Surface tension prevails over solute effect in organic-influenced cloud droplet activation.

The spontaneous growth of cloud condensation nuclei (CCN) into cloud droplets under supersaturated water vapour conditions is described by classic Köhler theory. This spontaneous activation of CCN depends on the interplay between the Raoult effect, whereby activation potential increases with decreasing water activity or increasing solute concentration, and the Kelvin effect, whereby activation potential decreases with decreasing droplet size or increases with decreasing surface tension, which is sensitive to surfactants. Surface tension lowering caused by organic surfactants, which diminishes the Kelvin effect, is expected to be negated by a concomitant reduction in the Raoult effect, driven by the displacement of surfactant molecules from the droplet bulk to the droplet-vapour interface. Here we present observational and theoretical evidence illustrating that, in ambient air, surface tension lowering can prevail over the reduction in the Raoult effect, leading to substantial increases in cloud droplet concentrations. We suggest that consideration of liquid-liquid phase separation, leading to complete or partial engulfing of a hygroscopic particle core by a hydrophobic organic-rich phase, can explain the lack of concomitant reduction of the Raoult effect, while maintaining substantial lowering of surface tension, even for partial surface coverage. Apart from the importance of particle size and composition in droplet activation, we show by observation and modelling that incorporation of phase-separation effects into activation thermodynamics can lead to a CCN number concentration that is up to ten times what is predicted by climate models, changing the properties of clouds. An adequate representation of the CCN activation process is essential to the prediction of clouds in climate models, and given the effect of clouds on the Earth's energy balance, improved prediction of aerosol-cloud-climate interactions is likely to result in improved assessments of future climate change.

Historical Changes in Seasonal Aerosol Acidity in the Po Valley (Italy) as Inferred from Fog Water and Aerosol Measurements.

Acidity profoundly affects almost every aspect that shapes the composition of ambient particles and their environmental impact. Thermodynamic analysis of gas-particle composition datasets offers robust estimates of acidity, but they are not available for long periods of time. Fog composition datasets, however, are available for many decades; we develop a thermodynamic analysis to estimate the ammonia in equilibrium with fog water and to infer the pre-fog aerosol pH starting from fog chemical composition and pH. The acidity values from the new method agree with the results of thermodynamic analysis of the available gas-particle composition data. Applying the new method to historical (25 years) fog water composition at the rural station of San Pietro Capofiume (SPC) in the Po Valley (Italy) suggests that the aerosol has been mildly acidic, with its pH decreasing by 0.5-1.5 pH units over the last decades. The observed pH of the fog water also increased 1 unit over the same period. Analysis of the simulated aerosol pH reveals that the aerosol acidity trend is driven by a decrease in aerosol precursor concentrations, and changes in temperature and relative humidity. Currently, NOx controls would be most effective for PM2.5 reduction in the Po valley both during summer and winter. In the future, however, seasonal transitions to the NH3-sensitive region may occur, meaning that the NH3 reduction policy may become increasingly necessary.

Direct observation of aqueous secondary organic aerosol from biomass-burning emissions.

The mechanisms leading to the formation of secondary organic aerosol (SOA) are an important subject of ongoing research for both air quality and climate. Recent laboratory experiments suggest that reactions taking place in the atmospheric liquid phase represent a potentially significant source of SOA mass. Here, we report direct ambient observations of SOA mass formation from processing of biomass-burning emissions in the aqueous phase. Aqueous SOA (aqSOA) formation is observed both in fog water and in wet aerosol. The aqSOA from biomass burning contributes to the "brown" carbon (BrC) budget and exhibits light absorption wavelength dependence close to the upper bound of the values observed in laboratory experiments for fresh and processed biomass-burning emissions. We estimate that the aqSOA from residential wood combustion can account for up to 0.1-0.5 Tg of organic aerosol (OA) per y in Europe, equivalent to 4-20% of the total OA emissions. Our findings highlight the importance of aqSOA from anthropogenic emissions on air quality and climate.

Exposure to urban nanoparticles at low PM[Formula: see text] concentrations as a source of oxidative stress and inflammation.

Exposures to fine particulate matter (PM[Formula: see text]) have been associated with health impacts, but the understanding of the PM[Formula: see text] concentration-response (PM[Formula: see text]-CR) relationships, especially at low PM[Formula: see text], remains incomplete. Here, we present novel data using a methodology to mimic lung exposure to ambient air (2[Formula: see text] 60 [Formula: see text]g m[Formula: see text]), with minimized sampling artifacts for nanoparticles. A reference model (Air Liquid Interface cultures of human bronchial epithelial cells, BEAS-2B) was used for aerosol exposure. Non-linearities observed in PM[Formula: see text]-CR curves are interpreted as a result of the interplay between the aerosol total oxidative potential (OP[Formula: see text]) and its distribution across particle size (d[Formula: see text]). A d[Formula: see text]-dependent condensation sink (CS) is assessed together with the distribution with d[Formula: see text] of reactive species . Urban ambient aerosol high in OP[Formula: see text], as indicated by the DTT assay, with (possibly copper-containing) nanoparticles, shows higher pro-inflammatory and oxidative responses, this occurring at lower PM[Formula: see text] concentrations (< 5 [Formula: see text]g m[Formula: see text]). Among the implications of this work, there are recommendations for global efforts to go toward the refinement of actual air quality standards with metrics considering the distribution of OP[Formula: see text] with d[Formula: see text] also at relatively low PM[Formula: see text].

High frequency new particle formation in the Himalayas.

Rising air pollution levels in South Asia will have worldwide environmental consequences. Transport of pollutants from the densely populated regions of India, Pakistan, China, and Nepal to the Himalayas may lead to substantial radiative forcing in South Asia with potential effects on the monsoon circulation and, hence, on regional climate and hydrological cycles, as well as to dramatic impacts on glacier retreat. An improved description of particulate sources is needed to constrain the simulation of future regional climate changes. Here, the first evidence of very frequent new particle formation events occurring up to high altitudes is presented. A 16-month record of aerosol size distribution from the Nepal Climate Observatory at Pyramid (Nepal, 5,079 m above sea level), the highest atmospheric research station, is shown. Aerosol concentrations are driven by intense ultrafine particle events occurring on >35% of the days at the interface between clean tropospheric air and the more polluted air rising from the valleys. During a pilot study, we observed a significant increase of ion cluster concentrations with the onset of new particle formation events. The ion clusters rapidly grew to a 10-nm size within a few hours, confirming, thus, that in situ nucleation takes place up to high altitudes. The initiation of the new particle events coincides with the shift from free tropospheric downslope winds to thermal upslope winds from the valley in the morning hours. The new particle formation events represent a very significant additional source of particles possibly injected into the free troposphere by thermal winds.

Biogenically driven organic contribution to marine aerosol.

Marine aerosol contributes significantly to the global aerosol load and consequently has an important impact on both the Earth's albedo and climate. So far, much of the focus on marine aerosol has centred on the production of aerosol from sea-salt and non-sea-salt sulphates. Recent field experiments, however, have shown that known aerosol production processes for inorganic species cannot account for the entire aerosol mass that occurs in submicrometre sizes. Several experimental studies have pointed to the presence of significant concentrations of organic matter in marine aerosol. There is some information available about the composition of organic matter, but the contribution of organic matter to marine aerosol, as a function of aerosol size, as well as its characterization as hydrophilic or hydrophobic, has been lacking. Here we measure the physical and chemical characteristics of submicrometre marine aerosol over the North Atlantic Ocean during plankton blooms progressing from spring through to autumn. We find that during bloom periods, the organic fraction dominates and contributes 63% to the submicrometre aerosol mass (about 45% is water-insoluble and about 18% water-soluble). In winter, when biological activity is at its lowest, the organic fraction decreases to 15%. Our model simulations indicate that organic matter can enhance the cloud droplet concentration by 15% to more than 100% and is therefore an important component of the aerosol-cloud-climate feedback system involving marine biota.

Extensive Soot Compaction by Cloud Processing from Laboratory and Field Observations.

Soot particles form during combustion of carbonaceous materials and impact climate and air quality. When freshly emitted, they are typically fractal-like aggregates. After atmospheric aging, they can act as cloud condensation nuclei, and water condensation or evaporation restructure them to more compact aggregates, affecting their optical, aerodynamic, and surface properties. Here we survey the morphology of ambient soot particles from various locations and different environmental and aging conditions. We used electron microscopy and show extensive soot compaction after cloud processing. We further performed laboratory experiments to simulate atmospheric cloud processing under controlled conditions. We find that soot particles sampled after evaporating the cloud droplets, are significantly more compact than freshly emitted and interstitial soot, confirming that cloud processing, not just exposure to high humidity, compacts soot. Our findings have implications for how the radiative, surface, and aerodynamic properties, and the fate of soot particles are represented in numerical models.

An anion-exchange high-performance liquid chromatography method coupled to total organic carbon determination for the analysis of water-soluble organic aerosols.

The chemical composition of water-soluble organic carbon (WSOC) in atmospheric aerosol particles is largely unexplored, due to the myriad of individual compounds, which has hampered attempts to attain a full characterization at the molecular level. An alternative approach, focusing on the analysis of a few main chemical classes, allowed the quantitative fractionation of WSOC into neutral compounds (NC), mono- and di-acids (MDA) and polyacids (PA) through an anion-exchange liquid chromatographic method. Previous attempts to quantify NC, MDA and PA relied on a low-pressure chromatographic technique using a volatile buffer, followed by total organic carbon (TOC) analysis of the fractions, or alternatively on a faster HPLC-UV method which provided a quantification of the fractions based on empirical relationships between UV signal and TOC concentration. Here, we report an upgraded anion-exchange HPLC technique, allowing direct TOC analysis of the eluted fractions, without any pre-treatment, thus permitting a great simplification of quantitative analysis and preventing sample losses. The new HPLC-TOC methodology, employing completely inorganic eluents shows the same efficiency of the former HPLC-UV method employing organic additives, with the exception of phenolic compounds, which are retained on the column by secondary interactions, and low-molecular weight tricarboxylic acids, which are recovered among MDA. The new anion-exchange liquid chromatographic method can recover a substantial amount (86-100%) of water-soluble organic carbon from atmospheric aerosol extracts, thus allowing a higher retention and fractionation capacity with respect to alternative techniques, like solid phase extraction.

Partitioning of metals between the aqueous phase and suspended insoluble material in fog droplets.

This paper discusses the partitioning of metals (K, Na, Ca, Mg, Al, Cu, Fe, Pb and Zn) between the aqueous phase and the suspended insoluble material in fog samples collected in the Po Valley during two extensive fields campaigns. Metals represent on average 11% of the mass of suspended insoluble matter, while the main component is carbon (both organic carbon, OC = 35%, and black carbon, BC = 8%). The unaccounted suspended matter mass is very high, on average 46%, and is attributable to non metallic species, such as O and N and of Si. The principal metals in the insoluble suspended fraction are Fe and Al (2-5%), while the contributions of other metals (Na, Mg, Cu, Pb and Zn) are lower than 1%. Ca and K exhibited high blank values and could not be detected above blank detection limit threshold. The main components in the aqueous phase are NO3- (34%), WSOC (23%), SO4(2-) (18%) and NH4+ (19%), while trace metals and remaining cations and anions accounted for less than 1% of solute mass. The main dissolved trace metals in fog droplets are Zn, Al and Fe, while the main metallic cations are Na and Ca. Fe and Al are the only metals preferentially distributed in the suspended insoluble matter of fog droplets (partitioning ratio respectively 37% and 33%). All other metals are mostly dissolved in the aqueous phase (mean partitioning ratios of Mg, Pb, Zn, Cu and Na are 69%, 70%, 77%, 81% and 87%). These findings are in agreement with literature data on metal speciation in cloud and rain samples. The dependence of partitioning ratios on pH is investigated for the different metals, with only Al showing a clear partitioning ratio decrease with increasing pH. Conversely, the other metals show no dependence or a complex and highly variable behaviour. The partitioning ratio of iron (mean 37%) observed in the Po Valley fog samples is much higher than the water extractable iron in aerosol particles (typically 1-2 %): this fact can be explained by differences in the aerosol sources and composition among sites and by chemical processes in the aqueous phase, such as complexation and redox reactions involving organic ligands (oxalate, or other organic acids as humic-like organic matter) which may promote Fe solubility.

Connecting marine productivity to sea-spray via nanoscale biological processes: Phytoplankton Dance or Death Disco?

Bursting bubbles at the ocean-surface produce airborne salt-water spray-droplets, in turn, forming climate-cooling marine haze and cloud layers. The reflectance and ultimate cooling effect of these layers is determined by the spray's water-uptake properties that are modified through entrainment of ocean-surface organic matter (OM) into the airborne droplets. We present new results illustrating a clear dependence of OM mass-fraction enrichment in sea spray (OMss) on both phytoplankton-biomass, determined from Chlorophyll-a (Chl-a) and Net Primary Productivity (NPP). The correlation coefficient for OMss as a function of Chl-a increased form 0.67 on a daily timescale to 0.85 on a monthly timescale. An even stronger correlation was found as a function of NPP, increasing to 0.93 on a monthly timescale. We suggest the observed dependence is through the demise of the bloom, driven by nanoscale biological processes (such as viral infections), releasing large quantities of transferable OM comprising cell debris, exudates and other colloidal materials. This OM, through aggregation processes, leads to enrichment in sea-spray, thus demonstrating an important coupling between biologically-driven plankton bloom termination, marine productivity and sea-spray modification with potentially significant climate impacts.

Identification of levoglucosan and related steroisomers in fog water as a biomass combustion tracer by ESI-MS/MS.

A conspicuous fraction of the water soluble organic compounds (WSOC) in fog and fine aerosol samples is composed by monosaccharide anhydrides, such as levoglucosan and its stereoisomers, galactosan and mannosan. Levoglucosan is produced exclusively during wood combustion processes, making it a very useful tracer for plant combustion emissions in the atmosphere. This paper describes a new experimental approach, based on electrospray-tandem mass spectrometry (ESI-MS/MS), for the identification of levoglucosan in fog water samples. The analytical method proposed allows to identify the specific sugar anhydrides directly in the liquid phase without the need of any derivatization process.

On the water-soluble organic nitrogen concentration and mass size distribution during the fog season in the Po Valley, Italy.

The study of organic nitrogen gained importance in recent decades due to its links with acid rain, pollution, and eutrophication. In this study, aerosol and fog water samples collected from two sites in Italy during November 2011 were analyzed to characterize their organic nitrogen content. Organic nitrogen contributed 19-25% of the total soluble nitrogen in the aerosol and around 13% in fog water. The largest water soluble organic nitrogen concentrations in the PM1.2 fraction occurred during the diurnal period with mean values of 2.03 and 2.16 µg-N m(-3) (154 and 145 nmol-N m(-3)) at Bologna and San Pietro Capofiume (SPC), respectively. The mean PM10 WSON concentration during diurnal periods at SPC was 2.30 µg-N m(-3) (164 nmol-N m(-3)) while it was 1.34 and 0.82 µg-N m(-3) (95.7 and 58.5 nmol-N m(-3)) in the night and fog water samples, respectively. Aerosol mass distribution profiles obtained during fog changed significantly with respect to those estimated in periods without fog periods due to fog scavenging, which proved to be over 80% efficient. Linear correlations suggested secondary processes related to combustion and, to a lesser extent, biomass burning, as plausible sources of WSON. Regarding the inorganic nitrogen fraction, the results showed that ammonium was the largest soluble inorganic nitrogen component in the samples.

Important source of marine secondary organic aerosol from biogenic amines.

Relevant concentrations of dimethyl- and diethylammonium salts (DMA+ and DEA+) were measured in submicrometer marine aerosol collected over the North Atlantic during periods of high biological activity (HBA) in clean air masses (median concentration (minimum-maximum)=26(6-56) ng m(-3)). Much lower concentrations were measured during periods of low biological activity (LBA): 1 (<0.4-20) ng m(-3) and when polluted air masses were advected to the sampling site: 2 (<0.2-24) ng m(-3). DMA+ and DEA+ are the most abundantorganic species, second only to MSA, detected in fine marine particles representing on average 11% of the secondary organic aerosol (SOA) fraction and a dominant part (35% on average) of the water-soluble organic nitrogen (WSON). Several observations support the hypothesis that DMA+ and DEA+ have a biogenic oceanic source and are produced through the reaction of gaseous amines with sulfuric acid or acidic sulfates. Moreover, the water-soluble fraction of nascent marine aerosol particles produced by bubble-bursting experiments carried out in parallel to ambient aerosol sampling over the open ocean showed WSON, DMA+, and DEA+ concentrations always below the detection limit, thus excluding an important primary sea spray source.

Combined determination of the chemical composition and of health effects of secondary organic aerosols: the POLYSOA project.

Epidemiological studies show a clear link between increased mortality and enhanced concentrations of ambient aerosols. The chemical and physical properties of aerosol particles causing these health effects remain unclear. A major fraction of the ambient aerosol particle mass is composed of secondary organic aerosol (SOA). Recent studies showed that a significant amount of SOA consists of high molecular weight compounds (oligomers), which are chemically not well characterized. Within the POLYSOA project a large variety of state-of-the-art analytical chemical methods were used to characterize the chemical composition of SOA particles with emphasis on the oligomeric mass fraction. Mass spectrometric results showed that SOA oligomers are highly oxidized compounds and that hydroperoxides are formed, which is consistent with NMR results. This high molecular weight fraction accounts for up to 23% of the total organic carbon in SOA particles. These well-characterized SOA particles were deposited on three lung cell culture systems (microdissected respiratory epithelia from porcine tracheae, the human bronchial epithelial cell line BEAS-2B, and porcine lung surface macrophages obtained by bronchoalveolar lavage) in a newly constructed particle deposition chamber with the goal to eventually identify particle components that are responsible for cell responses leading to adverse health effects. In addition, monolayers of the alveolar epithelial cell line A549 were used in an alveolar epithelial repair model. The lung cells were examined for morphological, biochemical, and physiological changes after exposure to SOA. Analyses of the lung cells after exposure to SOA are ongoing. First data give evidence for a moderate increase of necrotic cell death as measured by lactate dehydrogenase release and for effects on the alveolar epithelial wound repair mainly due to alterations of cell spreading and cell migration at the edge of the wound. Thus, these first results indicate that SOA, in concentrations comparable to environmental concentrations, may induce distinct effects in lung cells.

Source attribution of water-soluble organic aerosol by nuclear magnetic resonance spectroscopy.

The functional group compositions of atmospheric aerosol water-soluble organic compoundswere obtained employing proton nuclear magnetic resonance (1H NMR) spectroscopy in a series of recent experiments in several areas of the world characterized by different aerosol sources and pollution levels. Here, we discuss the possibility of using 1H NMR functional group distributions to identifythe sources of aerosol in the different areas. Despite the limited variability of functional group compositions of atmospheric aerosol samples, characteristic 1H NMR fingerprints were derived for three major aerosol sources: biomass burning, secondary formation from anthropogenic and biogenic VOCs, and emission from the ocean. The functional group patterns obtained in areas characterized by one of the above dominant source processes were then compared to identify the dominant sources for samples coming from mixed sources. This analysis shows that H NMR spectroscopy can profitably be used as a valuable tool for aerosol source identification. In addition, compared to other existing methodologies, it is able to relate the source fingerprints to integral chemical properties of the organic mixtures, which determine their reactivity and their physicochemical properties and ultimately the fate of the organic particles in the atmosphere.