Construction of Hierarchical Films via Layer-by-Layer Assembly of Exfoliated Unilamellar Zeolite Nanosheets.

Zeolites have been widely applied as versatile catalysts, sorbents, and ion exchangers with unique porous structures showing molecular sieving capability. In these years, it is reported that some layered zeolites can be delaminated into molecularly thin 2-dimensional (2D) nanosheets characterized by inherent porous structures and highly exposed active sites. In the present study, two types of zeolite nanosheets with distinct porous structures with MWW topology (denoted mww) and ferrierite-related structure (denoted bifer) are deposited on a substrate through the solution process via electrostatic self-assembly. Alternate deposition of zeolite nanosheets with polycation under optimized conditions allows the layer-by-layer growth of their multilayer films with a stacking distance of 2-3 nm. Furthermore, various hierarchical structures defined at the unit-cell dimensions can be constructed simply by conducting the deposition of mww and bifer nanosheets in a designed sequence. Adsorption of a dye, Rhodamine B, in these films, is examined to show that adsorption is dependent on constituent zeolite nanosheets and their assembled nanostructures. This work has provided fundamental advancements in the fabrication of artificial zeolite-related hierarchical structures, which may be extended to other zeolite nanosheets, broadening their functionalities, applications, and benefits.

Ultrahigh Energy Storage in 2D High-κ Perovskites.

Dielectric capacitors have greater power densities than batteries, and, unlike batteries, they do not utilize chemical reactions during cycling. Thus, they can become ideal, safe energy storage devices. However, dielectric capacitors yield rather low energy densities compared with other energy storage devices such as batteries and supercapacitors. Here, we present a rational approach for designing ultrahigh energy storage capacitors using two-dimensional (2D) high-κ dielectric perovskites (Ca2Nam-3NbmO3m+1; m = 3-6). Individual Ca2Nam-3NbmO3m+1 nanosheets exhibit an ultrahigh dielectric strength (638-1195 MV m-1) even in the monolayer form, which exceeds those of conventional dielectric materials. Multilayer stacked nanosheet capacitors exhibit ultrahigh energy densities (174-272 J cm-3), high efficiencies (>90%), excellent reliability (>107 cycles), and temperature stability (-50-300 °C); the maximum energy density is much higher than those of conventional dielectric materials and even comparable to those of lithium-ion batteries. Enhancing the energy density may make dielectric capacitors more competitive with batteries.

Exfoliated Ferrierite-Related Unilamellar Nanosheets in Solution and Their Use for Preparation of Mixed Zeolite Hierarchical Structures.

Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.

An anisotropic hydrogel with electrostatic repulsion between cofacially aligned nanosheets.

Machine technology frequently puts magnetic or electrostatic repulsive forces to practical use, as in maglev trains, vehicle suspensions or non-contact bearings. In contrast, materials design overwhelmingly focuses on attractive interactions, such as in the many advanced polymer-based composites, where inorganic fillers interact with a polymer matrix to improve mechanical properties. However, articular cartilage strikingly illustrates how electrostatic repulsion can be harnessed to achieve unparalleled functional efficiency: it permits virtually frictionless mechanical motion within joints, even under high compression. Here we describe a composite hydrogel with anisotropic mechanical properties dominated by electrostatic repulsion between negatively charged unilamellar titanate nanosheets embedded within it. Crucial to the behaviour of this hydrogel is the serendipitous discovery of cofacial nanosheet alignment in aqueous colloidal dispersions subjected to a strong magnetic field, which maximizes electrostatic repulsion and thereby induces a quasi-crystalline structural ordering over macroscopic length scales and with uniformly large face-to-face nanosheet separation. We fix this transiently induced structural order by transforming the dispersion into a hydrogel using light-triggered in situ vinyl polymerization. The resultant hydrogel, containing charged inorganic structures that align cofacially in a magnetic flux, deforms easily under shear forces applied parallel to the embedded nanosheets yet resists compressive forces applied orthogonally. We anticipate that the concept of embedding anisotropic repulsive electrostatics within a composite material, inspired by articular cartilage, will open up new possibilities for developing soft materials with unusual functions.

Scalable Design of Two-Dimensional Oxide Nanosheets for Construction of Ultrathin Multilayer Nanocapacitor.

Large size of capacitors is the main hurdle in miniaturization of current electronic devices. Herein, a scalable solution-based layer-by-layer engineering of metallic and high-κ dielectric nanosheets into multilayer nanosheet capacitors (MNCs) with overall thickness of ≈20 nm is presented. The MNCs are built through neat tiling of 2D metallic Ru0.95 O2 0.2- and high-κ dielectric Ca2 NaNb4 O13 - nanosheets via the Langmuir-Blodgett (LB) approach at room temperature which is verified by cross-sectional high-resolution transmission electron microscopy (HRTEM). The resultant MNCs demonstrate a high capacitance of 40-52 µF cm-2 and low leakage currents down to 10-5 -10-6 A cm-2 . Such MNCs also possess complimentary in situ robust dielectric properties under high-temperature measurements up to 250 °C. Based on capacitance normalized by the thickness, the developed MNC outperforms state-of-the-art multilayer ceramic capacitors (MLCC, ≈22 µF cm-2 /5 × 104  nm) present in the market. The strategy is effective due to the advantages of facile, economical, and ambient temperature solution assembly.

Reversible Switching of the Magnetic Orientation of Titanate Nanosheets by Photochemical Reduction and Autoxidation.

Optical properties of aqueous colloidal dispersions of 2D electrolytes, if their aspect ratios are extra-large, can be determined by their orientation preferences. Recently, we reported that a colloidal dispersion of diamagnetic titanate(IV) nanosheets (TiIVNSs), when placed in a magnetic field, is highly anisotropic because TiIVNS anomalously orients its 2D plane orthogonal to the magnetic flux lines due to its large anisotropic magnetic susceptibility. Herein, we report a serendipitous finding that TiIVNSs can be in situ photochemically reduced into a paramagnetic species (TiIV/IIINSs), so that their preference of magnetic orientation changes from orthogonal to parallel. This transition distinctly alters the structural anisotropy and therefore optical appearance of the colloidal dispersion in a magnetic field. We also found that TiIV/IIINSs is autoxidized back to TiIVNSs under non-deaerated conditions. By using an elaborate setup, the dispersion of TiIVNSs serves as an optical switch remotely operable by magnet and light.

Extra-Large Mechanical Anisotropy of a Hydrogel with Maximized Electrostatic Repulsion between Cofacially Aligned 2D Electrolytes.

In our previous work, we have shown that "electrostatic forces", when generated anisotropically in aqueous media by 2D electrolytes upon cofacial orientation, enable the formation of a hydrogel with an anisotropic parameter, as defined by the ratio of elastic moduli E⊥ /E∥ , of 3.0. Herein, we successfully developed the design strategy for a hydrogel with an anisotropic parameter of no less than 85. This value is not only 28 times greater than that of our previous anisotropic hydrogel but also 6 times larger than the current champion record in synthetic hydrogels (E⊥ /E∥ ∼15). Firstly, we simply lowered ionic contaminants in the hydrogel and were able to enhance the anisotropic parameter from 3.0 to 18. Then, we chose a supporting polymer network allowing the hydrogel to carry a higher interior permittivity. Consequently, the anisotropic parameter was further enhanced from 18 to 85. Owing to the enhanced mechanical anisotropy, our new hydrogel displayed a superb ability of seismic isolation.

An Anisotropic Hydrogel Actuator Enabling Earthworm-Like Directed Peristaltic Crawling.

Peristaltic crawling, which is the moving mechanism of earthworm-like limbless creatures in narrow spaces, is a challenging target to mimic by using soft materials. Here we report an unprecedented hydrogel actuator that enables not only a peristaltic crawling motion but also reversing its direction. Our cylindrically processed hydrogel contains gold nanoparticles for photothermal conversion, a thermoresponsive polymer network for switching the electrical permittivity of the gel interior, and cofacially oriented 2D electrolytes (titanate nanosheets; TiNSs) to synchronously change their anisotropic electrostatic repulsion. When a hydrogel, which was designed to include cofacially oriented TiNSs along the cylindrical gel axis, is pointwisely photoirradiated with a visible-light laser, it spatiotemporally expands immediately (<0.5 s) and largely (80 % of its original length) in an isovolumetric manner. When the irradiation spot is moved along the cylindrical gel axis, the hydrogel undergoes peristaltic crawling due to quick and sequential elongation/contraction events and moves oppositely toward the laser scanning direction. Thus, when the scanning direction is switched, the crawling direction is reversed. When gold nanorods are used in place of gold nanoparticles, the hydrogel becomes responsive to a near-infrared light, which can deeply penetrate into bio tissues.

Atomic Layer Engineering of High-κ Ferroelectricity in 2D Perovskites.

Complex perovskite oxides offer tremendous potential for controlling their rich variety of electronic properties, including high-TC superconductivity, high-κ ferroelectricity, and quantum magnetism. Atomic-scale control of these intriguing properties in ultrathin perovskites is an important challenge for exploring new physics and device functionality at atomic dimensions. Here, we demonstrate atomic-scale engineering of dielectric responses using two-dimensional (2D) homologous perovskite nanosheets (Ca2Nam-3NbmO3m+1; m = 3-6). In this homologous 2D material, the thickness of the perovskite layers can be incrementally controlled by changing m, and such atomic layer engineering enhances the high-κ dielectric response and local ferroelectric instability. The end member (m = 6) attains a high dielectric constant of ∼470, which is the highest among all known dielectrics in the ultrathin region (<10 nm). These results provide a new strategy for achieving high-κ ferroelectrics for use in ultrascaled high-density capacitors and post-graphene technology.

Coexistence of Magnetic Order and Ferroelectricity at 2D Nanosheet Interfaces.

Multiferroic materials, in which the electronic polarization can be switched by a magnetic field and vice versa, are of fundamental importance for new electronic technologies. However, there exist very few single-phase materials that exhibit such cross-coupling properties at room temperature, and heterostructures with a strong magnetoelectric coupling have only been made with complex techniques. Here, we present a rational design for multiferroic materials by use of a layer-by-layer engineering of 2D nanosheets. Our approach to new multiferroic materials is the artificial construction of high-quality superlattices by interleaving ferromagnetic Ti0.8Co0.2O2 nanosheets with dielectric perovskite-structured Ca2Nb3O10 nanosheets. Such an artificial structuring allows us to engineer the interlayer coupling, and the (Ti0.8Co0.2O2/Ca2Nb3O10/Ti0.8Co0.2O2) superlattices induce room-temperature ferroelectricity in the presence of the ferromagnetic order. Our technique provides a new route for tailoring artificial multiferroic materials in a highly controllable manner.

Thermoresponsive actuation enabled by permittivity switching in an electrostatically anisotropic hydrogel.

Electrostatic repulsion, long used for attenuating surface friction, is not typically employed for the design of bulk structural materials. We recently developed a hydrogel with a layered structure consisting of cofacially oriented electrolyte nanosheets. Because this unusual geometry imparts a large anisotropic electrostatic repulsion to the hydrogel interior, the hydrogel resisted compression orthogonal to the sheets but readily deformed along parallel shear. Building on this concept, here we show a hydrogel actuator that operates by modulating its anisotropic electrostatics in response to changes of electrostatic permittivity associated with a lower critical solution temperature transition. In the absence of substantial water uptake and release, the distance between the nanosheets rapidly expands and contracts on heating and cooling, respectively, so that the hydrogel lengthens and shortens significantly, even in air. An L-shaped hydrogel with an oblique nanosheet configuration can thus act as a unidirectionally proceeding actuator that operates without the need for external physical biases.

Tuning the surface charge of 2D oxide nanosheets and the bulk-scale production of superlatticelike composites.

The surface charge of various anionic unilamellar nanosheets, such as graphene oxide (GO), Ti0.87O2(0.52-), and Ca2Nb3O10(-) nanosheets, has been successfully modified to be positive by interaction with polycations while maintaining a monodispersed state. A dilute anionic nanosheet suspension was slowly added dropwise into an aqueous solution of high molecular weight polycations, which attach on the surface of the anionic nanosheets via electrostatic interaction. Surface modification and transformation to positively charged nanosheets were confirmed by various characterizations including atomic force microscopy and zeta potential measurements. Because the sizes of the polycations used are much larger than the nanosheets, the polymer chains may run off the nanosheet edges and fold to the fronts of the nanosheets, which could be a reason for the continued dispersion of the modified nanosheets in the suspension. By slowly adding a suspension of polycation-modified nanosheets and pristine anionic nanosheet dropwise into water under suitable conditions, a superlatticelike heteroassembly can be readily produced. Characterizations including transmission electron microscopy and X-ray diffraction measurements provide evidence for the formation of the alternately stacked structures. This approach enables the combination of various pairs of anionic nanosheets with different functionalities, providing a new opportunity for the creation of unique bulk-scale functional materials and their applications.

Artificial design for new ferroelectrics using nanosheet-architectonics concept.

Control over the emergence of ferroelectric order remains a fundamental challenge for the rational design of artificial materials with novel properties. Here we report a new strategy for artificial design of layered perovskite ferroelectrics by using oxide nanosheets (high-k dielectric Ca2Nb3O10 and insulating Ti0.87O2) as a building block. We approached the preparation of superlattice films by a layer-by-layer assembly involving Langmuir-Blodgett deposition. The artificially fabricated (Ti0.87O2/Ca2Nb3O10)2(Ti0.87O2) superlattices are structurally unique, which is not feasible to create in the bulk form. By such an artificial structuring, we found that (Ti0.87O2/Ca2Nb3O10)2(Ti0.87O2) superlattices possess a new form of interface coupling, which gives rise to ferroelectricity with a good fatigue-free characteristic. Considering the flexibility of self-assembled nanosheet interfaces, this technique provides a route to synthesize a new kind of layered ferroelectric oxides.

Gigantic swelling of inorganic layered materials: a bridge to molecularly thin two-dimensional nanosheets.

Platy microcrystals of a typical layered material, protonated titanate, have been shown to undergo an enormous degree of swelling in aqueous solutions of various amines, including tertiary amines, quaternary ammonium hydroxides, and primary amines. Introducing these solutions expanded the crystal gallery height by up to ~100-fold. Through systematic analysis, we determined that ammonium ion intercalation is predominantly affected by the acid-base equilibrium and that the degree of swelling or inflow of H2O is controlled by the osmotic pressure balance between the gallery and the solution environment, both of which are relatively independent of electrolyte identity but substantially dependent on molarity. In solutions of tertiary amines and quaternary ammonium hydroxides, the uptake of ammonium ions increases nearly linearly with increasing external concentration before reaching a saturation plateau, i.e., ~40% relative to the cation-exchange capacity of the crystals used. The only exception is tetrabutylammonium ions, which yield a lower saturation value, ~30%, owing to steric effects. The swelling behaviors in some primary amine solutions differ as a result of the effect of attractive forces between amine solute molecules on the solution osmotic pressure. Although the swelling is essentially colligative in nature, the stability of the resultant swollen structure is heavily dependent on the chemical nature of the guest ions. Intercalated ions of higher polarity and smaller size help stabilize the swollen structure, whereas ions of lower polarity and larger size lead readily to exfoliation. The insight gained from this study sheds new light on both the incorporation of guest molecules into a gallery of layered structures in general and the exfoliation of materials into elementary single-layer nanosheets.

Soft-chemical exfoliation of RbSrNb2O6F into homogeneously unilamellar oxyfluoride nanosheets.

Interlayer Rb(+) of the perovskite-type layered oxyfluoride RbSrNb(2)O(6)F was ion-exchanged with H(+), and the protonated phase was reacted with aqueous solution of tetrabutylammonium hydroxide to exfoliate it into nanosheets. The resulting nanosheet suspension exhibits Tyndall scattering of a laser beam, indicating its colloidal nature. Elemental composition of the nanosheet was estimated as Sr(0.98)Nb(2)O(6)F(0.97)(δ-), which was quite close to that of the layer unit of the precursor. The homogeneously unilamellar nature of this nanosheet was confirmed by atomic force and transmission electron microscopy observations and X-ray scattering results. The optical absorption edge of the nanosheet suspension was observed around at 293 nm, and two well-defined peaks with their maxima at 229 and 278 nm were observed. Furthermore, the aqueous suspension of the nanosheet exhibits fluorescence emission in the UV-blue region. These properties of the oxyfluoride nanosheets are quite different from those of its oxide analogues without F(-), such as LnNb(2)O(7)(-) nanosheets (Ln = La(3+), Eu(3+), Sm(3+)), suggesting that anion-site replacement of oxide nanosheets can be utilized to optimize or induce various properties.

New family of lanthanide-based inorganic-organic hybrid frameworks: Ln2(OH)4[O3S(CH2)nSO3]·2H2O (Ln = La, Ce, Pr, Nd, Sm; n = 3, 4) and their derivatives.

We report the synthesis and structure characterization of a new family of lanthanide-based inorganic-organic hybrid frameworks, Ln(2)(OH)(4)[O(3)S(CH(2))(n)SO(3)]·2H(2)O (Ln = La, Ce, Pr, Nd, Sm; n = 3, 4), and their oxide derivatives. Highly crystallized samples were synthesized by homogeneous precipitation of Ln(3+) ions from a solution containing α,ω-organodisulfonate salts promoted by slow hydrolysis of hexamethylenetetramine. The crystal structure solved from powder X-ray diffraction data revealed that this material comprises two-dimensional cationic lanthanide hydroxide {[Ln(OH)(2)(H(2)O)](+)}(∞) layers, which are cross-linked by α,ω-organodisulfonate ligands into a three-dimensional pillared framework. This hybrid framework can be regarded as a derivative of UCl(3)-type Ln(OH)(3) involving penetration of organic chains into two {LnO(9)} polyhedra. Substitutional modification of the lanthanide coordination promotes a 2D arrangement of the {LnO(9)} polyhedra. A new hybrid oxide, Ln(2)O(2)[O(3)S(CH(2))(n)SO(3)], which is supposed to consist of alternating {[Ln(2)O(2)](2+)}(∞) layers and α,ω-organodisulfonate ligands, can be derived from the hydroxide form upon dehydration/dehydroxylation. These hybrid frameworks provide new opportunities to engineer the interlayer chemistry of layered structures and achieve advanced functionalities coupled with the advantages of lanthanide elements.

Fabrication of ruthenium metal nanosheets via topotactic metallization of exfoliated ruthenate nanosheets.

The metallization behavior of molecularly thin RuO2 nanosheets obtained from complete delamination of layered ruthenates was studied. Interestingly, the RuO2 nanosheets in a monolayer state topotactically transformed into a single layer of Ru atoms, i.e., ruthenium metal nanosheets, which can be regarded as a new family of nanosized metals.

Thermal and Chemical Phase Engineering of Two-Dimensional Ruthenate.

Monolayer ruthenate nanosheets obtained by exfoliating layered ruthenium oxide exhibit excellent electrical conductivity, redox activity, and catalytic activity, which render them suitable for advanced electronic and energy devices. However, to fully exploit the benefits, we require further structural insights into a complex polymorphic nature and diversity in relevant electronic states of two-dimensional (2D) ruthenate systems. In this study, the 2D structures, stability, and electronic states of 2D ruthenate are investigated on the basis of thermal and chemical phase engineering approaches. We reveal that contrary to a previous report, exfoliation of an oblique 1T phase precursor leads to nanosheets having an identical phase without exfoliation-induced phase transition to a 1H phase. The oblique 1T phase in the nanosheets is found to be metastable and, thus, transforms successively to a rectangular 1T phase upon heating. A phase-controllable synthesis via Co doping affords nanosheets with metastable rectangular and thermally stable hexagonal 1T phases at a Co content of 5-10 and 20 at%, respectively. The 1T phases show metallic electronic states, where the d-d optical transitions between the Ru 4d (t2g) orbital depend on the symmetry of the Ru framework. The Co doping in ruthenate nanosheets unexpectedly suppresses the redox and catalytic activities under acidic conditions. In contrast, the Co2+/3+ redox pair is activated and produces conductive nanosheets with high electrochemical capacitance in an alkaline condition.

Photochromogenic nanosheet crystallites of tungstate with a 2D bronze structure.

Layered rubidium tungstate, Rb(4)W(11)O(35), with a two-dimensional (2D) bronze-type tunnel structure was successfully delaminated into colloidal nanosheets via a soft-chemical process involving acid exchange and subsequent intercalation of tetrabutylammonium ions. Characterizations by transmission electron microscopy and atomic force microscopy confirmed the formation of unilamellar 2D nanosheet crystallites with a unique thickness of ∼3 nm and an average lateral size of 400 nm. The obtained nanosheets exhibited reversible color change upon UV-light excitation via an optical band gap of 3.5 eV. The ultimate 2D aspect ratio favorable for an adsorption of charge-compensating cations to trapped electrons working as a color center is presumably responsible for highly efficient photochromic behavior. Its coloration mainly consists of a broad band at a wavelength of 1800 nm and longer, which is much different from that of the common tungstate nanomaterials. Thus, the chromogenic nanosheet obtained in this study features the intense UV absorption and optically switchable visible-to-IR absorption, which may be useful for window applications such as cutoff filters and heat-absorbing films.

Accelerated Ionic and Charge Transfer through Atomic Interfacial Electric Fields for Superior Sodium Storage.

Atomic interfacial electric fields hold great potential for boosting ionic and charge transfer and accelerating electrochemical reaction kinetics. Here, built-in electric fields within the heterostructure are created by electrostatic assembly of unilamellar titano-niobate/graphene (reduced graphene oxide) nanosheets as building blocks. Scanning Kelvin probe microscopy confirms the existence of built-in electric fields by detecting the unbalanced surface potential of disparate nanosheets in the heterostructure, which facilitates ion and electron transfer, thus enabling an excellent reversible sodium storage capacity of 245 mAh g-1 at 0.05 A g-1. Theoretical analysis also confirms that the electric field can enhance the electric conductivity and facilitate electron transfer at the atomic interface. Moreover, in situ TEM observations confirm the homogeneous intercalation of sodium ions and very small volume expansion of the hybrid materials. As a result, a highly stable lifetime of 3000 cycles is achieved with capacity retention of 98.8%. This work attests the importance of accelerating ionic and charge transfer through atomic interfacial electric field for superior sodium storage.