Supramolecular Modulation of Hybrid Perovskite Solar Cells via Bifunctional Halogen Bonding Revealed by Two-Dimensional 19F Solid-State NMR Spectroscopy.

There has been an ongoing effort to overcome the limitations associated with the stability of hybrid organic-inorganic perovskite solar cells by using different organic agents as additives to the perovskite formulations. The functionality of organic additives has been predominantly limited to exploiting hydrogen-bonding interactions, while the relevant atomic-level binding modes remain elusive. Herein, we introduce a bifunctional supramolecular modulator, 1,2,4,5-tetrafluoro-3,6-diiodobenzene, which interacts with the surface of the triple-cation double-halide perovskite material via halogen bonding. We elucidate its binding mode using two-dimensional solid-state 19F NMR spectroscopy in conjunction with density functional theory calculations. As a result, we demonstrate a stability enhancement of the perovskite solar cells upon supramolecular modulation, without compromising the photovoltaic performances.

Quantifying mobile ions and electronic defects in perovskite-based devices with temperature-dependent capacitance measurements: Frequency vs time domain.

Perovskites have proven to be a promising candidate for highly efficient solar cells, light-emitting diodes, and x-ray detectors, overcoming limitations of inorganic semiconductors. However, they are notoriously unstable. The main reason for this instability is the migration of mobile ions through the device during operation as they are mixed ionic-electronic conductors. Here, we show how measuring the capacitance in both the frequency and the time domain can be used to study ionic dynamics within perovskite-based devices, quantifying activation energy, diffusion coefficient, sign of charge, concentration, and the length of the ionic double layer in the vicinity of the interfaces. Measuring the transient of the capacitance furthermore allows for distinguishing between ionic and electronic effects.

A method to detect triplet exciton transfer from singlet fission materials into silicon solar cells: Comparing different surface treatments.

Singlet fission is one of the most promising routes to overcome the single-junction efficiency limit for solar cells. Singlet fission-enhanced silicon solar cells are the most desirable implementation, but transfer of triplet excitons, the product of singlet fission, into silicon solar cells has proved to be very challenging. Here, we report on an all optical measurement technique for the detection of triplet exciton quenching at semiconductor interfaces, a necessary requirement for triplet exciton or charge transfer. The method relies on the growth of individual, single-crystal islands of the singlet fission material on the silicon surface. The islands have different heights, and we correlate these heights to the quenching efficiency of triplet excitons. The quenching efficiency is measured by spatially resolved delayed fluorescence and compared to a diffusion-quenching model. Using silicon capped with a blocking thermal oxide and aromatic monolayers, we demonstrate that this technique can quickly screen different silicon surface treatments for triplet exciton quenching.

Lead Telluride Quantum Dot Solar Cells Displaying External Quantum Efficiencies Exceeding 120%.

Multiple exciton generation (MEG) in semiconducting quantum dots is a process that produces multiple charge-carrier pairs from a single excitation. MEG is a possible route to bypass the Shockley-Queisser limit in single-junction solar cells but it remains challenging to harvest charge-carrier pairs generated by MEG in working photovoltaic devices. Initial yields of additional carrier pairs may be reduced due to ultrafast intraband relaxation processes that compete with MEG at early times. Quantum dots of materials that display reduced carrier cooling rates (e.g., PbTe) are therefore promising candidates to increase the impact of MEG in photovoltaic devices. Here we demonstrate PbTe quantum dot-based solar cells, which produce extractable charge carrier pairs with an external quantum efficiency above 120%, and we estimate an internal quantum efficiency exceeding 150%. Resolving the charge carrier kinetics on the ultrafast time scale with pump-probe transient absorption and pump-push-photocurrent measurements, we identify a delayed cooling effect above the threshold energy for MEG.

Solution-processable singlet fission photovoltaic devices.

We demonstrate the successful incorporation of a solution-processable singlet fission material, 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene), into photovoltaic devices. TIPS-pentacene rapidly converts high-energy singlet excitons into pairs of triplet excitons via singlet fission, potentially doubling the photocurrent from high-energy photons. Low-energy photons are captured by small-bandgap electron-accepting lead chalcogenide nanocrystals. This is the first solution-processable singlet fission system that performs with substantial efficiency with maximum power conversion efficiencies exceeding 4.8%, and external quantum efficiencies of up to 60% in the TIPS-pentacene absorption range. With PbSe nanocrystal of suitable bandgap, its internal quantum efficiency reaches 170 ± 30%.

Resonant energy transfer of triplet excitons from pentacene to PbSe nanocrystals.

The efficient transfer of energy between organic and inorganic semiconductors is a widely sought after property, but has so far been limited to the transfer of spin-singlet excitons. Here we report efficient resonant-energy transfer of molecular spin-triplet excitons from organic semiconductors to inorganic semiconductors. We use ultrafast optical absorption spectroscopy to track the dynamics of triplets, generated in pentacene through singlet exciton fission, at the interface with lead selenide (PbSe) nanocrystals. We show that triplets transfer to PbSe rapidly (<1 ps) and efficiently, with 1.9 triplets transferred for every photon absorbed in pentacene, but only when the bandgap of the nanocrystals is close to resonance (±0.2 eV) with the triplet energy. Following triplet transfer, the excitation can undergo either charge separation, allowing photovoltaic operation, or radiative recombination in the nanocrystal, enabling luminescent harvesting of triplet exciton energy in light-emitting structures.

Singlet exciton fission in polycrystalline pentacene: from photophysics toward devices.

Singlet exciton fission is the process in conjugated organic molecules bywhich a photogenerated singlet exciton couples to a nearby chromophore in the ground state, creating a pair of triplet excitons. Researchers first reported this phenomenon in the 1960s, an event that sparked further studies in the following decade. These investigations used fluorescence spectroscopy to establish that exciton fission occurred in single crystals of several acenes. However, research interest has been recently rekindled by the possibility that singlet fission could be used as a carrier multiplication technique to enhance the efficiency of photovoltaic cells. The most successful architecture to-date involves sensitizing a red-absorbing photoactive layer with a blue-absorbing material that undergoes fission, thereby generating additional photocurrent from higher-energy photons. The quest for improved solar cells has spurred a drive to better understand the fission process, which has received timely aid from modern techniques for time-resolved spectroscopy, quantum chemistry, and small-molecule device fabrication. However, the consensus interpretation of the initial studies using ultrafast transient absorption spectroscopy was that exciton fission was suppressed in polycrystalline thin films of pentacene, a material that would be otherwise expected to be an ideal model system, as well as a viable candidate for fission-sensitized photovoltaic devices. In this Account, we review the results of our recent transient absorption and device-based studies of polycrystalline pentacene. We address the controversy surrounding the assignment of spectroscopic features in transient absorption data, and illustrate how a consistent interpretation is possible. This work underpins our conclusion that singlet fission in pentacene is extraordinarily rapid (∼80 fs) and is thus the dominant decay channel for the photoexcited singlet exciton. Further, we discuss our demonstration that triplet excitons generated via singlet fission in pentacene can be dissociated at an interface with a suitable electron acceptor, such as fullerenes and infrared-absorbing inorganic semiconducting quantum dots. We highlight our recent reports of a pentacene/PbSe hybrid solar cell with a power conversion efficiency of 4.7% and of a pentacene/PbSe/amorphous silicon photovoltaic device. Although substantive challenges remain, both to better our understanding of the mechanism of singlet exciton fission and to optimize device performance, this realization of a solar cell where photocurrent is simultaneously contributed from a blue-absorbing fission-capable material and an infrared-absorbing conventional cell is an important step towards a dual-bandgap, single-junction, fission-enhanced photovoltaic device, which could one day surpass the Shockley-Queisser limit.

Geminate and nongeminate recombination of triplet excitons formed by singlet fission.

We report the simultaneous observation of geminate and nongeminate triplet-triplet annihilation in a solution-processable small molecule TIPS-tetracene undergoing singlet exciton fission. Using optically detected magnetic resonance, we identify recombination of triplet pairs directly following singlet fission, as well as recombination of triplet excitons undergoing bimolecular triplet-triplet annihilation. We show that the two processes give rise to distinct magnetic resonance spectra, and estimate the interaction between geminate triplet excitons to be 60 neV.

Hysteresis and Its Correlation to Ionic Defects in Perovskite Solar Cells.

Ion migration has been reported to be one of the main reasons for hysteresis in the current-voltage (J-V) characteristics of perovskite solar cells. We investigate the interplay between ionic conduction and hysteresis types by studying Cs0.05(FA0.83MA0.17)0.95Pb(I0.9Br0.1)3 triple-cation perovskite solar cells through a combination of impedance spectroscopy (IS) and sweep-rate-dependent J-V curves. By comparing polycrystalline devices to single-crystal MAPbI3 devices, we separate two defects, ß and γ, both originating from long-range ionic conduction in the bulk. Defect ß is associated with a dielectric relaxation, while the migration of γ is influenced by the perovskite/hole transport layer interface. These conduction types are the causes of different types of hysteresis in J-V curves. The accumulation of ionic defects at the transport layer is the dominant cause for observing tunnel-diode-like characteristics in the J-V curves. By comparing devices with interface modifications at the electron and hole transport layers, we discuss the species and polarity of involved defects.

Temporal Dynamics of Collective Resonances in Periodic Metasurfaces.

Temporal dynamics of confined optical fields can provide valuable insights into light-matter interactions in complex optical systems, going beyond their frequency-domain description. Here, we present a new experimental approach based on interferometric autocorrelation (IAC) that reveals the dynamics of optical near-fields enhanced by collective resonances in periodic metasurfaces. We focus on probing the resonances known as waveguide-plasmon polaritons, which are supported by plasmonic nanoparticle arrays coupled to a slab waveguide. To probe the resonant near-field enhancement, our IAC measurements make use of enhanced two-photon excited luminescence (TPEL) from semiconductor quantum dots deposited on the nanoparticle arrays. Thanks to the incoherent character of TPEL, the measurements are only sensitive to the fundamental optical fields and therefore can reveal clear signatures of their coherent temporal dynamics. In particular, we show that the excitation of a high-Q collective resonance gives rise to interference fringes at time delays as large as 500 fs, much greater than the incident pulse duration (150 fs). Based on these signatures, the basic characteristics of the resonances can be determined, including their Q factors, which are found to exceed 200. Furthermore, the measurements also reveal temporal beating between two different resonances, providing information on their frequencies and their relative contribution to the field enhancement. Finally, we present an approach to enhance the visibility of the resonances hidden in the IAC curves by converting them into spectrograms, which greatly facilitates the analysis and interpretation of the results. Our findings open up new perspectives on time-resolved studies of collective resonances in metasurfaces and other multiresonant systems.

Helical interfacial modulation for perovskite photovoltaics.

Hybrid metal halide perovskites have demonstrated remarkable performances in modern photovoltaics, although their stabilities remain limited. We assess the capacity to advance their properties by relying on interfacial modulators featuring helical chirality based on P,M-(1-methylene-3-methyl-imidazolium)[6]helicene iodides. We investigate their characteristics, demonstrating comparable charge injection for enantiomers and the racemic mixture. Overall, they maintain the resulting photovoltaic performance while improving operational stability, challenging the role of helical chirality in the interfacial modulation of perovskite solar cells.

Singlet exciton fission-sensitized infrared quantum dot solar cells.

We demonstrate an organic/inorganic hybrid photovoltaic device architecture that uses singlet exciton fission to permit the collection of two electrons per absorbed high-energy photon while simultaneously harvesting low-energy photons. In this solar cell, infrared photons are absorbed using lead sulfide (PbS) nanocrystals. Visible photons are absorbed in pentacene to create singlet excitons, which undergo rapid exciton fission to produce pairs of triplets. Crucially, we identify that these triplet excitons can be ionized at an organic/inorganic heterointerface. We report internal quantum efficiencies exceeding 50% and power conversion efficiencies approaching 1%. These findings suggest an alternative route to circumvent the Shockley-Queisser limit on the power conversion efficiency of single-junction solar cells.

Toward Improving Triplet Energy Transfer from Tetracene to Silicon Using a Covalently Bound Tetracene Seed Layer.

Silicon solar cells are operating close to the theoretical maximum efficiency limit. To increase their efficiency beyond this limit, it is necessary to decrease energy losses occurring for high-energy photons. A sensitizing layer of singlet-fission material can in principle double the current generated by high-energy photons, and significantly reduce energy losses from high-energy photons within the solar cell. Here, we construct a model of such a solar cell, using Si(111) surfaces and tetracene. To increase the energy transfer between the two layers, a series of tetracene derivatives was synthesized, and the molecules were covalently attached onto the silicon surface as a seed layer. Using X-ray diffraction, a shift in crystal structure and ordering of the tetracene close to the seed layer can be observed. Unfortunately, the effect on the energy transfer was limited, showing a need for further investigations into the effect of the seed layer.

Transient High-Harmonic Spectroscopy in an Inorganic-Organic Lead Halide Perovskite.

High-harmonic generation is the frequency upconversion of an intense femtosecond infrared laser in a material. In condensed-phase high-harmonic generation, laser-driven currents of coherently excited charge carriers map the electronic structure onto the emitted light. This promises a thus far scarcely explored potential of condensed-phase time-resolved high-harmonic spectroscopy for probing carrier dynamics. Here, we realize this potential and use time-resolved solid-state high-harmonic spectroscopy from a laser-excited methylammonium lead bromide (MAPbBr3) thin film, a key material in perovskite solar cells, for measuring carrier cooling and relaxation on femto- and picosecond time scales. Through comparison with transient absorption, we show the links between carrier dynamics and experimental observables of generated harmonics. By highlighting and understanding the interplay of these dynamics, we demonstrate transient optical control over the emission of solid-state high-harmonic generation in MAPbBr3.

The role of Pb oxidation state of the precursor in the formation of 2D perovskite microplates.

Two-dimensional (2D) lead halide perovskites are an exciting class of materials currently being extensively explored for photovoltaics and other optoelectronic applications. Their ionic nature makes them ideal candidates for solution processing into both thin films and nanostructured crystals. Understanding how 2D lead halide perovskite crystals form is key towards full control over their physical properties, which may enable new physical phenomena and devices. Here, we investigate the effects of the Pb oxidation state of the initial inorganic precursor on the growth of pure-phase (n = 1) - Popper 2D perovskite BA2PbI4 in single-step synthesis. We examine the different crystallisation routes in exposing PbO2 and PbI2 powders to a BAI : IPA organo-halide solution, by combining in situ optical microscopy, UV-VIS spectroscopy and time-resolved high performance liquid chromatography. So far, works using PbO2 to synthesise 3D LHPs introduce a preceding step to reduce PbO2 into either PbO or PbI2. In this work, we find that BA2PbI4 is directly formed when exposing PbO2 to BAI : IPA without the need for an external reducing agent. We explain this phenomenon by the spontaneous reduction/oxidation of PbO2/BAI that occurs under iodine-rich conditions. We observe differences in the final morphology (rectangles vs. octagons) and nanocrystal growth rate, which we explain through the different chemistry and iodoplumbate complexes involved in each case. As such, this work spans the horizon of usable lead precursors and offers a new turning knob to control crystal growth in single-step LHP synthesis.

Enhanced nanoscale imaging of polymer blends by temperature-controlled selective dissolution.

Nanoscale imaging on polymer blends is vital, especially in organic electronics. By using temperature-controlled selective dissolution, the 3D structure of a thin film becomes accessible without the expensive search for adequate orthogonal solvents. The method, which takes advantage of the temperature dependence of the solubility, is demonstrated to image P3HT:PCBM and P3HT:F8TBT photovoltaic blend films using atomic force and scanning electron microscopy.

Metal halide perovskite toxicity effects on Arabidopsis thaliana plants are caused by iodide ions.

Highly efficient solar cells containing lead halide perovskites are expected to revolutionize sustainable energy production in the coming years. Perovskites are generally assumed to be toxic because of the lead (Pb), but experimental evidence to support this prediction is scarce. We tested the toxicity of the perovskite MAPbI3 (MA = CH3NH3) and several precursors in Arabidopsis thaliana plants. Both MAPbI3 and the precursor MAI hamper plant growth at concentrations above 5 µM. Lead-based precursors without iodide are only toxic above 500 µM. Iodine accumulation in Arabidopsis correlates with growth inhibition at much lower concentrations than lead. This reveals that perovskite toxicity at low concentrations is caused by iodide ions specifically, instead of lead. We calculate that toxicity thresholds for iodide, but not lead, are likely to be reached in soils upon perovskite leakage. This work stresses the importance to further understand and predict harmful effects of iodide-containing perovskites in the environment.

Direct Patterning of CsPbBr3 Nanocrystals via Electron-Beam Lithography.

Lead-halide perovskite (LHP) nanocrystals have proven themselves as an interesting material platform due to their easy synthesis and compositional versatility, allowing for a tunable band gap, strong absorption, and high photoluminescence quantum yield (PLQY). This tunability and performance make LHP nanocrystals interesting for optoelectronic applications. Patterning active materials like these is a useful way to expand their tunability and applicability as it may allow more intricate designs that can improve efficiencies or increase functionality. Based on a technique for II-VI quantum dots, here we pattern colloidal LHP nanocrystals using electron-beam lithography (EBL). We create patterns of LHP nanocrystals on the order of 100s of nanometers to several microns and use these patterns to form intricate designs. The patterning mechanism is induced by ligand cross-linking, which binds adjacent nanocrystals together. We find that the luminescent properties are somewhat diminished after exposure, but that the structures are nonetheless still emissive. We believe that this is an interesting step toward patterning LHP nanocrystals at the nanoscale for device fabrication.

Directional quantum dot emission by soft-stamping on silicon Mie resonators.

We present a soft-stamping method to selectively print a homogenous layer of CdSeTe/ZnS core-shell quantum dots (QDs) on top of an array of Si nanocylinders with Mie-type resonant modes. Using this new method, we gain accurate control of the quantum dot's angular emission through engineered coupling of the QDs to these resonant modes. Using numerical simulations we show that the emission into or away from the Si substrate can be precisely controlled by the QD position on the nanocylinder. QDs centered on a 400 nm diameter nanocylinder surface show 98% emission directionality into the Si substrate. Alternatively, for homogenous ensembles placed over the nanocylinder top-surface, the upward emission is enhanced 10-fold for 150 nm diameter cylinders. Experimental PL intensity measurements corroborate the simulated trends with cylinder diameter. PL lifetime measurements reflect well the variations of the local density of states at the QD position due to coupling to the resonant cylinders. These results demonstrate that the soft imprint technique provides a unique manner to directly integrate optical emitters with a wide range of nanophotonic geometries, with potential applications in LEDs, luminescent solar concentrators, and up- and down-conversion schemes for improved photovoltaics.