Office or home versus 24-hour blood pressure measurement in stable kidney transplant recipients.

BACKGROUND AND HYPOTHESIS: The aim of this study was to quantify hypertension control and evaluate concordance between all commonly available blood pressure modalities in kidney transplant recipients (KTR). METHODS: For this prospective cross-sectional study 89 stable KTR were recruited at the Charité Transplant Outpatient Clinic. For each study participant office (manual office blood pressure 'MOBP' and automated office blood pressure 'AOBP'), 7-day home (HBPM) and 24-hour ambulatory blood pressure measurement (24h-ABPM) were performed. RESULTS: 80 of the 89 patients recruited had sufficient blood pressure recordings. Mean blood pressure for MOBP, AOBP, HBPM and 24h-ABPM was 129/73, 126/71, 131/85 and 130/81 mmHg, respectively. Uncontrolled hypertension, as defined by 24h-ABPM (mean ≥ 130/80 mmHg), was present in 53 (66%) patients. MOBP, AOBP and HBPM classified 19 (24%), 22 (28%) and 41 (51%) patients respectively as 'uncontrolled hypertensive'. The Bland-Altman plot showed good agreement between systolic MOBP, AOBP, HBPM and Daytime-ABPM (mean bias ± SD: -1 ± 13 mmHg, -4 ± 13 mmHg, 1 ± 10 mmHg, respectively). Uncontrolled nighttime hypertension was present in 74 (93%) KTR, with 71 (89%) patients showing a non-physiological dipping pattern. Moderate positive correlation between Daytime-ABPM/HBPM and Nighttime-ABPM (Pearson Correlation Coefficients: 0.62-0.73), followed by MOBP/AOBP (Pearson Correlation Coefficients: 0.49-0.59) was noted. eGFR and proteinuria displayed weak correlation with 24h-, Daytime- and Nighttime-ABPM (absolute values of Pearson Correlation Coefficients: 0.04-0.41). No robust association with either 24h-, Daytime- or Nighttime-ABPM was observed for volume status exams. CONCLUSIONS: Masked hypertension is highly prevalent in KTR, especially due to high rates of uncontrolled nighttime hypertension. HBPM shows the narrowest limits of agreement with Daytime-ABPM. Daytime-ABPM and HBPM show the highest, albeit clinically insufficient, correlation with Nighttime-ABPM. Systematic integration of 24h-ABPM into clinical practice, as proposed by the '2023 ESH Guidelines for the Management of arterial hypertension', should not be withheld for the KTR population. Clinical trials evaluating treatment of hypertension in KTR are urgently needed.

Influence of Early Postoperative Basal Insulin Treatment and Post-Transplant Diabetes Mellitus Risk on Health-Related Quality of Life in Kidney Transplant Recipients-An Analysis of Data From a Randomized Controlled Trial.

Health-related quality of life (HRQOL) improves after kidney transplantation (KT) but declines over time. Studies on the effect of early postoperative basal insulin therapy on HRQOL after KT, especially KTRs at high risk of developing post-transplant diabetes mellitus (PTDM) are missing. Data from a randomized controlled trial on 148 non-diabetic KTRs were analyzed. HRQOL using the KDQOL-SF™ was compared in KTRs who either received early postoperative basal insulin therapy or standard-of-care and in KTRs at risk of developing PTDM. Determinants of HRQOL outcomes were investigated using multivariable linear regression analysis. In total, 148 patients completed the KDQOL-SF at baseline. Standard-of-care or early basal insulin therapy after KT did not influence HRQOL. Overall, KT improved the mental (MCS) and physical component summary (PCS) scores at 6-month after KT, which remained stable during further follow-up visits. However, patients at high-risk for PTDM had significantly greater impairment in the PCS score (baseline, 24 months) without differences in MCS scores. In the multivariable regression analysis, allograft function and hemoglobin levels were associated with decreased MCS and PCS scores, respectively. A limitation of the study is the fact that only around 50% of the ITP-NODAT study patients participated in the HRQOL evaluation. Still, our data clearly show that early basal insulin therapy does not affect HRQOL after KT but is negatively influenced by classical clinical factors and PTDM-risk at 24 months after KT. The latter might be influenced by older age.

Immunoglobulin G of systemic sclerosis patients programs a pro-inflammatory and profibrotic phenotype in monocyte-like THP-1 cells.

OBJECTIVES: Functional IgG autoantibodies against diverse G protein-coupled receptors, i.e. antibodies with agonistic or antagonistic activity at these receptors, are abundant in human serum. Their levels are altered in patients with SSc, and autoantibodies against angiotensin II receptor 1 (ATR1) and endothelin receptor A (ETA) have been suggested to drive SSc by inducing the chemokines CXCL8 and CCL18 in the blood. The objective of our study is to profile the effect of IgG in SSc (SSc-IgG) on the production of soluble mediators in monocytic cells. METHODS: Monocyte-like THP-1 cells were stimulated with SSc-IgG and their secretome was analysed. Furthermore, the significance of major pro-inflammatory pathways for the induction of CXCL8 and CCL18 in response to SSc-IgG was assessed by a pharmacological approach. RESULTS: Stimulation with SSc-IgG significantly alters the secretome of THP-1 cells towards a general pro-inflammatory and profibrotic phenotype, which includes an increase of CCL18 and CXCL8. The consequent expression profiles vary depending on the individual donor of the SSc-IgG. CCL18 and CXCL8 expression is thus regulated differentially, with AP-1 driving the induction of both CCL18 and CXCL8 and the TAK/IKK-ß/NF-κB pathway and ERK1/2 driving that of CXCL8. CONCLUSIONS: Our results suggest that SSc-IgG contributes to the generation of the pro-inflammatory/profibrotic tissue milieu characteristic of SSc by its induction of a respective phenotype in monocytes. Furthermore, our results highlight AP-1 as a critical regulator of gene transcription of CCL18 in monocytic cells and as a promising pharmacological therapeutic target for the treatment of SSc.

Development of food grade 3D printable ink based on pectin containing cannabidiol/cyclodextrin inclusion complexes.

In the current study a 3D-printable system was developed, based on natural, food-grade and nontoxic materials that may be used as a platform technology to host cannabinoids, and more specifically CBD for medicinal purposes. Pectin and honey were combined toward the fabrication of 3D printable inks that form solid structures upon drying. This model food-grade 3D-printed system was evaluated as a host matrix for the incorporation of CBD, in the form of inclusion complexes with ß-cyclodextrins. The prepared solid inclusion complexes were characterized by means of Differential Scanning Calorimetry (DSC), Fourier-Transform Infrared (FTIR) and Thermogravimetric Analysis (TGA) complemented with phase solubility studies and in vitro release of the ß-CD/CBD complex. The release behavior of CBD from the 3D printed formulations was assessed in simulated gastric fluid (SGF), simulated intestinal fluid (SIF) and simulated colonic fluid (SCF). The results shown that that the highest release rates of CBD were obtained in SCF medium, with minor release in SGF and SIF media.

Inkjet printing of a thermolabile model drug onto FDM-printed substrates: formulation and evaluation.

OBJECTIVE: The inkjet printing (IP) and fused deposition modeling (FDM) technologies have emerged in the pharmaceutical field as novel and personalized formulation approaches. Specific manufacturing factors must be considered in each adopted methodology, i.e. the development of suitable substrates for IP and the incorporation of highly thermostable active pharmaceutical compounds (APIs) for FDM. In this study, IP and FDM printing technologies were investigated for the fabrication of hydroxypropyl methylcellulose-based mucoadhesive films for the buccal delivery of a thermolabile model drug. Significance: This proof-of-concept approach was expected to provide an alternative formulation methodology for personalized mucoadhesive buccal films. METHODS: Mucoadhesive substrates were prepared by FDM and were subjected to sequential IP of an ibuprofen-loaded liquid ink. The interactions between these processes and the performance of the films were evaluated by various analytical and spectroscopic techniques, as well as by in vitro and ex vivo studies. RESULTS: The model drug was efficiently deposited by sequential IP passes onto the FDM-printed substrates. Significant variations were revealed on the morphological, physicochemical and mechanical properties of the prepared films, and linked to the number of IP passes. The mechanism of drug release, the mucoadhesion and the permeation of the drug through the buccal epithelium were evaluated, in view of the extent of ink deposition onto the buccal films, as well as the distribution of the API. CONCLUSIONS: The presented methodology provided a proof-of-concept formulation approach for the development of personalized mucoadhesive films.

FDM-printed pH-responsive capsules for the oral delivery of a model macromolecular dye.

To this day, the oral delivery of biomacromolecules remains a major developmentally-oriented challenge. A combinatorial approach was followed at this study, to formulate an efficient carrier for the in vitro delivery of a model macromolecule, fluorescein isothiocyanate-dextran 4 kDa (FD4). The model macromolecule was formulated in a self-assembling peptide hydrogel (ac-(RADA)4-CONH2), prior to deposition in a hydroxypropyl methylcellulose-phthalate (HPMCP)-based 3D-printed capsule. Loading of FD4 was investigated for potential alterations on the structural (AFM) and gelling properties of the peptide carrier. Thermal analysis and morphological properties of the 3D-printed capsules were assessed by TGA, DSC and microscopy studies. For the peptide hydrogel, similar release profiles of FD4 were recorded in simulated gastric fluid pH 1.2 and phosphate buffer saline pH 7.4, indicating the need for a structural barrier, to protect the peptide carrier from the acidic environment of the stomach. The pH responsive character of the HPMCP-based capsule was evidenced in the release profiles of FD4 in a sequence of release media, i.e. simulated gastric fluid pH 1.2, simulated intestinal fluid pH 6.8 and phosphate buffer saline pH 7.4. The results supported the combinatorial formulation approach as a promising system for the efficient oral delivery of biomacromolecules.

Development and Characterization of a Self-Nanoemulsifying Drug Delivery System Comprised of Rice Bran Oil for Poorly Soluble Drugs.

Poor aqueous solubility and low bioavailability are limiting factors in the oral delivery of lipophilic drugs. In a formulation approach to overcome these limitations, rice bran (RB) oil was evaluated as drug carrier in the development of self-nanoemulsifying drug delivery systems (SNEDDS). The performance of RB in formulations incorporating Kolliphor RH40 or Kolliphor EL as surfactants and Transcutol HP as cosolvent was compared to a common oil vehicle, corn oil (CO). Serial dilutions of the preconcentrates were performed in various media [distilled water and simulated intestinal fluids mimicking fasted state (FaSSIF) and fed state (FeSSIF)] and at different dilution ratios to simulate the in vivo droplets' behavior. The developed SNEDDS were assessed by means of phase separation, droplet size, polydispersity index, and ζ-potential. Complex ternary diagrams were constructed to identify compositions exhibiting monophasic behavior, droplet size < 100 nm, and polydispersity index (PDI) < 0.25. Multifactor analysis and response surface areas intended to determine the factors significantly affecting droplet size. The oil capacity to accommodate lipophilic drugs was assessed via fluorescence spectroscopy based on the solvatochromic behavior of Nile Red. Solubility studies were performed to prepare fenofibrate- and itraconazole-loaded SNEDDS and assess their droplet size, whereas dissolution experiments were conducted in simulated intestinal fluids. Caco-2 cell viability studies confirmed the safety of the SNEDDS formulations at 1:100 and 1:1000 dilutions after cell exposure in culture for 4 h. The obtained results showed similar performance between RB and CO supporting the potential of RB as oil vehicle for the effective oral delivery of lipophilic compounds.

Polymer-Lipid Microparticles for Pulmonary Delivery.

Toward engineering approaches that are designed to optimize the particle size, morphology, and mucoadhesion behavior of the particulate component of inhaler formulations, this paper presents the preparation, physicochemical characterization, and preliminary in vitro evaluation of multicomponent polymer-lipid systems that are based on "spray-drying engineered" α-lactose monohydrate microparticles. The formulations combine an active (budesonide) with a lung surfactant (dipalmitoylphosphatidylcholine) and with materials that are known for their desirable effects on morphology (polyvinyl alcohol), aerosolization (l-leucine), and mucoadhesion (chitosan). The effect of the composition of formulations on the morphology, distribution, and in vitro mucoadhesion profiles is presented along with "Calu-3 cell monolayers" data that indicate good cytocompatibility and also with simulated-lung-fluid data that are consistent with the therapeutically useful release of budesonide.

Development of a New Aprepitant Liquisolid Formulation with the Aid of Artificial Neural Networks and Genetic Programming.

In the present study, liquisolid formulations were developed for improving dissolution profile of aprepitant (APT) in a solid dosage form. Experimental studies were complemented with artificial neural networks and genetic programming. Specifically, the type and concentration of liquid vehicle was evaluated through saturation-solubility studies, while the effect of the amount of viscosity increasing agent (HPMC), the type of wetting (Soluplus® vs. PVP) and solubilizing (Poloxamer®407 vs. Kolliphor®ELP) agents, and the ratio of solid coating (microcrystalline cellulose) to carrier (colloidal silicon dioxide) were evaluated based on in vitro drug release studies. The optimum liquisolid formulation exhibited improved dissolution characteristics compared to the marketed product Emend®. X-ray diffraction (XRD), scanning electron microscopy (SEM) and a novel method combining particle size analysis by dynamic light scattering (DLS) and HPLC, revealed that the increase in dissolution rate of APT in the optimum liquisolid formulation was due to the formation of stable APT nanocrystals. Differential scanning calorimetry (DSC) and attenuated total reflection FTIR spectroscopy (ATR-FTIR) revealed the presence of intermolecular interactions between APT and liquisolid formulation excipients. Multilinear regression analysis (MLR), artificial neural networks (ANNs), and genetic programming (GP) were used to correlate several formulation variables with dissolution profile parameters (Y 15min and Y 30min) using a full factorial experimental design. Results showed increased correlation efficacy for ANNs and GP (RMSE of 0.151 and 0.273, respectively) compared to MLR (RMSE = 0.413).

A floating 3D printed polypill formulation for the coadministration and sustained release of antihypertensive drugs.

Polypharmacy is a common issue, especially among elderly patients resulting in administration errors and patient inconvenience. Hypertension is a prevalent health condition that frequently leads to polypharmacy, as its treatment typically requires the co-administration of more than one different Active Pharmaceutical Ingredients (API's). To address these issues, floating hollow torus-shaped dosage forms were developed, aiming at providing prolonged gastric retention and sustained drug release. The dosage forms (polypills) containing three anti-hypertensive API's (diltiazem (DIL), propranolol (PRP) and hydrochlorothiazide (HCTZ)) were created via Fused Deposition Modelling 3D printing. A multitude of the dosage forms were loaded into a capsule and the resulting formulation achieved prolonged retention times over a 12-hour period in vitro, by leveraging both the buoyancy of the dosage forms, and the "cheerios effect" that facilitates the aggregation and retention of the dosage forms via a combination of surface tension and shape of the objects. Physicochemical characterization methods and imaging techniques were employed to investigate the properties and the internal and external structure of the dosage forms. Furthermore, an ex vivo porcine stomach model revealed substantial aggregation, adhesion and retention of the 3D printed dosage forms in porcine stomach. In vitro dissolution testing demonstrated almost complete first-order release of PRP and DIL (93.52 % and 99.9 %, respectively) and partial release of HCTZ (65.22 %) in the 12 h timeframe. Finally, a convolution-based single-stage approach was employed in order to predict the pharmacokinetic (PK) parameters of the API's of the formulation and the resemblance of their PK behavior with previously reported data.

Fabrication of 3D-printed octreotide acetate-loaded oral solid dosage forms by means of semi-solid extrusion printing.

Semi-solid extrusion (SSE) 3D printing technology was utilized for the encapsulation of octreotide acetate (OCT) into 3D-printed oral dosage forms in ambient conditions. The inks and the OCT-loaded 3D-printed oral dosage forms were characterized by means of rheology, Fourier-transform infrared (FTIR) spectroscopy and Nuclear Magnetic Resonance (NMR). In vitro studies demonstrated that the formulations released OCT in a controlled manner. The application of these formulations to Caco-2 cell monolayers revealed their capability to induce the transient opening of tight junctions in a reversible manner as evidenced by Transepithelial Resistance (TEER) measurements. Cellular assays (CCK-8 assay) demonstrated the viability of intestinal cells in the presence of these formulations. The in vitro transport studies across Caco-2 monolayers demonstrated the ability of these formulations to enhance the OCT uptake across the cell monolayer over time due to opening of the tight junctions.

COVID-19 Outcomes in Kidney Transplant Recipients in a German Transplant Center.

Kidney transplant recipients (KTRs) show higher morbidity and mortality from COVID-19 than the general population and have an impaired response to vaccination. We analyzed COVID-19 incidence and clinical outcomes in a single-center cohort of approximately 2500 KTRs. Between 1 February 2020 and 1 July 2022, 578 KTRs were infected with SARS-CoV-2, with 25 (4%) recurrent infections. In total, 208 KTRs (36%) were hospitalized, and 39 (7%) died. Among vaccinated patients, infection with the Omicron variant had a mortality of 2%. Unvaccinated patients infected with the Omicron variant showed mortality (9% vs. 11%) and morbidity (hospitalization 52% vs. 54%, ICU admission 12% vs. 18%) comparable to the pre-Omicron era. Multivariable analysis revealed that being unvaccinated (OR = 2.15, 95% CI [1.38, 3.35]), infection in the pre-Omicron era (OR = 3.06, 95% CI [1.92, 4.87]), and higher patient age (OR = 1.04, 95% CI [1.03, 1.06]) are independent risk factors for COVID-19 hospitalization, whereas a steroid-free immunosuppressive regimen was found to reduce the risk of COVID-19 hospitalization (OR = 0.51, 95% CI [0.33, 0.79]). This suggests that both virological changes in the Omicron variant and vaccination reduce the risk for morbidity and mortality from COVID-19 in KTRs. Our data extend the knowledge from the general population to KTRs and provide important insights into outcomes during the Omicron era.

The Advent of a New Era in Digital Healthcare: A Role for 3D Printing Technologies in Drug Manufacturing?

The technological revolution has physically affected all manufacturing domains, at the gateway of the fourth industrial revolution. Three-dimensional (3D) printing has already shown its potential in this new reality, exhibiting remarkable applications in the production of drug delivery systems. As part of this concept, personalization of the dosage form by means of individualized drug dose or improved formulation functionalities has concentrated global research efforts. Beyond the manufacturing level, significant parameters must be considered to promote the real-time manufacturing of pharmaceutical products in distributed areas. The majority of current research activities is focused on formulating 3D-printed drug delivery systems while showcasing different scenarios of installing 3D printers in patients' houses, hospitals, and community pharmacies, as well as in pharmaceutical industries. Such research presents an array of parameters that must be considered to integrate 3D printing in a future healthcare system, with special focus on regulatory issues, drug shortages, quality assurance of the product, and acceptability of these scenarios by healthcare professionals and public parties. The objective of this review is to critically present the spectrum of possible scenarios of 3D printing implementation in future healthcare and to discuss the inevitable issues that must be addressed.

Correction: Andreadis et al. The Advent of a New Era in Digital Healthcare: A Role for 3D Printing Technologies in Drug Manufacturing? Pharmaceutics2022, 14, 609.

In the original publication [...].

Influence of Belatacept- vs. CNI-Based Immunosuppression on Vascular Stiffness and Body Composition.

BACKGROUND: Arterial stiffness and phase angle (PhA) have gained importance as a diagnostic and prognostic parameter in the management of cardiovascular disease. There are few studies regarding the differences in arterial stiffness and body composition between renal transplant recipients (RTRs) receiving belatacept (BELA) vs. calcineurin inhibitors (CNI). Therefore, we investigated the differences in arterial stiffness and body composition between RTRs treated with different immunosuppressants, including BELA. METHODS: In total, 325 RTRs were enrolled in the study (mean age 52.2 years, M -62.7%). Arterial stiffness was determined with an automated oscillometric device. All body composition parameters were assessed, based on bioelectrical impedance analysis (BIA), and laboratory parameters were obtained from the medical files of the patients. RESULTS: We did not detect any significant difference in terms of arterial stiffness and PhA in RTRs undergoing different immunosuppressive regimens, based on CsA, Tac, or BELA. Age was an essential risk factor for greater arterial stiffness. The PhA was associated with age, BMI, time of dialysis before transplantation, and kidney graft function. CONCLUSION: No significant differences in arterial stiffness and PhA were observed in RTRs under different immunosuppressive regimens. While our data provide additional evidence for arterial stiffness and PhA in RTRs, more research is needed to fully explore these cardiovascular risk factors and the impact of different immunosuppressive regimens.

Self-reported risk of obstructive sleep apnea syndrome, and awareness about it in the community of 4 insular complexes comprising 41 Greek Islands.

Obstructive Sleep Apnea Syndrome (OSAS) is a chronic disease that significantly increases morbidity and mortality of the affected population. There is lack of data concerning the OSAS prevalence in the insular part of Greece. The purpose of this study was to investigate the self-reported prevalence of OSAS in 4 Greek insular complexes comprising 41 islands, and to assess the awareness of the population regarding OSAS and its diagnosis. Our study comprised 700 participants from 41 islands of the Ionian, Cyclades, Dodecanese and Northeast Aegean island complexes that were studied by means of questionnaires via a telephone randomized survey (responsiveness rate of 25.74%). Participants were assessed by the Berlin Questionnaire (BQ) for evaluation of OSA risk, by the Epworth Sleepiness Scale (ESS) for evaluation of excessive daytime sleepiness, and by 3 questions regarding the knowledge and diagnosis of OSAS. The percentage of participants at high risk according to BQ was 27.29% and the percentage of people who were at high risk according to ESS was 15.43%. A percentage of 6.29% of the population was at high risk for OSAS (high risk both in BQ and ESS). A high percentage of 73.43%, were aware of OSAS as a syndrome however a significantly less percentage (28.00%) was aware of how a diagnosis of OSAS is established. The community prevalence of OSAS in Greek islands in combination with the low-level awareness of the OSAS diagnostic methods highlights the need for development of health promotion programs aiming at increasing the detection of patients at risk while increasing the awareness of OSAS.

Fabrication and Preliminary In Vitro Evaluation of 3D-Printed Alginate Films with Cannabidiol (CBD) and Cannabigerol (CBG) Nanoparticles for Potential Wound-Healing Applications.

In this study, drug carrier nanoparticles comprised of Pluronic-F127 and cannabidiol (CBD) or cannabigerol (CBG) were developed, and their wound healing action was studied. They were further incorporated in 3D printed films based on sodium alginate. The prepared films were characterized morphologically and physicochemically and used to evaluate the drug release profiles of the nanoparticles. Additional studies on their water loss rate, water retention capacity, and 3D-printing shape fidelity were performed. Nanoparticles were characterized physicochemically and for their drug loading performance. They were further assessed for their cytotoxicity (MTT Assay) and wound healing action (Cell Scratch Assay). The in vitro wound-healing study showed that the nanoparticles successfully enhanced wound healing in the first 6 h of application, but in the following 6 h they had an adverse effect. MTT assay studies revealed that in the first 24 h, a concentration of 0.1 mg/mL nanoparticles resulted in satisfactory cell viability, whereas CBG nanoparticles were safe even at 48 h. However, in higher concentrations and after a threshold of 24 h, the cell viability was significantly decreased. The results also presented mono-disperse nano-sized particles with diameters smaller than 200 nm with excellent release profiles and enhanced thermal stability. Their entrapment efficiency and drug loading properties were higher than 97%. The release profiles of the active pharmaceutical ingredients from the films revealed a complete release within 24 h. The fabricated 3D-printed films hold promise for wound healing applications; however, more studies are needed to further elucidate their mechanism of action.

Haptic Evaluation of 3D-printed Braille-encoded Intraoral Films.

The three-dimensional (3D) printing technology has recently emerged in the pharmaceutical field, providing an array of applications for individualized dosing and elaborate formulation designs. However, an alternative asset of the 3D printing technology is the capability to imprint haptic identifiers directly onto the surface of the formulations. This approach can generate novel design concepts, that will serve specific populations for identifying the right treatment regimen, i.e., visually impaired people. Toward this direction, the fused deposition modelling (FDM) technique was investigated for manufacturing intraoral films and incorporating Braille characters on the available area. The films comprised a drug-loaded compartment and a backing layer, which are typical structural characteristics for buccal delivery. A hydrophilic polymer, i.e., hydroxypropyl methylcellulose, provided the polymer matrix for both compartments, whereas ketoprofen was incorporated in the study as model drug. The Braille-encoded texts were designed on top of the backing layer, complying with the Marburg Medium spacing convention for pharmaceutical Braille. Moreover, modifications on the standard spacing and dimension parameters were applied, to investigate the accuracy and repeatability of the FDM process. The fabricated films were subjected to a haptic evaluation study with the aid of visually impaired individuals, to assess the readability of the 3D-printed Braille-encoded text. The outcomes of the study highlighted the capacity of the FDM technology in combining novel manufacturing concepts for individualized therapies with customized services that can be provided to specific populations, as in the case of people with visual impairment.

Modular design principle based on compartmental drug delivery systems.

The current manufacturing solutions for oral solid dosage forms are fundamentally based on technologies from the 19th century. This approach is well suited for mass production of one-size-fits-all products; however, it does not allow for a straight-forward personalization and mass customization of the pharmaceutical end-product. In order to provide better therapies to the patients, a need for innovative manufacturing concepts and product design principles has been rising. Additive manufacturing opens up a possibility for compartmentalization of drug products, including design of spatially separated multidrug and functional excipient compartments. This compartmentalized solution can be further expanded to modular design thinking. Modular design is referring to combination of building blocks containing a given amount of drug compound(s) and related functional excipients into a larger final product. Implementation of modular design principles is paving the way for implementing the emerging personalization potential within health sciences by designing compartmental and reactive product structures that can be manufactured based on the individual needs of each patient. This review will introduce the existing compartmentalized product design principles and discuss the integration of these into edible electronics allowing for innovative control of drug release.

Mucosal drug delivery and 3D printing technologies: A focus on special patient populations.

In the last decade, additive manufacturing (AM) technologies have revolutionized how healthcare provision is envisioned. The rapid evolution of these technologies has already created a momentum in the effort to address unmet personalized needs in large patient groups, especially those belonging to sensitive subgroup populations (e.g., paediatric, geriatric, visually impaired). At the same time, AM technologies have become a salient ally to overcome defined health challenges in drug formulation development by addressing not only the requirement of personalized therapy, but also problems related to lowering non-specific drug distribution and the risk of adverse reactions, enhancing drug absorption and bioavailability, as well as ease of administration and patient compliance. To this end, mucoadhesive drug delivery systems fabricated with the support of AM technologies provide competitive advantages over conventional dosage forms, aiming to entice innovation in drug formulation with special focus on sensitive patient populations.