The crystal structure of a Thermus thermophilus tRNA(Gly) acceptor stem microhelix at 1.6 Å resolution.

tRNAs are aminoacylated with the correct amino acid by the cognate aminoacyl-tRNA synthetase. The tRNA/synthetase systems can be divided into two classes: class I and class II. Within class I, the tRNA identity elements that enable the specificity consist of complex sequence and structure motifs, whereas in class II the identity elements are assured by few and simple determinants, which are mostly located in the tRNA acceptor stem. The tRNA(Gly)/glycyl-tRNA-synthetase (GlyRS) system is a special case regarding evolutionary aspects. There exist two different types of GlyRS, namely an archaebacterial/human type and an eubacterial type, reflecting the evolutionary divergence within this system. We previously reported the crystal structures of an Escherichia coli and of a human tRNA(Gly) acceptor stem microhelix. Here we present the crystal structure of a thermophilic tRNA(Gly) aminoacyl stem from Thermus thermophilus at 1.6Å resolution and provide insight into the RNA geometry and hydration.

Crystal structure of a human tRNA(Gly) microhelix at 1.2A resolution.

The tRNA(Gly)/glycyl-tRNA synthetase (GlyRS) system belongs to the so-called 'class II aminoacyl-tRNA synthetase system' in which tRNA identity elements are assured by rather few and simple determinants mostly located in the tRNA acceptor stem. Regarding evolutionary aspects, the tRNA(Gly)/GlyRS system is a special case. There exist two different types of GlyRS, namely an archaebacterial/human type and a eubacterial type reflecting an evolutionary divergence within this system. Here we report the crystal structure of a human tRNA(Gly) acceptor stem microhelix at 1.2A resolution. The local geometric parameters of the microhelix and the water network surrounding the RNA are presented. The structure complements the previously published Escherichia coli tRNA(Gly) aminoacyl stem structure.

Comparative X-ray structure analysis of human and Escherichia coli tRNA(Gly) acceptor stem microhelices.

tRNA identity elements assure the correct aminoacylation of tRNAs by the aminoacyl-tRNA synthetases with the cognate amino acid. The tRNA(Gly)/glycyl-tRNA sythetase system is member of the so-called 'class II system' in which the tRNA determinants consist of rather simple elements. These are mostly located in the tRNA acceptor stem and in the glycine case additionally the discriminator base at position 73 is required. Within the glycine-tRNA synthetases, the archaebacterial/human and the eubacterial sytems differ with respect to their protein structures and the required tRNA identity elements, suggesting a unique evolutionary divergence. In this study, we present a comparison between the crystal structures of the eubacterial Escherichia coli and the human tRNA(Gly) acceptor stem microhelices and their surrounding hydration patterns.

Mirror-image RNA that binds D-adenosine.

A 58-mer L-RNA ligand that binds to naturally occurring D-adenosine with a dissociation constant of 1.7 microM in solution was identified from a combinatorial library employing mirror-design. The corresponding D-RNA ligand shows identical binding affinity to L-adenosine. Reciprocal chiral specificity was also evident from ligand discrimination; the binding affinity of the L-RNA ligand for D-adenosine was 9000-fold greater than its affinity for L-adenosine and vice versa. While the D-RNA ligand was rapidly degraded in human serum, the L-RNA ligand displayed an extraordinary stability. This indicates the potential application of specifically designed L-RNA ligands as stable monoclonal antibody analogues and the development of highly stable L-ribozymes.

Mirror-design of L-oligonucleotide ligands binding to L-arginine.

The high affinity and selectivity of nucleic acid ligands have clearly demonstrated that RNA can be targeted to a variety of molecules. In practice, however, the use of unmodified aptamers is impeded by the low stability of RNA in biological fluids. Here we describe the mirror-design of a stable 38-mer L-oligoribonucleotide ligand that binds to L-arginine. This L-RNA ligand was also able to bind to a short peptide containing the basic region of the human immunodeficiency virus type-1 Tat-protein. The L-RNA ligand displayed the expected stability in human serum. These findings may contribute to the identification of novel diagnostics and pharmaceuticals.

Crystal structure of an RNA dodecamer containing the Escherichia coli Shine-Dalgarno sequence.

The synthetic dodecameric RNA fragment rUAAGGAGGUGAU resembles a region upstream of the initiation site in prokaryotic mRNAs whereas the pyrimidine-rich complementary strand is identical to the last 12 nucleotides of Escherichia coli 16 S rRNA. The complex thus serves as a model for the Shine-Dalgarno interaction which is required for proper initiation of translation. The crystal structure of rUAAGGAGGUGUA.rAUCACCUCCUUA has been determined at 2.6 A resolution and refined against 2957 1 sigma(F) structure amplitudes to an R-value of 0.195. The unit cell of the triclinic crystals contains two double-stranded RNA molecules. The conformation of the two duplexes is similar, with a root-mean-square deviation of 0.683 A between equivalent atoms, and resembles calf thymus A-DNA as determined by X-ray fiber diffraction methods. Both molecules from continuous helices that penetrate the entire crystal, but the dinucleotide step in between dodecameric duplexes has an unusual geometry with a negative twist angle. The long helices cross over each other in a characteristic manner by inserting the backbone of one molecule into the minor groove of another. These contacts are stabilized by several direct intermolecular hydrogen bonds most of which are mediated by 2'-hydroxyl groups of the ribose sugars suggesting a general mode for the interaction between RNA molecules which is different from DNA-DNA interactions.

Molecular cloning of the plasmid RP4 primase region in a multi-host-range tacP expression vector.

Plasmid RP4 primase was overproduced by utilizing autoregulated high-level expression vector systems in Escherichia coli and in four other Gram-negative bacterial species. Analysis of the products in E. coli revealed that in addition to the two primase polypeptides of 118 and 80 kDa the pri region of RP4 encodes two smaller proteins of 16.5 and 8.6 kDa. The transcript for the four RP4-specified products is polycistronic. The vector system used in E. coli is based on the plasmid pKK223-3 (Brosius and Holy, 1984), a ColE1-type replicon which contains a polylinker sequence flanked on one side by the controllable tac promoter and on the other side by two strong transcriptional terminators. The gene for the lac repressor (lacIQ) was inserted to render the use of the plasmid independent from repressor-overproducing strains. The gene cartridge essential for high-level expression and selection was combined with the RSF1010 replicon to generate a vector plasmid functioning in a wide variety of Gram-negative hosts. The versatility of the vector family was extended by constructing derivatives that contain the polylinker in inverted orientation relative to the tac promoter. Therefore, the orientation of the cloned fragment can be chosen by 'forced cloning' into the appropriately selected vector.

Crystallization and preliminary diffraction studies of the structural domain E of Thermus flavus 5S rRNA.

The ribosomal 5S RNA is an essential constituent of the large ribosomal subunit. To overcome the difficulties of crystallizing large RNA molecules such as 5S rRNAs, we decided to divide the 5S rRNA in five domains A through E to determine their structure. Recently we determined the crystal structural of the helical domain A. Here we report the crystallization of the chemically synthesized domain E of the Thermus flavus 5S rRNA. The crystal form is trigonal with unit cell dimensions: a = b = 42.80 A and c = 162.20 A. Diffraction-data to 2.8 A have been recorded and the structure solution is currently underway by means of MIR and MAD techniques.

Crystal structure of domain A of Thermus flavus 5S rRNA and the contribution of water molecules to its structure.

This is the first high resolution crystal structure of an RNA molecule made by solid phase chemical synthesis and representing a natural RNA. The structure of the domain A of Thermus flavus ribosomal 5S RNA is refined to R = 18% at 2.4 A including 159 solvent molecules. Most of the 2'-hydroxyl groups as well as the phosphate oxygens are involved either in specific hydrogen bonds in intermolecular contacts or to solvent molecules. The two U-G and G-U base-pairs are stabilized by H-bonds supplied via three water molecules to compensate for the lack of base-pair hydrogen bonds. The structure shows for the first time in detail the importance of highly ordered internal water in stabilizing an RNA structure.

Initial analysis of 750 MHz NMR spectra of selective 15N-G,U labelled E. coli 5S rRNA.

The overall folding of an RNA molecule is reflected in its base pairing pattern. The identification of that pattern provides a first step towards the determination of the structure of an RNA molecule. We show that the application of heteronuclear NMR methods at 750 MHz to E. coli 5S rRNA (120 nucleotides) selectively labelled with 15N in guanine and uridine allows observation of base pairing patterns for a larger RNA molecule. We also present evidence that the fold of the E-domain of the 5S rRNA (nt 79-97) as a contiguous part of the 5S rRNA and as an isolated molecule is virtually the same.

High pressure effects on conformation of homo- and heteroduplexes of nucleic acids.

Four different chemically synthesized single stranded complementary oligonucleotides: DNA I, d(GCGCGCATATAT); RNA I, r(AUAUAUGCGCGC): RNA II, r(GGCCGGUUAAUU); and RNA III, r(AAUUAACCGGCC) were studied in order that the effects of high pressure on heteroduplex and homoduplex structures could be understood. The oligonucleotides were subjected to a high pressure at low and/or high salt buffer and analyzed by circular dichroism spectroscopy. In these conditions, both DNA-RNA and RNA-RNA duplexes with different purine-pyrimidine sequences change their conformation. The heteroduplex DNA I-RNA I with the complementary alternating purine-pyrimidine sequence, does not change its conformation of A type at high salt alone or at high salt and high pressure applied together. The homoduplex RNA II-RNA III with purine-purine-pyrimidine-pyrimidine sequence does not change strongly its. A-RNA conformation either. However, a structure of the homoduplex is affected by high pressure alone or with high salt as concluded from shifting the maximum of the CD spectrum to around 265 nm and inducing higher Cotton effect. These observations clearly suggest some conformational changes of the homoduplex. A single stranded oligonucleotide (RNA I) and oligodeoxynucleotide (DNA I) alone showed up a different conformation. The CD spectrum of RNA I is similar to that of A-RNA structure, out that of DNA I shows a very small Cotton effect and has not an ordered structure.

Nucleic acid based sensors.

Nucleic acids may be analyte or molecular recognition elements in biosensors. Both aspects merge in the genosensor approach, where detection of special sequences is facilitated by hybridization of a target nucleic acid to a complementary immobilized template. All three roles of nucleic acids in biosensors are discussed and the state of sensor development reviewed. With the invention of evolutionary synthesis strategies applied to nucleic acids new types of biomolecular receptors are accessible. The impact of aptamers and ribozymes on biosensor development is discussed.

A-Z-RNA conformational changes effected by high pressure.

This paper reports evidence obtained by circular dichroism (CD) spectroscopy measurements indicating that two oligoribonucleotide duplexes with the alternating purine-pyrimidine sequences r(GC)6 or r(AU)6 change their A-RNA conformation under high pressure. Under the high-pressure conditions at which B-Z-DNA transition easily occurs, RNA acquires a conformation which only differs slightly from that of A-RNA. However, exposure of r(GC)6 or r(AU)6 to high pressure (6 kbar) in the presence of 5 M NaCl causes a conformation change of both oligoribonucleotide duplexes from their A- to their Z-RNA form. The departure of RNA or DNA duplexes from their original conformations under high pressure depends on the water structure itself and involves displacing an active (structural) water molecule outside the nucleic acid molecules. Experiments carried out until now in many laboratories have shown that B-Z or A-Z transitions of DNA or RNA, respectively, do not depend on the conditions applied, but the common mechanism for these processes seems to be dehydration. This same effect can be observed either at high salt concentrations or in the presence of an alcohol or at high pressure. Our results also support the view that the higher stability of RNA compared with DNA duplexes is due to the strong interaction of the 2'-hydroxyl groups of RNA with water molecules.

Superposition of a tRNASer acceptor stem microhelix into the seryl-tRNA synthetase complex.

Aminoacyl-tRNA synthetases catalyze the formation of aminoacyl-tRNAs. Seryl-tRNA synthetase is a class II synthetase, which depends on rather few and simple identity elements in tRNA(Ser) to determine the amino acid specificity. tRNA(Ser) acceptor stem microhelices can be aminoacylated with serine, which makes this part of the tRNA a valuable tool for investigating the structural motifs in a tRNA(Ser)-seryl-tRNA synthetase complex. A 1.8A-resolution tRNA(Ser) acceptor stem crystal structure was superimposed to a 2.9A-resolution crystal structure of a tRNA(Ser)-seryl-tRNA synthetase complex for a visualization of the binding environment of the tRNA(Ser) microhelix.

Crystal structure of an Escherichia coli tRNA(Gly) microhelix at 2.0 A resolution.

tRNA identity elements determine the correct aminoacylation by the cognate aminoacyl-tRNA synthetase. In class II aminoacyl tRNA synthetase systems, tRNA specificity is assured by rather few and simple recognition elements, mostly located in the acceptor stem of the tRNA. Here we present the crystal structure of an Escherichia coli tRNA(Gly) aminoacyl stem microhelix at 2.0 A resolution. The tRNA(Gly) microhelix crystallizes in the space group P3(2)21 with the cell constants a=b=35.35 A, c=130.82 A, gamma=120 degrees . The helical parameters, solvent molecules and a potential magnesium binding site are discussed.

Selection of high affinity RNA ligands to a synthetic peptide of human rhinovirus 14 coat protein.

We have used the in vitro evolution system (SELEX) to isolate high affinity RNAs which block the canyon region of Human Rhinovirus 14 (HRV 14). Since the genetic diversity of HRV has hampered the development of general anti-rhinovirus vaccines, high affinity RNAs may have good advantage for therapeutic application for the human cold.

TraJ protein of plasmid RP4 binds to a 19-base pair invert sequence repetition within the transfer origin.

Transfer of plasmid RP4 during bacterial conjugation requires the plasmid-encoded TraJ protein, which binds to the transfer origin (Fürste, J. P., Pansegrau, W., Ziegelin, G., Kröger, M., and Lanka, E. (1989) Proc. Natl. Acad. Sci. U.S.A. 86, 1771-1775). As indicated by traJ mutants, the TraJ protein is a constituent of the relaxosome, the initiation complex of transfer DNA replication. The traJ gene maps adjacent to the transfer origin (oriT). The structural gene consists of a 372-base pair sequence encoding a polypeptide of 122 amino acids (13,282 Da). TraJ was purified from an Escherichia coli strain overproducing the protein. DNA footprinting experiments involving DNase I demonstrated that the purified protein binds to the right arm of a 19-base pair inverted repeat within oriT. Hydroxyl radical footprints of the DNA-protein complex revealed that TraJ protein is bound to only one side of the DNA helix.

Molecular cloning and mapping of SphI restriction fragments of plasmid RP4.

A combined physical and functional map of plasmid RP4 is presented including the sites for 18 restriction endonucleases. Several cleavage sites of SphI, BalI, and ApaI are suitable for the dissection of the transfer gene regions. Recombinant plasmids containing RP4 SphI fragments were constructed to assist in localizing sites relative to each other and to assign functions conferred by RP4 to the host.