Health benefits of decreases in on-road transportation emissions in the United States from 2008 to 2017.

Decades of air pollution regulation have yielded enormous benefits in the United States, but vehicle emissions remain a climate and public health issue. Studies have quantified the vehicle-related fine particulate matter (PM2.5)-attributable mortality but lack the combination of proper counterfactual scenarios, latest epidemiological evidence, and detailed spatial resolution; all needed to assess the benefits of recent emission reductions. We use this combination to assess PM2.5-attributable health benefits and also assess the climate benefits of on-road emission reductions between 2008 and 2017. We estimate total benefits of $270 (190 to 480) billion in 2017. Vehicle-related PM2.5-attributable deaths decreased from 27,700 in 2008 to 19,800 in 2017; however, had per-mile emission factors remained at 2008 levels, 48,200 deaths would have occurred in 2017. The 74% increase from 27,700 to 48,200 PM2.5-attributable deaths with the same emission factors is due to lower baseline PM2.5 concentrations (+26%), more vehicle miles and fleet composition changes (+22%), higher baseline mortality (+13%), and interactions among these (+12%). Climate benefits were small (3 to 19% of the total). The percent reductions in emissions and PM2.5-attributable deaths were similar despite an opportunity to achieve disproportionately large health benefits by reducing high-impact emissions of passenger light-duty vehicles in urban areas. Increasingly large vehicles and an aging population, increasing mortality, suggest large health benefits in urban areas require more stringent policies. Local policies can be effective because high-impact primary PM2.5 and NH3 emissions disperse little outside metropolitan areas. Complementary national-level policies for NOx are merited because of its substantial impacts-with little spatial variability-and dispersion across states and metropolitan areas.

Acute exposure to total and source-specific ambient fine particulate matter and risk of respiratory disease hospitalization in Kuwait.

Many epidemiologic studies concerned with acute exposure to ambient PM2.5 have reported positive associations for respiratory disease hospitalization. However, few studies have investigated this relationship in Kuwait and extrapolating results from other regions may involve considerable uncertainty due to variations in concentration levels, particle sources and composition, and population characteristics. Local studies can provide evidence for strategies to reduce risks from episodic exposures to high levels of ambient PM2.5 and generating hypotheses for evaluating health risks from chronic exposures. Therefore, using speciated PM2.5 data from local samplers, we analyzed the impact of daily total and source-specific PM2.5 exposure on respiratory hospitalizations in Kuwait using a case-crossover design with conditional quasi-Poisson regression. Total and source-specific ambient PM2.5 were modeled using 0-5-day cumulative distributed lags. For total PM2.5, we observed a 0.16% (95% confidence interval [CI] = 0.05, 0.27%) increase in risk for respiratory hospitalization per 1 µg/m3 increase in concentration. Of the source factors assessed, dust demonstrated a statistically significant increase in risk (0.16%, 95% CI = 0.04, 0.29%), and the central estimate for regional PM2.5 was positive (0.11%) but not statistically significant (95% CI = -0.11, 0.33%). No effect was observed from traffic emissions and 'other' source factors. When hospitalizations were stratified by sex, nationality, and age, we found that female, Kuwaiti national, and adult groups had higher effect estimates. These results suggest that exposure to ambient PM2.5 is harmful in Kuwait and provide some evidence of differential toxicity and effect modification depending on the PM2.5 source and population affected.

Health benefits of on-road transportation pollution control programs in China.

China started to implement comprehensive measures to mitigate traffic pollution at the end of 1990s, but the comprehensive effects, especially on ambient air quality and public health, have not yet been systematically evaluated. In this study, we analyze the effects of vehicle emission control measures on ambient air pollution and associated deaths attributable to long-term exposures of fine particulate matter (PM2.5) and O3 based on an integrated research framework that combines scenario analysis, air quality modeling, and population health risk assessment. We find that the total impact of these control measures was substantial. Vehicular emissions during 1998-2015 would have been 2-3 times as large as they actually were, had those measures not been implemented. The national population-weighted annual average concentrations of PM2.5 and O3 in 2015 would have been higher by 11.7 µg/m3 and 8.3 parts per billion, respectively, and the number of deaths attributable to 2015 air pollution would have been higher by 510 thousand (95% confidence interval: 360 thousand to 730 thousand) without these controls. Our analysis shows a concentration of mortality impacts in densely populated urban areas, motivating local policymakers to design stringent vehicle emission control policies. The results imply that vehicle emission control will require policy designs that are more multifaceted than traditional controls, primarily represented by the strict emission standards, with careful consideration of the challenges in coordinated mitigation of both PM2.5 and O3 in different regions, to sustain improvement in air quality and public health given continuing swift growth in China's vehicle population.

Long-Term Association of Air Pollution and Hospital Admissions Among Medicare Participants Using a Doubly Robust Additive Model.

BACKGROUND: Studies examining the nonfatal health outcomes of exposure to air pollution have been limited by the number of pollutants studied and focus on short-term exposures. METHODS: We examined the relationship between long-term exposure to fine particulate matter with an aerodynamic diameter <2.5 micrometers (PM2.5), NO2, and tropospheric ozone and hospital admissions for 4 cardiovascular and respiratory outcomes (myocardial infarction, ischemic stroke, atrial fibrillation and flutter, and pneumonia) among the Medicare population of the United States. We used a doubly robust method for our statistical analysis, which relies on both inverse probability weighting and adjustment in the outcome model to account for confounding. The results from this regression are on an additive scale. We further looked at this relationship at lower pollutant concentrations, which are consistent with typical exposure levels in the United States, and among potentially susceptible subgroups. RESULTS: Long-term exposure to fine PM2.5 was associated with an increased risk of all outcomes with the highest effect seen for stroke with a 0.0091% (95% CI, 0.0086-0.0097) increase in the risk of stroke for each 1-µg/m3 increase in annual levels. This translated to 2536 (95% CI, 2383-2691) cases of hospital admissions with ischemic stroke per year, which can be attributed to each 1-unit increase in fine particulate matter levels among the study population. NO2 was associated with an increase in the risk of admission with stroke by 0.00059% (95% CI, 0.00039-0.00075) and atrial fibrillation by 0.00129% (95% CI, 0.00114-0.00148) per ppb and tropospheric ozone was associated with an increase in the risk of admission with pneumonia by 0.00413% (95% CI, 0.00376-0.00447) per parts per billion. At lower concentrations, all pollutants were consistently associated with an increased risk for all our studied outcomes. CONCLUSIONS: Long-term exposure to air pollutants poses a significant risk to cardiovascular and respiratory health among the elderly population in the United States, with the greatest increase in the association per unit of exposure occurring at lower concentrations.

Oxide Ion and Proton Conductivity in a Family of Highly Oxygen-Deficient Perovskite Derivatives.

Functional oxides showing high ionic conductivity have many important technological applications. We report oxide ion and proton conductivity in a family of perovskite-related compounds of the general formula A3OhTd2O7.5, where Oh is an octahedrally coordinated metal ion and Td is a tetrahedrally coordinated metal ion. The high tetrahedral content in these ABO2.5 compositions relative to that in the perovskite ABO3 or brownmillerite A2B2O5 structures leads to tetrahedra with only three of their four vertices connected in the polyhedral framework, imparting a potential low-energy mechanism for O2- migration. The low- and high-temperature average and local structures of Ba3YGa2O7 (P2/c, a = 7.94820(5) Å, b = 5.96986(4) Å, c = 18.4641(1) Å, and ß = 91.2927(5) ° at 22 °C) were determined by Rietveld and neutron pair distribution function (PDF) analysis, and a phase transition to a high-temperature P1121/a structure (a = 12.0602(1) Å, b = 9.8282(2) Å, c = 8.04982(6) Å, and γ = 107.844(3)° at 1000 °C) involving the migration of O2- ions was identified. Ionic conductivities of Ba3YGa2O7.5 and compositions substituted to introduce additional oxide vacancies and interstitials are reported. Most phases show proton conductivity at lower temperatures and oxide ion conductivity at high temperatures, with Ba3YGa2O7.5 retaining proton conductivity at high temperatures. Ba2.9La0.1YGa2O7.55 and Ba3YGa1.9Ti0.1O7.55 appear to be dominant oxide ion conductors, with conductivities an order of magnitude higher than that of the parent compound.

Mortality Attributable to Long-Term Exposure to Ambient Fine Particulate Matter: Insights from the Epidemiologic Evidence for Understudied Locations.

Epidemiologic cohort studies have consistently demonstrated that long-term exposure to ambient fine particles (PM2.5) is associated with mortality. Nevertheless, extrapolating results to understudied locations may involve considerable uncertainty. To explore this issue, this review discusses the evidence for (i) the associated risk of mortality, (ii) the shape of the concentration-response function, (iii) a causal interpretation, and (iv) how the source mix/composition of PM2.5 and population characteristics may alter the effect. The accumulated evidence suggests the following: (i) In the United States, the change in all-cause mortality risk per µg/m3 is about 0.8%. (ii) The concentration-response function appears nonlinear. (iii) Causation is overwhelmingly supported. (iv) Fossil fuel combustion-related sources are likely more toxic than others, and age, race, and income may modify the effect. To illustrate the use of our findings in support of a risk assessment in an understudied setting, we consider Kuwait. However, given the complexity of this relationship and the heterogeneity in reported effects, it is unreasonable to think that, in such circumstances, point estimates can be meaningful. Consequently, quantitative probabilistic estimates, which cannot be derived objectively, become essential. Formally elicited expert judgment can provide such estimates, and this review provides the evidence to support an elicitation.

Mortality Benefits and Control Costs of Improving Air Quality in Mexico City: The Case of Heavy Duty Diesel Vehicles.

Diesel vehicles are significant contributors to air pollution in Mexico City. We estimate the costs and mortality benefits of retrofitting heavy-duty vehicles with particulate filters and oxidation catalysts. The feasibility and cost-effectiveness of controls differ by vehicle model-year and type. We evaluate 1985 to 2014 model-year vehicles from 10 vehicle classes and five model-year groups. Our analysis shows that retrofitting all vehicles with the control that maximizes expected net benefits for that vehicle type and model-year group has the potential to reduce emissions of primary fine particles (PM2.5 ) by 950 metric tons/year; cut the population-weighted annual mean concentration of PM2.5 in Mexico City by 0.90 µg/m3 ; reduce the annual number of deaths attributable to air pollution by over 80; and generate expected annual health benefits of close to 250 million US$. These benefits outweigh expected costs of 92 million US$ per year. Diesel retrofits are but one step that should viewed in the context of other efforts--such as development of an integrated public transportation system, promotion of the rational use of cars, reduction of emissions from industrial sources and fires, and redesign of the Mexico City Metropolitan Area to reduce urban sprawl--that must be analyzed and implemented to substantially control air pollution and protect public health. Even if considering other potential public health interventions, which would offer greater benefits at the same or lower costs, only by conducting, promoting, and publishing this sort of analyses, we can make strides to improve public health cost-effectively.

Amorphous Mixtures of Ice and C60 Fullerene.

Carbon and ice make up a substantial proportion of our universe. Recent space exploration has shown that these two chemical species often coexist such as on comets and asteroids and in the interstellar medium. Here, we prepare mixtures of C60 fullerene and H2O by vapor codeposition at 90 K with molar C60/H2O ratios ranging from 1:1254 to 1:5. The C60 percolation threshold is found between the 1:132 and 1:48 samples, corresponding to a transition from matrix-isolated C60 molecules to percolating C60 domains that confine H2O. Below this threshold, the crystallization and thermal desorption properties of H2O are not significantly affected by C60, whereas the crystallization temperature of H2O is shifted toward higher temperatures for the C60-rich samples. These C60-rich samples also display exotherms corresponding to the crystallization of C60 as the two components undergo phase separation. More than 60 vol % C60 is required to significantly affect the desorption properties of H2O. A thick blanket of C60 on top of pure amorphous ice is found to display large cracks due to water desorption. These findings may help us to understand the recently observed unusual surface features and the H2O weather cycle on the 67P/Churyumov-Gerasimenko comet.

Average and Local Structure of Apatite-Type Germanates and Implications for Oxide Ion Conductivity.

Materials with the apatite structure have a range of important applications in which their function is influenced by details of their local structure. Here, we describe an average and local structural study to probe the origins of high-temperature oxide ion mobility in La10(GeO4)6O3 and La8Bi2(GeO4)6O3 oxygen-excess materials, using the low-conductivity interstitial oxide-free La8Sr2(GeO4)6O2 as a benchmark. For La10 and La8Bi2, we locate the interstitial oxygen, Oint, responsible for conductivity by Rietveld refinement and relate the P63/m to P1̅ phase transitions on cooling to oxygen ordering. Local structural studies using neutron total scattering reveal that well-ordered GeO5 square pyramidal groups form in the structure at low temperature, but that Oint becomes significantly more disordered in the high-conductivity, high-temperature structures, with a transition to more trigonal-bipyramid-like average geometry. We relate the higher conductivity of Bi materials to the presence of several Oint sites of similar energy in the structure, which correlates with its less-distorted low-temperature average structure.

Global Effect Factors for Exposure to Fine Particulate Matter.

We evaluate fine particulate matter (PM2.5) exposure-response models to propose a consistent set of global effect factors for product and policy assessments across spatial scales and across urban and rural environments. Relationships among exposure concentrations and PM2.5-attributable health effects largely depend on location, population density, and mortality rates. Existing effect factors build mostly on an essentially linear exposure-response function with coefficients from the American Cancer Society study. In contrast, the Global Burden of Disease analysis offers a nonlinear integrated exposure-response (IER) model with coefficients derived from numerous epidemiological studies covering a wide range of exposure concentrations. We explore the IER, additionally provide a simplified regression as a function of PM2.5 level, mortality rates, and severity, and compare results with effect factors derived from the recently published global exposure mortality model (GEMM). Uncertainty in effect factors is dominated by the exposure-response shape, background mortality, and geographic variability. Our central IER-based effect factor estimates for different regions do not differ substantially from previous estimates. However, IER estimates exhibit significant variability between locations as well as between urban and rural environments, driven primarily by variability in PM2.5 concentrations and mortality rates. Using the IER as the basis for effect factors presents a consistent picture of global PM2.5-related effects for use in product and policy assessment frameworks.

Understanding the Behavior of the Above-Room-Temperature Molecular Ferroelectric 5,6-Dichloro-2-methylbenzimidazole Using Symmetry Adapted Distortion Mode Analysis.

The exploitable properties of many functional materials are intimately linked with symmetry-changing phase transitions. These include properties such as ferroelectricity, second harmonic generation, conductivity, magnetism and many others. We describe a new symmetry-inspired method for systematic and exhaustive evaluation of the symmetry changes possible in molecular systems using molecular distortion modes, and how different models can be automatically tested against diffraction data. The method produces a quantitative structural landscape from which the most appropriate structural description of a child phase can be chosen. It can be applied to any molecular or molecular-fragment containing material where a (semi) rigid molecule description is appropriate. We exemplify the method on 5,6-dichloro-2-methylbenzimidazole (DC-MBI), an important molecular ferroelectric. We show that DC-MBI undergoes an unusual symmetry-lowering transition on warming from orthorhombic Pca21 ( T ≲ 400 K) to monoclinic Pc. Contrary to expectations, the high temperature phase of DC-MBI remains polar.

Prevalence of primary ciliary dyskinesia in consecutive referrals of suspect cases and the transmission electron microscopy detection rate: a systematic review and meta-analysis.

Diagnostic testing for primary ciliary dyskinesia (PCD) usually includes transmission electron microscopy (TEM), nasal nitric oxide, high-speed video microscopy, and genetics. Diagnostic performance of each test should be assessed toward the development of PCD diagnostic algorithms. We systematically reviewed the literature and quantified PCD prevalence among referrals and TEM detection rate in confirmed PCD patients. Major electronic databases were searched until December 2015 using appropriate terms. Included studies described cohorts of consecutive PCD referrals in which PCD was confirmed by at least TEM and one additional test, in order to compare the index test performance with other test(s). Meta-analyses of pooled PCD prevalence and TEM detection rate across studies were performed. PCD prevalence among referrals was 32% (95% CI: 25-39%, I2 = 92%). TEM detection rate among PCD patients was 83% (95% CI: 75-90%, I2 = 90%). Exclusion of studies reporting isolated inner dynein arm defects as PCD, reduced TEM detection rate and explained an important fraction of observed heterogeneity (74%, 95% CI: 66-83%, I2 = 66%). Approximately, one third of referrals, are diagnosed with PCD. Among PCD patients, a significant percentage, at least as high as 26%, is missed by TEM, a limitation that should be accounted toward the development of an efficacious PCD diagnostic algorithm.

An Exhaustive Symmetry Approach to Structure Determination: Phase Transitions in Bi2Sn2O7.

The exploitable properties of many materials are intimately linked to symmetry-lowering structural phase transitions. We present an automated and exhaustive symmetry-mode method for systematically exploring and solving such structures which will be widely applicable to a range of functional materials. We exemplify the method with an investigation of the Bi2Sn2O7 pyrochlore, which has been shown to undergo transitions from a parent γ cubic phase to ß and α structures on cooling. The results include the first reliable structural model for ß-Bi2Sn2O7 (orthorhombic Aba2, a = 7.571833(8), b = 21.41262(2), and c = 15.132459(14) Å) and a much simpler description of α-Bi2Sn2O7 (monoclinic Cc, a = 13.15493(6), b = 7.54118(4), and c = 15.07672(7) Å, ß = 125.0120(3)°) than has been presented previously. We use the symmetry-mode basis to describe the phase transition in terms of coupled rotations of the Bi2O' anti-cristobalite framework, which allow Bi atoms to adopt low-symmetry coordination environments favored by lone-pair cations.

Synthesis, structural characterization, and physical properties of the new transition metal oxyselenide Ce2O2ZnSe2.

The quaternary transition metal oxyselenide Ce2O2ZnSe2 has been shown to adopt a ZrCuSiAs-related structure with Zn(2+) cations in a new ordered arrangement within [ZnSe2](2-) layers. The color of the compound changes as a function of cell volume, which can vary by ∼0.4% under different synthetic conditions. At the highest, intermediate, and lowest cell volumes, the color is yellow-ochre, brown, and black, respectively. The decreased volume is attributed to oxidation of Ce from 3+ to 4+, the extent of which can be controlled by synthetic conditions. Ce2O2ZnSe2 is a semiconductor at all cell volumes with experimental optical band gaps of 2.2, 1.4, and 1.3 eV for high, intermediate, and low cell volume samples, respectively. SQUID measurements show Ce2O2ZnSe2 to be paramagnetic from 2 to 300 K with a negative Weiss temperature of θ = -10 K, suggesting weak antiferromagnetic interactions.

Infinitely Adaptive Transition-Metal Ordering in Ln2O2MSe2-Type Oxychalcogenides.

A number of Ln2O2MSe2 (Ln = La and Ce; M = Fe, Zn, Mn, and Cd) compounds, built from alternating layers of fluorite-like [Ln2O2](2+) sheets and antifluorite-like [MSe2](2-) sheets, have recently been reported in the literatures. The available MSe4/2 tetrahedral sites are half-occupied, and different compositions display different ordering patterns: [MSe2](2-) layers contain MSe4/2 tetrahedra that are exclusively edge-sharing (stripe-like), exclusively corner-sharing (checkerboard-like), or mixtures of both. This paper reports 60 new compositions in this family. We reveal that the transition-metal arrangement can be systematically controlled by either Ln or M doping, leading to an "infinitely adaptive" structural family. We show how this is achieved in La2O2Fe1-xZnxSe2, La2O2Zn1-xMnxSe2, La2O2Mn1-xCdxSe2, Ce2O2Fe1-xZnxSe2, Ce2O2Zn1-xMnxSe2, Ce2O2Mn1-xCdxSe2, La2-yCeyO2FeSe2, La2-yCeyO2ZnSe2, La2-yCeyO2MnSe2, and La2-yCeyO2CdSe2 solid solutions.

Thermodynamics of engineered gold binding peptides: establishing the structure-activity relationships.

Adsorption behavior of a gold binding peptide was experimentally studied to achieve kinetics and thermodynamics parameters toward understanding of the binding of an engineered peptide onto a solid metal surface. The gold-binding peptide, GBP1, was originally selected using a cell surface display library and contains 14 amino acid residues. In this work, single- and three-repeats of GBP1 were used to assess the effects of two parameters: molecular architecture versus secondary structure on adsorption on to gold substrate. The adsorption measurements were carried out using surface plasmon resonance (SPR) spectroscopy at temperatures ranging from 10 to 55 °C. At all temperatures, two different regimes of peptide adsorption were observed, which, based on the model, correspond to two sets of thermodynamics values. The values of enthalpy, ΔH(ads), and entropy, ΔS(ads), in these two regimes were determined using the van't Hoff approach and Gibbs-Helmholtz relationship. In general, the values of enthalpy for both peptides are negative indicating GBP1 binding to gold is an exothermic phenomenon and that the binding of three repeat gold binding peptide (3l-GBP1) is almost 5 times tighter than that for the single repeat (l-GBP1). More intriguing result is that the entropy of adsorption for the 3l-GBP1 is negative (-43.4 ± 8.5 cal/(mol K)), while that for the l-GBP1 is positive (10.90 ± 1.3 cal/(mol K)). Among a number of factors that synergistically contribute to the decrease of entropy, long-range ordered self-assembly of the 3l-GBP1 on gold surface is the most effective, probably through both peptide-solid and peptide-peptide intermolecular interactions. Additional adsorption experiments were conducted in the presence of 2,2,2-trifluoroethanol (TFE) to determine how the conformational structures of the biomolecules responded to the environmental perturbation. We found that the peptides differ in their conformational responses to the change in solution conditions; while l-GBP does not fold in the presence of TFE, 3l-GBP1 adopted two types of secondary structure (ß-strand, α-helix) and that peptide's binding to the solid is enhanced by the presence of low percentages of TFE solvent. Not only do these kinetics and thermodynamics results provide adsorption behavior and binding of genetically engineered peptides for inorganics (GEPI), but they could also provide considerable insights into fundamental understanding peptide molecular recognition and their selective specificity for the solids. Moreover, comprehensive work described herein suggests that multiple repeat forms of the solid binding peptides possess a conformational component that can be exploited to further tailor affinity and binding of a given sequence to a solid material followed by ordered assembly as a convenient tool in future practical applications.

PM10 concentration levels at an urban and background site in Cyprus: the impact of urban sources and dust storms.

Air quality in Cyprus is influenced by both local and transported pollution, including desert dust storms. We examined PM10 concentration data collected in Nicosia (urban representative) from April 1, 1993, through December 11, 2008, and in Ayia Marina (rural background representative) from January 1, 1999, through December 31, 2008. Measurements were conducted using a Tapered Element Oscillating Micro-balance (TEOM). PM10 concentrations, meteorological records, and satellite data were used to identify dust storm days. We investigated long-term trends using a Generalized Additive Model (GAM) after controlling for day of week, month, temperature, wind speed, and relative humidity. In Nicosia, annual PM10 concentrations ranged from 50.4 to 63.8 µg/m3 and exceeded the EU annual standard limit enacted in 2005 of 40 µg/m3 every year A large, statistically significant impact of urban sources (defined as the difference between urban and background levels) was seen in Nicosia over the period 2000-2008, and was highest during traffic hours, weekdays, cold months, and low wind conditions. Our estimate of the mean (standard error) contribution of urban sources to the daily ambient PM10 was 24.0 (0.4) µg/m3. The study of yearly trends showed that PM10 levels in Nicosia decreased from 59.4 µg/m3 in 1993 to 49.0 µg/m3 in 2008, probably in part as a result of traffic emission control policies in Cyprus. In Ayia Marina, annual concentrations ranged from 27.3 to 35.6 µg/m3, and no obvious time trends were observed. The levels measured at the Cyprus background site are comparable to background concentrations reported in other Eastern Mediterranean countries. Average daily PM10 concentrations during desert dust storms were around 100 µg/m3 since 2000 and much higher in earlier years. Despite the large impact ofdust storms and their increasing frequency over time, dust storms were responsible for a small fraction of the exceedances of the daily PM10 limit. Implications: This paper examines PM10 concentrations in Nicosia, Cyprus, from 1993 to 2008. The decrease in PM10 levels in Nicosia suggests that the implementation of traffic emission control policies in Cyprus has been effective. However, particle levels still exceeded the European Uion annual standard, and dust storms were responsible for a small fraction of the daily PM10 limit exceedances. Other natural particles that are not assessed in this study, such as resuspended soil and sea salt, may be responsible in part for the hig particle levels.

Local Structure and Dynamics in MPt(CN)6 Prussian Blue Analogues.

We use a combination of X-ray pair distribution function (PDF) measurements, lattice dynamical calculations, and ab initio density functional theory (DFT) calculations to study the local structure and dynamics in various MPt(CN)6 Prussian blue analogues. In order to link directly the local distortions captured by the PDF with the lattice dynamics of this family, we develop and apply a new "interaction-space" PDF refinement approach. This approach yields effective harmonic force constants, from which the (experiment-derived) low-energy phonon dispersion relations can be approximated. Calculation of the corresponding Grüneisen parameters allows us to identify the key modes responsible for negative thermal expansion (NTE) as arising from correlated tilts of coordination octahedra. We compare our results against the phonon dispersion relations determined using DFT calculations, which identify the same NTE mechanism.

Systematic and controllable negative, zero, and positive thermal expansion in cubic Zr(1-x)Sn(x)Mo2O8.

We describe the synthesis and characterization of a family of materials, Zr1-xSnxMo2O8 (0 < x < 1), whose isotropic thermal expansion coefficient can be systematically varied from negative to zero to positive values. These materials allow tunable expansion in a single phase as opposed to using a composite system. Linear thermal expansion coefficients, αl, ranging from -7.9(2) × 10(-6) to +5.9(2) × 10(-6) K(-1) (12-500 K) can be achieved across the series; contraction and expansion limits are of the same order of magnitude as the expansion of typical ceramics. We also report the various structures and thermal expansion of "cubic" SnMo2O8, and we use time- and temperature-dependent diffraction studies to describe a series of phase transitions between different ordered and disordered states of this material.