Inflammation-Stimulated MSC-Derived Small Extracellular Vesicle miR-27b-3p Regulates Macrophages by Targeting CSF-1 to Promote Temporomandibular Joint Condylar Regeneration.

Small extracellular vesicles (sEVs) secreted by mesenchymal stem cells (MSCs) have been extensively studied in recent years. sEV contents change with the secreting cell state. When MSCs are exposed to an inflammatory environment, they release more functional growth factors, exosomes, and chemokines. Herein, MSCs are stimulated to alter sEV cargos and functions to regulate the inflammatory microenvironment and promote tissue regeneration. Sequencing of sEV miRNAs shows that certain RNAs conducive to cell function are upregulated. In this study, in vitro cell function experiments show that both inflammation-stimulated adipose-derived MSC (ADSC)-derived sEV (IAE) and normal ADSC-derived sEV (AE) promote cell proliferation; IAE also significantly improves cell migration. Regarding macrophage polarization regulation, IAE significantly promotes M2 macrophage differentiation. RNA-sequencing analysis indicates that high miR-27b-3p expression levels in IAE may regulate macrophages by targeting macrophage colony-stimulating factor-1 (CSF-1). In vivo, a rabbit temporomandibular joint (TMJ) condylar osteochondral defect model shows that both AE and IAE promote TMJ regeneration, with IAE having the most significant therapeutic effect. Therefore, the authors confirm that exposing MSCs to an inflammatory environment can feasibly enhance sEV functions and that modified sEVs achieve better therapeutic effects.

Compact and movable ozone differential absorption lidar system based on an all-solid-state, tuning-free laser source.

The differential absorption lidar (DIAL) has been proposed as an effective method for detecting polluted gases in the atmosphere. In this paper, we present a compact and movable ozone differential absorption (O3-DIAL) based on an all-solid-state and tuning-free laser source. For the first time, solid-state stimulated Raman scattering technology is used in the emitting source of the lidar for wavelength conversion. A high repetition frequency Innoslab laser is used for pumping SrWO4 crystals to get yellow lasers which can achieve up to 70% light-to-light conversion efficiency. Our results demonstrate that using the SrWO4 crystal as the Raman frequency-shifting media of the lidar laser source for obtaining the vertical profiles of tropospheric ozone in the Planetary Boundary Layer (PBL) is a suitable choice. As a compact movable lidar system, the results demonstrate the reliability and stability.

Bathing and toileting difficulties of older adults in rural China: the role of environment.

BACKGROUND: For older adults, difficulties in bathing and toileting are often the most prevalent in the index of Activities of daily living (ADL). This study aims to examine how environmental factors are associated with difficulty of bathing and toileting among older adults in rural China. METHOD: The data are from the 2014 Thousand-Village Survey (TVS), a national survey of Chinese rural residents of old age. The sample consists of 10,689 subjects, 55 years or older, from 536 villages across all provinces of China. Logistic regressions were applied to examine how difficulty of bathing and toileting was related to environmental factors such as geographic location, neighbourhood amenity, and related facilities of bathing and toileting. RESULTS: Older adults living in the Southern regions of China had lesser difficulty in bathing and toileting than those living in Northern China, controlling for other confounders. Better neighbourhood conditions also reduced the likelihood of having such disabilities. Persons who bathed indoors without showering facilities, in public facilities, and outdoors were significantly more likely to have bathing disability than those who showered indoors with facility. Rural older adults who used pedestal pans and indoor buckets for toileting were more likely to have toileting disability than those who used indoor squatting facilities. CONCLUSION: Environmental barriers were associated with functional disability among older adults in rural China, but the disabled individuals may change their environments to adapt to their functional capabilities. Our findings suggest that it is imperative to promote the use of showering facilities and pedestal pans for toileting in rural China.

Comparison of mixing layer height inversion algorithms using lidar and a pollution case study in Baoding, China.

Beijing-Tianjin-Hebei area is suffering from atmospheric pollution from a long time. The understanding of the air pollution mechanism is of great importance for officials to design strategies for the environmental governance. Mixing layer height (MLH) is a key factor influencing the diffusion of air pollutants. It plays an important role on the evolution of heavy pollution events. Light detection and ranging (lidar), is an effective remote-sensing tool, which can retrieve high spatial and temporal evolution process within mixing layer (ML), especially the variation of MLH. There are many methods to retrieve MLH, but each method has its own applicable limitations. The Mie-lidar data in Beijing was firstly used to compare three different algorithms which are widely used under different pollution levels. We find that the multi-layer structure near surface may cause errors in the detection of mixing layer. The MLH retrieved based on image edge detection was better than another two methods especially under heavy polluted episode. Then we applied this method to investigate the evolution of the mixing layer height during a pollution episode in December 2016. MLH at Gucheng county showed the positive correlation with the concentration of particulate matters during the start of this pollution episode. The elevated pollution level in Gucheng was not associated with MLH's decrease, and the significantly increased particulate matters raised the boundary layer, which trapped the pollutants near the surface.

[Two Data Inversion Algorithms of Aerosol Horizontal Distributiol Detected by MPL and Error Analysis].

Atmospheric aerosols have important impacts on human health, the environment and the climate system. Micro Pulse Lidar (MPL) is a new effective tool for detecting atmosphere aerosol horizontal distribution. And the extinction coefficient inversion and error analysis are important aspects of data processing. In order to detect the horizontal distribution of atmospheric aerosol near the ground, slope and Fernald algorithms were both used to invert horizontal MPL data and then the results were compared. The error analysis showed that the error of the slope algorithm and Fernald algorithm were mainly from theoretical model and some assumptions respectively. Though there still some problems exist in those two horizontal extinction coefficient inversions, they can present the spatial and temporal distribution of aerosol particles accurately, and the correlations with the forward-scattering visibility sensor are both high with the value of 95%. Furthermore relatively speaking, Fernald algorithm is more suitable for the inversion of horizontal extinction coefficient.

Correction: Chen et al. Multifunctional Injectable Hydrogel Loaded with Cerium-Containing Bioactive Glass Nanoparticles for Diabetic Wound Healing. Biomolecules 2021, 11, 702.

The authors would like to replace Figure 4A of the following published paper [...].

Multifunctional hydrogel/platelet-rich fibrin/nanofibers scaffolds with cell barrier and osteogenesis for guided tissue regeneration/guided bone regeneration applications.

Periodontal defect seriously affects people's life health and quality. Guided tissue regeneration (GTR) and guided bone regeneration (GBR) have made great progress in periodontal disease treatment, but some deficiencies existed in commercial materials of GTR and GBR. For obtaining better therapeutic effects, multifunctional composite scaffolds containing different biological macromolecules were developed in this study. Chitosan/poly (γ-glutamic acid)/nano-hydroxyapatite hydrogels (CP/nHA) made by electrostatic interactions and lyophilization were filled in the bone defects to achieve osteogenesis. Platelet-rich fibrin (PRF) extracted from blood could accelerate bone formation by releasing various bioactive substances as middle layer of composite scaffolds. Polycaprolactone/gelatin nanofibers (PG) prepared by electrospinning were attached to the junction of soft and hard tissue, which could prevent fibrous tissue from infiltrating into bone defects. The composite scaffolds showed good morphology, biocompatibility, cell barriers and osteogenic differentiation in vitro. The excellent ability of bone formation was verified by implantation of triple-layered composite scaffolds into alveolar bone defects in rabbit in vivo. The hierarchical structure was conducive to personalized customization to meet the needs of different defects. All in all, the multifunctional scaffolds could play important roles of GTR and GBR in alveolar bone regeneration and provide good application prospect for bone repair in clinic.

Sustained Release of BMSC-EVs from 3D Printing Gel/HA/nHAP Scaffolds for Promoting Bone Regeneration in Diabetic Rats.

Extracellular vesicles (EVs) play an important role in intercellular communication, and the function of EVs mainly depends on the state of source cells. To determine the effect of diabetic microenvironment on EVs secreted by bone marrow mesenchymal stem cells (BMSCs), this work explores the effect of normal glucose (5.5 mm) cultured BMSCs derived EVs (NG-EVs) and high glucose (30 mm) cultured BMSCs derived EVs (HG-EVs) in regulating the migration, proliferation and osteoblastic differentiation of BMSCs in vitro. In order to improve the bioavailability of EVs, this work constructs a sustained release system of polydopamine (PDA) functionalized 3D printing gelatin/hyaluronic acid/nano-hydroxyapatite (Gel/HA/nHAP) scaffolds (S/PDA) and verifies its function in the calvarial defect model of diabetic rats. This work confirms that both NG-EVs and HG-EVs can promote proliferation and migration, inhibit apoptosis and promote osteogenic differentiation, but the function of HG-EVs is weaker than that of NG-EVs. Therefore, EVs secreted by autologous cells of diabetic patients are not suitable for self-repair. This work hopes that the 3D printing scaffold designed for sustained-release EVs will provide a new strategy for acellular tissue engineering bone repair in diabetic patients.

Injectable hydrogel loaded with 4-octyl itaconate enhances cartilage regeneration by regulating macrophage polarization.

Macrophages play a distinctive role in the early stage of inflammation after cartilage defects. Previous studies have shown that macrophages can express different phenotypes, among which M2 polarization is important to maintain the balance of the inflammatory microenvironment and promote cartilage regeneration. In this study, 4-octyl itaconic acid (4-OI), a derivative of the endogenous metabolite itaconic acid, was used to regulate the polarization behavior of macrophages and enhance cartilage repair. Oxidized sodium alginate (OSA) and gelatin (GEL) were selected as materials to form injectable hydrogels with the function of sustained release of 4-OI. In vivo and in vitro experiments have verified that the OSA/GEL hydrogel system loaded with 4-OI could promote M2 macrophage polarization and inhibit the inflammatory reaction. A rat knee joint cartilage defect model further confirmed its role in promoting cartilage regeneration in the later stage. In this study, the OSA/GEL hydrogel was successfully fabricated as a vehicle for delivering 4-OI, which could evidently alleviate the inflammatory reaction and thus accelerate tissue regeneration. The results of this study provide a new method for promoting subsequent tissue regeneration by regulating the early immune response.

Self-assembled hyaluronic acid-coated nanocomplexes for targeted delivery of curcumin alleviate acute kidney injury.

Acute kidney injury (AKI) is a pathological process with high morbidity, and drug resistance is easy to occur due to untargeted drug therapy. Curcumin can repair acute kidney injury. The expression of the CD44 receptor in renal tubular epithelial cells is abnormally elevated during AKI, and hyaluronic acid (HA) has the ability to bind specifically to the CD44 receptor. In this study, we developed a hyaluronic acid-coated liposome (HALP) nanocomplexes that targeted renal epithelial cells and its effect of relieving AKI was investigated. HALP was formed by self-assembly through the electrostatic interaction of curcumin-loaded cationic liposomes (LP) with hyaluronic acid and responds to the release of curcumin in the acidic microenvironment of lesions to treat AKI. HALP had good stability and biocompatibility. The in vitro results showed that compared to LP, HALP exhibited higher antioxidant, anti-inflammatory, and anti-apoptotic capacities. The AKI model suggested that HALP could not only target and accumulate in the injured kidney but also had an excellent ability to reduce the inflammatory response, which decreased tubular necrosis and restored kidney function.

GelMA Hydrogel Loaded with Extracellular Vesicles Derived from Umbilical Cord Mesenchymal Stem Cells for Promoting Cutaneous Diabetic Wound Healing.

Chronic diabetic wounds have become a significant cause of disability worldwide. It is highly desired to develop effective therapies that can promote the rapid healing of diabetic wounds. Owing to the outstanding hydrophilic and water-retaining properties, hydrogels could accelerate the healing process. Extracellular vesicles (EVs) have shown the ability to promote cell regeneration and angiogenesis. In this study, we chose a gelatin methacryloyl (GelMA) hydrogel, a kind of biomaterial characteristic of good biocompatibility, to load the EVs derived from umbilical cord mesenchymal stem cells (UCMSCs) in order to have a long-lasting effect by consistent release of EVs. Then, the hydrogel with EVs was used to treat diabetic wounds in rat models. Nuclear magnetic resonance spectroscopy and scanning electron microscopy were used to characterize the synthesis of the hydrogel; cell experiments, animal experiments, and histological staining were used to evaluate the function of the hydrogel with EVs. The results show that the GelMA hydrogel incorporated with the UCMSC-derived EVs exhibits unique physicochemical properties, excellent biocompatibility, and much enhanced therapeutic effects for diabetic wounds.

[A new retrieval method for ozone concentration at the troposphere based on differential absorption lidar].

Aerosols interfere with differential absorption lidar ozone concentration measurement and can introduce significant errors. A new retrieval method was introduced, and ozone concentration and aerosol extinction coefficient were gained simultaneously based on the retrieval method. The variables were analyzed by experiment including aerosol lidar ratio, aerosol wavelength exponent, and aerosol-molecular ratio at the reference point. The results show that these parameters introduce error less than 8% below 1 km. The measurement error derives chiefly from signal noise and the parameters introduce error less than 3% above 1 km. Finally the vertical profile of tropospheric ozone concentration and aerosol extinction coefficient were derived by using this algorithm. The retrieval results of the algorithm and traditional dual-wavelength difference algorithm are compared and analyzed. Experimental results indicate that the algorithm is feasible, and the algorithm can reduce differential absorption lidar measurement error introduced by aerosol.

Atmospheric aerosol particle size distribution from Lidar data based on the lognormal distribution mode.

Analysis of the atmospheric Aerosol Particle Size Distribution (APSD) retrieved from Light Detection and Ranging (Lidar) data is one of the popular fields in atmospheric remote sensing. An APSD retrieval method based on the lognormal particle size distribution, the Mie theory, and the Second Simulation of the Satellite Signal in the Solar Spectrum (6S) were studied. According to the 6S, this method divides the main body of the aerosols into four basic components and calculates the APSD from Lidar data and the optical and microphysical characteristics of these components. Numerical simulation and experimental observations reveal that this method can obtain the APSD for particle sizes of >0.15 µm in the different vertical layers with good reliability.

In-vivo range verification analysis with in-beam PET data for patients treated with proton therapy at CNAO.

Morphological changes that may arise through a treatment course are probably one of the most significant sources of range uncertainty in proton therapy. Non-invasive in-vivo treatment monitoring is useful to increase treatment quality. The INSIDE in-beam Positron Emission Tomography (PET) scanner performs in-vivo range monitoring in proton and carbon therapy treatments at the National Center of Oncological Hadrontherapy (CNAO). It is currently in a clinical trial (ID: NCT03662373) and has acquired in-beam PET data during the treatment of various patients. In this work we analyze the in-beam PET (IB-PET) data of eight patients treated with proton therapy at CNAO. The goal of the analysis is twofold. First, we assess the level of experimental fluctuations in inter-fractional range differences (sensitivity) of the INSIDE PET system by studying patients without morphological changes. Second, we use the obtained results to see whether we can observe anomalously large range variations in patients where morphological changes have occurred. The sensitivity of the INSIDE IB-PET scanner was quantified as the standard deviation of the range difference distributions observed for six patients that did not show morphological changes. Inter-fractional range variations with respect to a reference distribution were estimated using the Most-Likely-Shift (MLS) method. To establish the efficacy of this method, we made a comparison with the Beam's Eye View (BEV) method. For patients showing no morphological changes in the control CT the average range variation standard deviation was found to be 2.5 mm with the MLS method and 2.3 mm with the BEV method. On the other hand, for patients where some small anatomical changes occurred, we found larger standard deviation values. In these patients we evaluated where anomalous range differences were found and compared them with the CT. We found that the identified regions were mostly in agreement with the morphological changes seen in the CT scan.

Localization of anatomical changes in patients during proton therapy with in-beam PET monitoring: A voxel-based morphometry approach exploiting Monte Carlo simulations.

PURPOSE: In-beam positron emission tomography (PET) is one of the modalities that can be used for in vivo noninvasive treatment monitoring in proton therapy. Although PET monitoring has been frequently applied for this purpose, there is still no straightforward method to translate the information obtained from the PET images into easy-to-interpret information for clinical personnel. The purpose of this work is to propose a statistical method for analyzing in-beam PET monitoring images that can be used to locate, quantify, and visualize regions with possible morphological changes occurring over the course of treatment. METHODS: We selected a patient treated for squamous cell carcinoma (SCC) with proton therapy, to perform multiple Monte Carlo (MC) simulations of the expected PET signal at the start of treatment, and to study how the PET signal may change along the treatment course due to morphological changes. We performed voxel-wise two-tailed statistical tests of the simulated PET images, resembling the voxel-based morphometry (VBM) method commonly used in neuroimaging data analysis, to locate regions with significant morphological changes and to quantify the change. RESULTS: The VBM resembling method has been successfully applied to the simulated in-beam PET images, despite the fact that such images suffer from image artifacts and limited statistics. Three dimensional probability maps were obtained, that allowed to identify interfractional morphological changes and to visualize them superimposed on the computed tomography (CT) scan. In particular, the characteristic color patterns resulting from the two-tailed statistical tests lend themselves to trigger alarms in case of morphological changes along the course of treatment. CONCLUSIONS: The statistical method presented in this work is a promising method to apply to PET monitoring data to reveal interfractional morphological changes in patients, occurring over the course of treatment. Based on simulated in-beam PET treatment monitoring images, we showed that with our method it was possible to correctly identify the regions that changed. Moreover we could quantify the changes, and visualize them superimposed on the CT scan. The proposed method can possibly help clinical personnel in the replanning procedure in adaptive proton therapy treatments.

Poly (γ-glutamic acid)/chitooligo-saccharide/papain hydrogel prevents hypertrophic scar during skin wound healing.

Hypertrophic scar, a common skin disorder typically caused by deep burns or scald were usually treated via surgical resection, laser irradiation, and drugs. However, all the approaches were always companied with complications and devastatingly subjected to relapse, which indicated the urgently need of an effective treatment method. In this project, a new hydrogel composed of Poly (γ-glutamic acid) (γ-PGA), Chitooligo-saccharide, and Papain was developed via crosslinker (EDC&NHS), and characterized with good porously three-dimensional network structure, good water absorption, and mechanical properties. Besides, G/C/P hydrogel facilitated cell adhesion and inhibited excessive proliferation of fibroblasts, which indicated the potential of in vivo application. After applied onto skin wound healing in vivo on a rabbit ear skin wound model, G/C/P hydrogel inhibited excessive collagen deposition and the generation of hyperplastic scars effectively during wound healing. The hydrogel described here provide a new platform for regeneration field and hold great promise for solving serious skin disorder.

Multifunctional Injectable Hydrogel Loaded with Cerium-Containing Bioactive Glass Nanoparticles for Diabetic Wound Healing.

Diabetic foot wound healing is a major clinical problem due to impaired angiogenesis and bacterial infection. Therefore, an effective regenerative dressing is desiderated with the function of promoting revascularization and anti-bacteria. Herein, a multifunctional injectable composite hydrogel was prepared by incorporation of the cerium-containing bioactive glass (Ce-BG) into Gelatin methacryloyl (GelMA) hydrogel. The Ce-BG was synthesized by combining sol-gel method with template method, which maintained spherical shape, chemical structure and phase constitution of bioactive glass (BG). The Ce-BG/GelMA hydrogels had good cytocompatibility, promoted endothelial cells migration and tube formation by releasing Si ion. In vitro antibacterial tests showed that 5 mol % CeO2-containing bioactive glass/GelMA (5/G) composite hydrogel exhibited excellent antibacterial properties. In vivo study demonstrated that the 5/G hydrogel could significantly improve wound healing in diabetic rats by accelerating the formation of granulation tissue, collagen deposition and angiogenesis. All in all, these results indicate that the 5/G hydrogel could enhance diabetic wound healing. Therefore, the development of multifunctional materials with antibacterial and angiogenic functions is of great significance to promote the repair of diabetic wound healing.

Deep Seated Tumour Treatments With Electrons of High Energy Delivered at FLASH Rates: The Example of Prostate Cancer.

Different therapies are adopted for the treatment of deep seated tumours in combination or as an alternative to surgical removal or chemotherapy: radiotherapy with photons (RT), particle therapy (PT) with protons or even heavier ions like 12C, are now available in clinical centres. In addition to these irradiation modalities, the use of Very High Energy Electron (VHEE) beams (100-200 MeV) has been suggested in the past, but the diffusion of that technique was delayed due to the needed space and budget, with respect to standard photon devices. These disadvantages were not paired by an increased therapeutic efficacy, at least when comparing to proton or carbon ion beams. In this contribution we investigate how recent developments in electron beam therapy could reshape the treatments of deep seated tumours. In this respect we carefully explored the application of VHEE beams to the prostate cancer, a well-known and studied example of deep seated tumour currently treated with high efficacy both using RT and PT. The VHEE Treatment Planning System was obtained by means of an accurate Monte Carlo (MC) simulation of the electrons interactions with the patient body. A simple model of the FLASH effect (healthy tissues sparing at ultra-high dose rates), has been introduced and the results have been compared with conventional RT. The study demonstrates that VHEE beams, even in absence of a significant FLASH effect and with a reduced energy range (70-130 MeV) with respect to implementations already explored in literature, could be a good alternative to standard RT, even in the framework of technological developments that are nowadays affordable.

Monitoring Carbon Ion Beams Transverse Position Detecting Charged Secondary Fragments: Results From Patient Treatment Performed at CNAO.

Particle therapy in which deep seated tumours are treated using 12C ions (Carbon Ions RadioTherapy or CIRT) exploits the high conformity in the dose release, the high relative biological effectiveness and low oxygen enhancement ratio of such projectiles. The advantages of CIRT are driving a rapid increase in the number of centres that are trying to implement such technique. To fully profit from the ballistic precision achievable in delivering the dose to the target volume an online range verification system would be needed, but currently missing. The 12C ions beams range could only be monitored by looking at the secondary radiation emitted by the primary beam interaction with the patient tissues and no technical solution capable of the needed precision has been adopted in the clinical centres yet. The detection of charged secondary fragments, mainly protons, emitted by the patient is a promising approach, and is currently being explored in clinical trials at CNAO. Charged particles are easy to detect and can be back-tracked to the emission point with high efficiency in an almost background-free environment. These fragments are the product of projectiles fragmentation, and are hence mainly produced along the beam path inside the patient. This experimental signature can be used to monitor the beam position in the plane orthogonal to its flight direction, providing an online feedback to the beam transverse position monitor chambers used in the clinical centres. This information could be used to cross-check, validate and calibrate, whenever needed, the information provided by the ion chambers already implemented in most clinical centres as beam control detectors. In this paper we study the feasibility of such strategy in the clinical routine, analysing the data collected during the clinical trial performed at the CNAO facility on patients treated using 12C ions and monitored using the Dose Profiler (DP) detector developed within the INSIDE project. On the basis of the data collected monitoring three patients, the technique potential and limitations will be discussed.

Ex-situ treatment of sediment from a black-odor water body using activated sludge.

Sediment containing numerous nutrients and pollutants has become an important consideration when treating black-odor water. Excessive activated sludge produced in wastewater treatment plants contains a large number of microorganisms, which is beneficial for removing organics and nutrients from the black-odor sediment. In this study, three types of sludge from a secondary sedimentation tank (SST), a digestion tank (DT), and an aerobic tank treating landfill leachate (AT_leachate) were used to treat black-odor sediment, respectively. All the three types of activated sludge enhanced the treatment performance of sediment. The SST sludge worked the best with the optimal dosage of 2.56 g/(kg sediment), and the removal of nitrogen and organics reached 57.03 and 28.14%, respectively. Illumina MiSeq sequencing revealed that the activated sludge significantly affected the microbial community of the sediment. In particular, SST sludge resulted in significant increase in the number of microorganisms related to nitrification and sulfur metabolism to 10.68 and 10.97%, respectively. This was found to be important for degrading organics and promoting nitrogen removal. This study provides an efficient strategy for the treatment of black-odor sediment, and also realizes the complete utilization of waste activated sludge.