Stereotactic radiotherapy for managing ovarian cancer oligoprogression under poly (ADP-ribose) polymerase inhibitors (PARPi).

OBJECTIVE: Poly (ADP-ribose) polymerase inhibitors (PARPi) have become a new standard of care for the maintenance treatment of advanced epithelial ovarian cancer. This study aims to evaluate the efficacy and safety of combining stereotactic body radiotherapy with PARPi continuation as a strategy to treat ovarian cancer oligoprogression on PARPi. METHODS: This is a multicenter retrospective study including ovarian cancer patients treated with stereotactic body radiotherapy and PARPi continuation for oligoprogression under PARPi maintenance therapy between June 2012 and May 2023 in three Italian centers. PARPi treatment was continued until further disease progression or unacceptable toxicity. The primary endpoint was the next-line systemic therapy-free interval. The Kaplan-Meier method was used to assess local control, progression-free survival, and overall survival. Univariate and multivariate Cox regression analyses were performed to evaluate potential clinical outcomes predictors. RESULTS: 46 patients were included, with a total of 89 lesions treated over 63 radiotherapy treatments. Lymph nodes were the most frequently treated lesions (80, 89.9%), followed by visceral lesions (8, 9%) and one case with a bone lesion (1.1%). Median follow-up was 25.9 months (range 2.8-122). The median next-line systemic therapy-free interval was 12.4 months (95% CI 8.3 to 19.5). A number of prior chemotherapy lines greater than five was significantly associated with a reduced next-line systemic therapy-free interval (HR 3.21, 95% CI 1.11 to 9.32, p=0.032). At the time of analysis, 32 (69.6%) patients started a new systemic therapy regimen, while 14 (30.4%) remained on the PARPi regimen. The 2-year progression-free survival, local failure-free survival, and overall survival rates were 10.7%, 78.1%, and 76.5%, respectively. Four patients (8.7%) experienced acute toxicity with G1 gastrointestinal events. CONCLUSION: Stereotactic body radiotherapy combined with PARPi continuation may be an effective and safe strategy for managing ovarian cancer patients with oligoprogression on PARPi maintenance therapy. Prospective research is warranted to shed more light on this approach.

Post-operative KEloids iRradiation (POKER): does the surgery/high-dose interventional radiotherapy association make a winning hand?

PURPOSE: To report the results involving post-operative interventional radiotherapy (POIRT) in a homogenous cohort of patients affected by keloid and treated at a single institution with the same fractionation schedule. PATIENTS AND METHODS: Inclusion criteria were: surgery with a histopathological diagnosis of keloid, subsequent high-dose rate interventional radiotherapy (HDR-IRT)-12 Gy in 4 fractions (3 Gy/fr) twice a day-and follow-up period ≥ 24 months. RESULTS: One-hundred and two patients and a total of 135 keloids were eligible for the analyses. Median follow-up was 64 [IQR: 25-103] months. Thirty-six (26.7%) recurrences were observed, 12-months and 36-months cumulative incidence of recurrence were 20.7% (95% CI 12.2-28.5) and 23.8% (95% CI 14.9-31.7) respectively. History of spontaneous keloids (HR = 7.00, 95% CI 2.79-17.6, p < 0.001), spontaneous cheloid as keloid cause (HR = 6.97, 95% CI 2.05-23.7, p = 0.002) and sternal (HR = 10.6, 95% CI 3.08-36.8, p < 0.001), ear (HR = 6.03, 95% CI 1.71-21.3, p = 0.005) or limb (HR = 18.8, 95% CI 5.14-68.7, p < 0.001) keloid sites were significantly associated to a higher risk of recurrence. CONCLUSIONS: The findings support the use of surgery and POIRT as an effective strategy for controlling keloid relapses. Further studies should focus on determining the optimal Biologically Effective Dose and on establishing a scoring system for patient selection.

Comparability of skeletal fibulae surfaces generated by different source scanning (dual-energy CT scan vs. high resolution laser scanning) and 3D geometric morphometric validation.

This work aims to test accuracy and comparability of 3D models of human skeletal fibulae generated by clinical CT and laser scanner virtual acquisitions. Mesh topology, segmentation and smoothing protocols were tested to assess variation among meshes generated with different scanning methods and procedures, and to evaluate meshes-interchangeability in 3D geometric morphometric analysis. A sample of 13 left human fibulae were scanned separately with Revolution Discovery CT dual energy (0.625 mm resolution) and ARTEC Space Spider 3D structured light laser scanner (0.1 mm resolution). Different segmentation methods, including half-maximum height (HMH) and MIA-clustering protocols, were compared to their high-resolution standard generated with laser-scanner by calculating topological surface deviations. Different smoothing algorithms were also evaluated, such as Laplacian and Taubin smoothing. A total of 142 semilandmarks were used to capture the shape of both proximal and distal fibular epiphyses. After Generalized Procrustes superimposition, the Procrustes coordinates of the proximal and distal fibular epiphyses were used separately to assess variation due to scanning methods and the operator error. Smoothing algorithms at low iteration do not provide significant variation among reconstructions, but segmentation protocol may influence final mesh quality (0.09-0.24 mm). Mean deviation among CT-generated meshes that were segmented with MIA-clustering protocol, and laser scanner-generated ones, is optimal (0.42 mm, ranging 0.35-0.56 mm). Principal component analysis reveals that homologous samples scanned with the two methods cluster together for both the proximal and distal fibular epiphyses. Similarly, Procrustes ANOVA reveals no shape differences between scanning methods and replicates, and only 1.38-1.43% of shape variation is due to scanning device. Topological similarities support the comparability of CT- and laser scanner-generated meshes and validate its simultaneous use in shape analysis with potential clinical relevance. We precautionarily suggest that dedicated trials should be performed in each study when merging different data sources prior to analyses.

IMRT versus 2D/3D conformal RT in oropharyngeal cancer: A review of the literature and meta-analysis.

Based on literature, intensity-modulated radiation therapy (IMRT) provides less related toxicity compared with conventional 2D/3D-RT with no impact on oncological outcomes for oropharyngeal cancer. The aim of this systematic review and meta-analysis is to assess whether IMRT might provide similar clinical outcomes with reduced related toxicity in comparison with conventional 2D/3D RT in patients treated for clinically advanced oropharyngeal cancer (OPC). Inclusion criteria for paper selection included: squamous OPC patients, treatment performed by concomitant CRT or RT alone, four treatment performed for curative intent, and presence of clinical outcome of interest, namely, overall survival (OS) and disease-free survival (DFS) and full paper available in English. Acute and late toxicities were retrieved together with OS and DFS. Crude relative risk estimates of relapse and death comparing 2D/3D-RT versus IMRT were calculated from tabular data, extracting events at 2-3 years of follow-up. Eight studies were selected. Six of them were included in the meta-analysis considering summary relative risk. Considering both acute and late toxicities, the considered studies evidenced advantages for IMRT populations, with the 2D/3D-RT population showing higher frequencies than the IMRT one. No statistical difference between IMRT and 2D/3D-RT in terms of death (SRR = 0.93, 95% CI: 0.83-1.04 with no heterogeneity I2  = 0%) and relapse (SRR = 0.92, 95% CI: 0.83-1.03, with no heterogeneity I2  = 0%) was found. Results of our study suggest the improvement in the therapeutic index with IMRT with evidenced reduced toxicity without any worsening in clinical outcome when compared to 2D/3DCRT.

Weight bearing versus conventional CT for the measurement of patellar alignment and stability in patients after surgical treatment for patellar recurrent dislocation.

PURPOSE: To compare weight-bearing cone-beam computer tomography (CBCT) and conventional computer tomography (CT)-based measurements of patellofemoral alignment and stability in patients surgically treated for recurrent patellar dislocation. These scans implied respectively single-leg up-right posture, the knee flexed, and lower limb muscles activation, versus supine position with the knee extended. METHODS: A total of 17 patients (11 males/6 females) after surgical reconstruction with fascia lata allograft for recurrent patellofemoral dislocation were analyzed at 60-month follow-up. Tilt and congruence angles and tibial tuberosity-trochlear groove (TT-TG) offset were measured on images obtained from CBCT and conventional CT scans by three independent and expert radiologists. Paired t tests were performed to compare measurements obtained from the two scans. Inter-rater reliability was assessed using a two-way mixed-effects model intra-class correlation coefficient (ICC). RESULTS: Only TT-TG offset was found significantly smaller (p < 0.001) in CBCT (mean 9.9 ± 5.3 mm) than in conventional CT (mean 15.9 ± 4.9 mm) scans. ICC for tilt and congruence angles and for TT-TG offset ranged between 0.80-0.94 with measurements in CBCT scans, between 0.52 and0.78 in conventional CT. CONCLUSION: In patients surgically treated for recurrent patellar dislocation, TT-TG offset was found overestimated with conventional CT. All measurements of patellofemoral stability and alignment were found more consistent when obtained with weight-bearing CBCT compared to conventional CT.

Techniques for 3D foot bone orientation angles in weight-bearing from cone-beam computed tomography.

BACKGROUND: For the diagnosis and treatment of foot and ankle disorders, objective quantification of the absolute and relative orientation angles is necessary. The present work aims at assessing novel techniques for 3D measures of foot bone angles from current Cone-Beam technology. METHODS: A normal foot was scanned via weight-bearing CT and 3D-model of each bone was obtained. Principal Component Analysis, landmark-based and mid-diaphyseal axes were exploited to obtain bone anatomical references. Absolute and relative angles between calcaneus and first metatarsal bone were calculated both in 3D and in a simulated sagittal projections. The effects of malpositioning were also investigated via rotations of the entire foot model. RESULTS: Large angle variations were found between the different definitions. For the 3D relative orientation, variations larger than 10 degrees were found. Foot malposition in axial rotation or in varus/valgus can result in errors larger than 5 and 3 degrees, respectively. CONCLUSIONS: New measures of foot bone orientation are possible in 3D and in weight-bearing, removing operator variability and the effects of foot positioning.

Weight-bearing CT Technology in Musculoskeletal Pathologies of the Lower Limbs: Techniques, Initial Applications, and Preliminary Combinations with Gait-Analysis Measurements at the Istituto Ortopedico Rizzoli.

Musculoskeletal radiology has been mostly limited by the option between imaging under load but in two dimensions (i.e., radiographs) and three-dimensional (3D) scans but in unloaded conditions (i.e., computed tomography [CT] and magnetic resonance imaging in a supine position). Cone-beam technology is now also a way to image the extremities with 3D and weight-bearing CT. This article discusses the initial experience over a few studies in progress at an orthopaedic center. The custom design of total ankle replacements, the patellofemoral alignment after medial ligament reconstruction, the overall architecture of the foot bones in the diabetic foot, and the radiographic assessment of the rearfoot after subtalar fusion for correction of severe flat foot have all taken advantage of the 3D and weight-bearing feature of relevant CT scans. To further support these novel assessments, techniques have been developed to obtain 3D models of the bones from the scans and to merge these with state-of-the-art gait analyses.

Stereotactic body radiation therapy for mediastinal lymph node metastases: how do we fly in a 'no-fly zone'?

PURPOSE: To evaluate the treatment-induced toxicity (as primary endpoint) and the efficacy (as secondary endpoint) of stereotactic body radiation therapy (SBRT) in the treatment of mediastinal lymph nodes (LNs) in the so-called no-fly zone (NFZ) in cancers with various histology. MATERIAL AND METHODS: Forty-two patients were retrospectively analyzed. Institutional dose/volume constraints for organs at risk (OARs) derived by published data were strictly respected. The correlation between treatment-related variables and toxicity was investigated by logistic regression, Chi-squared test or Fisher's exact test. Overall survival (OS), cause-specific survival (CSS), progression-free survival (PFS) and local control (LC) were collected from the follow-up reports. The impact of potential predictive factors on LC, PFS and OS were estimated by Cox proportional-hazard regression. RESULTS: Median follow-up time was 16 months (range 1-41). Four patients had esophageal G1 toxicity. Ten and six patients had G1 and G2 pulmonary toxicity, respectively. Treatment site and irradiation technique were significantly correlated with G ≥ 2 and G ≥ 1 toxicity, respectively. OS probability at 19 months was 88.3% and corresponded to CSS. LC probability at 16 months was 66.3% (median LC duration: 22 months, range 1-41). Fifteen patients (35.7%) were disease-free at 25 months (median time, range 1-41). The biologically effective dose (BED) and the target dose coverage indexes were significantly correlated with LC. CONCLUSIONS: SBRT can be considered as a safe treatment option for selected patients with oligo-metastases/recurrences in the NFZ, if strict dose/volume constraints are applied.

How effective is embolization with N-2-butyl-cyanoacrylate for aneurysmal bone cysts?

PURPOSE: To evaluate the outcome of selective arterial embolization with N-2-butyl-cyanoacrylate for aneurysmal bone cysts. METHODS: We retrospectively studied 102 patients (72 male, 30 female; mean age, 16 years; range, 3-60 years) with aneurysmal bone cysts treated with embolization with N-2-butyl-cyanoacrylate. Mean follow-up was seven years (range, 3-13 years); no patient was lost to follow-up. We evaluated healing and recurrences of the lesions, complications and cost of the procedures, and recurrences with respect to age and gender of the patients, and size and location of the lesions. RESULTS: Embolization was feasible in 88 patients (86.3%), and not feasible in 14 patients (13.6%) because feeding arteries were not identified or the spinal artery of Adamkiewicz was recognized at the embolization field. Seventy two patients (81.8%) experienced complete healing of their lesions after a single (50 patients, 56.8%), a second (17 patients, 19.3%) or a third embolization (5 patients, 5.7%). Sixteen patients (18.2%) experienced recurrence within four months (range, 3-9 months) after embolization; these patients underwent surgical treatment. Recurrences were more common in patients younger than 15 years of age and cysts larger than 6 cm, without any difference with respect to gender and location. Four patients (4.5%) experienced a complication including skin necrosis, sciatic nerve paresthesias, and femoral artery pseudoaneurysm. The cost estimate was 3000 euro per procedure. CONCLUSION: Embolization of aneurysmal bone cysts with N-2-butyl-cyanoacrylate is associated with good results and low complication rates, however, experience, technical skills, and knowledge of the vascular anatomy of the area is necessary.

Foot kinematics as a function of ground orientation and weightbearing.

The foot is responsible for the bodyweight transfer to the ground, while adapting to different terrains and activities. Despite this fundamental role, the knowledge about the foot bone intrinsic kinematics is still limited. The aim of the study is to provide a quantitative and systematic description of the kinematics of all bones in the foot, considering the full range of dorsi/plantar flexion and pronation/supination of the foot, both in weightbearing and nonweightbearing conditions. Bone kinematics was accurately reconstructed for three specimens from a series of computed tomography scans taken in weightbearing configuration. The ground inclination was imposed through a set of wedges, varying the foot orientation both in the sagittal and coronal planes; the donor body-weight was applied or removed by a cable-rig. A total of 32 scans for each foot were acquired and segmented. Bone kinematics was expressed in terms of anatomical reference systems optimized for the foot kinematic description. Results agree with previous literature where available. However, our analysis reveals that bones such as calcaneus, navicular, intermediate cuneiform, fourth and fifth metatarsal move more during foot pronation than flexion. Weightbearing significantly increase the range of motion of almost all the bone. Cuneiform and metatarsal move more due to weightbearing than in response to ground inclination, showing their role in the load-acceptance phase. The data here reported represent a step toward a deeper understanding of the foot behavior, that may help in the definition of better treatment and medical devices, as well as new biomechanical model of the foot.

3D-printed boluses for radiotherapy: influence of geometrical and printing parameters on dosimetric characterization and air gap evaluation.

The work investigates the implementation of personalized radiotherapy boluses by means of additive manufacturing technologies. Boluses materials that are currently used need an excessive amount of human intervention which leads to reduced repeatability in terms of dosimetry. Additive manufacturing can solve this problem by eliminating the human factor in the process of fabrication. Planar boluses with fixed geometry and personalized boluses printed starting from a computed tomography scan of a radiotherapy phantom were produced. First, a dosimetric characterization study on planar bolus designs to quantify the effects of print parameters such as infill density and geometry on the radiation beam was made. Secondly, a volumetric quantification of air gap between the bolus and the skin of the patient as well as dosimetric analyses were performed. The optimization process according to the obtained dosimetric and airgap results allowed us to find a combination of parameters to have the 3D-printed bolus performing similarly to that in conventional use. These preliminary results confirm those in the relevant literature, with 3D-printed boluses showing a dosimetric performance similar to conventional boluses with the additional advantage of being perfectly conformed to the patient geometry.

Osteobiography of a 19th century elderly woman with pertrochanteric fracture and osteoporosis: a multidisciplinary approach.

In this paper the osteobiography of an elderly woman recovered from a cemetery tomb where she was buried in 1850, affected by hip fracture and osteoporosis, is described. The overall anthropological characteristics of the individual have been investigated. Macroscopic, radiographic, tomographic, microscopic, and chemical and structural examinations have been performed to give a detailed account of the condition of the skeleton. A non-union pertrochanteric fracture not surgically treated and probably due to senile osteoporosis was diagnosed. The consequences of the fracture to the bones show that this individual likely survived several years following the injury. The osseous features we describe (remodelled bone at the fracture site, asymmetry of entheseal changes likely related to the particular walking pattern of the individual) may be useful in personal identification of skeletons of legal interest. Regarding the recognition of osteoporosis in unearthed skeletons, our study underlines that the cortical thickness, microscopic features, degree of crystallinity and Ca/P ratio represent more useful elements than the mean bone density, mineral/matrix ratio and mineral maturity, which are more sensitive to diagenetic changes that affect the mineral phase post-mortem.

Cyberknife Radiosurgery for Prostate Cancer after Abdominoperineal Resection (CYRANO): The Combined Computer Tomography and Electromagnetic Navigation Guided Transperineal Fiducial Markers Implantation Technique.

In this technical development report, we present the strategic placement of fiducial markers within the prostate under the guidance of computed tomography (CT) and electromagnetic navigation (EMN) for the delivery of ultra-hypofractionated cyberknife (CK) therapy in a patient with localized prostate cancer (PCa) who had previously undergone chemo-radiotherapy for rectal cancer and subsequent abdominoperineal resection due to local recurrence. The patient was positioned in a prone position with a pillow under the pelvis to facilitate access, and an electromagnetic fiducial marker was placed on the patient's skin to establish a stable position. CT scans were performed to plan the procedure, mark virtual points, and simulate the needle trajectory using the navigation system. Local anesthesia was administered, and a 21G needle was used to place the fiducial markers according to the navigation system information. A confirmatory CT scan was obtained to ensure proper positioning. The implantation procedure was safe, without any acute side effects such as pain, hematuria, dysuria, or hematospermia. Our report highlights the ability to use EMN systems to virtually navigate within a pre-acquired imaging dataset in the interventional room, allowing for non-conventional approaches and potentially revolutionizing fiducial marker positioning, offering new perspectives for PCa treatment in selected cases.

Brain metastases from NSCLC treated with stereotactic radiotherapy: prediction mismatch between two different radiomic platforms.

BACKGROUND AND PURPOSE: Radiomics enables the mining of quantitative features from medical images. The influence of the radiomic feature extraction software on the final performance of models is still a poorly understood topic. This study aimed to investigate the ability of radiomic features extracted by two different radiomic platforms to predict clinical outcomes in patients treated with radiosurgery for brain metastases from non-small cell lung cancer. We developed models integrating pre-treatment magnetic resonance imaging (MRI)-derived radiomic features and clinical data. MATERIALS AND METHODS: Pre-radiotherapy gadolinium enhanced axial T1-weighted MRI scans were used. MRI images were re-sampled, intensity-shifted, and histogram-matched before radiomic extraction by means of two different platforms (PyRadiomics and SOPHiA Radiomics). We adopted LASSO Cox regression models for multivariable analyses by creating radiomic, clinical, and combined models using three survival clinical endpoints (local control, distant progression, and overall survival). The statistical analysis was repeated 50 times with different random seeds and the median concordance index was used as performance metric of the models. RESULTS: We analysed 276 metastases from 148 patients. The use of the two platforms resulted in differences in both the quality and the number of extractable features. That led to mismatches in terms of end-to-end performance, statistical significance of radiomic scores, and clinical covariates found significant in combined models. CONCLUSION: This study shed new light on how extracting radiomic features from the same images using two different platforms could yield several discrepancies. That may lead to acute consequences on drawing conclusions, comparing results across the literature, and translating radiomics into clinical practice.

3D measurement techniques for the hindfoot alignment angle from weight-bearing CT in a clinical population.

Cone-beam CT (CBCT) scans now enable accurate measurements on foot skeletal structures with the advantage of observing these in 3D and in weight-bearing. Among the most common skeletal deformities, the varus/valgus of the hindfoot is the most complex to be represented, and a number of measure proposals have been published. This study aims to analyze and to compare these measurements from CBCT scans in a real clinical population with large such deformity. Ten patients with severe acquired adult flatfoot and indication for surgery underwent CBCT scans (Carestream, USA) while standing on that leg, before and after surgical correction. Corresponding 3D shape of each bone of the distal shank and hindfoot were defined (Materialise, Belgium). Six different techniques from the literature were used to calculate the varus/valgus deformity, i.e. the inclination of the hindfoot in the frontal plane of the shank. Standard clinical measurements by goniometers were taken for comparison. According to these techniques, and starting from a careful 3D reconstruction of the relevant foot skeletal structures, a large spectrum of measurements was found to represent the same hindfoot alignment angle. Most of them were very different from the traditional clinical measures. The assessment of the pre-operative valgus deformity and of the corresponding post-operative correction varied considerably. CBCT finally allows 3D assessment of foot deformities in weight-bearing. Measurements from the different available techniques do not compare well, as they are based on very different approaches. It is recommended to be aware of the anatomical and functional concepts behind these techniques before clinical and surgical conclusions.

Sexual Dimorphism in the Fibular Extremities of Italians and South Africans of Identified Modern Human Skeletal Collections: A Geometric Morphometric Approach.

Fibular metric variations have revealed their potential in distinguishing between males and females; however the fibula remains scarcely analyzed in studies of sexual dimorphism. This work aims at investigating sexually dimorphic features in fibular proximal and distal epiphyses through geometric morphometrics methods. A total of 136 left fibulae, from two Italian and one South African identified skeletal collections were virtually acquired through CT and laser scanning and analyzed using geometric morphometric methods. Statistical analyses were performed on shape, form, and size variables. Results show that fibular epiphyses are smaller with narrower articular surfaces in females than in males in both extremities. Relevant sexual differences emerge in fibular form and size for the two Italian samples but not for the South African one, likely for its small sample size. Discriminant analysis on form principal components (PCs) offers accuracy above 80% when the samples are pooled, and reaches accuracy of 80-93% when the Italian samples are considered separately. However, our method on form PCs was not successful for the South African sample (50-53% accuracy), possibly due to the small sample size. These results show relevant morphological variation in relation to fibular form and size, with a degree of accuracy that indicates the utility of the present method for sexing human fibulae in both forensic and bioarchaeological contexts for Italian samples.

Dual-Energy Computed Tomography Applications to Reduce Metal Artifacts in Hip Prostheses: A Phantom Study.

Metal components of hip prostheses cause severe artifacts in CT images, influencing diagnostic accuracy. Metal artifact reduction (MAR) software and virtual monoenergetic reconstructions on dual-energy CT (DECT) systems are possible solutions that should be considered. In this study, we created a customized adjustable phantom to quantify the severity of artifacts on periprosthetic tissues (cortical and spongious bone, soft tissues) for hip prostheses. The severity of artifacts was classified by different thresholds of deviation from the CT numbers for reference objects not affected by artifacts. The in vitro setup was applied on four unilateral and three bilateral configurations of hip prostheses (made of titanium, cobalt, and stainless steel alloys) with a DECT system, changing the energy of virtual monoenergetic reconstructions, with and without MAR. The impact of these tools on the severity of artifacts was scored, looking for the best scan conditions for the different configurations. For titanium prostheses, the reconstruction at 110 keV, without MAR, always minimized the artifacts. For cobalt and stainless-steel prostheses, MAR should always be applied, while monoenergetic reconstruction alone did not show clear advantages. The available tools for reducing metal artifacts must therefore be applied depending on the examined prosthetic configuration.

Superimposition of ground reaction force on tibial-plateau supporting diagnostics and post-operative evaluations in high-tibial osteotomy. A novel methodology.

BACKGROUND: A fully personalised combination of Gait Analysis (GA), including Ground Reaction Force (GRF), and patient-specific knee joint morphology has not yet been reported. This can provide valuable biomechanical insight in normal and pathological conditions. Abnormal knee varus results in medial knee condylar hyper-compression and osteoarthritis, which can be prevented by restoring proper condylar load distribution via High Tibial Osteotomy (HTO). RESEARCH QUESTION: This study was aimed at reporting on an original methodology, merging GA, GRF and Computer-Tomography (CT) to depict a patient-specific representation of the knee mechanical condition during locomotion. It was hypothesised that HTO results in a lateralized pattern of GRF with respect to the tibial plateau. METHODS: Four patients selected for HTO received clinical, radiological and instrumental examinations, pre- and post-operatively at 6-month follow-up. GA was performed during level walking and more demanding motor tasks using a 9-camera motion-capture system, combined with two force platforms, and an established protocol. Additional skin markers were positioned around the tibial-plateau rim. Weight-bearing CT scans of the knee were collected while still wearing these markers. Proximal tibial and marker morphological models were reconstructed. The markers from CT reconstruction were then registered to the corresponding trajectories as tracked by GA data. Resulting registration matrices were used to report GRF vectors on the plane best matching the tibial-plateau model and the intersection paths were calculated. RESULTS AND SIGNIFICANCE: The registration procedure was successfully executed, with a max registration error of about 3 mm. GRF intersection paths were found medially to the tibial plateau pre-op, and lateralized post-op, thus much closer to the knee centre, as expected after HTO. The exploitation of the present methodology offers personalised quantification of the original mechanical misalignment and of the effect of surgical correction which could enhance diagnostics and planning of HTO as well as other knee treatments.

Can Computer-Assisted Total Knee Arthroplasty Support the Prediction of Postoperative Three-Dimensional Kinematics of the Tibiofemoral and Patellofemoral Joints at the Replaced Knee?

The aim of this study was to analyze the extent to which postoperative patellofemoral joint (PFJ) kinematics assessed at 6-month follow-up after total knee arthroplasty (TKA) mimics the intraoperative kinematics after final component implantation. The study hypothesis, already proved in terms of tibiofemoral joint (TFJ) kinematics, is that the intraoperative assessment of PFJ kinematics after component implantation is also capable of predicting postoperative knee kinematics during activities of daily living. Twenty patients selected for TKA with patellar resurfacing were implanted using surgical navigation, including patellar component positioning via a novel computer-assisted procedure. This allowed for intraoperative TFJ and PFJ kinematic assessment after final component implantation. At 6-month follow-up, all patients were contacted for follow-up control; in addition to clinical examination, this implied postoperative kinematics assessments by three-dimensional video fluoroscopy of the replaced knee during standard activities of daily living. Several traditional PFJ, as well as TFJ, rotations and translations were calculated intra- and postoperatively and then statistically compared. Good postoperative replication of the intraoperative measurements was observed for most of PFJ variables analyzed, as well as those for TFJ. Relevant statistical analysis also supported the significant consistency between the intra- and postoperative measurements. Pertaining to the present findings on a statistical basis, intraoperative measurements performed at both TFJ and PFJ kinematics using a surgical navigation system under passive conditions, are predictive of the overall knee kinematics experienced at postoperative follow-ups by the same replaced knees in typical activities of daily living.

New anatomical reference systems for the bones of the foot and ankle complex: definitions and exploitation on clinical conditions.

BACKGROUND: A complete definition of anatomical reference systems (ARS) for all bones of the foot and ankle complex is lacking. Using a morphological approach, we propose new ARS for these bones with the aim of being highly repeatable, consistent among individuals, clinically interpretable, and also suited for a sound kinematic description. METHODS: Three specimens from healthy donors and three patients with flat feet were scanned in weight-bearing CT. The foot bones were segmented and ARS defined according to the proposed approach. To assess repeatability, intra class coefficients (ICC) were computed both intra- and inter-operator. Consistency was evaluated as the mean of the standard deviations of the ARS position and orientation, both within normal and flat feet. Clinical interpretability was evaluated by providing a quantification of the curvature variation in the medial-longitudinal and transverse arches and computing the Djiann-Annonier angle for normal and flat feet from these new ARS axes. To test the capability to also provide a sound description of the foot kinematics, the alignment between mean helical axes (MHA) and ARS axes was quantified. RESULTS: ICC was 0.99 both inter- and intra-operator. Rotational consistency was 4.7 ± 3.5 ° and 6.2 ± 4.4° for the normal and flat feet, respectively; translational consistency was 4.4 ± 4.0 mm and 5.4 ± 2.9 mm for the normal and flat feet, respectively. In both these cases, the consistency was better than what was achieved by using principal axes of inertia. Curvature variation in the arches were well described and the measurements of the Djiann-Annoier angles from both normal and flat feet matched corresponding clinical observations. The angle between tibio-talar MHA and ARS mediolateral axis in the talus was 12.3 ± 6.0, while the angle between talo-calcaneal MHA and ARS anteroposterior axis in the calcaneus was 17.2 ± 5.6, suggesting good capability to represent joint kinematics. CONCLUSIONS: The proposed ARS definitions are robust and provide a solid base for the 3-dimensional description of posture and motion of the foot and ankle complex from medical imaging.