RESUMO
Despite the great research interest in two-dimensional metal nanowire networks (2D MNWNs) due to their large specific surface area and abundance of unsaturated coordination atoms, their controllable synthesis still remains a significant challenge. Herein, a microfluidics laminar flow-based approach is developed, enabling the facile preparation of large-scale 2D structures with diverse alloy compositions, such as PtBi, AuBi, PdBi, PtPdBi, and PtAuCu alloys. Remarkably, these 2D MNWNs can reach sizes up to submillimeter scale (~220â µm), which is significantly larger than the evolution from the 1D or 3D counterparts that typically measure only tens of nanometers. The PdBi 2D MNWNs affords the highest specific activity for formic acid (2669.1â mA mg-1) among current unsupported catalysts, which is 103.5 times higher than Pt-black, respectively. Furthermore, in situ Fourier transform infrared (FTIR) experiments provide comprehensive evidence that PdBi 2D MNWNs catalysts can effectively prevent CO* poisoning, resulting in exceptional activity and stability for the oxidation of formic acid.
RESUMO
Nitric oxide (NO), as a vital signaling molecule related to different physiological and pathological processes in living systems, is closely associated with cancer and cardiovascular disease. However, the detection of NO in real-time remains a difficulty. Here, PtBi alloy nanoparticles (NPs) were synthesized, dealloyed, and then fabricated to NP-based electrodes for the electrochemical detection of NO. Transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and nitrogen physical adsorption/desorption show that dealloyed PtBi alloy nanoparticles (dPtBi NPs) have a porous nanostructure. Electrochemical impedance spectroscopy and cyclic voltammetry results exhibit that the dPtBi NP electrode possesses unique electrocatalytic features such as low charge transfer resistance and large electrochemically active surface area, which lead to its excellent NO electrochemical sensing performance. Owing to the higher density of catalytical active sites formed PtBi bimetallic interface, the dPtBi NP electrode displays superior electrocatalytic activity toward the oxidation of NO with a peak potential at 0.74 V vs. SCE. The dPtBi NP electrode shows a wide dynamic range (0.09-31.5 µM) and a low detection limit of 1 nM (3σ/k) as well as high sensitivity (130 and 36.5 µA µM-1 cm-2). Moreover, the developed dPtBi NP-based electrochemical sensor also exhibited good reproducibility (RSD 5.7%) and repeatability (RSD 3.4%). The electrochemical sensor was successfully used for the sensitive detection of NO produced by live cells. This study indicates a highly effective approach for regulating the composition and nanostructures of metal alloy nanomaterials, which might provide new technical insights for developing high-performance NO-sensitive systems, and have important implications in enabling real-time detection of NO produced by live cells.
Assuntos
Nanopartículas , Óxido Nítrico , Reprodutibilidade dos Testes , Espalhamento a Baixo Ângulo , Difração de Raios X , LigasRESUMO
Gas-solid phase reactions between ozone (O3) and three representative solids (alcohols, phenols, and saccharides) were investigated through a heterogeneous chemiluminescence (CL) strategy. When interactions between these two species occurred at the surface of the solid powder, an obvious CL effect was obtained. This performance could be attributed to the evolution of a ROOOH intermediate, which subsequently released emissive 1O2 species. This is the first report analyzing the gas-solid phase CL performance of O3 with alcohols, phenols, and saccharides. It is believed that this strategy can be extended to applications in other gas-solid phase CL analyses utilizing the O3 system. This has also created a novel area of gas-solid CL performance; thus, relevant processes and mechanisms can be deduced and identified.
Assuntos
Luminescência , Álcoois , Ozônio , FenóisRESUMO
Introduction: Tumor vaccines that induce robust humoral and cellular immune responses have attracted tremendous interest for cancer immunotherapy. Despite the tremendous potential of tumor vaccines as an effective approach for cancer treatment and prevention, a major challenge in achieving sustained antitumor immunity is inefficient antigen delivery to secondary lymphoid organs, even with adjuvant aid. Methods: Herein, we present antigen/adjuvant integrated nanocomplexes termed nsGO/PCP/OVA by employing graphene oxide nanosheet (nsGO) as antigen nanocarriers loaded with model antigen ovalbumin (OVA) and adjuvant, Poria cocos polysaccharides (PCP). We evaluated the efficacy of nsGO/PCP/OVA in activating antigen-specific humoral as well as cellular immune responses and consequent tumor prevention and rejection in vivo. Results: The optimally formed nsGO/PCP/OVA was approximately 120-150 nm in diameter with a uniform size distribution. Nanoparticles can be effectively engulfed by dendritic cells (DCs) through receptor-mediated endocytosis, induced the maturation of DCs and improved the delivery efficiency both in vitro and in vivo. The nsGO/PCP/OVA nanoparticles also induced a significant enhancement of OVA antigen-specific Th1 and Th2 immune responses in vivo. In addition, vaccination with nsGO/PCP/OVA not only significantly suppressed tumor growth in prophylactic treatments, but also achieved a therapeutic effect in inhibiting the growth of already-established tumors. Conclusion: Therefore, this potent nanovaccine platform with nanocarrier nsGO and PCP as adjuvants provides a promising strategy for boosting anti-tumor immunity for cancer immunotherapy.
RESUMO
The fabrication of effective microchip liquid chromatography (LC) systems tends to be limited by the availability of suitable chromatographic columns. Herein, we developed a glass microchip LC system in which porous single-particle silica was adopted as frits and a freeze-thaw valve was utilized to achieve sample injection without interfering with sampling. The fabrication of single-particle-frit-based packed columns did not require an additional packing channel, thus avoiding dead volumes within the channel interface that can influence chromatographic separation. Further, the length of the packed column could be adjusted using the location of single-particle frits within the column channel. The fabricated frits exhibited high mechanical strength, good permeability, and tolerance for high pressures during chromatographic separation. In particular, the developed microchip LC system was able to withstand high separation pressures of more than 5000 psi. The microchip LC system was applied to the separation of neurotransmitters. Three different monoamine neurotransmitters were completely separated within 5 min with theoretical plate numbers on the order of 100,000 plates m-1. The microchip LC system has a potential for application in a variety of fields including environmental analysis, food safety, drug analysis, and biomedicine.
Assuntos
Análise em Microsséries , Neurotransmissores/análise , Cromatografia Líquida/instrumentação , Voluntários Saudáveis , Humanos , Tamanho da Partícula , Porosidade , Propriedades de SuperfícieRESUMO
Microfluidic synthesis has attracted extensive attention due to the ability for the multistep precise control of the synthesis parameters, continuous and reproducible preparation, and its ease of integration. However, its commercial application is still affected by its low production efficiency. In this case, we report a high-throughput continuous flow synthesis of highly dispersed PtFeCu/C nanocatalysts using a metal microchip setup with four parallel channels. The high flow rate and integrated channels enabled improving the throughput, whereby 1.33 g h-1 of catalysts could be achieved with the flow rate of 1200 mL h-1 under the experimental conditions. The as-prepared PtFeCu/C exhibited excellent performance, 1.94 times higher than Pt/C for methanol oxidation. More importantly, the yield of the PtFeCu/C nanocatalysts could be further increased through designing numerous parallel channels, which might provide a promising approach for large-scale commercialization of the catalysts. Such a high-throughput fabrication pathway is significant for the large-scale industrial production of nanomaterials.
RESUMO
The nitrogen doped carbon dots (N-CDs) produces strong chemiluminescence (CL)-emission due to hydroxyl radical (â¢OH) induced electron-hole transition in N-CDs. The Fe2+ has the ability to generate â¢OH from available hydrogen peroxide (H2O2). Therefore, a pre-mixed N-CDs/H2O2 solution was utilized for selective quantification of Fe2+ in solution via CL-emission. A linear increase in the CL-emission intensity was observed within increase in Fe2+ concentration. The N-CDs/H2O2 system enabled the detection of Fe2+ up to lower concentration of 0.2â¯×â¯10-9 M with a linear dynamic range of 1.0â¯×â¯10-9-1.0â¯×â¯10-6 M. Significantly, no CL-emission was observed when other divalent cations, Al3+, Fe3+, or Cr3+ were injected to this system. Moreover, no interference was observed when a mixed solution of Fe2+ and other cations were introduced to N-CDs/H2O2. The practical evaluation of N-CDs/H2O2 system was demonstrated for detection of Fe2+ in tap, lotus pond, and canal water samples. The easy detection, high sensitivity, and selectivity make this method a significant tool for analysis of Fe2+ in solution.
RESUMO
The hitherto unknown influence of 1,10-phenonthroline (1,10-phen) and its derivatives on the weak chemiluminescence (CL) of periodate-peroxide has been investigated, and a novel method for CL catalysis is described. Herein, we have deconvoluted the variation in CL intensity arising from the addition of various derivatives of 1,10-phen. Interestingly, similar derivatives of 1,10-phen show interesting differences in their reactivity toward CL. Electron-withdrawing substituents on 1,10-phen boosted the CL signals, indicating a negative charge buildup on 1,10-phen in the rate-determining step. The 1,10-phen derivatives having substitution at the C5=C6 position resulted in no CL signals due to the blockage of the reactive site. Mechanistic investigations are interpreted in terms of free radical (H2O2 reaction), followed by the oxygen atom transfer via an electrophilic attack of IO4 - (IO4 - reaction) on 1,10-phen resulting in dioxetane with enhanced CL emission. Additionally, the relationship between electronic structures and photophysical properties was investigated using density functional theory. Our results are expected to open up promising application of 1,10-phen as a molecular catalyst, providing a new strategy for metal-free catalytic CL enhancement reaction. We believe that this would foster in gleaning more detailed information on the nature of these reactions, thereby leading to a deeper understanding of the CL mechanism.
RESUMO
Reactive oxygen species (ROS) generation is of intense interest because of its crucial role in many fields. Here we demonstrate that MoS2-QDs exhibit a promising capability for the generation of reactive oxygen species, which leads to enhanced chemiluminescence. We discovered that the unique performance is due to hydroxyl radical activation increasing the active catalytic sites on molybdenum sulphide quantum dots (MoS2-QDs). The reactive oxygen species, such as hydroxyl radicals (ËOH), superoxide radicals (ËO2 -) and singlet oxygen (1O2) have been efficiently generated from H2O2 solution in alkaline conditions. In particular, the maximum ËOH yield was enhanced significantly (9.18 times) compared to the Fe(ii)/H2O2 Fenton system under neutral conditions. These findings not only enrich our understanding of the fascinating performance of MoS2 QDs, but also provide a new pathway for ROS generation in all kinds of pH environment.
RESUMO
Fluorescent carbon nanoparticles (FCNs), as novel luminescent reagents exhibiting hydrogen peroxide mimicking properties, can directly react with luminol, NaHCO3 and NaHSO3 in alkaline conditions to yield novel chemiluminescence, and show great potential towards further applications of ultra-weak chemiluminescence.
RESUMO
In this work, a novel chemiluminescence (CL) phenomenon was found: a g-C3N4 nanosheets suspension was mixed with NaHSO3 solution directly to produce luminescence, and the intensity of luminescence could be obviously enhanced by some metal ions, which was distinctly different from the phenomenon that Cu(2+) ions can quench the fluorescence of g-C3N4 nanosheets as reported before.
RESUMO
In this work, chemiluminescence (CL) from peroxynitrous acid (ONOOH)-carbonate system greatly amplified by carbon dots was observed. The CL mechanism of the ONOOH-carbonate-carbon dots system has been investigated and the results reveal that the carbon dots could serve as the energy acceptor, which gives us new insight into the optical properties of the new emerging carbon nanomaterial. There is a good linear relationship between the CL signal and the concentration of the nitrite using for ONOOH formation, which provides us a nitrite sensing method with sensitivity as high as 5.0×10(-9) M (S/N=3). The method has been successfully applied to the determination of nitrite in tap water with the recovery of 98%. The standard deviations are within 2.5%.
Assuntos
Carbonatos/química , Água Potável/química , Nitritos/análise , Ácido Peroxinitroso/química , Pontos Quânticos/química , Poluentes Químicos da Água/análise , Análise de Injeção de Fluxo/métodos , Humanos , Luminescência , Medições LuminescentesRESUMO
In this communication, a novel chemiluminescence phenomenon was observed for the as-prepared carbon nanodots (CDs) in a concentrated sodium hydroxide (NaOH) solution. The generation of superoxide anion radical (O2Ë(-)) directly provides evidence for the excellent electron-donating ability of CDs.