Superalkali-Alkalide Interactions and Ion Pairing in Low-Polarity Solvents.

The nature of anionic alkali metals in solution is traditionally thought to be "gaslike" and unperturbed. In contrast to this noninteracting picture, we present experimental and computational data herein that support ion pairing in alkalide solutions. Concentration dependent ionic conductivity, dielectric spectroscopy, and neutron scattering results are consistent with the presence of superalkali-alkalide ion pairs in solution, whose stability and properties have been further investigated by DFT calculations. Our temperature dependent alkali metal NMR measurements reveal that the dynamics of the alkalide species is both reversible and thermally activated suggesting a complicated exchange process for the ion paired species. The results of this study go beyond a picture of alkalides being a "gaslike" anion in solution and highlight the significance of the interaction of the alkalide with its complex countercation (superalkali).

The periodic law of the chemical elements: 'The new system of atomic weights which renders evident the analogies which exist between bodies' [1].

The historical roots, the discovery and the modern relevance of Dmitri Mendeleev's remarkable advance have been the subject of numerous scholarly works. Here, with a brief overview, we hope to provide a link into the contents of this special issue honouring the great scientist. Mendeleev's advance, announced in March 1869, as he put it in 1889, to the '…then youthful Russian Chemical Society…', first set out the very basis of the periodic law of the chemical elements, the natural relation between the properties of the elements and their atomic weights. This was, and still is, the centrepiece of a historical journey for chemistry to today's position as a pre-eminent science. This article is part of the theme issue 'Mendeleev and the periodic table'.

Metals and non-metals in the periodic table.

The demarcation of the chemical elements into metals and non-metals dates back to the dawn of Dmitri Mendeleev's construction of the periodic table; it still represents the cornerstone of our view of modern chemistry. In this contribution, a particular emphasis will be attached to the question 'Why do the chemical elements of the periodic table exist either as metals or non-metals under ambient conditions?' This is perhaps most apparent in the p-block of the periodic table where one sees an almost-diagonal line separating metals and non-metals. The first searching, quantum-mechanical considerations of this question were put forward by Hund in 1934. Interestingly, the very first discussion of the problem-in fact, a pre-quantum-mechanical approach-was made earlier, by Goldhammer in 1913 and Herzfeld in 1927. Their simple rationalization, in terms of atomic properties which confer metallic or non-metallic status to elements across the periodic table, leads to what is commonly called the Goldhammer-Herzfeld criterion for metallization. For a variety of undoubtedly complex reasons, the Goldhammer-Herzfeld theory lay dormant for close to half a century. However, since that time the criterion has been repeatedly applied, with great success, to many systems and materials exhibiting non-metal to metal transitions in order to predict, and understand, the precise conditions for metallization. Here, we review the application of Goldhammer-Herzfeld theory to the question of the metallic versus non-metallic status of chemical elements within the periodic system. A link between that theory and the work of Sir Nevill Mott on the metal-non-metal transition is also highlighted. The application of the 'simple', but highly effective Goldhammer-Herzfeld and Mott criteria, reveal when a chemical element of the periodic table will behave as a metal, and when it will behave as a non-metal. The success of these different, but converging approaches, lends weight to the idea of a simple, universal criterion for rationalizing the instantly-recognizable structure of the periodic table where …the metals are here, the non-metals are there … The challenge of the metallic and non-metallic states of oxides is also briefly introduced. This article is part of the theme issue 'Mendeleev and the periodic table'.

Electron Solvation and the Unique Liquid Structure of a Mixed-Amine Expanded Metal: The Saturated Li-NH3 -MeNH2 System.

Metal-amine solutions provide a unique arena in which to study electrons in solution, and to tune the electron density from the extremes of electrolytic through to true metallic behavior. The existence and structure of a new class of concentrated metal-amine liquid, Li-NH3 -MeNH2 , is presented in which the mixed solvent produces a novel type of electron solvation and delocalization that is fundamentally different from either of the constituent systems. NMR, ESR, and neutron diffraction allow the environment of the solvated electron and liquid structure to be precisely interrogated. Unexpectedly it was found that the solution is truly homogeneous and metallic. Equally surprising was the observation of strong longer-range order in this mixed solvent system. This is despite the heterogeneity of the cation solvation, and it is concluded that the solvated electron itself acts as a structural template. This is a quite remarkable observation, given that the liquid is metallic.

Rapid Production of High-Purity Hydrogen Fuel through Microwave-Promoted Deep Catalytic Dehydrogenation of Liquid Alkanes with Abundant Metals.

Hydrogen as an energy carrier promises a sustainable energy revolution. However, one of the greatest challenges for any future hydrogen economy is the necessity for large scale hydrogen production not involving concurrent CO2 production. The high intrinsic hydrogen content of liquid-range alkane hydrocarbons (including diesel) offers a potential route to CO2 -free hydrogen production through their catalytic deep dehydrogenation. We report here a means of rapidly liberating high-purity hydrogen by microwave-promoted catalytic dehydrogenation of liquid alkanes using Fe and Ni particles supported on silicon carbide. A H2 production selectivity from all evolved gases of some 98 %, is achieved with less than a fraction of a percent of adventitious CO and CO2 . The major co-product is solid, elemental carbon.

On the occurrence of metallic character in the periodic table of the chemical elements.

The classification of a chemical element as either 'metal' or 'non-metal' continues to form the basis of an instantly recognizable, universal representation of the periodic table (Mendeleeff D. 1905 The principles of chemistry, vol. II, p. 23; Poliakoff M. & Tang S. 2015 Phil. Trans. R. Soc. A 373: , 20140211). Here, we review major, pre-quantum-mechanical innovations (Goldhammer DA. 1913 Dispersion und Absorption des Lichtes; Herzfeld KF. 1927 Phys. Rev. 29: , 701-705) that allow an understanding of the metallic or non-metallic status of the chemical elements under both ambient and extreme conditions. A special emphasis will be placed on recent experimental advances that investigate how the electronic properties of chemical elements vary with temperature and density, and how this invariably relates to a changing status of the chemical elements. Thus, the prototypical non-metals, hydrogen and helium, becomes metallic at high densities; and the acknowledged metals, mercury, rubidium and caesium, transform into their non-metallic forms at low elemental densities. This reflects the fundamental fact that, at temperatures above the absolute zero of temperature, there is therefore no clear dividing line between metals and non-metals. Our conventional demarcation of chemical elements as metals or non-metals within the periodic table is of course governed by our experience of the nature of the elements under ambient conditions. Examination of these other situations helps us to examine the exact divisions of the chemical elements into metals and non-metals (Mendeleeff D. 1905 The principles of chemistry, vol. II, p. 23).

Superconductivity in transition metals.

A qualitative account of the occurrence and magnitude of superconductivity in the transition metals is presented, with a primary emphasis on elements of the first row. Correlations of the important parameters of the Bardeen-Cooper-Schrieffer theory of superconductivity are highlighted with respect to the number of d-shell electrons per atom of the transition elements. The relation between the systematics of superconductivity in the transition metals and the periodic table high-lights the importance of short-range or chemical bonding on the remarkable natural phenomenon of superconductivity in the chemical elements. A relationship between superconductivity and lattice instability appears naturally as a balance and competition between localized covalent bonding and so-called broken covalency, which favours d-electron delocalization and superconductivity. In this manner, the systematics of superconductivity and various other physical properties of the transition elements are related and unified.

In situ X-ray powder diffraction studies of hydrogen storage and release in the Li-N-H system.

We report the experimental investigation of hydrogen storage and release in the lithium amide-lithium hydride composite (Li-N-H) system. Investigation of hydrogenation and dehydrogenation reactions of the system through in situ synchrotron X-ray powder diffraction experiments allowed for the observation of the formation and evolution of non-stoichiometric intermediate species of the form Li1+xNH2-x. This result is consistent with the proposed Frenkel-defect mechanism for these reactions. We observed capacity loss with decreasing temperature through decreased levels of lithium-rich (0.7 ≤ x ≤ 1.0) non-stoichiometric phases in the dehydrogenated material, but only minor changes due to multiple cycles at the same temperature. Annealing of dehydrogenated samples reveals the reduced stability of intermediate stoichiometry values (0.4 ≤ x ≤ 0.7) compared with the end member species: lithium amide (LiNH2) and lithium imide (Li2NH). Our results highlight the central role of ionic mobility in understanding temperature limitations, capacity loss and facile reversibility of the Li-N-H system.

Microwave absorption in powders of small conducting particles for heating applications.

In microwave chemistry there is a common misconception that small, highly conducting particles heat profusely when placed in a large microwave electric field. However, this is not the case; with the simple physical explanation that the electric field (which drives the heating) within a highly conducting particle is highly screened. Instead, it is the magnetic absorption associated with induction that accounts for the large experimental heating rates observed for small metal particles. We present simple principles for the effective heating of particles in microwave fields from calculations of electric and magnetic dipole absorptions for a range of practical values of particle size and conductivity. For highly conducting particles, magnetic absorption dominates electric absorption over a wide range of particle radii, with an optimum absorption set by the ratio of mean particle radius a to the skin depth δ (specifically, by the condition a = 2.41δ). This means that for particles of any conductivity, optimized magnetic absorption (and hence microwave heating by magnetic induction) can be achieved by simple selection of the mean particle size. For weakly conducting samples, electric dipole absorption dominates, and is maximized when the conductivity is approximately σ ≈ 3ωε(0) ≈ 0.4 S m(-1), independent of particle radius. Therefore, although electric dipole heating can be as effective as magnetic dipole heating for a powder sample of the same volume, it is harder to obtain optimized conditions at a fixed frequency of microwave field. The absorption of sub-micron particles is ineffective in both magnetic and electric fields. However, if the particles are magnetic, with a lossy part to their complex permeability, then magnetic dipole losses are dramatically enhanced compared to their values for non-magnetic particles. An interesting application of this is the use of very small magnetic particles for the selective microwave heating of biological samples.

Electron tunneling in lithium-ammonia solutions probed by frequency-dependent electron spin relaxation studies.

Electron transfer or quantum tunneling dynamics for excess or solvated electrons in dilute lithium-ammonia solutions have been studied by pulse electron paramagnetic resonance (EPR) spectroscopy at both X- (9.7 GHz) and W-band (94 GHz) frequencies. The electron spin-lattice (T(1)) and spin-spin (T(2)) relaxation data indicate an extremely fast transfer or quantum tunneling rate of the solvated electron in these solutions which serves to modulate the hyperfine (Fermi-contact) interaction with nitrogen nuclei in the solvation shells of ammonia molecules surrounding the localized, solvated electron. The donor and acceptor states of the solvated electron in these solutions are the initial and final electron solvation sites found before, and after, the transfer or tunneling process. To interpret and model our electron spin relaxation data from the two observation EPR frequencies requires a consideration of a multiexponential correlation function. The electron transfer or tunneling process that we monitor through the correlation time of the nitrogen Fermi-contact interaction has a time scale of (1-10) × 10(-12) s over a temperature range 230-290 K in our most dilute solution of lithium in ammonia. Two types of electron-solvent interaction mechanisms are proposed to account for our experimental findings. The dominant electron spin relaxation mechanism results from an electron tunneling process characterized by a variable donor-acceptor distance or range (consistent with such a rapidly fluctuating liquid structure) in which the solvent shell that ultimately accepts the transferring electron is formed from random, thermal fluctuations of the liquid structure in, and around, a natural hole or Bjerrum-like defect vacancy in the liquid. Following transfer and capture of the tunneling electron, further solvent-cage relaxation with a time scale of ∼10(-13) s results in a minor contribution to the electron spin relaxation times. This investigation illustrates the great potential of multifrequency EPR measurements to interrogate the microscopic nature and dynamics of ultrafast electron transfer or quantum-tunneling processes in liquids. Our results also impact on the universal issue of the role of a host solvent (or host matrix, e.g. a semiconductor) in mediating long-range electron transfer processes and we discuss the implications of our results with a range of other materials and systems exhibiting the phenomenon of electron transfer.

A review of catalytic hydrogenation of carbon dioxide: From waste to hydrocarbons.

With the rapid development of industrial society and humankind's prosperity, the growing demands of global energy, mainly based on the combustion of hydrocarbon fossil fuels, has become one of the most severe challenges all over the world. It is estimated that fossil fuel consumption continues to grow with an annual increase rate of 1.3%, which has seriously affected the natural environment through the emission of greenhouse gases, most notably carbon dioxide (CO2). Given these recognized environmental concerns, it is imperative to develop clean technologies for converting captured CO2 to high-valued chemicals, one of which is value-added hydrocarbons. In this article, environmental effects due to CO2 emission are discussed and various routes for CO2 hydrogenation to hydrocarbons including light olefins, fuel oils (gasoline and jet fuel), and aromatics are comprehensively elaborated. Our emphasis is on catalyst development. In addition, we present an outlook that summarizes the research challenges and opportunities associated with the hydrogenation of CO2 to hydrocarbon products.

Size-Dependent Microwave Heating and Catalytic Activity of Fine Iron Particles in the Deep Dehydrogenation of Hexadecane.

Knowledge of the electromagnetic microwave radiation-solid matter interaction and ensuing mechanisms at active catalytic sites will enable a deeper understanding of microwave-initiated chemical interactions and processes, and will lead to further optimization of this class of heterogeneous catalysis. Here, we study the fundamental mechanism of the interaction between microwave radiation and solid Fe catalysts and the deep dehydrogenation of a model hydrocarbon, hexadecane. We find that the size-dependent electronic transition of particulate Fe metal from a microwave "reflector" to a microwave "absorber" lies at the heart of efficient metal catalysis in these heterogeneous processes. In this regard, the optimal particle size of a Fe metal catalyst for highly effective microwave-initiated dehydrogenation reactions is approximately 80-120 nm, and the catalytic performance is strongly dependent on the ratio of the mean radius of Fe particles to the microwave skin depth (r/δ) at the operating frequency. Importantly, the particle size of selected Fe catalysts will ultimately affect the basic heating properties of the catalysts and decisively influence their catalytic performance under microwave initiation. In addition, we have found that when two or more materials-present as a mechanical mixture-are simultaneously exposed to microwave irradiation, each constituent material will respond to the microwaves independently. Thus, the interaction between the two materials has been found to have synergistic effects, subsequently contributing to heating and improving the overall catalytic performance.

Sustainable chemical processing of flowing wastewater through microwave energy.

Iron oxide nanostructured catalysts have emerged as potential candidates for efficient energy conversion and electrochemical energy storage devices. However, synthesis and design of nanomaterial plays a key role in its performance and efficiency. Herein, we describe a one-pot solution combustion synthesis (SCS) of α-Fe2O3 with glycine as a fuel, and a subsequent reduction step to produce iron-containing catalysts (i.e., Fe3O4, Fe-Fe3O4, and Fe0). The synthesized iron-based nanoparticles were investigated for methyl orange (MO) degradation through Microwave (MW) energy under continuous flow conditions. Fe-Fe3O4 showed higher MO degradation efficiency than α-Fe2O3, Fe3O4 and Fe0 at low absorbed MW power (i.e. 5-80 W). The enhanced degradation efficiency is associated to the combination of higher availability of electron density and higher heating effect under MW energy. Investigation of dielectric properties showed relative dielectric loss of Fe3O4, Fe-Fe3O4, and Fe0 as 3847, 2010, and 1952, respectively. The calculated average local temperature by the comparative analysis of MW treatment with conventional thermal (CT) treatment showed a marked thermal effect of MW-initiated MO degradation. This work highlights the potential of microwave-driven water depollution under continuous-flow processing conditions and demonstrates the positive impact that earth-abundant Fe catalyst synthesized by green SCS method can have over the treatment of wastewater.

Nature of the band gap and origin of the conductivity of PbO2 revealed by theory and experiment.

Lead dioxide has been used for over a century in the lead-acid battery. Many fundamental questions concerning PbO2 remain unanswered, principally: (i) is the bulk material a metal or a semiconductor, and (ii) what is the source of the high levels of conductivity? We calculate the electronic structure and defect physics of PbO2, using a hybrid density functional, and show that it is an n-type semiconductor with a small indirect band gap of ∼0.2 eV. The origin of electron carriers in the undoped material is found to be oxygen vacancies, which forms a donor state resonant in the conduction band. A dipole-forbidden band gap combined with a large carrier induced Moss-Burstein shift results in a large effective optical band gap. The model is supported by neutron diffraction, which reveals that the oxygen sublattice is only 98.4% occupied, thus confirming oxygen substoichiometry as the electron source.

A combined experimental inelastic neutron scattering, Raman and ab initio lattice dynamics study of α-lithium amidoborane.

A combination of inelastic neutron scattering (INS) spectroscopy and Raman spectroscopy with periodic density functional theory calculations is used to provide a complete assignment of the vibrational spectra of α-lithium amidoborane (α-LiNH(2)BH(3)). The Born charge density and the atomic motion up to the decomposition temperature have been modelled. These models not only explain the nature of bonding in α-LiNH(2)BH(3) but also provide an insight into the atomic mechanisms of its decomposition. The (INS) measurements were performed in the range of 0-4000 cm(-1) on the high-resolution time-of-flight TOSCA INS spectrometer at the ISIS Spallation Neutron Source at the Rutherford Appleton Laboratory.

Catalytic Activity of Various Carbons during the Microwave-Initiated Deep Dehydrogenation of Hexadecane.

Carbon materials have been widely used as microwave susceptors in many chemical processes because they are highly effective at transforming incoming electromagnetic energy for local (hot spot) heating. This property raises the intriguing possibility of using the all-pervasive carbonaceous deposits in operating heterogeneous catalytic processes to augment the catalytic performance of microwave-initiated reactions. Here, the catalytic activities of a range of carbon materials, together with carbon residues produced from a "test" reaction-the dehydrogenation of hexadecane under microwave-initiated heterogeneous catalytic processes, have been investigated. Despite the excellent microwave absorption properties observed among these various carbons, only activated carbons and graphene nanoplatelets were found to be highly effective for the microwave-initiated dehydrogenation of hexadecane. During the dehydrogenation of hexadecane on a Fe/SiC catalyst, active carbon species were formed at the early stage of the reactions but were subsequently transformed into filamentous but catalytically inert carbons that ultimately deactivated the operating catalyst.

Potassium(I) amidotrihydroborate: structure and hydrogen release.

Potassium(I) amidotrihydroborate (KNH(2)BH(3)) is a newly developed potential hydrogen storage material representing a completely different structural motif within the alkali metal amidotrihydroborate group. Evolution of 6.5 wt % hydrogen starting at temperatures as low as 80 degrees C is observed and shows a significant change in the hydrogen release profile, as compared to the corresponding lithium and sodium compounds. Here we describe the synthesis, structure, and hydrogen release characteristics of KNH(2)BH(3).

Stepwise phase transition in the formation of lithium amidoborane.

A stepwise phase transition in the formation of lithium amidoborane via the solid-state reaction of lithium hydride and ammonia borane has been identified and investigated. Structural analyses reveal that a lithium amidoborane-ammonia borane complex (LiNH(2)BH(3).NH(3)BH(3)) and two allotropes of lithium amidoborane (denoted as alpha- and beta-LiNH(2)BH(3), both of which adopt orthorhombic symmetry) were formed in the process of synthesis. LiNH(2)BH(3).NH(3)BH(3) is the intermediate of the synthesis and adopts a monoclinic structure that features layered LiNH(2)BH(3) and NH(3)BH(3) molecules and contains both ionic and dihydrogen bonds. Unlike alpha-LiNH(2)BH(3), the units of the beta phase have two distinct Li(+) and [NH(2)BH(3)](-) environments. beta-LiNH(2)BH(3) can only be observed in energetic ball milling and transforms to alpha-LiNH(2)BH(3) upon extended milling. Both allotropes of LiNH(2)BH(3) exhibit similar thermal decomposition behavior, with 10.8 wt % H(2) released when heated to 180 degrees C; in contrast, LiNH(2)BH(3).NH(3)BH(3) releases approximately 14.3 wt % H(2) under the same conditions.

Decarbonising energy: The developing international activity in hydrogen technologies and fuel cells.

Hydrogen technologies and fuel cells offer an alternative and improved solution for a decarbonised energy future. Fuel cells are electrochemical converters; transforming hydrogen (or energy sources containing hydrogen) and oxygen directly into electricity. The hydrogen fuel cell, invented in 1839, permits the generation of electrical energy with high efficiency through a non-combustion, electrochemical process and, importantly, without the emission of CO2 at its point of use. Hitherto, despite numerous efforts to exploit the obvious attractions of hydrogen technologies and hydrogen fuel cells, various challenges have been encountered, some of which are reviewed here. Now, however, given the exigent need to urgently seek low-carbon paths for humankind's energy future, numerous countries are advancing the deployment of hydrogen technologies and hydrogen fuel cells not only for transport, but also as a means of the storage of excess renewable energy from, for example, wind and solar farms. Furthermore, hydrogen is also being blended into the natural gas supplies used in domestic heating and targeted in the decarbonisation of critical, large-scale industrial processes such as steel making. We briefly review specific examples in countries such as Japan, South Korea and the People's Republic of China, as well as selected examples from Europe and North America in the utilization of hydrogen technologies and hydrogen fuel cells.