RESUMO
Tapioca processing industries are very popular in the rural community to produce a variety of foods as the end products. Due to their small scales and scattered locations, they require robust modular systems to operate at low capacity with minimum supervision. This study explores the application of a novel sequencing batch-integrated fixed-film activated sludge membrane (SB-IFASM) process to treat tapioca processing wastewater for reuse purposes. The SB-IFASM employed a gravity-driven system and utilizes biofilm to enhance biodegradation without requiring membrane cleaning. The SB-IFASM utilizes the biofilm as a secondary biodegradation stage to enhance the permeate quality applicable for reuse. A lab-scale SB-IFASM was developed, preliminarily assessed, and used to treat synthetic tapioca processing industry wastewater. The results of short-term filtration tests showed the significant impact of hydrostatic pressure on membrane compaction and instant cake layer formation. Increasing the pressure from 2.2 to 10 kPa lowered the permeability of clean water and activated sludge from 720 to 425 and from 110 to 50 L/m2·h bar, respectively. The unsteady-state operation of the SB-IFASM showed the prominent role of the bio-cake in removing the organics reaching the permeate quality suitable for reuse. High COD removals of 63-98% demonstrated the prominence contribution of the biofilm in enhancing biological performance and ultimate COD removals of >93% make it very attractive for application in small-scale tapioca processing industries. However, the biological ecosystem was unstable, as shown by foaming that deteriorated permeability and was detrimental to the organic removal. Further developments are still required, particularly to address the biological stability and low permeability.
RESUMO
Background: Attempts to modify the morphology of membrane for application in industrial separation are being undertaken by many researchers. The present study discusses the morphological modification of polyvinyl chloride (PVC) membrane by combining the hydrophilic surfactant Pluronic F127 (PF127) in a polymer solution to improve the performance of the membrane. Method: The membrane is formed using the non-solvent induced-phase separation (NIPS) method. PF127 is added to the membrane solution as a membrane modifying agent. The effects of the surfactant concentration in the dope solution on the permeability of pure water, solute rejection, hydrophilic characteristics, and membrane morphology are investigated. Results: Higher concentrations of PF127 had a significant effect on the permeability of pure water. The highest membrane permeation was 45.65 l/m 2.hr.atm with the addition of 7% PF127 additive. Conclusion: PF127 is successfully proposed as a membrane pore-forming agent in this work; the blending of this additive in appropriate amounts in the polymer solution is adequate to improve the performance of the PVC membrane.