rFRC) method to evaluate the reconstruction uncertainties down to SR scale. To visually pinpoint regions with low reliability, a filtered rFRC is combined with a modified resolution-scaled error map (RSM), offering a comprehensive and concise map for further examination. We demonstrate their performances on various SR imaging modalities, and the resulting quantitative maps enable better SR images integrated from different reconstructions. Overall, we expect that our framework can become a routinely used tool for biologists in assessing their image datasets in general and inspire further advances in the rapidly developing field of computational imaging.
RESUMO
Differential interference contrast (DIC) microscopy allows high-contrast, low-phototoxicity, and label-free imaging of transparent biological objects, and has been applied in the field of cellular morphology, cell segmentation, particle tracking, optical measurement and others. Commercial DIC microscopy based on Nomarski or Wollaston prism resorts to the interference of two polarized waves with a lateral differential offset (shear) and axial phase shift (bias). However, the shear generated by these prisms is limited to the rectilinear direction, unfortunately resulting in anisotropic contrast imaging. Here we propose an ultracompact metasurface-assisted isotropic DIC (i-DIC) microscopy based on a grand original pattern of radial shear interferometry, that converts the rectilinear shear into rotationally symmetric along radial direction, enabling single-shot isotropic imaging capabilities. The i-DIC presents a complementary fusion of typical meta-optics, traditional microscopes and integrated optical system, and showcases the promising and synergetic advancements in edge detection, particle motion tracking, and label-free cellular imaging.