Bio-Inspired Pressure-Dependent Programmable Mechanical Metamaterial with Self-Sealing Ability.

Self-sealing is one of the fascinating functions in nature that enables living material systems to respond immediately to damage. A prime plant model is Delosperma cooperi, which can rapidly self-seal damaged succulent leaves by systematically deforming until the wound closes. Inspired by this self-sealing principle, a novel programmable mechanical metamaterial has been developed to mimic the underlying damage management concept. This material is able to react autonomously to changes in its physical condition caused by an induced damage. To design this ability into the programmable metamaterial, a permeable unit cell design has been developed that can change size depending on the internal pressure. The parameter space and associated mechanical functionality of the unit cell design is simulated and analyzed under periodic boundary conditions and various pressures. The principles of self-sealing behavior in designed metamaterials are investigated, crack closure efficiency is identified for different crack lengths, the limitations of the proposed approach are discussed, and successful crack closure is experimentally demonstrated in the fabricated metamaterial. Although this study facilitates the first step on the way of integrating new bio-inspired principles in the metamaterials, the results show how programmable mechanical metamaterials might extend materials design space from pure properties to life-like abilities.

A novel high-throughput fatigue testing method for metallic thin films.

Thin films are used in a wide variety of computing and communication applications although their fatigue behavior and its dependence on alloying elements are not very well known. In this paper, we present an experimental implementation of a novel high-throughput fatigue testing method for metallic thin films. The methodology uses the fact that the surface strain amplitude of a vibrating cantilever decreases linearly from the fixed end to the free end. Therefore, a thin film attached to a vibrating cantilever will experience a gradient of strain and corresponding stress amplitudes along the cantilever. Each cantilever can be used to extract a lifetime diagram by measuring the fatigue-induced damage front that progresses along the cantilever during up to 108 load cycles.

Designing Shape Morphing Behavior through Local Programming of Mechanical Metamaterials.

Shape morphing implicates that a specific condition leads to a morphing reaction. The material thus transforms from one shape to another in a predefined manner. In this paper, not only the target shape but rather the evolution of the material's shape as a function of the applied strain is programmed. To rationalize the design process, concepts from informatics (processing functions, for example, Poisson's ratio (PR) as function of strain: ν = f(ε) and if-then-else conditions) will be introduced. Three types of shape morphing behavior will be presented: (1) achieving a target shape by linearly increasing the amplitude of the shape, (2) filling up a target shape in linear steps, and (3) shifting a bulge through the material to a target position. In the first case, the shape is controlled by a geometric gradient within the material. The filling kind of behavior was implemented by logical operations. Moreover, programming moving hillocks (3) requires to implement a sinusoidal function εy  = sin (εx ) and an if-then-else statement into the unit cells combined with a global stiffness gradient. The three cases will be used to show how the combination of mechanical mechanisms as well as the related parameter distribution enable a programmable shape morphing behavior in an inverse design process.

Mechanoregulation of Bone Remodeling and Healing as Inspiration for Self-Repair in Materials.

The material bone has attracted the attention of material scientists due to its fracture resistance and ability to self-repair. A mechanoregulated exchange of damaged bone using newly synthesized material avoids the accumulation of fatigue damage. This remodeling process is also the basis for structural adaptation to common loading conditions, thereby reducing the probability of material failure. In the case of fracture, an initial step of tissue formation is followed by a mechanobiological controlled restoration of the pre-fracture state. The present perspective focuses on these mechanobiological aspects of bone remodeling and healing. Specifically, the role of the control function is considered, which describes mechanoregulation as a link between mechanical stimulation and the local response of the material through changes in structure or material properties. Mechanical forces propagate over large distances leading to a complex non-local feedback between mechanical stimulation and material response. To better understand such phenomena, computer models are often employed. As expected from control theory, negative and positive feedback loops lead to entirely different time evolutions, corresponding to stable and unstable states of the material system. After some background information about bone remodeling and healing, we describe a few representative models, the corresponding control functions, and their consequences. The results are then discussed with respect to the potential design of synthetic materials with specific self-repair properties.

Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography.

Dip-in direct-laser-writing (DLW) optical lithography allows fabricating complex three-dimensional microstructures without the height restrictions of regular DLW. Bow-tie elements assembled into mechanical metamaterials with positive/zero/negative Poisson's ratio and with sufficient overall size for direct mechanical characterization aim at demonstrating the new possibilities with respect to rationally designed effective materials.