RESUMO
BACKGROUND: Progressive supranuclear palsy (PSP) is a rare 4R-tauopathy. Transcranial direct current stimulation (tDCS) may improve specific symptoms. OBJECTIVES: This randomized, double-blinded, sham-controlled trial aimed at verifying the short-, mid-, and long-term effect of multiple sessions of anodal tDCS over the left dorsolateral prefrontal cortex (DLPFC) cortex in PSP. METHODS: Twenty-five patients were randomly assigned to active or sham stimulation (2 mA for 20 minute) for 5 days/week for 2 weeks. Participants underwent assessments at baseline, after the 2-week stimulation protocol, then after 45 days and 3 months from baseline. Primary outcomes were verbal and semantic fluency. The efficacy was verified with analysis of covariance. RESULTS: We failed to detect a significant effect of active stimulation on primary outcomes. Stimulation was associated to worsening of specific behavioral complaints. CONCLUSIONS: A 2-week protocol of anodal left DLPFC tDCS is not effective in PSP. Specific challenges in running symptomatic clinical trials with classic design are highlighted. © 2024 International Parkinson and Movement Disorder Society.
Assuntos
Córtex Pré-Frontal , Paralisia Supranuclear Progressiva , Estimulação Transcraniana por Corrente Contínua , Humanos , Paralisia Supranuclear Progressiva/terapia , Paralisia Supranuclear Progressiva/fisiopatologia , Masculino , Feminino , Estimulação Transcraniana por Corrente Contínua/métodos , Idoso , Pessoa de Meia-Idade , Método Duplo-Cego , Córtex Pré-Frontal/fisiopatologia , Resultado do Tratamento , Córtex Pré-Frontal Dorsolateral/fisiologiaRESUMO
The use of wearable sensors for calculating gait parameters has become increasingly popular as an alternative to optoelectronic systems, currently recognized as the gold standard. The objective of the study was to evaluate the agreement between the wearable Opal system and the optoelectronic BTS SMART DX system for assessing spatiotemporal gait parameters. Fifteen subjects with progressive supranuclear palsy walked at their self-selected speed on a straight path, and six spatiotemporal parameters were compared between the two measurement systems. The agreement was carried out through paired data test, Passing Bablok regression, and Bland-Altman Analysis. The results showed a perfect agreement for speed, a very close agreement for cadence and cycle duration, while, in the other cases, Opal system either under- or over-estimated the measurement of the BTS system. Some suggestions about these misalignments are proposed in the paper, considering that Opal system is widely used in the clinical context.
Assuntos
Paralisia Supranuclear Progressiva , Dispositivos Eletrônicos Vestíveis , Humanos , Paralisia Supranuclear Progressiva/diagnóstico , Marcha , CaminhadaRESUMO
Many activities may elicit a biomechanical overload. Among these, lifting loads can cause work-related musculoskeletal disorders. Aspiring to improve risk prevention, the National Institute for Occupational Safety and Health (NIOSH) established a methodology for assessing lifting actions by means of a quantitative method based on intensity, duration, frequency and other geometrical characteristics of lifting. In this paper, we explored the machine learning (ML) feasibility to classify biomechanical risk according to the revised NIOSH lifting equation. Acceleration and angular velocity signals were collected using a wearable sensor during lifting tasks performed by seven subjects and further segmented to extract time-domain features: root mean square, minimum, maximum and standard deviation. The features were fed to several ML algorithms. Interesting results were obtained in terms of evaluation metrics for a binary risk/no-risk classification; specifically, the tree-based algorithms reached accuracies greater than 90% and Area under the Receiver operating curve characteristics curves greater than 0.9. In conclusion, this study indicates the proposed combination of features and algorithms represents a valuable approach to automatically classify work activities in two NIOSH risk groups. These data confirm the potential of this methodology to assess the biomechanical risk to which subjects are exposed during their work activity.
Assuntos
Remoção , Dispositivos Eletrônicos Vestíveis , Fenômenos Biomecânicos , Humanos , Aprendizado de Máquina , National Institute for Occupational Safety and Health, U.S. , Medição de Risco , Estados UnidosRESUMO
SUMMARY: Work-related musculoskeletal disorders are among the main occupational health problems. Substantial evidence has shown that work-related physical risk factors are the main source of low back complaints, particularly affecting heavy and repetitive manual lifting activities. The aim of the study is, during load lifting tasks, to explore the correlation between the time domain features extracted from the acceleration and angular velocity signals of the performing subject and the load lifted, and to explore the feasibility of a multiple linear regression model to predict the lifted load. The acceleration and angular velocity signals were acquired along the three directions of space by means of an inertial sensor placed on the subject's chest, during lifting activities with load gradually increased by 1 kg from 0 kg to 18 kg. Successively three time-domain features (Root Mean Square, Standard Deviation and MinMax value) were extracted from the acquired signals. First a correlation analysis was carried out between each individual feature and the load lifted (calculating r); then the time-domain features that proved most representative (strong correlation) were used to create a multiple linear regression model (calculating R-square). The statistical analysis was carried out by means of the Pearson correlation and multiple linear regression model was fed with the most informative time-domain features according to the correlation analysis. The correlation analysis showed a strong correlation (r > 0,7) between six features (three extracted from z-axes acceleration and three extracted from y-axes angular velocity) and the lifted load. The predictive multiple linear regression model, fed with these six features achieved a Rsquare greater than 0,9.The study demonstrated that the proposed combination of kinematic features and a multiple regression model represents a valid approach to automatically calculate the load lifted based on raw signals obtained by means of an inertial sensor placed on the chest. The results confirm the potential application of this methodology to indirectly monitor the load lifted by workers during their activity.
Assuntos
Doenças Musculoesqueléticas , Saúde Ocupacional , Fenômenos Biomecânicos , Humanos , Remoção , Modelos LinearesRESUMO
This paper presents a new wearable e-textile based system, named SWEET Sock, for biomedical signals remote monitoring. The system includes a textile sensing sock, an electronic unit for data transmission, a custom-made Android application for real-time signal visualization, and a software desktop for advanced digital signal processing. The device allows the acquisition of angular velocities of the lower limbs and plantar pressure signals, which are postprocessed to have a complete and schematic overview of patient's clinical status, regarding gait and postural assessment. In this work, device performances are validated by evaluating the agreement between the prototype and an optoelectronic system for gait analysis on a set of free walk acquisitions. Results show good agreement between the systems in the assessment of gait cycle time and cadence, while the presence of systematic and proportional errors are pointed out for swing and stance time parameters. Worse results were obtained in the comparison of spatial metrics. The "wearability" of the system and its comfortable use make it suitable to be used in domestic environment for the continuous remote health monitoring of de-hospitalized patients but also in the ergonomic assessment of health workers, thanks to its low invasiveness.
Assuntos
Vestuário , Análise da Marcha , Postura , Têxteis , Dispositivos Eletrônicos Vestíveis , Humanos , CaminhadaRESUMO
Occupational ergonomics aims to optimize the work environment and to enhance both productivity and worker well-being. Work-related exposure assessment, such as lifting loads, is a crucial aspect of this discipline, as it involves the evaluation of physical stressors and their impact on workers' health and safety, in order to prevent the development of musculoskeletal pathologies. In this study, we explore the feasibility of machine learning (ML) algorithms, fed with time- and frequency-domain features extracted from inertial signals (linear acceleration and angular velocity), to automatically and accurately discriminate safe and unsafe postures during weight lifting tasks. The signals were acquired by means of one inertial measurement unit (IMU) placed on the sternums of 15 subjects, and subsequently segmented to extract several time- and frequency-domain features. A supervised dataset, including the extracted features, was used to feed several ML models and to assess their prediction power. Interesting results in terms of evaluation metrics for a binary safe/unsafe posture classification were obtained with the logistic regression algorithm, which outperformed the others, with accuracy and area under the receiver operating characteristic curve values of up to 96% and 99%, respectively. This result indicates the feasibility of the proposed methodology-based on a single inertial sensor and artificial intelligence-to discriminate safe/unsafe postures associated with load lifting activities. Future investigation in a wider study population and using additional lifting scenarios could confirm the potentiality of the proposed methodology, supporting its applicability in the occupational ergonomics field.
RESUMO
BACKGROUND AND OBJECTIVE: Mechanistic-based Model simulations (MM) are an effective approach commonly employed, for research and learning purposes, to better investigate and understand the inherent behavior of biological systems. Recent advancements in modern technologies and the large availability of omics data allowed the application of Machine Learning (ML) techniques to different research fields, including systems biology. However, the availability of information regarding the analyzed biological context, sufficient experimental data, as well as the degree of computational complexity, represent some of the issues that both MMs and ML techniques could present individually. For this reason, recently, several studies suggest overcoming or significantly reducing these drawbacks by combining the above-mentioned two methods. In the wake of the growing interest in this hybrid analysis approach, with the present review, we want to systematically investigate the studies available in the scientific literature in which both MMs and ML have been combined to explain biological processes at genomics, proteomics, and metabolomics levels, or the behavior of entire cellular populations. METHODS: Elsevier Scopus®, Clarivate Web of Science™ and National Library of Medicine PubMed® databases were enquired using the queries reported in Table 1, resulting in 350 scientific articles. RESULTS: Only 14 of the 350 documents returned by the comprehensive search conducted on the three major online databases met our search criteria, i.e. present a hybrid approach consisting of the synergistic combination of MMs and ML to treat a particular aspect of systems biology. CONCLUSIONS: Despite the recent interest in this methodology, from a careful analysis of the selected papers, it emerged how examples of integration between MMs and ML are already present in systems biology, highlighting the great potential of this hybrid approach to both at micro and macro biological scales.
Assuntos
Aprendizado de Máquina , Humanos , Biologia de Sistemas/métodos , Genômica , MetabolômicaRESUMO
The recovery of independent gait represents one of the main functional goals of the rehabilitative interventions after stroke but it can be hindered by the presence of unilateral spatial neglect (USN). The aim of the paper is to study if the presence of USN in stroke patients affects lower limb gait parameters between the two body sides, differently from what could be expected by the motor impairment alone, and to explore whether USN is associated to specific gait asymmetry. Thirty-five stroke patients (right or left lesion and ischemic or hemorrhagic etiology) who regained independent gait were assessed for global cognitive functioning and USN. All patients underwent a gait analysis session by using a wearable inertial system, kinematic parameters were computed. Enrolled patients presented altered motion parameters. Stroke patients with USN showed specific asymmetries in the following parameters: stance phase, swing phase, and knee range of motion. No differences in the clinical scores were found as the presence of USN. The presence of USN was associated with a specific form of altered gait symmetry. These findings may help clinicians to develop more tailored rehabilitative training to enhance gait efficacy of patients with motor defects complicated by the presence of selected cognitive impairments. Overview of the experiment setup. The workflow shows: diagnosis of unilateral spatial neglect by the neuropsychologist, sensors placement, gait analysis protocol and evaluation of the gait asymmetry together with the statistically significant features.
Assuntos
Disfunção Cognitiva , Transtornos da Percepção , Reabilitação do Acidente Vascular Cerebral , Acidente Vascular Cerebral , Humanos , Acidente Vascular Cerebral/complicações , Transtornos da Percepção/etiologia , Transtornos da Percepção/psicologia , MarchaRESUMO
Manual material handling and load lifting are activities that can cause work-related musculoskeletal disorders. For this reason, the National Institute for Occupational Safety and Health proposed an equation depending on the following parameters: intensity, duration, frequency, and geometric characteristics associated with the load lifting. In this paper, we explore the feasibility of several Machine Learning (ML) algorithms, fed with frequency-domain features extracted from electromyographic (EMG) signals of back muscles, to discriminate biomechanical risk classes defined by the Revised NIOSH Lifting Equation. The EMG signals of the multifidus and erector spinae muscles were acquired by means of a wearable device for surface EMG and then segmented to extract several frequency-domain features relating to the Total Power Spectrum of the EMG signal. These features were fed to several ML algorithms to assess their prediction power. The ML algorithms produced interesting results in the classification task, with the Support Vector Machine algorithm outperforming the others with accuracy and Area under the Receiver Operating Characteristic Curve values of up to 0.985. Moreover, a correlation between muscular fatigue and risky lifting activities was found. These results showed the feasibility of the proposed methodology-based on wearable sensors and artificial intelligence-to predict the biomechanical risk associated with load lifting. A future investigation on an enriched study population and additional lifting scenarios could confirm the potential of the proposed methodology and its applicability in the field of occupational ergonomics.
RESUMO
Mathematical models can improve the understanding of physiological systems behaviour, which is a fundamental topic in the bioengineering field. Having a reliable model enables researchers to carry out in silico experiments, which require less time and resources compared to their in vivo and in vitro counterparts. This work's objective is to capture the characteristics that a nonlinear dynamical mathematical model should exhibit, in order to describe physiological control systems at different scales. The similarities among various negative feedback physiological systems have been investigated and a unique general framework to describe them has been proposed. Within such a framework, both the existence and stability of equilibrium points are investigated. The model here introduced is based on a closed-loop topology, on which the homeostatic process is based. Finally, to validate the model, three paradigmatic examples of physiological control systems are illustrated and discussed: the ultrasensitivity mechanism for achieving homeostasis in biomolecular circuits, the blood glucose regulation, and the neuromuscular reflex arc (also referred to as muscle stretch reflex). The results show that, by a suitable choice of the modelling functions, the dynamic evolution of the systems under study can be described through the proposed general nonlinear model. Furthermore, the analysis of the equilibrium points and dynamics of the above-mentioned systems are consistent with the literature.
RESUMO
While in the literature there is much interest in investigating lower limbs gait of patients affected by neurological diseases, such as Parkinson's Disease (PD), fewer publications involving upper limbs movements are available. In previous studies, 24 motion signals (the so-called reaching tasks) of the upper limbs of PD patients and Healthy Controls (HCs) were used to extract several kinematic features through a custom-made software; conversely, the aim of our paper is to investigate the possibility to build models - using these features - for distinguishing PD patients from HCs. First, a binary logistic regression and, then, a Machine Learning (ML) analysis was performed by implementing five algorithms through the Knime Analytics Platform. The ML analysis was performed twice: first, a leave-one out-cross validation was applied; then, a wrapper feature selection method was implemented to identify the best subset of features that could maximize the accuracy. The binary logistic regression achieved an accuracy of 90.5%, demonstrating the importance of the maximum jerk during subjects upper limb motion; the Hosmer-Lemeshow test supported the validity of this model (p-value=0.408). The first ML analysis achieved high evaluation metrics by overcoming 95% of accuracy; the second ML analysis achieved a perfect classification with 100% of both accuracy and area under the curve receiver operating characteristics. The top-five features in terms of importance were the maximum acceleration, smoothness, duration, maximum jerk and kurtosis. The investigation carried out in our work has proved the predictive power of the features, extracted from the reaching tasks involving the upper limbs, to distinguish HCs and PD patients.
RESUMO
Physical ergonomics has established itself as a valid strategy for monitoring potential disorders related, for example, to working activities. Recently, in the field of physical ergonomics, several studies have also shown potential for improvement in experimental methods of ergonomic analysis, through the combined use of artificial intelligence, and wearable sensors. In this regard, this review intends to provide a first account of the investigations carried out using these combined methods, considering the period up to 2021. The method that combines the information obtained on the worker through physical sensors (IMU, accelerometer, gyroscope, etc.) or biopotential sensors (EMG, EEG, EKG/ECG), with the analysis through artificial intelligence systems (machine learning or deep learning), offers interesting perspectives from both diagnostic, prognostic, and preventive points of view. In particular, the signals, obtained from wearable sensors for the recognition and categorization of the postural and biomechanical load of the worker, can be processed to formulate interesting algorithms for applications in the preventive field (especially with respect to musculoskeletal disorders), and with high statistical power. For Ergonomics, but also for Occupational Medicine, these applications improve the knowledge of the limits of the human organism, helping in the definition of sustainability thresholds, and in the ergonomic design of environments, tools, and work organization. The growth prospects for this research area are the refinement of the procedures for the detection and processing of signals; the expansion of the study to assisted working methods (assistive robots, exoskeletons), and to categories of workers suffering from pathologies or disabilities; as well as the development of risk assessment systems that exceed those currently used in ergonomics in precision and agility.
RESUMO
Lifting is one of the most potentially harmful activities for work-related musculoskeletal disorders (WMSDs), due to exposure to biomechanical risk. Risk assessment for work activities that involve lifting loads can be performed through the NIOSH (National Institute of Occupational Safety and Health) method, and specifically the Revised NIOSH Lifting Equation (RNLE). Aim of this work is to explore the feasibility of a logistic regression model fed with time and frequency domains features extracted from signals acquired through one inertial measurement unit (IMU) to classify risk classes associated with lifting activities according to the RNLE. Furthermore, an attempt was made to evaluate which are the most discriminating features relating to the risk classes, and to understand which inertial signals and which axis were the most representative. In a simplified scenario, where only two RNLE variables were altered during lifting tasks performed by 14 healthy adults, inertial signals (linear acceleration and angular velocity) acquired using one IMU placed on the subject's sternum during repeated rhythmic lifting tasks were automatically segmented to extract several features in the time and frequency domains. The logistic regression model fed with significant features showed good results to discriminate "risk" and "no risk" NIOSH classes with an accuracy, sensitivity and specificity equal to 82.8%, 84.8% and 80.9%, respectively. This preliminary work indicated that a logistic regression model-fed with specific inertial features extracted by signals acquired using a single IMU sensor placed on the sternum-is able to discriminate risk classes according to the RNLE in a simplified context, and therefore could be a valid tool to assess the biomechanical risk in an automatic way also in more complex conditions (e.g., real working scenarios).
RESUMO
Background: Mild cognitive impairment (MCI) is frequent in Parkinson's disease (PD) and represents a risk factor for the development of dementia associated with PD (PDD). Since PDD has been associated with disability, caregiver burden, and an increase in health-related costs, early detection of MCI associated with PD (PD-MCI) and its biomarkers is crucial. Objective: Given that gait is considered a surrogate marker for cognitive decline in PD, the aim of this study was to compare gait patterns in PD-MCI subtypes in order to verify the existence of an association between specific gait features and particular MCI subtypes. Methods: A total of 67 patients with PD were consecutively enrolled and assessed by an extensive clinical and cognitive examination. Based on the neuropsychological examination, patients were diagnosed as patients with MCI (PD-MCI) and without MCI (no-PD-MCI) and categorized in MCI subtypes. All patients were evaluated using a motion capture system of a BTS Bioengineering equipped with six IR digital cameras. Gait of the patients was assessed in the ON-state under three different tasks (a single task and two dual tasks). Statistical analysis included the t-test, the Kruskal-Wallis test with post hoc analysis, and the exploratory correlation analysis. Results: Gait pattern was poorer in PD-MCI vs. no-PD-MCI in all tasks. Among PD-MCI subtypes, multiple-domain PD-MCI and amnestic PD-MCI were coupled with worse gait patterns, notably in the dual task. Conclusion: Both the magnitude of cognitive impairment and the presence of memory dysfunction are associated with increased measures of dynamic unbalance, especially in dual-task conditions, likely mirroring the progressive involvement of posterior cortical networks.
RESUMO
Current diagnosis of concussion relies on self-reported symptoms and medical records rather than objective biomarkers. This work uses a novel measurement setup called BioVRSea to quantify concussion status. The paradigm is based on brain and muscle signals (EEG, EMG), heart rate and center of pressure (CoP) measurements during a postural control task triggered by a moving platform and a virtual reality environment. Measurements were performed on 54 professional athletes who self-reported their history of concussion or non-concussion. Both groups completed a concussion symptom scale (SCAT5) before the measurement. We analyzed biosignals and CoP parameters before and after the platform movements, to compare the net response of individual postural control. The results showed that BioVRSea discriminated between the concussion and non-concussion groups. Particularly, EEG power spectral density in delta and theta bands showed significant changes in the concussion group and right soleus median frequency from the EMG signal differentiated concussed individuals with balance problems from the other groups. Anterior-posterior CoP frequency-based parameters discriminated concussed individuals with balance problems. Finally, we used machine learning to classify concussion and non-concussion, demonstrating that combining SCAT5 and BioVRSea parameters gives an accuracy up to 95.5%. This study is a step towards quantitative assessment of concussion.
Assuntos
Traumatismos em Atletas , Concussão Encefálica , Realidade Virtual , Atletas , Biomarcadores , Concussão Encefálica/diagnóstico , HumanosRESUMO
The use of e-textile technologies spread out in the scientific research with several applications in both medical and nonmedical world. In particular, wearable technologies and miniature electronics devices were implemented and tested for medical research purposes. In this paper, a systematic review regarding the use of e-textile for clinical applications was conducted: the Scopus and Pubmed databases were investigate by considering research studies from 2010 to 2020. Overall, 262 papers were found, and 71 of them were included in the systematic review. Of the included studies, 63.4% focused on information and communication technology studies, while the other 36.6% focused on industrial bioengineering applications. Overall, 56.3% of the research was published as an article, while the remainder were conference papers. Papers included in the review were grouped by main aim into cardiological, muscular, physical medicine and orthopaedic, respiratory, and miscellaneous applications. The systematic review showed that there are several types of applications regarding e-textile in medicine and several devices were implemented as well; nevertheless, there is still a lack of validation studies on larger cohorts of subjects since the majority of the research only focuses on developing and testing the new device without considering a further extended validation.
RESUMO
Parkinson's disease is the second most common neurodegenerative disorder in the world. Assumed that gait dysfunctions represent a major motor symptom for the pathology, gait analysis can provide clinicians quantitative information about the rehabilitation outcome of patients. In this scenario, wearable inertial systems for gait analysis can be a valid tool to assess the functional recovery of patients in an automatic and quantitative way, helping clinicians in decision making. Aim of the study is to evaluate the impact of the short-term rehabilitation on gait and balance of patients with Parkinson's disease. A cohort of 12 patients with Idiopathic Parkinson's disease performed a gait analysis session instrumented by a wearable inertial system for gait analysis: Opal System, by APDM Inc., with spatial and temporal parameters being analyzed through a statistic and machine learning approach. Six out of fourteen motion parameters exhibited a statistically significant difference between the measurements at admission and at discharge of the patients, while the machine learning analysis confirmed the separability of the two phases in terms of Accuracy and Area under the Receiving Operating Characteristic Curve. The rehabilitation treatment especially improved the motion parameters related to the gait. The study shows the positive impact on the gait of a short-term rehabilitation in patients with Parkinson's disease and the feasibility of the wearable inertial devices, that are increasingly spreading in clinical practice, to quantitatively assess the gait improvement.
Assuntos
Doença de Parkinson , Dispositivos Eletrônicos Vestíveis , Marcha , Análise da Marcha , Humanos , Aprendizado de Máquina , Doença de Parkinson/complicaçõesRESUMO
Heart-rate variability has proved a valid tool in prognosis definition of patients with congestive heart failure (CHF). Previous research has documented Poincaré plot analysis as a valuable approach to study heart-rate variability performance among different subjects. In this paper, we explored the possibility to feed machine-learning (ML) algorithms using unconventional quantitative parameters extracted from Poincaré plots (generated from 24-h electrocardiogram recordings) to classify patients with CHF belonging to different New York Heart Association (NYHA) classes. We performed in sequence the following investigations: first, a statistical analysis was carried out on 9 morphological parameters, automatically measured from Poincaré plots. Subsequently, a feature selection through a wrapper with a 10-fold cross-validation method was performed to find the best subset of features which maximized the classification accuracy for each considered ML algorithm. Finally, patient classification was assessed through a ML analysis using AdaBoost of Decision Tree, k-Nearest Neighbors and Naive Bayes algorithms. A univariate statistical analysis proved 5 out of 9 parameters presented statistically significant differences among patients of distinct NYHA classes; similarly, a multivariate logistic regression confirmed the importance of the parameter ρy in the separability between low-risk and high-risk classes. The ML analysis achieved promising results in terms of evaluation metrics (especially the Naive Bayes algorithm), with accuracies greater than 80% and Area Under the Receiver Operating Curve indices greater than 0.7 for the overall three algorithms. The study indicates the proposed features have a predictive power to discriminate the NYHA classes, to which the features seem evenly correlated. Despite the NYHA classification being subjective and easily recognized by cardiologists, the potential relevance in the clinical cardiology of the proposed features and the promising ML results implies the methodology could be a valuable approach to automatically classify CHF. Future investigations on enriched datasets may further confirm the presented evidence.
RESUMO
Although prostate cancer is one of the most common causes of mortality and morbidity in advancing-age males, early diagnosis improves prognosis and modifies the therapy of choice. The aim of this study was the evaluation of a combined radiomics and machine learning approach on a publicly available dataset in order to distinguish a clinically significant from a clinically non-significant prostate lesion. A total of 299 prostate lesions were included in the analysis. A univariate statistical analysis was performed to prove the goodness of the 60 extracted radiomic features in distinguishing prostate lesions. Then, a 10-fold cross-validation was used to train and test some models and the evaluation metrics were calculated; finally, a hold-out was performed and a wrapper feature selection was applied. The employed algorithms were Naïve bayes, K nearest neighbour and some tree-based ones. The tree-based algorithms achieved the highest evaluation metrics, with accuracies over 80%, and area-under-the-curve receiver-operating characteristics below 0.80. Combined machine learning algorithms and radiomics based on clinical, routine, multiparametric, magnetic-resonance imaging were demonstrated to be a useful tool in prostate cancer stratification.
RESUMO
BACKGROUND: Parkinson's disease is the second most frequent neurodegenerative disorder. Its diagnosis is challenging and mainly relies on clinical aspects. At present, no biomarker is available to obtain a diagnosis of certainty in vivo. OBJECTIVE: The present review aims at describing machine learning algorithms as they have been variably applied to different aspects of Parkinson's disease diagnosis and characterization. METHODS: A systematic search was conducted on PubMed in December 2019, resulting in 230 publications obtained with the following search query: "Machine Learning" "AND" "Parkinson Disease". RESULTS: The obtained publications were divided into 6 categories, based on different application fields: "Gait Analysis - Motor Evaluation", "Upper Limb Motor and Tremor Evaluation", "Handwriting and typing evaluation", "Speech and Phonation evaluation", "Neuroimaging and Nuclear Medicine evaluation", "Metabolomics application", after excluding the papers of general topic. As a result, a total of 166 articles were analyzed after elimination of papers written in languages other than English or not directly related to the selected topics. CONCLUSION: Machine learning algorithms are computer-based statistical approaches that can be trained and are able to find common patterns from big amounts of data. The machine learning approaches can help clinicians in classifying patients according to several variables at the same time.