Newborn screening for aromatic l-amino acid decarboxylase deficiency - Strategies, results, and implication for prevalence calculations.

BACKGROUND: Aromatic l-amino acid decarboxylase deficiency (AADCD) is a rare, autosomal-recessive neurometabolic disorder caused by variants in dopa decarboxylase (DDC) gene, resulting in a severe combined deficiency of serotonin, dopamine, norepinephrine, and epinephrine. Birth prevalence of AADCD varies by population. In pilot studies, 3-O-methyldopa (3-OMD) was shown to be a reliable biomarker for AADCD in high-throughput newborn screening (NBS) allowing an early diagnosis and access to gene therapy. To evaluate the usefulness of this method for routine NBS, 3-OMD screening results from the largest three German NBS centers were analyzed. METHODS: A prospective, multicenter (n = 3) NBS pilot study evaluated screening for AADCD by quantifying 3-OMD in dried blood spots (DBS) using tandem mass spectrometry (MS/MS). RESULTS: In total, 766,660 neonates were screened from January 2021 until June 2023 with 766,647 with unremarkable AADCD NBS (766,443 by 1st-tier analysis and 204 by 2nd-tier analysis) and 13 with positive NBS result recalled for confirmatory diagnostics (recall-rate about 1:59,000). Molecular genetic analysis confirmed AADCD (c.79C > T p.[Arg27Cys] in Exon 2 und c.215 A > C p.[His72Pro] in Exon 3) in one infant. Another individual was highly suspected with AADCD but died before confirmation (overall positive predictive value 0.15). False-positive results were caused by maternal L-Dopa use (n = 2) and prematurity (30th and 36th week of gestation, n = 2). However, in 63% (n = 7) the underlying etiology for false positive results remained unexplained. Estimated birth prevalence (95% confidence interval) was 1:766,660 (95% CI 1:775,194; 1:769,231) to 1:383,330 (95% CI 1:384,615; 1:383,142). The identified child remained asymptomatic until last follow up at the age of 9 months. CONCLUSIONS: The proposed screening strategy with 3-OMD detection in DBS is feasible and effective to identify individuals with AADCD. The estimated birth prevalence supports earlier estimations and confirms AADCD as a very rare disorder. Pre-symptomatic identification by NBS allows a disease severity adapted drug support to diminish clinical complications until individuals are old enough for the application of the gene therapy.

Variable detection of Omicron-BA.1 and -BA.2 by SARS-CoV-2 rapid antigen tests.

During 2022, the COVID-19 pandemic has been dominated by the variant of concern (VoC) Omicron (B.1.1.529) and its rapidly emerging subvariants, including Omicron-BA.1 and -BA.2. Rapid antigen tests (RATs) are part of national testing strategies to identify SARS-CoV-2 infections on site in a community setting or to support layman's diagnostics at home. We and others have recently demonstrated an impaired RAT detection of infections caused by Omicron-BA.1 compared to Delta. Here, we evaluated the performance of five SARS-CoV-2 RATs in a single-centre laboratory study examining a total of 140 SARS-CoV-2 PCR-positive respiratory swab samples, 70 Omicron-BA.1 and 70 Omicron-BA.2, as well as 52 SARS-CoV-2 PCR-negative swabs collected from March 8th until April 10th, 2022. One test did not meet minimal criteria for specificity. In an assessment of the analytical sensitivity in clinical specimen, the 50% limit of detection (LoD50) ranged from 4.2 × 104 to 9.2 × 105 RNA copies subjected to the RAT for Omicron-BA.1 compared to 1.3 × 105 to 1.5 × 106 for Omicron-BA.2. Overall, intra-assay differences for the detection of Omicron-BA.1-containing and Omicron-BA.2-containing samples were non-significant, while a marked overall heterogeneity among the five RATs was observed. To score positive in these point-of-care tests, up to 22-fold (LoD50) or 68-fold (LoD95) higher viral loads were required for the worst performing compared to the best performing RAT. The rates of true-positive test results for these Omicron subvariant-containing samples in the highest viral load category (Ct values < 25) ranged between 44.7 and 91.1%, while they dropped to 8.7 to 22.7% for samples with intermediate Ct values (25-30). In light of recent reports on the emergence of two novel Omicron-BA.2 subvariants, Omicron-BA.2.75 and BJ.1, awareness must be increased for the overall reduced detection rate and marked differences in RAT performance for these Omicron subvariants.

Ten rapid antigen tests for SARS-CoV-2 widely differ in their ability to detect Omicron-BA.4 and -BA.5.

Since late 2021, the variant landscape of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been dominated by the variant of concern (VoC) Omicron and its sublineages. We and others have shown that the detection of Omicron-BA.1 and -BA.2-positive respiratory specimens by rapid antigen tests (RATs) is impaired compared to Delta VoC-containing samples. Here, in a single-center retrospective laboratory study, we evaluated the performance of ten most commonly used RATs for the detection of Omicron-BA.4 and -BA.5 infections. We used 171 respiratory swab specimens from SARS-CoV-2 RNA-positive patients, of which 71 were classified as BA.4 and 100 as BA.5. All swabs were collected between July and September 2022. 50 SARS-CoV-2 PCR-negative samples from healthy individuals, collected in October 2022, showed high specificity in 9 out of 10 RATs. When assessing analytical sensitivity using clinical specimens, the 50% limit of detection (LoD50) ranged from 7.6 × 104 to 3.3 × 106 RNA copies subjected to the RATs for BA.4 compared to 6.8 × 104 to 3.0 × 106 for BA.5. Overall, intra-assay differences for the detection of these two Omicron subvariants were not significant for both respiratory swabs and tissue culture-expanded virus isolates. In contrast, marked heterogeneity was observed among the ten RATs: to be positive in these point-of-care tests, up to 443-fold (BA.4) and up to 56-fold (BA.5) higher viral loads were required for the worst performing RAT compared to the best performing RAT. True-positive rates for Omicron-BA.4- or -BA.5-containing specimens in the highest viral load category (Ct values < 25) ranged from 94.3 to 34.3%, dropping to 25.6 to 0% for samples with intermediate Ct values (25-30). We conclude that the high heterogeneity in the performance of commonly used RATs remains a challenge for the general public to obtain reliable results in the evolving Omicron subvariant-driven pandemic.

Automated antigen assays display a high heterogeneity for the detection of SARS-CoV-2 variants of concern, including several Omicron sublineages.

Diagnostic tests for direct pathogen detection have been instrumental to contain the severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) pandemic. Automated, quantitative, laboratory-based nucleocapsid antigen (Ag) tests for SARS-CoV-2 have been launched alongside nucleic acid-based test systems and point-of-care (POC) lateral-flow Ag tests. Here, we evaluated four commercial Ag tests on automated platforms for the detection of different sublineages of the SARS-CoV-2 Omicron variant of concern (VoC) (B.1.1.529) in comparison with "non-Omicron" VoCs. A total of 203 Omicron PCR-positive respiratory swabs (53 BA.1, 48 BA.2, 23 BQ.1, 39 XBB.1.5 and 40 other subvariants) from the period February to March 2022 and from March 2023 were examined. In addition, tissue culture-expanded clinical isolates of Delta (B.1.617.2), Omicron-BA.1, -BF.7, -BN.1 and -BQ.1 were studied. These results were compared to previously reported data from 107 clinical "non-Omicron" samples from the end of the second pandemic wave (February to March 2021) as well as cell culture-derived samples of wildtype (wt) EU-1 (B.1.177), Alpha VoC (B.1.1.7) and Beta VoC (B.1.351)). All four commercial Ag tests were able to detect at least 90.9% of Omicron-containing samples with high viral loads (Ct < 25). The rates of true-positive test results for BA.1/BA.2-positive samples with intermediate viral loads (Ct 25-30) ranged between 6.7% and 100.0%, while they dropped to 0 to 15.4% for samples with low Ct values (> 30). This heterogeneity was reflected also by the tests' 50%-limit of detection (LoD50) values ranging from 44,444 to 1,866,900 Geq/ml. Respiratory samples containing Omicron-BQ.1/XBB.1.5 or other Omicron subvariants that emerged in 2023 were detected with enormous heterogeneity (0 to 100%) for the intermediate and low viral load ranges with LoD50 values between 23,019 and 1,152,048 Geq/ml. In contrast, detection of "non-Omicron" samples was more sensitive, scoring positive in 35 to 100% for the intermediate and 1.3 to 32.9% of cases for the low viral loads, respectively, corresponding to LoD50 values ranging from 6181 to 749,792 Geq/ml. All four assays detected cell culture-expanded VoCs Alpha, Beta, Delta and Omicron subvariants carrying up to six amino acid mutations in the nucleocapsid protein with sensitivities comparable to the non-VoC EU-1. Overall, automated quantitative SARS-CoV-2 Ag assays are not more sensitive than standard rapid antigen tests used in POC settings and show a high heterogeneity in performance for VoC recognition. The best of these automated Ag tests may have the potential to complement nucleic acid-based assays for SARS-CoV-2 diagnostics in settings not primarily focused on the protection of vulnerable groups. In light of the constant emergence of new Omicron subvariants and recombinants, most recently the XBB lineage, these tests' performance must be regularly re-evaluated, especially when new VoCs carry mutations in the nucleocapsid protein or immunological and clinical parameters change.

High Throughput Newborn Screening for Sickle Cell Disease - Application of Two-Tiered Testing with a qPCR-Based Primary screen.

BACKGROUND: Sickle cell disease (SCD) is a group of hemoglobinopathies with a common point mutation causing the production of sickle cell hemoglobin (HbS). In high-throughput newborn screening (NBS) for SCD, a two-step procedure is suitable, in which qPCR first pre-selects relevant samples that are differentiated by a second method. METHODS: Three NBS centers using qPCR-based primary screening for SCD performed a laboratory comparison. Methods using tandem MS or HPLC were used for differentiation. RESULTS: In a benchmarking test, 450 dried blood samples were analyzed. Samples containing HbS were detected as reliably by qPCR as by methods established for hemoglobinopathy testing. In a two-step screening approach, the 2nd-tier-analyses have to distinguish the carrier status from pathological variants. In nine months of regular screening, a total of 353,219 samples were analyzed using two-stage NBS procedures. The 1st-tier screening by qPCR reduced the number of samples for subsequent differentiation by>99.5%. Cases with carrier status or other variants were identified as inconspicuous while 78 cases with SCD were revealed. The derived incidence of 1:4,773, is in good agreement with previously published incidences. CONCLUSION: In high-throughput NBS for SCD, qPCR is suitable to focus 2nd-tier analyses on samples containing HbS, while being unaffected by factors such as prematurity or transfusions. The substantial reduction of samples numbers positively impacts resource conservation, sustainability, and cost-effectiveness. No false negative cases came to attention.

Impaired detection of omicron by SARS-CoV-2 rapid antigen tests.

Since autumn 2020, rapid antigen tests (RATs) have been implemented in several countries as an important pillar of the national testing strategy to rapidly screen for infections on site during the SARS-CoV-2 pandemic. The current surge in infection rates around the globe is driven by the variant of concern (VoC) omicron (B.1.1.529). Here, we evaluated the performance of nine SARS-CoV-2 RATs in a single-centre laboratory study. We examined a total of 115 SARS-CoV-2 PCR-negative and 166 SARS-CoV-2 PCR-positive respiratory swab samples (101 omicron, 65 delta (B.1.617.2)) collected from October 2021 until January 2022 as well as cell culture-expanded clinical isolates of both VoCs. In an assessment of the analytical sensitivity in clinical specimen, the 50% limit of detection (LoD50) ranged from 1.77 × 106 to 7.03 × 107 RNA copies subjected to the RAT for omicron compared to 1.32 × 105 to 2.05 × 106 for delta. To score positive in these point-of-care tests, up to 10-fold (LoD50) or 101-fold (LoD95) higher virus loads were required for omicron- compared to delta-containing samples. The rates of true positive test results for omicron samples in the highest virus load category (Ct values < 25) ranged between 31.4 and 77.8%, while they dropped to 0-8.3% for samples with intermediate Ct values (25-30). Of note, testing of expanded virus stocks suggested a comparable RAT sensitivity of both VoCs, questioning the predictive value of this type of in vitro-studies for clinical performance. Given their importance for national test strategies in the current omicron wave, awareness must be increased for the reduced detection rate of omicron infections by RATs and a short list of suitable RATs that fulfill the minimal requirements of performance should be rapidly disclosed.

Head-to-head evaluation of seven different seroassays including direct viral neutralisation in a representative cohort for SARS-CoV-2.

A number of seroassays are available for SARS-CoV-2 testing; yet, head-to-head evaluations of different testing principles are limited, especially using raw values rather than categorical data. In addition, identifying correlates of protection is of utmost importance, and comparisons of available testing systems with functional assays, such as direct viral neutralisation, are needed.We analysed 6658 samples consisting of true-positives (n=193), true-negatives (n=1091), and specimens of unknown status (n=5374). For primary testing, we used Euroimmun-Anti-SARS-CoV-2-ELISA-IgA/IgG and Roche-Elecsys-Anti-SARS-CoV-2. Subsequently virus-neutralisation, GeneScriptcPass, VIRAMED-SARS-CoV-2-ViraChip, and Mikrogen-recomLine-SARS-CoV-2-IgG were applied for confirmatory testing. Statistical modelling generated optimised assay cut-off thresholds. Sensitivity of Euroimmun-anti-S1-IgA was 64.8%, specificity 93.3% (manufacturer's cut-off); for Euroimmun-anti-S1-IgG, sensitivity was 77.2/79.8% (manufacturer's/optimised cut-offs), specificity 98.0/97.8%; Roche-anti-N sensitivity was 85.5/88.6%, specificity 99.8/99.7%. In true-positives, mean and median Euroimmun-anti-S1-IgA and -IgG titres decreased 30/90 days after RT-PCR-positivity, Roche-anti-N titres decreased significantly later. Virus-neutralisation was 80.6% sensitive, 100.0% specific (≥1:5 dilution). Neutralisation surrogate tests (GeneScriptcPass, Mikrogen-recomLine-RBD) were >94.9% sensitive and >98.1% specific. Optimised cut-offs improved test performances of several tests. Confirmatory testing with virus-neutralisation might be complemented with GeneScriptcPassTM or recomLine-RBD for certain applications. Head-to-head comparisons given here aim to contribute to the refinement of testing strategies for individual and public health use.

Polymerization kinetic calculations in dental composites: a method comparison analysis.

OBJECTIVES: This study aimed to describe the polymerization process and to quantify the parameters of influence in two bulk-fill resin-based composites by comparing two real-time methods: the Fourier transform infrared (FTIR) spectroscopy and the visible light transmission spectrometry. MATERIALS AND METHODS: The degree of conversion (DC) was recorded in real time for 5 min using the attenuated total reflectance FTIR spectroscopy (n = 6) on the lower surface of 2, 4, and 6 mm thick samples irradiated for 20 s. The variation in irradiance was recorded during material irradiation at the bottom of the samples (n = 5). Results were statistically analyzed using one-way and multiple-way ANOVAs with Tukey HSD post hoc test (α = 0.05), partial eta-squared statistics, and Pearson correlation. RESULTS: No significant difference was found in DC in any materials as a function of incremental thickness, whereas the irradiance passing the specimens differed consistently within both analyzed increments and materials. These data could be described by the superposition of two exponential functions, the first being attributed to the gel phase and the second to the glass phase, resulting in an exponential sum function. DC data were able to calculate the end of the gel phase and the beginning of the glass phase, whereas irradiance measurements were able to detect only the last phase. The polymerization kinetics in the glass phase was less material-dependent as in the gel phase. CONCLUSIONS: The irradiance measurements were more sensitive to variation in thickness, meaning that translucency is continuing to change as a function of thickness at a higher extent than DC. CLINICAL RELEVANCE: Knowing the impact of the modulation factors describing the calculated sum exponential function allows the manipulation of the polymerization process at different stages to tailor material properties.

Effect of radical amplified photopolymerization (RAP) in resin-based composites.

OBJECTIVE: The objective of this study was to evaluate the effect of irradiation time and specimens thickness on the polymerization kinetic and variation in micro-mechanical properties of two commercial resin-based composites (RBCs) based on radical amplified photopolymerization (RAP) technology™, and to compare them with four camphorquinone (CQ)/amine-based RBCs. MATERIALS AND METHODS: The materials were analysed by assessing the polymerization kinetic and the degree of cure (DC) at 0.1 mm and 2 mm depth during 5 minutes after photoinitiation, after curing for 10 s, 20 s and 40 s (Elipar Freelight2). The variation in micro-mechanical properties (Vickers hardness (HV), indentation modulus (E), and depth of cure (DOC)) was assessed in 100 µm steps on 6-mm-high specimens irradiated as above and stored in the water for 24 h at 37 °C. RESULTS: The results were statistically compared using one-way ANOVA with Tukey HSD post hoc test (α = 0.05) and a general linear model. The parameter material exerted the strongest effect on DC (partial eta-squared η p (2) = 0.83), followed by irradiation time (η p (2) = 0.27), and depth (η p (2) = 0.09). The polymerization kinetic, well described by an exponential sum function, showed in all materials a faster decrease in carbon-carbon double bonds at 0.1 mm than at 2 mm depth. The materials based on RAP achieved the highest DC values and a faster polymerization at both depths. The irradiation time exerted the strongest effect on the mechanical properties (DOC, η p (2) = 0.96; HV, η p (2) = 0.89; E, η p (2) = 0.86), followed by depth (HV, η p (2) = 0.63; E, η p (2) = 0.54) and material (HV, η p (2) = 0.40; E, η p (2) = 0.67). At the most favorable curing conditions (40 s, surface), the mechanical properties of the analyzed materials varied between 11.38 (0.80) GPa in Estelite® Sigma Quick and 20.80 (1.42) GPa in Estelite® Posterior for E, and between 74.33 (3.56) N/mm(2) in Tetric EvoCeram® and 120.71 (6.24) N/mm(2) in Estelite® Posterior for HV. CONCLUSIONS: RAP-initiated material demonstrated a higher increase in DOC with prolonged irradiation time than the analyzed CQ/amine based materials. CLINICAL RELEVANCE: An irradiation time of 20 s is also recommended for RAP-initiated RBCs.

Effect of modulated irradiation time on the degree of conversion and the amount of elutable substances from nano-hybrid resin-based composites.

OBJECTIVES: The aim of our study was to analyse whether the irradiation time and/or the modulation of irradiation time influence the degree of conversion (DC) and the amount of elutable substances from modern nano-hybrid resin-based composites (RBCs). MATERIALS AND METHODS: The DC was recorded in real time for 5 min by means of attenuated total reflectance-Fourier transform infrared spectroscopy (n = 5) on the lower surface of 2-mm-thick samples irradiated with continuous and modulated irradiation times for 20 s and 40 s. The modulated times comprise a short polymerisation (2 s or 5 s) followed by a rest period of 1 min and an additional polymerisation to complete 20 s and 40 s of polymerisation (2 s + 18 s, 5 s + 15 s, 2 s + 38 s and 5 s + 35 s). After storing the specimens in ethanol/water for 7 days at 37 °C, the eluates were analysed by gas chromatography-mass spectrometry. Results were statistically analyzed using a one-way ANOVA analysis (α = 0.05). RESULTS: The effect of irradiation time on DC is similar in all three analyzed materials, showing a significant increase in DC by increasing irradiation time from 20 s to 40 s, while the DC is not influenced within one irradiation time (20 s or 40 s) by the modulation of time. CONCLUSIONS: The type and amount of eluates are strongly dependent from the material and the irradiation protocol. CLINICAL RELEVANCE: An interrupt irradiation of RBCs is clinically feasible, reducing in general the amount of elutable substances at similar DC as the corresponding continuous polymerisation.

Quality considerations and major pitfalls for high throughput DNA-based newborn screening for severe combined immunodeficiency and spinal muscular atrophy.

BACKGROUND: Many newborn screening programs worldwide have introduced screening for diseases using DNA extracted from dried blood spots (DBS). In Germany, DNA-based assays are currently used to screen for severe combined immunodeficiency (SCID), spinal muscular atrophy (SMA), and sickle cell disease (SCD). METHODS: This study analysed the impact of pre-analytic DNA carry-over in sample preparation on the outcome of DNA-based newborn screening for SCID and SMA and compared the efficacy of rapid extraction versus automated protocols. Additionally, the distribution of T cell receptor excision circles (TREC) on DBS cards, commonly used for routine newborn screening, was determined. RESULTS: Contaminations from the punching procedure were detected in the SCID and SMA assays in all experimental setups tested. However, a careful evaluation of a cut-off allowed for a clear separation of true positive polymerase chain reaction (PCR) amplifications. Our rapid in-house extraction protocol produced similar amounts compared to automated commercial systems. Therefore, it can be used for reliable DNA-based screening. Additionally, the amount of extracted DNA significantly differs depending on the location of punching within a DBS. CONCLUSIONS: Newborn screening for SMA and SCID can be performed reliably. It is crucial to ensure that affected newborns are not overlooked. Therefore a carefully consideration of potential contaminating factors and the definition of appropriate cut-offs to minimise the risk of false results are of special concern. It is also important to note that the location of punching plays a pivotal role, and therefore an exact quantification of TREC numbers per µl may not be reliable and should therefore be avoided.

Newbornscreening SMA - From Pilot Project to Nationwide Screening in Germany.

Now that targeted therapies for spinal muscular atrophy are available, attempts are being made worldwide to include screening for spinal muscular atrophy in general newborn screening. In Germany, after pilot projects from 2018-2021, it was included in the general newborn screening from October 2021. To ensure a smooth transition, criteria for follow-up were developed together with key stakeholders. At the beginning of the transition to nationwide screening, false positive findings were reported in 3 patients. After optimization of the screening method in the laboratories concerned, all findings have been subsequently confirmed. On average, the first presentation to a neuromuscular center occurred on day 12 of life, and in patients with 2 or 3 SMN2 copies, therapy started on day 26 of life. Compared with the pilot project, there was no significant delay in timing.

Prognostic relevance of oncological serum biomarkers in liver cancer patients undergoing transarterial chemoembolization therapy.

As transarterial chemoembolization (TACE) therapy is an effective locoregional treatment for patients with advanced liver cancer, prognostic biomarkers are highly needed for pretherapeutic stratification of patients to TACE therapy. Sera of 50 prospectively and consecutively included patients with hepatocellular carcinoma (HCC) undergoing TACE were taken before and 24 h after TACE application. Levels of liver-specific, tumor-related, and cell death biomarkers were analyzed and correlated with overall patient survival. The study was particularly focused on patients treated by TACE with palliative intention (N = 38). Sixteen of 38 patients died within 1 year after TACE, 22 were still alive. In univariate analysis, high levels of cytokeratin 19-fragments (CYFRA 21-1), alpha fetoprotein (AFP), and low choline esterase (CHE) levels measured before and 24 h after TACE were correlated with unfavorable outcome. Further high pretherapeutic lactate dehydrogenase (LDH), aspartate-aminotransferase, and bilirubin levels as well as high 24 h C-reactive protein values were associated with poor survival. In multivariate analysis of clinical and only pretherapeutic biomarkers, AFP, CHE, and LDH showed to be independent prognostic parameters. When additionally 24 h values were included, CHE (24 h) and AFP (24 h) were the strongest independent prognostic biomarkers with a slightly higher prognostic power (Akaike's information criterion 90.3 vs. 92.7). The combination of AFP, CHE, and LDH enables efficient pretherapeutic stratification of HCC patients in advanced tumor stage for TACE therapy.

Comparison of fecal calprotectin and pancreatic elastase assays based on proficiency testing results.

BACKGROUND: Fecal calprotectin and fecal pancreatic elastase assays are not standardized because of a lack of suitable reference material. Laboratories may have difficulty in switching assays because different manufacturers do not compare well with each other despite having similar reference intervals. Data from proficiency testing performed in Germany (Fecal Diagnostics 01 Survey, INSTAND eV) were investigated to understand how results differed across eight calprotectin and five pancreatic elastase manufacturers. METHODS: Data were collected from participating laboratories in external quality assessment schemes from 2015 to 2020 for calprotectin and 2017 to 2020 for pancreatic elastase. The manufacturer group mean values and standard deviations were calculated. Reference points were created for each external quality assessment scheme by calculating the average of all manufacturer group means. Deming regression analyses were used to observe the differences across manufacturers. RESULTS: The slopes of the Deming regression spanned 0.37-1.91 for calprotectin and 0.84-1.33 for pancreatic elastase. The calprotectin assays had a high degree of variability in quantitative results by manufacturer. However, pancreatic elastase assays appear to be harmonized across the different manufacturer when considering the qualitative interpretation. CONCLUSIONS: Both calprotectin and pancreatic elastase assays could be improved by standardization efforts. Given the clinical utility and our data demonstrating high inter-manufacturer variability, calprotectin should be prioritized over pancreatic elastase in standardization efforts.

Verification of lateral flow antigen tests for SARS-CoV-2 by qPCR directly from the test device.

OBJECTIVE: Fast and reliable detection of infection is a key to control the SARS-CoV-2 pandemic. Lateral flow antigen tests (LFATs) are inexpensive, easy to use, but have to be verified, as they are rather unspecific and can produce both, false positive and false negative results. Our objective was to combine the speed of LFAT for SARS-CoV-2 with the reliability of qPCR tests. METHODS: A serial dilution of a patient sample positive for SARS-CoV-2 was prepared and added to LFAT wells from two manufacturers. After evaluation, the devices were opened, the strips removed and extracted in a solution. Amplification was performed using point of care PCR systems (cobas® Liat®, ID NOW™) or on a LightCycler after extraction by MagNAPure 96. RESULTS: The nucleic acid amplification systems yielded higher sensitivity to LFAT. Thus, all samples determined positive by LFAT from the serial dilution were also positive in the subsequent amplification reactions. Sensitivity using extracted eluates was 10-100 times higher. SIGNIFICANCE: The usage of LFAT is highly recommended for single samples in emergency dental or emergency clinical settings, for smaller cohorts, or even for larger population screening, as it is inexpensive and fast. Positive results can be conveniently verified directly from the test devices using either point of care test equipment or more complex laboratory equipment thus making a major impact on efficient management of infections and isolations.

Direct and indirect eluates from bulk fill resin-based-composites.

OBJECTIVES: To compare elutable substances directly released from bulk-fill (BF) resin-based composites (RBCs) with indirect elution from teeth restored with a BF composite. In addition to (co)monomers, the analytical focus was on other potentially toxic ingredients or impurities. Furthermore, the barrier function of the residual dentin/adhesive layer was studied. METHODS: Six BF-RBC materials were studied. For each material subgroup, ten human third molar teeth with standard Class-I occlusal cavities were prepared and provided with a three-step adhesive system and the respective composite restoration (tooth groups). Same sized control specimens of the restorative material were prepared ('direct BF-RBC' groups). Each specimen was placed in an elution chamber such that the elution media (ethanol/water, 3:1) only contacted the tooth root or ¾ height of each specimen. They were incubated at 37 °C for up to 7 d. Samples of eluate were taken after 1, 2, 4 and 7 d and were analysed by high-temperature gas chromatography/mass spectrometry. RESULTS: (Co)monomers such as Bisphenol A ethoxylate dimethacrylate (bisEMA) or tetraethylene glycol dimethacrylate (TEEGDMA) were mostly found in the eluates of the 'direct BF-RBC' groups in statistically significantly greater amounts than in the eluates of the 'tooth groups'. The residual dentin and/or adhesive layers acted as a diffusion barrier for most of the substances except for triethylene glycol dimethacrylate (TEGDMA) or diethylene glycol dimethacrylate (DEGDMA). For TEGDMA up to 3 orders of magnitude more were found in the 'tooth groups' compared to the 'direct BF-RBC' groups, evidently released by the adhesive system. Substances of Very High Concern (SVHC) including TINUVIN® 328 and BPA were found mainly in the eluates of 'direct BF-RBC' groups. SIGNIFICANCE: For estimation of biocompatibility, a total system, specifically BF-RBC + adhesive, should always be investigated since individual considerations, such as only elution from a BF-RBC, do not correctly reflect the total clinical situation. The focus of elution tests should not only be on the co(monomers), but also on other ingredients or impurities that may be released.

Relevance of circulating nucleosomes and oncological biomarkers for predicting response to transarterial chemoembolization therapy in liver cancer patients.

BACKGROUND: Transarterial chemoembolization (TACE) therapy is an effective locoregional treatment in hepatocellular cancer (HCC) patients. For early modification of therapy, markers predicting therapy response are urgently required. METHODS: Here, sera of 50 prospectively and consecutively included HCC patients undergoing 71 TACE therapies were taken before and 3 h, 6 h and 24 h after TACE application to analyze concentrations of circulating nucleosomes, cytokeratin-19 fragments (CYFRA 21-1), alpha fetoprotein (AFP), C-reactive protein (CRP) and several liver biomarkers, and to compare these with radiological response to therapy. RESULTS: While nucleosomes, CYFRA 21-1, CRP and some liver biomarkers increased already 24 h after TACE, percental changes of nucleosome concentrations before and 24 h after TACE and pre- and posttherapeutic values of AFP, gamma-glutamyl-transferase (GGT) and alkaline phosphatase (AP) significantly indicated the later therapy response (39 progression versus 32 no progression). In multivariate analysis, nucleosomes (24 h), AP (24 h) and TACE number were independent predictive markers. The risk score of this combination model achieved an AUC of 81.8% in receiver operating characteristic (ROC) curves and a sensitivity for prediction of non-response to therapy of 41% at 97% specificity, and of 72% at 78% specificity. CONCLUSION: Circulating nucleosomes and liver markers are valuable tools for early estimation of the efficacy of TACE therapy in HCC patients.

Pseudohypocalcemia caused by perchlorate (Irenat).

BACKGROUND: Blood gas analysis (BGA), including measurement of ionized calcium, is performed routinely in patients with end stage renal disease on renal replacement therapy, especially when using citrate for regional anticoagulation. After installation of a new blood gas analyzer (RAPIDpoint 405; BGA), we observed lower ionized calcium concentrations in a few patients without signs of hypocalcemia, whereas calcium concentrations were normal using a standard laboratory method. Pseudohypocalcemia was of limited duration and correlated with the short-term intake of sodium perchlorate monohydrate (Irenat). METHODS: We prepared dilution series from whole blood samples and stock solutions of calcium and perchlorate with different concentrations of ionized calcium and perchlorate. Measurement of ionized calcium concentrations was performed using two different blood gas analyzers (RAPIDpoint 405; BGA and Roche AVL 9180; standard laboratory method). RESULTS: After addition of different amounts of perchlorate, significant lower ionized calcium concentrations were measured with BGA compared to the standard laboratory method using either preparations from whole blood samples or stock solutions. The addition of potassium or methylene blue known to complex perchlorate had no effect on the concentrations of ionized calcium measured with BGA. Using different mathematical methods, a calculation of the "real" ionized calcium concentration from the value measured with BGA was not possible. CONCLUSIONS: Based on our experiments, we confirm the hypothesis that perchlorate can influence the measurement of ionized calcium by BGA. As the effect depends on the ion selective electrode that is used, it is advisable to test the blood gas analyzer with calcium and perchlorate solutions.

Induction of DNA strand breaks by dental composite components compared to X-ray exposure in human gingival fibroblasts.

The toxicity of dental composites has been attributed to the release of residual monomers from polymerized resin-based composites due to degradation processes or incomplete polymerization. Some of these eluted substances have a genotoxic potential. We tested the hypothesis that realistic concentrations (and/or worst case concentrations/situations) of bisphenol-A-glycidyldimethacrylate (BisGMA), triethyleneglycol dimethacrylate (TEGDMA), 2-hydroxyethyl methacrylate (HEMA) and methyl methacrylate (MMA) found in elution experiments can cause DNA strand breaks in human gingival fibroblasts (HGF). Such DNA damage was compared with that resulting from ionizing radiation coming from natural sources, dental radiography or tumor therapy. TEGDMA, HEMA and MMA did not induce DNA strand breaks at concentrations of up to 10 mM. About 24 h after incubation with 0.25 mM BisGMA, significantly more DNA strand breaks were found in HGF compared to controls. DNA strand breaks caused by 0.25 mM BisGMA, correspond to DNA strand breakage caused by irradiation with 4 Gy, only used in the high single-dose irradiation tumor therapy. But 0.25 mM BisGMA is more than 100-fold higher than that concentration found in worst case calculations. Therefore, our data did not support our hypothesis.