In situ fabrication of atomically adjacent dual-vacancy sites for nearly 100% selective CH4 production.

The photocatalytic CO2-to-CH4 conversion involves multiple consecutive proton-electron coupling transfer processes. Achieving high CH4 selectivity with satisfactory conversion efficiency remains challenging since the inefficient proton and electron delivery path results in sluggish proton-electron transfer kinetics. Herein, we propose the fabrication of atomically adjacent anion-cation vacancy as paired redox active sites that could maximally promote the proton- and electron-donating efficiency to simultaneously enhance the oxidation and reduction half-reactions, achieving higher photocatalytic CO2 reduction activity and CH4 selectivity. Taking TiO2 as a photocatalyst prototype, the operando electron paramagnetic resonance spectra, quasi in situ X-ray photoelectron spectroscopy measurements, and high-angle annular dark-field-scanning transmission electron microscopy image analysis prove that the VTi on TiO2 as initial sites can induce electron redistribution and facilitate the escape of the adjacent oxygen atom, thereby triggering the dynamic creation of atomically adjacent dual-vacancy sites during photocatalytic reactions. The dual-vacancy sites not only promote the proton- and electron-donating efficiency for CO2 activation and protonation but also modulate the coordination modes of surface-bound intermediate species, thus converting the endoergic protonation step to an exoergic reaction process and steering the CO2 reduction pathway toward CH4 production. As a result, these in situ created dual active sites enable nearly 100% CH4 selectivity and evolution rate of 19.4 µmol g-1 h-1, about 80 times higher than that of pristine TiO2. Thus, these insights into vacancy dynamics and structure-function relationship are valuable to atomic understanding and catalyst design for achieving highly selective catalysis.

Resolving the overlooked photochemical nitrophenol transformation mechanism induced by nonradical species under visible light.

Nitrophenols present on the surface of particulates are ubiquitous in the atmosphere. However, its atmospheric photochemical transformation pathway remains unknown, for which the crucial effect of visible light is largely overlooked, resulting in an incomplete understanding of the effects of nitrophenols in the atmospheric environment. This study delves into the photolysis mechanism of 4-nitrophenol (4NP), one of the most abundant atmospheric nitrophenol compounds, on the surface of photoactive particulates under visible light irradiation. Unexpectedly, the nonradical species (singlet oxygen, 1O2) was identified as a dominant factor in driving the visible photolysis of 4NP. The pathways of HONO and p-benzoquinone (C6H4O2) generation were clarified by acquiring direct evidence of C-N and O-H bond breakage in the nitro (-NO2) and hydroxyl (-OH) groups of 4NP. The further decomposition of HONO results in the generation of NO and hydroxyl radicals, which could directly contribute to atmospheric oxidizing capacity and complicate the PM2.5 composition. Significantly, the behavior of 1O2-induced visible photolysis of 4NP was universal on the surface of common particulates in the atmosphere, such as A1 dust and Fe2O3. This work advances the understanding of the photochemical transformation mechanism of particulate-phase atmospheric nitrophenols, which is indispensable in elucidating the role of nitrophenols in atmospheric chemistry.

Boosting exciton dissociation and charge transfer in CsPbBr3 QDs via ferrocene derivative ligation for CO2 photoreduction.

Photo-catalytic CO2 reduction with perovskite quantum dots (QDs) shows potential for solar energy storage, but it encounters challenges due to the intricate multi-electron photoreduction processes and thermodynamic and kinetic obstacles associated with them. This study aimed to improve photo-catalytic performance by addressing surface barriers and utilizing multiple-exciton generation in perovskite QDs. A facile surface engineering method was employed, involving the grafting of ferrocene carboxylic acid (FCA) onto CsPbBr3 (CPB) QDs, to overcome limitations arising from restricted multiple-exciton dissociation and inefficient charge transfer dynamics. Kelvin Probe Force Microscopy and XPS spectral confirmed successfully creating an FCA-modulated microelectric field through the Cs active site, thus facilitating electron transfer, disrupting surface barrier energy, and promoting multi-exciton dissociations. Transient absorption spectroscopy showed enhanced charge transfer and reduced energy barriers, resulting in an impressive CO2-to-CO conversion rate of 132.8 µmol g-1 h-1 with 96.5% selectivity. The CPB-FCA catalyst exhibited four-cycle reusability and 72 h of long-term stability, marking a significant nine-fold improvement compared to pristine CPB (14.4 µmol g-1 h-1). These results provide insights into the influential role of FCA in regulating intramolecular charge transfer, enhancing multi-exciton dissociation, and improving CO2 photoreduction on CPB QDs. Furthermore, these findings offer valuable knowledge for controlling quantum-confined exciton dissociation to enhance CO2 photocatalysis.

Boosted C-C coupling with Cu-Ag alloy sub-nanoclusters for CO2-to-C2H4 photosynthesis.

The selective photocatalytic conversion of CO2 and H2O to high value-added C2H4 remains a great challenge, mainly attributed to the difficulties in C-C coupling of reaction intermediates and desorption of C2H4* intermediates from the catalyst surface. These two key issues can be simultaneously overcome by alloying Ag with Cu which gives enhanced activity to both reactions. Herein, we developed a facile stepwise photodeposition strategy to load Cu-Ag alloy sub-nanoclusters (ASNCs) on TiO2 for CO2 photoreduction to produce C2H4. The optimized catalyst exhibits a record-high C2H4 formation rate (1110.6 ± 82.5 µmol g-1 h-1) with selectivity of 49.1 ± 1.9%, which is an order-of-magnitude enhancement relative to current work for C2H4 photosynthesis. The in situ FT-IR spectra combined with DFT calculations reveal the synergistic effect of Cu and Ag in Cu-Ag ASNCs, which enable an excellent C-C coupling capability like Ag and promoted C2H4* desorption property like Cu, thus advancing the selective and efficient production of C2H4. The present work provides a deeper understanding on cluster chemistry and C-C coupling mechanism for CO2 reduction on ASNCs and develops a feasible strategy for photoreduction CO2 to C2 fuels or industrial feedstocks.

Promoting the efficiency and selectivity of NO3--to-NH3 reduction on Cu-O-Ti active sites via preferential glycol oxidation with holes.

The combined reductive and oxidative reaction is the essence of a solar-driven photoredox system. Unfortunately, most of these efforts focus on the specific half-reactions, and the key roles of complete photoredox reactions have been overlooked. Taking the nitrate reduction reaction (NO3-RR) as a typical multiple-electrons involved process, the selective reduction of the NO3- into ammonia (NH3) synthesis with high efficiency is still a grand challenge. Herein, a rational oxidative half-reaction is tailored to achieve the selective conversion of NO3- to NH3 on Cu-O-Ti active sites. Through the coupled NO3-RR with glycol oxidation reaction system, a superior NH3 photosynthesis rate of 16.04 ± 0.40 mmol gcat-1 h-1 with NO3- conversion ratio of 100% and almost 100% of NH3 selectivity is reached on Cu-O-Ti bimetallic oxide cluster-anchored TiO2 nanosheets (CuOx@TNS) catalyst. A combination of comprehensive in situ characterizations and theoretical calculations reveals the molecular mechanism of the synergistic interaction between NO3-RR and glycol oxidation pair on CuOx@TNS. The introduction of glycol accelerates the h+ consumption for the formation of alkoxy (•R) radicals to avoid the production of •OH radicals. The construction of Cu-O-Ti sites facilitates the preferential oxidation of glycol with h+ and enhances the production of e- to participate in NO3-RR. The efficiency and selectivity of NO3--to-NH3 synthesis are thus highly promoted on Cu-O-Ti active sites with the accelerated glycol oxidative half-reaction. This work upgrades the conventional half photocatalysis into a complete photoredox system, demonstrating the tremendous potential for the precise regulation of reaction pathway and product selectivity.

Upregulation of nuclear protein Hemgn by transcriptional repressor Gfi1 through repressing PU.1 contributes to the anti-apoptotic activity of Gfi1.

Gfi1 is a transcriptional repressor that plays a critical role in hematopoiesis. The repressive activity of Gfi1 is mediated mainly by its SNAG domain that interacts with and thereby recruits the histone demethylase LSD1 to its target genes. An important function of Gfi1 is to protect hematopoietic cells against stress-induced apoptosis, which has been attributed to its participation in the posttranscriptional modifications of p53 protein, leading to suppression of p53 activity. In this study, we show that Gfi1 upregulated the expression of Hemgn, a nuclear protein, through a 16-bp promoter region spanning from +47 to +63 bp relative to the transcription start site (TSS), which was dependent on its interaction with LSD1. We further demonstrate that Gfi1, Ikaros and PU.1 bound to this 16-bp region. However, while Ikaros activated Hemgn and collaborated with Gfi1 to augment Hemgn expression, it was not required for Gfi1-mediated Hemgn upregulation. In contrast, PU.1 repressed Hemgn and inhibited Hemgn upregulation by Gfi1. Notably, PU.1 knockdown and deficiency, while augmenting Hemgn expression, abolished Hemgn upregulation by Gfi1. PU.1 (Spi-1) has been shown to be repressed by Gfi1. We show here that PU.1 repression by Gfi1 preceded and correlated well with Hemgn upregulation. Thus, our date strongly suggest that Gfi1 upregulates Hemgn by repressing PU.1. In addition, we demonstrate that Hemgn upregulation contributed to the anti-apoptotic activity of Gfi1 in a p53-independent manner.

Steering Photooxidation of Methane to Formic Acid over A Priori Screened Supported Catalysts.

Efficient methane photooxidation to formic acid (HCOOH) has emerged as a sustainable approach to simultaneously generate value-added chemicals and harness renewable energy. However, the persistent challenge lies in achieving a high yield and selectivity for HCOOH formation, primarily due to the complexities associated with modulating intermediate conversion and desorption after methane activation. In this study, we employ first-principles calculations as a comprehensive guiding tool and discover that by precisely controlling the O2 activation process on noble metal cocatalysts and the adsorption strength of carbon-containing intermediates on metal oxide supports, one can finely tune the selectivity of methane photooxidation products. Specifically, a bifunctional catalyst comprising Pd nanoparticles and monoclinic WO3 (Pd/WO3) would possess optimal O2 activation kinetics and an intermediate oxidation/desorption barrier, thereby promoting HCOOH formation. As evidenced by experiments, the Pd/WO3 catalyst achieves an exceptional HCOOH yield of 4.67 mmol gcat-1 h-1 with a high selectivity of 62% under full-spectrum light irradiation at room temperature using molecular O2. Notably, these results significantly outperform the state-of-the-art photocatalytic systems operated under identical condition.

Halogen-Site Regulation in Cs3Bi2X9 Quantum Dots for Efficient and Selective Oxidation of Benzyl Alcohol Driven by Solar Light.

Sluggish charge kinetics and low selectivity limit the solar-driven selective organic transformations under mild conditions. Herein, an efficient strategy of halogen-site regulation, based on the precise control of charge transfer and molecule activation by rational design of Cs3Bi2X9 quantum dots photocatalysts, is proposed to achieve both high selectivity and yield of benzyl-alcohol oxidation. In situ PL spectroscopy study reveals that the Bi─Br bonds formed in the form of Br-associated coordination can enhance the separation and transfer of photoexcited carriers during the practical reaction. As the active center, the exclusive Bi─Br covalence can benefit the benzyl-alcohol activation for producing carbon-centered radicals. As a result, the Cs3Bi2Br9 with this atomic coordination achieves a conversion ratio of 97.9% for benzyl alcohol and selectivity of 99.6% for aldehydes, which are 56.9- and 1.54-fold higher than that of Cs3Bi2Cl9. Combined with quasi-in situ EPR, in situ ATR-FTIR spectra, and DFT calculation, the conversion of C6H5-CH2OH to C6H5-CH2* at Br-related coordination is revealed to be a determining step, which can be accelerated via halogen-site regulation for enhancing selectivity and photocatalytic efficiency. The mechanistic insights of this research elucidate how halogen-site regulation in favor of charge transfer and molecule activation toward efficient and selective oxidation of benzyl alcohol.

The relationship between innate/adaptive immunity and gastrointestinal cancer : a multi-omics Mendelian randomization study.

BACKGROUND: Innate/adaptive immunity is the key to anti-tumor therapy. However, its causal relationship to Gastrointestinal (GI) cancer remains unclear. METHODS: Immunity genes were extracted from the MSigDB database. The Genome-wide association studies (GWAS) summary data of GI cancer were integrated with expression quantitative trait loci (eQTL) and DNA methylation quantitative trait loci (mQTL) associated with genes. Summary-data-based Mendelian randomization (SMR) and co-localization analysis were used to reveal causal relationships between genes and GI cancer. Two-sample MR analysis was used for sensitivity analysis. Single cell analysis clarified the enrichment of genes. RESULTS: Three-step SMR analysis showed that a putative mechanism, cg17294865 CpG site regulating HLA-DRA expression was negatively associated with gastric cancer risk. HLA-DRA was significantly differentially expressed in monocyte/macrophage and myeloid cells in gastric cancer. CONCLUSION: This study provides evidence that upregulating the expression level of HLA-DRA can reduce the risk of gastric cancer.

Dissecting the Photochemical Reactivity of Metal Ions during Atmospheric Nitrate Transformations on Photoactive Mineral Dust.

Dissecting the photochemical reactivity of metal ions is a significant contribution to understanding secondary pollutant formation, as they have a role to be reckoned with atmospheric chemistry. However, their photochemical reactivity has received limited attention within the active nitrogen cycle, particularly at the gas-solid interface. In this study, we delve into the contribution of magnesium ion (Mg2+) and ferric ion (Fe3+) to nitrate decomposition on the surface of photoactive mineral dust. Under simulated sunlight irradiation, the observed NOX production rate differs by an order of magnitude in the presence of Mg2+ (6.02 × 10-10 mol s-1) and Fe3+ (2.07 × 10-11 mol s-1). The markedly decreased fluorescence lifetime induced by Mg2+ and the change in the valence of Fe3+ revealed that Mg2+ and Fe3+ significantly affect the concentration of nitrate decomposition products by distinct photochemical reactivity with photogenerated electrons. Mg2+ promotes NOX production by accelerating charge transfer, while Fe3+ hinders nitrate decomposition by engaging in a redox cyclic reaction with Fe2+ to consume photogenerated carriers continuously. Furthermore, when Fe3+ coexists with other metal ions (e.g., Mg2+, Ca2+, Na+, and K+) and surpasses a proportion of approximately 12%, the photochemical reactivity of Fe3+ tends to be dominant in depleting photogenerated electrons and suppressing nitrate decomposition. Conversely, below this threshold, the released NOX concentration increases sharply as the proportion of Fe3+ decreases. This research offers valuable insights into the role of metal ions in nitrate transformation and the generation of reactive nitrogen species, contributing to a deep understanding of atmospheric photochemical reactions.

Regulating the Selectivity of Nitrate Photoreduction for Purification or Ammonia Production by Cooperating Oxidative Half-Reactions.

The removal and conversion of nitrate (NO3-) from wastewater has become an important environmental and health topic. The NO3- can be reduced to nontoxic nitrogen (N2) for environmental remediation or ammonia (NH3) for recovery, in which the tailoring of the selectivity is greatly challenging. Here, by construction of the CuOx@TiO2 photocatalyst, the NO3- conversion efficiency is enhanced to ∼100%. Moreover, the precise regulation of selectivity to NH3 (∼100%) or N2 (92.67%) is accomplished by the synergy of cooperative redox reactions. It is identified that the selectivity of the NO3- photoreduction is determined by the combination of different oxidative reactions. The key roles of intermediates and reactive radicals are revealed by comprehensive in situ characterizations, providing direct evidence for the regulated selectivity of the NO3- photoreduction. Different active radicals are produced by the interaction of oxidative reactants and light-generated holes. Specifically, the introduction of CH3CHO as the oxidative reactant results in the generation of formate radicals, which drives selective NO3- reduction into N2 for its remediation. The alkyl radicals, contributed to by the (CH2OH)2 oxidation, facilitate the deep reduction of NO3- to NH3 for its upcycling. This work provides a technological basis for radical-directed NO3- reduction for its purification and resource recovery.

Efficient and Durable Oxidation Removal of Formaldehyde over Layered Double Hydroxide Catalysts at Room Temperature.

Room temperature catalytic oxidation (RTCO) using non-noble metals has emerged as a highly promising technique for removal of formaldehyde (HCHO) under ambient conditions; however, non-noble catalysts still face the challenges related to poor water resistance and low stability under harsh conditions. In this study, we synthesized a series of layered double hydroxides (LDHs) incorporating various dual metals (MgAl, ZnAl, NiAl, NiFe, and NiTi) for formaldehyde oxidation at ambient temperature. Among the synthesized catalysts, the NiTi-LDH catalyst showed an HCHO removal efficiency and CO2 yield close to 100.0%, and exceptional water resistance and chemical stability on running 1300 min. The abundant hydroxyl groups in LDHs directly bonded with HCHO, leading to the production of CO2 and H2O, thus inhibiting the formation of CO, even in the absence of O2 and H2O. The coexistence of O2 effectively reduced the reaction barrier for H2O molecule dissociation, facilitating the formation of hydroxyl groups and their subsequent backfill on the catalyst surface. The mechanisms underlying the involvement and regeneration of hydroxyl groups in room temperature oxidation of formaldehyde were elucidated with the combined in situ DRIFTS, HCHO-TPD-MS, and DFT calculations. This work not only demonstrates the potential of LDH catalysts in environmental applications but also advances the understanding of the fundamental processes involved in room temperature oxidation of formaldehyde.

Decoding the κ Opioid Receptor (KOR): Advancements in Structural Understanding and Implications for Opioid Analgesic Development.

The opioid crisis in the United States is a significant public health issue, with a nearly threefold increase in opioid-related fatalities between 1999 and 2014. In response to this crisis, society has made numerous efforts to mitigate its impact. Recent advancements in understanding the structural intricacies of the κ opioid receptor (KOR) have improved our knowledge of how opioids interact with their receptors, triggering downstream signaling pathways that lead to pain relief. This review concentrates on the KOR, offering crucial structural insights into the binding mechanisms of both agonists and antagonists to the receptor. Through comparative analysis of the atomic details of the binding site, distinct interactions specific to agonists and antagonists have been identified. These insights not only enhance our understanding of ligand binding mechanisms but also shed light on potential pathways for developing new opioid analgesics with an improved risk-benefit profile.

Dynamic in situ Formation of Cu2 O Sub-Nanoclusters through Photoinduced pseudo-Fehling's Reaction for Selective and Efficient Nitrate-to-Ammonia Photosynthesis.

Copper (Cu) is evidenced to be effective for constructing advanced catalysts. In particular, Cu2 O is identified to be active for general catalytic reactions. However, conflicting results regarding the true structure-activity correlations between Cu2 O-based active sites and efficiencies are usually reported. The structure of Cu2 O undergoes dynamic evolution rather than remaining stable under working conditions, in which the actual reaction cannot proceed over the prefabricated Cu2 O sites. Therefore, the dynamic construction of Cu2 O active sites can be developed to promote catalytic efficiency and reveal the true structure-activity correlations. Herein, by introducing the redox pairs of Cu2+ and reducing sugar into a photocatalysis system, it is clarified that the Cu2 O sub-nanoclusters (NCs), working as novel active sites, are on-site constructed on the substrate via a photoinduced pseudo-Fehling's route. The realistic interfacial charge separation and transformation capacities are remarkably promoted by the dynamic Cu2 O NCs under the actual catalysis condition, which achieves a milestone efficiency for nitrate-to-ammonia photosynthesis, including the targets of production rate (1.98±0.04 mol gCu -1 h-1 ), conversion ratio (94.2±0.91 %), and selectivity (98.6 %±0.55 %). The current work develops an effective strategy for integrating the active site construction into realistic reactions, providing new opportunities for Cu-based chemistry and catalysis sciences research.

Identification of Cu(111) as Superior Active Sites for Electrocatalytic NO Reduction to NH3 with High Single-Pass Conversion Efficiency.

Opting for NO as an N source in electrocatalytic NH3 synthesis presents an intriguing approach to tackle energy and environmental challenges. However, blindly pursuing high NH3 synthesis rates and Faradaic efficiency (FE) while ignoring the NO conversion ratio could result in environmental problems. Herein, Cu nanosheets with exposed (111) surface is fabricated and exhibit a NO-to-NH3 yield rate of 371.89 µmol cm-2 h-1 (flow cell) and the highest FE of 93.19±1.99 % (H-type cell). The NO conversion ratio is increased to the current highest value of 63.74 % combined with the development of the flow cell. Additionally, Crystal Orbital Hamilton Population (COHP) clearly reveals that the "σ-π* acceptance-donation" is the essence of the interaction between the Cu and NO as also supported by operando attenuated total reflection infrared spectroscopy (ATR-IRAS) in observing the key intermediate of NO- . This work not only achieves a milestone NO conversion ratio for electrocatalytic NO-to-NH3 , but also proposes a new descriptor that utilizes orbital hybridization between molecules and metal centers to accurately identify the real active sites of catalysts.

Photocatalytic Formamide Synthesis via Coupling of Electrophilic and Nucleophilic Radicals over Atomically Dispersed Bi Sites.

Formamide (HCONH2) plays a pivotal role in the manufacture of a diverse array of chemicals, fertilizers, and pharmaceuticals. Photocatalysis holds great promise for green fabrication of carbon-nitrogen (C-N) compounds owing to its environmental friendliness and mild redox capability. However, the selective formation of the C-N bond presents a significant challenge in the photocatalytic synthesis of C-N compounds. This work developed a photocatalytic radical coupling method for the formamide synthesis from co-oxidation of ammonia (NH3) and methanol (CH3OH). An exceptional formamide yield rate of 5.47±0.03 mmol ⋅ gcat -1 ⋅ h-1 (911.87±5 mmol ⋅ gBi -1 ⋅ h-1) was achieved over atomically dispersed Bi sites (BiSAs) on TiO2. An accumulation of 45.68 mmol ⋅ gcat -1 (2.0 g ⋅ gcat -1) of formamide was achieved after long-term illumination, representing the highest level of photocatalytic C-N compounds synthesis. The critical C-N coupling for formamide formation originated from the "σ-σ" interaction between electrophilic ⋅CH2OH with nucleophilic ⋅NH2 radical. The BiSAs sites facilitated the electron transfer between reactants and photocatalysts and enhanced the nucleophilic attack of ⋅NH2 radical on the ⋅CH2OH radical, thereby advancing the selective C-N bond formation. This work deepens the understanding of the C-N coupling mechanism and offers an intriguing photocatalytic approach for the efficient and sustainable production of C-N compounds.

Highly Efficient Acidic Electrosynthesis of Hydrogen Peroxide at Industrial-Level Current Densities Promoted by Alkali Metal Cations.

Acidic H2O2 synthesis through electrocatalytic 2e- oxygen reduction presents a sustainable alternative to the energy-intensive anthraquinone oxidation technology. Nevertheless, acidic H2O2 electrosynthesis suffers from low H2O2 Faradaic efficiencies primarily due to the competing reactions of 4e- oxygen reduction to H2O and hydrogen evolution in environments with high H+ concentrations. Here, we demonstrate the significant effect of alkali metal cations, acting as competing ions with H+, in promoting acidic H2O2 electrosynthesis at industrial-level currents, resulting in an effective current densities of 50-421 mA cm-2 with 84-100 % Faradaic efficiency and a production rate of 856-7842 µmol cm-2 h-1 that far exceeds the performance observed in pure acidic electrolytes or low-current electrolysis. Finite-element simulations indicate that high interfacial pH near the electrode surface formed at high currents is crucial for activating the promotional effect of K+. In situ attenuated total reflection Fourier transform infrared spectroscopy and ab initio molecular dynamics simulations reveal the central role of alkali metal cations in stabilizing the key *OOH intermediate to suppress 4e- oxygen reduction through interacting with coordinated H2O.

Bilateral Embedded Anchoring via Tailored Polymer Brush for Large-Area Air-Processed Blue Light-Emitting Diodes.

Perovskite light-emitting diodes (PeLEDs) that can be air-processed promises the development of displaying optoelectronic device, while is challenged by technical difficulty on both the active layer and hole transport layer (HTL) caused by the unavoidable humidity interference. Here, we propose and validate that, planting the polymer brush with tailored functional groups in inorganic HTL, provides unique bilateral embedded anchoring that is capable of simultaneously addressing the n phases crystallization rates in the active layer as well as the deteriorated particulate surface defects in HTL. Exemplified by zwitterionic polyethyleneimine-sulfonate (PEIS) in present study, its implanting in NiOx HTL offers abundant nuclei sites of amino and sulfonate groups that balance the growth rate of different n phases in quasi-2D perovskite films. Moreover, the PEIS effectively nailed the interfacial contact between perovskite and NiOx, and reduced the particulate surface defects in HTL, leading to the enhanced PLQY and stability of large-area blue perovskite film in ambient air. By virtue of these merits, present work achieves the first demonstration of the air-processed blue PeLEDs in large emitting area of 1.0 cm2 with peak external quantum efficiency (EQE) of 2.09 %, which is comparable to the similar pure-bromide blue PeLEDs fabricated in glovebox.

Selective Cleavage of Chemical Bonds in Targeted Intermediates for Highly Selective Photooxidation of Methane to Methanol.

Restrained by the uncontrollable cleavage process of chemical bonds in methane molecules and corresponding formed intermediates, the target product in the reaction of methane selective oxidation to methanol would suffer from an inevitable overoxidation process, which is considered to be one of the most challenging issues in the field of catalysis. Herein, we report a conceptually different method for modulating the conversion pathway of methane through the selective cleavage of chemical bonds in the key intermediates to suppress the generation of peroxidation products. Taking metal oxides, typical semiconductors in the field of methane oxidation as model catalysts, we confirm that the cleavage of different chemical bonds in CH3O* intermediates could greatly affect the conversion pathway of methane, which has a vital role in product selectivity. Specifically, it is revealed that the formation of peroxidation products could be significantly prevented by the selective cleavage of C-O bonds in CH3O* intermediates instead of metal-O bonds, which is proved by the combination of density functional theory calculations and in situ infrared spectroscopy based on isotope labeling. By manipulating the lattice oxygen mobility of metal oxides, the electrons transferring from the surface to the CH3O* intermediates could directionally inject into the antibonding orbitals of the C-O bond, resulting in its selective cleavage. As a result, the gallium oxide with low lattice oxygen mobility shows a 3.8% conversion rate for methane with a high methanol generation rate (∼325.4 µmol g-1 h-1) and selectivity (∼87.0%) under room temperature and atmospheric pressure in the absence of extra oxidants, which is superior among the reported studies (reaction pressure: <20 bar).

Targeted NO Oxidation and Synchronous NO2 Inhibition via Oriented 1O2 Formation Based on Lewis Acid Site Adjustment.

An appealing strategy for ensuring environmental benefits of the photocatalytic NO oxidation reaction is to convert NO into NO3- instead of NO2, yet the selectivity of products remains challenging. Here, such a scenario could be realized by tailoring the exposure of Lewis acid sites on the surface of ZrO2, aiming to precisely regulate the ROS evolution process for the selective oxidation of NO into NO3-. As evidenced by highly combined experimental characterizations and density functional theory (DFT) simulations, Lewis acid sites serving as electron acceptors could induce itinerant electron redistribution, charge-carrier transfer, and further oxidation of •O2-, which promotes the oriented formation of 1O2. As a result, monoclinic ZrO2 with more Lewis acid sites exhibited an outstanding NO conversion efficiency (56.33%) and extremely low NO2 selectivity (5.04%). The ROS-based reaction process and promotion mechanism of photocatalytic performance have been revealed on the basis of ESR analysis, ROS-quenching experiments, and in situ ROS-quenching DRIFTS. This work could provide a critical view toward oriented ROS formation and advance a unique mechanism of selective NO oxidation into NO3-.