Underestimation of Sector-Wide Methane Emissions from United States Wastewater Treatment.

An increasing percentage of US waste methane (CH4) emissions come from wastewater treatment (10% in 1990 to 14% in 2019), although there are limited measurements across the sector, leading to large uncertainties in current inventories. We conducted the largest study of CH4 emissions from US wastewater treatment, measuring 63 plants with average daily flows ranging from 4.2 × 10-4 to 8.5 m3 s-1 (<0.1 to 193 MGD), totaling 2% of the 62.5 billion gallons treated, nationally. We employed Bayesian inference to quantify facility-integrated emission rates with a mobile laboratory approach (1165 cross-plume transects). The median plant-averaged emission rate was 1.1 g CH4 s-1 (0.1-21.6 g CH4 s-1; 10th/90th percentiles; mean 7.9 g CH4 s-1), and the median emission factor was 3.4 × 10-2 g CH4 (g influent 5 day biochemical oxygen demand; BOD5)-1 [0.6-9.9 × 10-2 g CH4 (g BOD5)-1; 10th/90th percentiles; mean 5.7 × 10-2 g CH4 (g BOD5)-1]. Using a Monte Carlo-based scaling of measured emission factors, emissions from US centrally treated domestic wastewater are 1.9 (95% CI: 1.5-2.4) times greater than the current US EPA inventory (bias of 5.4 MMT CO2-eq). With increasing urbanization and centralized treatment, efforts to identify and mitigate CH4 emissions are needed.

Quantification of Flavorants and Nicotine in Waterpipe Tobacco and Mainstream Smoke and Comparison to E-cigarette Aerosol.

INTRODUCTION: Waterpipe use remains popular among youth with the availability of flavored shisha tobacco being one of the main drivers of waterpipe use. Although waterpipe mainstream toxicant emissions are well understood, less is known about the carryover of flavorants such as vanillin, benzaldehyde, and eugenol. In this study, flavored waterpipe tobacco was analyzed for flavorants and nicotine, and subsequent carryover to mainstream smoke. METHODS: Flavorants vanillin, benzaldehyde, and eugenol, and nicotine were quantified in vanilla-, cherry-, and cinnamon-flavored shisha tobacco by gas chromatography/flame ionization detector and subsequently in waterpipe mainstream smoke generated by a smoking machine. The setup allowed for sampling before and after the water-filtration step. RESULTS: Flavorant and nicotine content in smoke was reduced 3- to 10-fold and 1.4- to 3.1-fold, respectively, due to water filtration. Per-puff content of filtered waterpipe mainstream smoke ranged from 13 to 46 µg/puff for nicotine and from 6 to 55 µg/puff for flavorants. CONCLUSIONS: Although water filtration reduced flavor and nicotine content in waterpipe mainstream smoke, the detected flavorant concentrations were similar or higher to those previously reported in e-cigarette aerosol. Therefore, users could be drawn to waterpipes due to similar flavor appeal as popular e-cigarette products. Absolute nicotine content of waterpipe smoke was lower than in e-cigarette aerosol, but the differential use patterns of waterpipe (>100 puffs/session) and e-cigarette (mostly <10 puffs/session, multiple session throughout the day) probably result in higher flavorant and nicotine exposure during a waterpipe session. Strategies to reduce youth introduction and exposure to nicotine via waterpipe use may consider similar flavor restrictions as those for e-cigarettes. IMPLICATIONS: Although waterpipe mainstream smoke is well characterized for toxicants content, little is known about carryover of molecules relevant for appeal and addiction: flavorants and nicotine. This study shows that flavorant content of waterpipe mainstream smoke is comparable or higher than e-cigarette aerosol flavorant content. Regulatory action to address tobacco use behaviors targeting the availability of flavors should also include other tobacco products such as flavored shisha tobacco.

Establishing structure-property-hazard relationships for multi-walled carbon nanotubes: the role of aggregation, surface charge, and oxidative stress on embryonic zebrafish mortality.

Increasing use of carbon nanotubes (CNTs) in consumer and industrials goods increases their potential release, and subsequent risks to environmental and human health. Therefore, it is becoming ever more important that CNTs are designed to reduce or eliminate hazards and that hazard assessment methodologies are robust. Here, oxygen-functionalized multi-walled CNTs (O-MWCNTs), modified under varying redox conditions, were assessed for toxic potential using the zebrafish (Danio rerio) embryo model. Multiple physicochemical properties (e.g., MWCNT aggregate size, morphology, and rate; surface charge and oxygen concentration; and reactive oxygen species (ROS) generation) were characterized and related to zebrafish embryo mortality through the use of multivariate statistical methods. Of these properties, surface charge and aggregate morphology emerged as the greatest predictors of embryo mortality. Interestingly, ROS generation was not significantly correlated to observed mortality, contrary to prior predictions by nanotoxicology researchers. This suggests that the mechanism of MWCNT-induced mortality of embryonic zebrafish is physical, driven by electrostatic and shape effects, both of which are related to nanomaterial aggregation. This raises the importance of rigorously considering aggregation during aqueous-based nanotoxicology assays as nanomaterial aggregation can affect perceived nanomaterial toxicity. As such, future nanotoxicity studies relying on aqueous media must sufficiently consider nanomaterial aggregation.

Performance and Sustainability Tradeoffs of Oxidized Carbon Nanotubes as a Cathodic Material in Lithium-Oxygen Batteries.

Climate change mitigation efforts will require a portfolio of solutions, including improvements to energy storage technologies in electric vehicles and renewable energy sources, such as the high-energy-density lithium-oxygen battery (LOB). However, if LOB technology will contribute to addressing climate change, improvements to LOB performance must not come at the cost of disproportionate increases in global warming potential (GWP) or cumulative energy demand (CED) over their lifecycle. Here, oxygen-functionalized multi-walled carbon nanotube (O-MWCNT) cathodes were produced and assessed for their initial discharge capacities and cyclability. Contrary to previous findings, the discharge capacity of O-MWCNT cathodes increased with the ratio of carbonyl/carboxyl moieties, outperforming pristine MWCNTs. However, increased oxygen concentrations decreased LOB cyclability, while high-temperature annealing increased both discharge capacity and cyclability. Improved performance resulting from MWCNT post-processing came at the cost of increased GWP and CED, which in some cases was disproportionately higher than the level of improved performance. Based on the findings presented here, there is a need to simultaneously advance research in improving LOB performance while minimizing or mitigating the environmental impacts of LOB production.

A framework for sustainable nanomaterial selection and design based on performance, hazard, and economic considerations.

Engineered nanomaterials (ENMs) and ENM-enabled products have emerged as potentially high-performance replacements to conventional materials and chemicals. As such, there is an urgent need to incorporate environmental and human health objectives into ENM selection and design processes. Here, an adapted framework based on the Ashby material selection strategy is presented as an enhanced selection and design process, which includes functional performance as well as environmental and human health considerations. The utility of this framework is demonstrated through two case studies, the design and selection of antimicrobial substances and conductive polymers, including ENMs, ENM-enabled products and their alternatives. Further, these case studies consider both the comparative efficacy and impacts at two scales: (i) a broad scale, where chemical/material classes are readily compared for primary decision-making, and (ii) within a chemical/material class, where physicochemical properties are manipulated to tailor the desired performance and environmental impact profile. Development and implementation of this framework can inform decision-making for the implementation of ENMs to facilitate promising applications and prevent unintended consequences.